BEST GUN FOR PRESSURE WASHER. SUPER NICE.

Подписаться 82 тыс.

Просмотров 239 тыс.

50% 1

BEST GUN FOR YOUR PRESSURE WASHER SETUP. I have used the OG Spec Mosmatic spray gun now for 6 months and it is by far one of the best pressure washer products that I have used. Great build quality and perfect for auto detailing. The Live swivel is great. The trigger is easy to pull and feels great in the hand. The rubber protected tip prevents any mishaps on the paint. This is by far one of the top pressure washer products out there. I always enjoy using my wall mounted pressure washer system. It is one of my favorite tools in my garage. I put links below for you to check out the spray gun. I also listed links to a less expensive alternative.
If you have any questions about the Mosmatic Spray Gun please feel free to ask in the comments. If you have a suggestion on a future video don’t hesitate to ask. I hope you enjoy the video and if you do please consider sharing and most important subscribing. Hitting the like button and commenting lets RU-vid know that you liked the video and it will recommended it others. Thanks for your support.
The difference between the OG Spec top of the line version and the less expensive original Mosmatic spray gun is the recessed live inlet swivel as well as the ultra high end stainless steel quick disconnects. The live swivel reduces hose connection bulk and the high grade disconnect works great and is the most used connection on the system. (Switching from the spray nozzle to the foam cannon) A cheap fitting here is noticeable. There is a 58 dollar difference at the time of this filming (For the reviewed short gun) but the value of these components are well worth the money in my opinion. I have included some links to less expensive alternatives to accommodate those that may be interested in a more affordable yet still high quality version. The MTM versions I listed below are another really good option but are less quality than the Mosmatic options. Here is the breakdown. OG Mosmatic (Best option) Original Mosmatic (Second Best option) MTM (Third best option) All are great tools....
Links to the Spray Gun Setup.
OG Top of the line versions (Best)
Short Gun
OG Spec Mosmatic High Pressure Sprayer w/ Quick Disconnects bit.ly/2LnHwLd
Complete Mosmatic Stainless Nozzle Assembly (40 Degree) bit.ly/35sLcT8
Short Gun & Wand & Tip
Complete OG Spec Mosmatic Swiveling Sprayer & Wand bit.ly/3BCWdl8
Less expensive alternatives
Short Gun
Original Mosmatic High Pressure Sprayer w/ Built In Swivel bit.ly/3oC8KvE
Complete Mosmatic Stainless Nozzle Assembly (40 Degree) bit.ly/35sLcT8
MTM SGS-28 Swiveling High Pressure Sprayer bit.ly/3hLKtBi
Short Gun & Wand & Tip
Complete Original Mosmatic Swiveling Sprayer & Wand Solution bit.ly/3oCaNQ4
Complete MTM Swiveling Sprayer & Wand Solution bit.ly/3s0INIU
Less expensive Amazon alternatives
Short Gun
MTM Hydro SGS-28 High pressure Sprayer amzn.to/2MdXKaN
Short Gun & Wand & Tip
MTM SGS28 Spray Gun, & Stainless Steel Bent Lance w/Boot Fittings amzn.to/398b6fU
Pressure washer video with links to all the parts in the description • Auto Detailing Wall Mo...
Check out my website www.hawaiidetailing.com/
SUBSCRIBE / @hawaiidetailing
RU-vid / @hawaiidetailing
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiidetailinghq
TIKTOK / hawaiidetailing
PLAYLISTS
PRESSURE WASHER • Pressure Washer
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
GRILL • Grill Videos
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.

Авто/Мото

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@HawaiiDetailing 3 года назад

Due to a lot of questions about the difference with the less expensive Mosmatic original version Short gun I updated the description to discuss this topic. Long story short the High end version has a recessed live swivel and a ultra high grade disconnect. There is a price difference but in my opinion its money well spent. I like mine a lot and have used all types of sprayers over the years. I added links to the description to show all the different affordable options that I believe are great tools to own.

@rafars2246 3 года назад

I got mine for $30 after a coupon on eBay, it is called Suttner ST-2605. Same exact gun but without built in swivel. Mosmatic doesn't make guns, Suttner does for them. As for the swivel, I installed my own for a half the price of the Mosmatic, and way better. Also the female quick connect I installed is way better than the Mosmatic. Total cost of my completed gun $65, and again, way better than that. Mosmatic is a fraud company. So overpriced...

@HawaiiDetailing 3 года назад

@@rafars2246 There are plenty of pressure washer component options out there to suit each persons needs. Amazon and Ebay are full of them. This is the setup that I purchased and it has worked flawlessly for me. That is why I speak so highly about it. It showed up ready to go and looks and operates amazing. Fittings are small, function very well and gun and swivel looks minimalist too. No guess work or trial and error. I am personally not a big Ebay buyer but if you look around on there enough you will find some good deals. Always feels like I am lucky to get what I ordered with the ebay way of doing business. I am glad you found an option you are happy with. Thanks for watching.

@rafars2246 3 года назад

@@HawaiiDetailing Amazon have lots of stuff, but lacks quality pressure washing products unfortunately. Except for those overpriced brands everyone knows. The extra chunk of metal doesn't bother me, but of course an integrated swivel looks better I guess. I had both, when it comes to feeling while working I feel no difference. Professionals use Suttner, General Pump, Northstar etc. Those are big players.

@Rais1959 3 года назад

Very true. Mosmatic is a rip off. Very high on price. I feel there is very large margin and if they reduce the price which will increase sales volume. What Rafa mentions is absolutely true. Have nice time guys n all the best

@dmachorro 2 года назад

@@rafars2246 Can you send links to the products your talking about. I also feel the OG is way over priced.

@amallica Год назад

I like you. You aren’t arrogant. You are humble. Love this about you!

@HawaiiDetailing Год назад

Thanks a lot. I appreciate it

@marksizemore3371 3 года назад

I got the Kranzle 1322 wall mount system from OG and love it. I also love the spray gun as it's so easy to use without fighting the hose all the time. Good review; keep up the good work and putting out quality videos. Yeah!!

@HawaiiDetailing 3 года назад

Thanks a lot. I appreciate it. A Kranzle is in my future for sure.

@letslearn2gether145 2 года назад

Perfect spray gun for mobile detailing 👍

@bernardhiemanto4426 3 года назад

Great set up, very simple n clean review. You and matt moreman rocks

@HawaiiDetailing 3 года назад

Thanks a lot. Glad you enjoyed and thanks for watching.

@nomad509 Год назад

Hey Jeremy I was looking into the archives tonight and found this gem. Later that year I bought the the Active v52 Ultimate OG pressure washer solution with zero hands on experience with the lesser quality tools and thankfully OG spared me the disappointing results using the janky crap. I was delighted and had a blast washing my mother's SUV for her late Mother's Day gift with the OG spec swiveling Mosmatic sprayer!

@HawaiiDetailing Год назад

Great to hear. Good tools make all the difference. Thanks for watching

@jimmyemond8213 3 года назад

Really like your videos every time I look at one. Cheers again from Quebec, Canada 🇨🇦!

@HawaiiDetailing 3 года назад

Thanks a lot. I appreciate it.

@216baja 3 года назад

Very good review and great tips. Thank you for the content. 🙏

@HawaiiDetailing 3 года назад

Thanks for watching. I appreciate it.

@SSPDIVING 2 месяца назад

Just used a pressure washer underwater to clean a ship. I can attest hose binding and a hard to pull trigger sure gave my arm a workout. I will try a swivel and easy pull trigger next time for sure! Thanks for the tips!

@HawaiiDetailing 2 месяца назад

No problem.

@carl16760 3 года назад

the Chemical Guys Torq is a good one. bumped up from the stock for my machine 3.0 to a 3.5 orifice tip. works outstanding. throws a soft cloud of water over the paint.

@HawaiiDetailing 3 года назад

Thanks for sharing. Thanks for watching I appreciate it.

@peteshelby21 2 года назад

Love Love your channel bruh 🤙🏽 Shout out from Florida. Thanks for all your help

@HawaiiDetailing 2 года назад

Thanks for watching

@Galaxylynx12 3 года назад

Karcher on the shelf plus plenty of hose- geeezz I Iove this setup!!

@HawaiiDetailing 3 года назад

Yeah. I like it a lot too. Makes detailing more enjoyable. Thanks for watching

@Galaxylynx12 3 года назад

@@HawaiiDetailing great job!

@cheferman65 2 года назад

For those who know...It's all about the experience. Great review J . Tip about the tip...$ well spent.

@HawaiiDetailing 2 года назад

Thanks. I appreciate it. I agree. Might as well enjoy the process. That’s a what it’s all about.

@RaldasDetails 3 года назад

Awesome want to buy one soon!! 😎👍🏼 great video bro!!

@HawaiiDetailing 3 года назад

Thanks a lot. It’s a great sprayer. Its worth every penny. One of my favorite tools in the garage for sure.

@richlee509 3 года назад

Brilliant they are

@rubencarlosgutierrez6458 3 года назад

Nice system , 👍👍👍regards from México

@HawaiiDetailing 3 года назад

Thanks a lot. Hola and thanks for watching.

@unions100 3 года назад

Am in love with the great set up 👌 great review ❤️👍👌

@HawaiiDetailing 3 года назад

I appreciate it. Thanks for watching

@unions100 3 года назад

Uv earned my subscription 👍

@HawaiiDetailing 3 года назад

Thanks

@Mr.grubby 3 года назад

I like ur set up 👍😎

@HawaiiDetailing 3 года назад

Thanks a lot.

@J1Z06 3 года назад

Very nice setup.

@HawaiiDetailing 3 года назад

Thanks. Thanks for watching.

@Mexicanracing Год назад

Clean garage 👌

@HawaiiDetailing Год назад

Thanks

@Zeron18 Год назад

I have the sgs28 and that thing is extremely durable. I drop it, drag it around and it’s still working like a champ. I don’t think I’m worthy of owning a high dollar pressure washer gun because of how negligent I am.

@jtm1979 2 года назад

I have the european version with mosmatic gd's which dont have the integrateg plug and imo thats a good thing. Believe or not but those plugs wear out in time, even my mosmatic plug which is like 1,5 years old has noticeable wearing on it. So imo integrated plug is not good. That little bit of bulk doesnt matter at tall, atleast it is replaceable. Other thing is that i also have MTM SGS35 european version and it is also very good gun. Mosmatic swivel is 10/10 and MTM swivel is 9+/10, but i think SGS might be bit more ergonomic. Both swivels under pressure, mosmatic is just tiny bit more fluid but not much real world difference. Great channel btw :)

@HawaiiDetailing 2 года назад

Thanks for sharing your thoughts and watching the channel. I appreciate it

@ac14081408 Год назад

The new OG Mosmatic sprayer would go great with a 1/4 inch uberflex hose. Reason why is because the new Mosmatic connection is tight up into the sprayer, which runs closer parallel to your wrist. When moving your wrist around, less fatigue. Your fighting less with off axis pivot points. So a 1/4 inch uberflex hose would complement this by being very flexible. That’s the route I’m going anyway.

@HawaiiDetailing Год назад

Thanks for sharing. Let us know how you like it.

@1ronhall 3 года назад

Nice work

@HawaiiDetailing 3 года назад

Thanks. I appreciate it.

@a4elo Год назад

Can you use any heat shrinking sleeve for your hose?

@urbandetailology664 3 года назад

That CG VRP in the background got me dead.

@HawaiiDetailing 3 года назад

One of the few products that I like from them. Thanks for watching

@javierperez4966 2 года назад

Hello Jeremy Love your videos. Love your humble attitude. I had a question regarding the orifice size for the tip. I have the same pressure washer, karcher 1700. What is the correct size you recommend? Thank you for your time

@HawaiiDetailing 2 года назад

Look at my video about this machine. I talk about that and there is links in the description. Thanks for watching

@SpotlessWaterGuy 3 года назад

The mosmatic sprayer is just an amazing tool. I also have one and love it. What I don’t have is the mosmatic rubber tip. I noticed on obsessed garage they have a bunch of different orifice sizes. If I’m not mistaken the Kranzle needs at least 4.0 orifice size but they go up from there. Any insight you can provide?

@HawaiiDetailing 3 года назад

Thanks for watching. I don’t know the orifice size for the kranzle off hand. I can look into it for sure.

@SpotlessWaterGuy 3 года назад

@@HawaiiDetailing I think I found it 👍 support.obsessedgarage.com/hc/en-us/articles/360057372373-Pressure-Washer-Fittings-101-Spray-Nozzles

@ac14081408 Год назад

Yes the 1322 is 4.0

@teslamark3305 3 года назад

I’m running the same PW but will be upgrading to this gun as well. In regards to the 40 degree tip, what would be the appropriate orifice for the Karcher 1700? I see many choices on the OG website.

@HawaiiDetailing 3 года назад

3.0 for the Karcher 1700.

@cebasmb8250 3 года назад

New subscribers bro 🙌 great video

@HawaiiDetailing 3 года назад

Thanks. Glad you like it.

@cebasmb8250 3 года назад

@@HawaiiDetailing and the way you talk and do the videos it's fun brother I laugh 😆

@MuhammadTariq-pq5fr Год назад

Good.

@HawaiiDetailing Год назад

Very good

@overlandvan8833 Год назад

I just received my Active 2.0 pressure washer and i want to upgrade to this spray gun. What orfice size should i use with this spray gun?

@CHIPOTLEchuck 3 года назад

1k 🥳

@HawaiiDetailing 3 года назад

Yeah. Pretty happy about it. Thanks.

@ichenkrog5094 3 года назад

I have karcher hd 5/11 cage classic and i want to use the mosmatic gun like yours. But i worried it can work with my hd 5/11 because it's not cheap too. Is the mosmatic gun and wand, kobrajet hose compatible with my hd 5/11 ?

@HawaiiDetailing 3 года назад

I am not familiar with the specifics of that unit but the hose will need to be adapted to fit the sprayer. The gun has a 3-8 male plug connection so you would need a 3/8 female quick connector on the hose side. I am not sure of the fittings that are on there now so I can’t recommend what to get to adapt it.

@NewShockerGuy 2 года назад

Great video! I'm getting pretty much this whole setup minus the pressure washer (AC Blue 630TTS) but had a question on your kobra jet hose and cox reel. What size are they? IE: I'm trying to decide if I need a 75' hose compared to the 50'. And I know the Cox reels come in a larger size to accomidate the larger hose. When I measured from where I want to install the hose reel to the cars in my drive way the 50' will easily go to the FRONT of the car, but I can't make a complete circle as I would with a 75' hose. From your experience does one go all the way around a vehicle or would you do one side , then walk around the other side and to the spraying of the car? IE: I don't want to trip over a 75' hose because it's TOO long, but wasn't sure if the 50' and having to to 3/4 of the car then walk around the vehicle to do the other side makes sense (I hope I explained that properly)

@HawaiiDetailing 2 года назад

I have a 100’ hose. In my opinion longer is better. You do not have to unwind any more hose then you need but it’s there if you want or need it. The unwound hose will just remain on the reel during use. If you need more hose length to get around the car or reach another area at least you will have it. Small upfront cost but worth it. Hope that helps. Thanks for watching and supporting the channel.

@NewShockerGuy 2 года назад

@@HawaiiDetailing Excellent point! I appreciate you taking the time to answer back! I've been watching all your videos! Love your chill vibe. Very enjoyable to watch. I'm going with the 75' hose just to be safe and like you said, have extra hose just in case! Never would I have thought about having a setup like this until I started watching your videos and seeing how nice it is. I really do enjoy washing/detailing our cars but having to drag out the gas power washer, and the NOISE it makes... it just isn't enjoyable, when I have to wear ear plugs and turn it on/off/on/off...etc. With the electric one I'm getting I think I'll be washing cars more often because it will be more enjoyable! Aloha!

@dodge20071 3 года назад

New subscriber! Great setup in your shop. Just got my 1322 from OG. Can’t wait to get it setup. Also those stainless trays behind you where did you get them?

@HawaiiDetailing 3 года назад

Thanks a lot. Glad you like it. Here is a link to my pressure washer video. In the description is the links to the bottle shelves so you can check them out. They are under Garage items. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UFek14zDrVw.html

@slittcerslitt-sir7722 Год назад

I got my OG spec gun and was wondering if yours also opens the flow completely when you barely pull the trigger? It seems like mine has full on flow before getting to the halfway point before the click . Not sure if this is normal or if there shouldn't be any flow until you get past the click. Thanks!

@HawaiiDetailing Год назад

Yes. That’s normal. The click is to make holding it in the on position easier. Thanks for watching.

@fernandopalomares5716 Год назад

Do you have a hose review? Been trying to find a great hose for the best price

@spacecoastbonsai1421 2 года назад

What’s other guns that are as good of quality as this but a little cheaper? I can use this on my 4200psi 4 gallon a minute machine right? I don’t have a soft wash set up. I was wanting to get it to do house washing and maybe just use a nozzle with a bigger hole. My problem is I have an suv with a cargo carrier I’m just getting started. One day I plan to get a soft wash set up but until then do you think it’s necessary to upgrade to a short gun like this?

@HawaiiDetailing 2 года назад

In the description I have some less expensive alternatives that are good. Check those out.

@Ole_Lige Год назад

I have a larger gas washer with an ST-2000 gun. I noticed the inlet to the gun is a 3/8 male quick connect. Instead of me buying another gun for my Ryobi electric washer, can I just buy a 1/4 quick connect and change out as needed ?

@HawaiiDetailing Год назад

Yes. For sure. I have a quick disconnect on mine and can change the gun out quickly if needed.

@11am44n 2 года назад

Which nozzle size and spray angle did you purchase for the quick connect rubber tip?

@HawaiiDetailing 2 года назад

I have all the sizes in the description. Thanks for watching

@imdustyjames 3 года назад

That’s intro looked like the start to a good movie

@HawaiiDetailing 3 года назад

Thanks. Yeah a little dramatic.

@dodge20071 3 года назад

@@HawaiiDetailing thanks man. Watched it and posted a comment.

@bradgiez6192 3 года назад

I had to pressure wash for 6 hrs at a time using a crap gun at 4000psi it's tough. today I just ordered a MTM SGS-28 I was tossing the idea of just getting a SG 28 and adding a MTM cheaper brass Swivel which is around $15-30 depending on the model Swivel. I'm still wondering if I made the right choice the as I would only be saving about $25 Plus I'm not building it.

@HawaiiDetailing 3 года назад

Thats a tough call. Up to you. I have had mtm they are nice guns. Thanks for watching.

@willishiland6069 3 года назад

Great video and thanks for sharing! Stay Safe Guys!

@HawaiiDetailing 3 года назад

Thanks and Thanks for watching

@lsosa3743 3 года назад

I have to agree with your video. I got the MTM gun, and my hand gets tired from the grip, and I have gotten pinched multiple times as pressure builds up on the washer, and suddenly the gun trigger is not smooth. I did notice the swivel not very smooth with or wo pressure. I wish I would have waited and seen this review sooner.

@HawaiiDetailing 3 года назад

Thanks for watching and sharing your thoughts.

@SeaFoamSparkles 2 года назад

Sgs28 or sgs35?

@pantac4493 Год назад

I have MTM sgs28 and no problems with grip, can use 1 finger, nothing compared to stock guns. Swivel could be looser but not sure I even need it, the quick disconnect rotates freely when trigger isn’t being pressed

@daddypapi3842 3 года назад

Love your videos...pls advise the model number of the grey Kobrajet hose. The links you provided shows a blue hose at OG and the other is a 75 foot. Thank you!

@HawaiiDetailing 3 года назад

Don’t think the 100’ is available on Amazon anymore. Sorry. Thanks for watching

@daddypapi3842 3 года назад

After using your water hose, do you have to roll out 100 feet of hose before rolling it in back in? When using a portion of hose, say 50 feet, do you experience hose problems when using in future? Thank you.

@HawaiiDetailing 3 года назад

@@daddypapi3842 no just roll out what you need. No problems at all.

@Lg1969 Год назад

What are your thoughts on the MTM Hydro Acqualine SGS35 & 20" Stainless Lance ??

@HawaiiDetailing Год назад

I bet it’s pretty good. Only held one once and it’s kinda bulky in comparison but it seemed pretty good.

@michaelhealthandfitnesstra4540 2 года назад

are the mosmatic sprayer links for both obsessed garage and the one from amazon (not og spec) the same sprayer ? When I click on the amazon it says its from "The Clean Garage" And the other link is from "Obsessed Garage"

@HawaiiDetailing 2 года назад

They are not the same. Not OG spec or branded. I would go with the OG link. That’s what I have. I have had it a long time and have not had any issues. I like it a lot.

@iscreamkidsyt 8 месяцев назад

Great videos. Thanks alot for the information. What size orifice would you recommend for the karcher k2 to get 2 gal a min. Thanks. Keep it up

@HawaiiDetailing 8 месяцев назад

I am not familiar with that kit but On my 2.1 GPM Kranzle I use a 4.0. Makes 2.1 @ about 900 - 1000 psi ish.

@HawaiiDetailing 8 месяцев назад

Check out my website for all the details on my kit. www.hawaiidetailing.com/wallmountedpressurewasher

@MuhammadAbdullah-mq5cv 3 года назад

I have EXi 875 Briggs & Stratton 190cc, 8.75 ft-lbs gross torque, 3100 Max PSI@ 2.1 GPM 4.5 Max GpM @150 psi and Rotary surface cleaner 4000psi 7 US GAL/Min, both are new. Please advice me how to connect both of them? Are both a good combintion to get best results .? Please Advise.

@HawaiiDetailing 3 года назад

Sorry I am unfamiliar with that equipment. The best way is to put a quick disconnect on the pressure washer and the go from there. I recommend a high quality hose with another disconnect that connects to whatever attachments you want. That’s the easiest way. Thanks for watching

@michaelrich7466 3 года назад

Can you make a video on how you got the soap dispenser out of your karcher?

@HawaiiDetailing 3 года назад

I don’t have it anymore. I took it apart to paint the Karcher front panel and never put it back. Kinked the hose with a zip tie. Thanks for watching.

@Sam-kw9wd 5 месяцев назад

What hose are you using? Also, is OG guns 14mm? I have the sg28 but its a 15mm.

@HawaiiDetailing 5 месяцев назад

Here are detailed links to everything I am using. Thanks for watching www.hawaiidetailing.com/wallmountedpressurewasher

@ronniechristie5599 3 года назад

What is this Pressure washer cold what is the make so we can check it out would be nice

@HawaiiDetailing 3 года назад

Here is my setup. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UFek14zDrVw.html

@JPaz805 3 года назад

Trigger pressure is a big highlight. I find my forearms get exhausted with a regular trigger after a few minutes of holding it down

@HawaiiDetailing 3 года назад

Yeah this sprayer is a great tool for sure. Can hold this one a long time with no problem. Thanks for watching.

@antnope3042 2 года назад

I prefer the Mtm sgs35 that 316 stainless steel ❤️ better than the MoS 304 stainless will last much longer in my opinion it’s made with better material

@mle8603 3 года назад

With your Karcher 1700, what orifice size did you select for your mosmatic tip?

@HawaiiDetailing 3 года назад

Thanks for watching. Check out this vid. In the description it has a link for the tip and sizes you will need for the k1700. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UFek14zDrVw.html

@mle8603 3 года назад

@@HawaiiDetailing Thanks brotha, I found out the specs required for the K1700, 3.0 orifice with 40 degree nozzle. By the way, your garage is looking awesome. You should do a tour video and showcase the entirety of it!

@HawaiiDetailing 3 года назад

@@mle8603 thanks. I will definitely consider it.

@user-hw1gh4te4p 2 года назад

i just got my mosmatic original, not the og spec and the swivel is not as smooth as urs...is that the diff between the 2?

@HawaiiDetailing Год назад

The OG version is definitely a good tool. I am not sure what components they use on the stock version. I have never used one. Thanks for watching

@tradeswithjohnnie 2 года назад

Should had demo of what you talk about. We need to see it in action

@HawaiiDetailing Год назад

Yes I agree. I will do a better video in the future. In the mean time almost all my videos are of me using this tool detailing cars. Check a few out and see what you think. Thanks for watching.

@gearlstrickland3365 2 месяца назад

Active gun is good

@stephan6439 Год назад

I have the stihl re 110, does this gun fits on that one?

@HawaiiDetailing Год назад

With a quick disconnect set up it will fit on any hose.

@bfilz 3 года назад

Nice video...would have been nice to see the gun in action.

@HawaiiDetailing 3 года назад

Good point. Thanks. I use it in every one of my detailing videos but I I should have been thinking about the people new to my channel. I will show it again soon. Thanks for the feedback.

@bfilz 3 года назад

@@HawaiiDetailing All good brotha...I'm enjoying the videos!

@mikebennett3732 3 года назад

Cool set up, where do you get the hose and real?

@HawaiiDetailing 3 года назад

Here is the vid and all the links are in the description. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UFek14zDrVw.html Thanks for watching

@micarta-ed2ut Год назад

Just got my OG Mosmatic gun in today. Does yours have any free play in the trigger? Mines a bit loose and wiggles when it’s not being pulled. Action otherwise feels pretty nice.

@HawaiiDetailing Год назад

Nothing to wobbly. Just normal tolerances. It’s a great gun. Had it for years and still going strong. Worth every penny. Thanks for watching

@micarta-ed2ut Год назад

@@HawaiiDetailing I tried it out with the 20" wand on our Shelby today. First impressions in use are good. This hobby is starting to get expensive but I'm liking it a lot.

@crisworkizer 2 года назад

On a commercial side we use spraying systems guns. Gun Jet 80

@HawaiiDetailing 2 года назад

I will look at them. Thanks

@desimunda7515 2 года назад

Hi can you share the link where from I can get this all pressure washer and accessories thanks

@HawaiiDetailing 2 года назад

The links are in the description. Thanks

@69spanks 3 года назад

If I wanted to use it with my 5 gpm, 3000psi power washer to occasionally wash vehicles, do you think it would hold up?

@HawaiiDetailing 3 года назад

For sure. I don’t know of a better built gun out there. It’s pricey but well worth it IMO. Thanks for watching.

@mrDmastr19 3 года назад

How do you tune down the pressure washer to 1,000 psi ?

@HawaiiDetailing 3 года назад

With the proper nozzle orifice for your machine. There is a link to the one that works for my machine in the description. It’s a killer nozzle too. Thanks for watching

@bernardobito-on3936 Год назад

Where did you buy the nozzle for the pressure washer?

@HawaiiDetailing Год назад

There are links in the description. Thanks for watching

@marcusbarnes5929 2 года назад

How does it compare to the MJJC or the MTM.?

@HawaiiDetailing 2 года назад

I like it a lot better. Personal preference though. Thanks for watching

@briansek1847 2 года назад

I have the MTM SGS-28; to me since I have a cheap Ryobi gas pressure washer it does the job. I’ll upgrade to a electric pressure. Possibly a Karcher or ar blue then I’ll consider getting the OG spec and use the SGS 28 as a backup

@HawaiiDetailing 2 года назад

Good plan. Thanks for watching

@dannyzamudio1252 2 года назад

@@HawaiiDetailing how's the mtm sgs 28?

@HawaiiDetailing 2 года назад

@@dannyzamudio1252 it’s a great lower cost alternative to the mosmatic. I had one for a while and it worked well. Thanks for watching

@maynorjena5457 Год назад

what orifice did you choose for the og spec tip ?

@HawaiiDetailing Год назад

What PW do you have?

@maynorjena5457 Год назад

giraffe tools pw plus+

@kenbailey1279 3 года назад

How does it hold up to drops?

@HawaiiDetailing 3 года назад

I have not dropped it hard enough to find out but the build quality of the casing is as good or better than any gun I have seen so I imagine it would handle it.

@GritGrindGrow Год назад

Tony hawk makes videos about pressure washers now?

@BigHomie030 2 года назад

Do you have a foam cannon you recommend for this swivel sprayer

@HawaiiDetailing 2 года назад

These are my 2 favorites Thanks for watching www.mjjc.com/collections/foam-cannon/foam-cannon-pro/?ref=258 and bit.ly/32wKdmN

@BigHomie030 2 года назад

@@HawaiiDetailing which would you lean more towards too and why. I been eyeing the mt22 myself but I wanted to ask you first

@HawaiiDetailing 2 года назад

@@BigHomie030 I like the MJJC for thickest foam. MTM is an older work horse that lasts forever but needs a few updates. I did a foam cannon battle video where I compared them. Check it it.

@BigHomie030 2 года назад

@@HawaiiDetailing ok sounds good thanks

@BigHomie030 2 года назад

What about chemicals? Does this have good resistance as far as chemicals?

@thierrylerinckx1340 3 года назад

Interesting. That gun costs more than my Kärcher K4 premium. It better be very very good.... Or gold plated.

@HawaiiDetailing 3 года назад

Yeah it’s expensive. Great gun. I bought mine over a year ago and I like it a lot. This is a case where you get what you pay for. There are cheaper options out there that are good also. Thanks for watching.

@donvoss1085 3 года назад

Suttner st-2305 is the best gun I’ve used. It’s cheaper but looks comparable to this

@HawaiiDetailing 3 года назад

Thanks for sharing.

@MatthewHurtado 3 года назад

First

@HawaiiDetailing 3 года назад

Yeah thanks for always watching the vids. I appreciate it.

@marcosmarquez2926 2 года назад

Where is the pressure Washer mount from

@HawaiiDetailing 2 года назад

Look at my pressure washer video. I have links to everything in the description. Thanks for watching

@jameshovey8301 3 года назад

How do u do a video on the best spray gun and not even spray it?

@HawaiiDetailing 3 года назад

I spray it in about 95% of my videos. Check a few out. Next time I will spray it. Thanks for the suggestion.

@pedrodenis8658 3 года назад

What models is this pleases

@HawaiiDetailing 3 года назад

The link to the exact model is in the description. Thanks for watching.

@SeaFoamSparkles Год назад

Will you ever review the sgs35

@HawaiiDetailing Год назад

I plan to do a review of it soon. Thanks for the suggestion

@SeaFoamSparkles Год назад

@@HawaiiDetailing thanks man knew I could count on you. MTM good brand but I love that blue color

@HawaiiDetailing Год назад

@@SeaFoamSparkles I have owned one in the past. It’s a great tool but falls short of this one by a descent margin. If you are on a budget and want to save some money the MTM will work great for you. You can always upgrade later.

@SeaFoamSparkles Год назад

@@HawaiiDetailing yes sir that’s right, I’m sure you know this feeling but I’m borderline OCD about using what products I use

@Hasb1i 3 года назад

Do you wash the car with distilled water ?

@HawaiiDetailing 3 года назад

No I do not. Thanks for watching.

@raulvalle4920 2 года назад

Where did you buy it

@HawaiiDetailing 2 года назад

Links are in the description. Thanks for watching

@mingyang4901 Год назад

here to comment how nice your pressure washer wall mount shelf setup is

@HawaiiDetailing Год назад

Thanks

@AmanecerLosAngeles 3 года назад

Wow! That’s expensive.

@HawaiiDetailing 3 года назад

Yea it is. There is no doubt. This is a great tool money permitting but I did list my second choices that are a lot more affordable in the description. This is for the connoisseur of pressure washer components. Thanks for watching and commenting.

@jrose7381 3 года назад

Think the original mosmatic gun is like $60. Don’t think paying extra just to have the rubber tip is worth double? When you have to change the couplers the mosmatic ones are super expensive I believe?

@HawaiiDetailing 3 года назад

The tip is a separate item. I think that you should use the one you have if you are happy with it. If and or when it comes time to change it out I would definitely consider this model. Thanks for watching.

@jrose7381 3 года назад

@@HawaiiDetailing the only thing I don’t get is why do you recommend for us to pay almost double when the only difference is a slightly shorter swivel? Everything else is the same from both mosmatic guns.

@HawaiiDetailing 3 года назад

I definitely do not recommend buying anything that does not fit your budget or match the way you plan to use it. There are however big differences with these guns. Recessed live swivel, high end disconnect, rubber shielded tip, etc. My channel is all about showing the best products that are available to us and when able showing or discussing the affordable alternatives as long as they offer the high end professional user experience. This gun is a high end version for sure. I think its totally worth it and it is the nicest gun on the market in my opinion. I would definitely not get rid of what you have if you are happy with it. If and when you need an upgrade I would consider this product if the extra bits that it offers are worth it to you. This industry has a lot of product and tool options available and you can always find someone out there to say their products are great. I try to offer my honest opinions and test products that I buy so that you can know what to expect when you buy them. I hope this helps and I appreciate you watching my videos and asking the questions that are important to you.

@jrose7381 3 года назад

@@HawaiiDetailing sorry I didn’t mean it in that way that we should spend out of our budget. Just wanted to get clarification on why pay considerably more for very minor differences. Not sure if there was something I was overlooking or missed. Btw. Have to thank you for taking the time to share this info with others in the first place.

@HawaiiDetailing 3 года назад

@@jrose7381 you are welcome. Any time you have a question don’t hesitate to ask.

@MasteringHow-To 2 года назад

Mosmatic makes the best pressure washer gun. Second is a Mtm Hydro third is a suttner. The suttner doesn’t have a built in swivel. Mosmatic makes the best swivel on the market. Have mine for ten years. Each gun gets used 8-9 hours a day. Car wash. Go to kleen rite or sonnys or Dultmier to get these guns. I do not use quick disconnects as they shorten the life. Good for detailing. Horrible for long term use.

@MasteringHow-To 2 года назад

As for lances. Mtm and mosmatic 20in bent is the best and lightest on the market

@HawaiiDetailing 2 года назад

Thanks for sharing your thoughts. I like my mosmatic a lot. Works well. Thanks for watching

@pantac4493 Год назад

What do you mean about quick disconnect shorten life, of what? I don’t use mine 8 hours a day, only occasional wash it’s much more convenient using quick disconnect and hasn’t failed me yet

@NeoB-Lac 3 года назад

What nozzle is that brotha

@HawaiiDetailing 3 года назад

40 degree. I put a link in the description so you can have a look. Thanks for watching

@NeoB-Lac 3 года назад

@@HawaiiDetailing mahalo 🤙🏽

@jakesta11 3 года назад

Where was the leak coming from?

@HawaiiDetailing 3 года назад

When the system is being used and or under pressure it is 100% leak free. Occasionally when you are putting it away and de-pressure the system than there is a small amount of residual water that may drip out. These systems are designed to be leak free under pressure. I choose to always pull the trigger and remove some of the pressure after I am done using the unit as I don't want to store it with pressure in the system. Thanks for watching.

@jakesta11 3 года назад

@@HawaiiDetailing gotcha... Thought I caught you being slick to hide it ;). Yeahhah

@HawaiiDetailing 3 года назад

@@jakesta11 Na. No need to bullcrap you guys. I want to share good stuff and try to help people. I know what’s it like to not have good info when you are trying to be smart with your money. My channel is all about showing the real deal good or bad. I try really hard to only buy good stuff to test because I don’t want to waste my money either. Thanks for watching and taking the time to comment.

@user-qn6yt3zx3w 3 года назад

A 7 minute video about a spray head and we didn’t even get to see the spray pattern or the thing in-use. Otherwise, great video! 👍

@HawaiiDetailing 3 года назад

Thanks. Should have shown it spraying. Check it out in most of my vids I use it. Thanks for watching.

@InsanelyGhostly 2 года назад

Maybe it’s time to get out from the wing of obsessed garage and get your own line. All those products look like Suttner and Kärcher Spraymart 🤔

@HawaiiDetailing 2 года назад

I have a busy life and don’t have time to develop a product line. The tools I have work really well for me. Thanks for watching the channel.

@HelmetVanga 9 месяцев назад

Why did he not tested outside with real water like a real man? all talk theory. Substance over style.

@HawaiiDetailing 6 месяцев назад

I use it on every single video on my channel.

@aliforotan8228 2 года назад

Why you didn't show Pressure of water🤔🤔🤔🤔

@HawaiiDetailing 2 года назад

I use this tool in 90% of my videos. Check a few out. Thanks for watching

@bidenisatraitor7633 2 года назад

Open that garage door and turn it on

@HawaiiDetailing 2 года назад

Thanks for watching. If you want to see it I use it in almost every video on the channel. Guess a demo in this vid would have been a good idea.

@chicbxbecerril6985 3 года назад

How we know if it works you didn’t show us😩

@HawaiiDetailing 3 года назад

Thanks for watching. If you want to see more of it in action I use it in about 80% of my videos.

@VitaminDeeUnderRated 3 года назад

Why does the spraygun cost more than my pressure washer

@HawaiiDetailing 3 года назад

It’s an expensive gun for sure. I choose to start out with an entry level pressure washer with the intention of upgrading to a commercial 1000 dollar unit later. The Karcher has worked so well that I have not needed to replace it. I will replace it soon just because I want a Kranzle. The tools that improve my user experience is where I want to spend my money. Thanks for watching.