Тёмный

BEST Mx5 Miata Coilovers UNDER $1500? 

DriveItRyan
Подписаться 5 тыс.
Просмотров 9 тыс.
50% 1

​‪@GoodwinRacing1‬ Spec Feal Suspension 441 Road Race Coilovers [NA/NB Mazda Mx5 Miata]
Are these the best dual duty Street / Track Coilovers for the NA/NB Mazda Mx5 Miata under $1500? Today, I explain why I chose these coilovers, go over some of the key features, and then install them on my 1995 Mx5 Miata. Full Street and Track impressions to come!
SUBSCRIBE to @DriveItRyan and engage with me as much as possible in the comments to help support the channel!
Connect With Me on Social Media:
Instagram: / ​
Facebook: / driveitryan
Check Out My Team Channel The Slip Angle @The Slip Angle
Instagram: / slipanglemedia
👇 Helpful 🛠 Tools:
🚘 Low Profile Jack: amzn.to/3jfTyVx
🤌 Pinch Weld Jack Pads: amzn.to/2WrUI7v
3️⃣ Ton Locking Safety Jacks: amzn.to/3kq1YsJ
◾️Frame Rail Jack Stand Pads: amzn.to/3sRAYGy
🧰 Tool-Kit I Use Every Day: amzn.to/3DjhD5W
🙌 My Favorite Tool: amzn.to/3mGJt5U
🔩Anti-Seize Used on Bolts: amzn.to/3sRTsXd
Torque Specs:
Front Suspension:
Upper Control Arm Long bolt: 87-101 ft/lbs
Strut Assembly:
Shock Piston Rod Upper Nut: 22-27 ft/lbs
Shock Lower Mounting Bolt: 54-68 ft./lbs.
Upper Shock Tower Mount Nuts: 22-26 ft./lbs.
Lower Control Arm:
camber alignment bolts: 69-83 ft/lbs
lower ball joint bolt (vertical): 54-68 ft/lbs
lower ball joint bolt (horizontal): 54-68 ft/lbs
lower ball joint castellated nut: 45-57 ft/lbs
Rear Suspension:
Upper Control Arm:
Inner bolts: 34-49 ft/lbs
Outer bolt: 34-49 ft/lbs
Lower Control Arm:
camber alignment bolts: 54-70 ft/lbs
outer bolt: 47-54 ft/lbs
strut assembly:
Shock piston rod upper nut: 23-34 ft/lbs
Shock Lower mounting bolt: 54-68 ft/lbs
Upper shock tower mount nuts: 22-26 ft/lbs
Sway Bar:
Sway bar link bolts: 27-39 ft/lbs
clamp mount bolts: 14-20 ft/lbs
Wheels:
Lug Nuts: 65-86 ft/lbs
Equipment I Use:
Camera - Canon Eos R6: amzn.to/3g6CfVM
Lens - RF 24-105 f/4L IS USM: amzn.to/2VaKSmf​
Rode VideoMic Pro: amzn.to/346oSN4​
GoPro: amzn.to/34D8PaA
Neewer GoPro Mount: amzn.to/3p8WuV3
GoPro ND Filter: amzn.to/34zSnIg
Laptop: amzn.to/2JC7rea​
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting so I can continue to provide you with free content each week!

Авто/Мото

Опубликовано:

 

5 окт 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@davidmccaughan2710
@davidmccaughan2710 2 года назад
Great job once again💪. Looking forward to your impressions. Would love to know how they are on our local rough roads as well👍 Currently on the FM Illuminas and springs, but might be ready for some adjustables in the near future.
@DriveItRyan
@DriveItRyan 2 года назад
I’ve been playing with all the settings a lot since the install. I’ve taken it on the track, did a day trip with them, and have been thrashing them around these here local roads 😂 I will update with feedback!
@travdripdrip382
@travdripdrip382 2 года назад
I've been shopping coilovers for past month or so. So many out there, this was a big help man. They look awesome, and just in that brief clip of the track looks like she stayed flat in the corners, not much if any body roll. Thank you for the info bro
@DriveItRyan
@DriveItRyan 2 года назад
I’ll give a better review of these but I’m in love with them so far. I just got an alignment the other day and the car feels amazing. I’d definitely recommend them!
@ChutneyInc.
@ChutneyInc. 2 года назад
Ditto
@NappMotorsports
@NappMotorsports 2 года назад
Really curious as to what you're impressions are with these. It's nice to see a 3rd option for under $1500. I'm personally a fan of the DIY Bilstein setups, I've heard good things about BC's, hopefully these are right up there (or better?) than those 2. Also sick shirt!
@DriveItRyan
@DriveItRyan 2 года назад
I have BC Br’s on my Wrx (says every Subaru owner ever) and these Feal’s ride WAY better. It’s a different chassis though so I don’t want to crap too hard on the BC’s. They have held up well and never gave me any problems, but sometimes it feels like I’m driving a CAT bulldozer 🤣 I haven’t driven a Miata with the diy bilsteins. My red rocket R package had bilsteins but they were old. You already know I love this shirt 🤙
@mauricio4619
@mauricio4619 2 года назад
Thank god you made this, I just ordered mine and wanted to see someone build it. Hopefully the NC model isn't too much different.
@DriveItRyan
@DriveItRyan 2 года назад
I'm not sure how much different they are for the NC. I believe it'll be similar construction. Different valving and spring rates of course. Let me know how you like them!
@missmyvw
@missmyvw Год назад
Any chance of a long term update on these? I’m at that dreaded crossroads of deciding on a coilover setup for another car and these are on my short list.
@zakarywin7645
@zakarywin7645 2 года назад
I have the street spec spring rates for my Feals and they’re so nice! Once I begin to track my miata I plan to revalve the shocks to go with stiffer Swift springs.
@DriveItRyan
@DriveItRyan 2 года назад
Awesome! I like how you can upgrade whenever you want right through Feal. Great company!
@nolahahnshouse3389
@nolahahnshouse3389 2 года назад
I have fortune auto 500's on my miata.. I love them!
@DriveItRyan
@DriveItRyan 2 года назад
I looked at those too! I’ve only heard good things about them.
@nolahahnshouse3389
@nolahahnshouse3389 2 года назад
@@DriveItRyan they are amazing
@pig388
@pig388 Год назад
Hey man your videos are super helpful, I was wondering how you like Feal 441 Road race coilovers how that you've had them for a while? I'm torn between the road race and the regular 441 feal. For reference I daily my Nb1 and would like to do occasional track days.
@cardiffkook92007
@cardiffkook92007 3 месяца назад
I just bought the 441 cuz I drive on the street only but my Miata is highly modded...I'm installing them next week...I'm in the Encinitas area just north of SD
@st8bustin
@st8bustin 8 месяцев назад
Nice have feals on my subi there badass
@aygwm
@aygwm Год назад
When torquing the control arms you need to have the wheel in neutral position in its travel so the bushings don’t bind up. I just use the floor jack to preload the bottom of the spindle
@DriveItRyan
@DriveItRyan Год назад
Thanks for the tip!
@zeusbardanca3897
@zeusbardanca3897 Год назад
What coilovers are beter this or hsd monopro?
@neilobusk
@neilobusk 2 года назад
informative and great video Ryan....even in 144p.... ;) N x
@DriveItRyan
@DriveItRyan 2 года назад
Thanks Neil! What do we have to do to get you some HD content up there??
@neilobusk
@neilobusk 2 года назад
@@DriveItRyan Im just meesin ryan...we can get pretty good net here ryan... N x
@Dude_its_Dan
@Dude_its_Dan Год назад
Thoughts on the Supermiata Tecna Coilovers for NB?
@mattwiser7982
@mattwiser7982 2 года назад
Looks like a great quality coilover. They are monotube and rebuildable too I believe!
@DriveItRyan
@DriveItRyan 2 года назад
Rebuildable and upgradeable! You have to come try these out. I really like them.
@zeusbardanca3897
@zeusbardanca3897 Год назад
What fitment are this weels?
@thomasrudnicki1333
@thomasrudnicki1333 2 года назад
Video I’ve been waiting for (and the impressions) kinda worries me with how low the back is though, on Exocet I have my coils pretty long even with shock spacers.
@DriveItRyan
@DriveItRyan 2 года назад
You’ll have to drive it and see for yourself. I’m real impressed with them so far! The back isn’t too too low anymore. I’m at about 4.5 inch pinch weld height all around.
@bobbyrios2k223
@bobbyrios2k223 2 года назад
Look at Ryan, hes too cool for us with shades on inside. Now that he has feals suspension. 🤣 Coils look good and the car is looking sexy
@DriveItRyan
@DriveItRyan 2 года назад
I’m just glad it doesn’t look like a monster truck anymore! And hey I shot this outside facing the garage door. The sun was glaring! Trust me, I’m not that cool 🤣
@bobbyrios2k223
@bobbyrios2k223 2 года назад
@@DriveItRyan yeah say no to monster truckin! Ohhhh your outside? Well shoot...i didnt realize that, now i see the handle 😂
@manaphyonfire
@manaphyonfire 2 года назад
Your channel is truly a diamond in the rough. You put out quality content and I know it’s going to pay dividends in the long term.
@DriveItRyan
@DriveItRyan 2 года назад
This made my day. Thank you so much. I hope you’re right!
@lobuzz311
@lobuzz311 Год назад
Trackday that allows no helmet and no roll bar in a covertible? What kind of hillbilly track is this? 🤣
@raviolitrail
@raviolitrail 2 года назад
Feals or fortune auto all day.
@trillestchristian
@trillestchristian Год назад
I showed my girlfriend these and she said they look like giant spark plugs
@DriveItRyan
@DriveItRyan Год назад
🤣 Hahaha I can see it!
@shimmytube777
@shimmytube777 2 года назад
Use a coil depress tool for removal.
@DriveItRyan
@DriveItRyan 2 года назад
I need to get one of those.
@merlyn2121
@merlyn2121 2 года назад
11:20 a mosquito is having dinner on his neck. 🦟
@alberth2382
@alberth2382 10 месяцев назад
I’m still stuck on these or the meisterr zetacrd🥹
@zanevy3645
@zanevy3645 9 месяцев назад
Same
Далее
$300 vs $2000 Coilovers
20:54
Просмотров 3,6 млн
How to Install Coilovers | NA Miata
18:03
Просмотров 36 тыс.
How I  made my Mazda MX-5 a sub 5 sec 0-60mph monster!
14:49
Why You Might NOT Want Coilovers (FM Live)
27:10
Просмотров 39 тыс.
If You're Looking For New Coilovers, Watch THIS!
8:31
Просмотров 242 тыс.
How to Choose Your Suspension (FM Live)
27:06
Просмотров 25 тыс.
5 Things Every Miata Owner Should Do
10:58
Просмотров 288 тыс.
Are Aftermarket Sway Bars Worth It?
11:22
Просмотров 2,3 млн
Сюрприз после ремонта авто
0:13