Best Off-road Air Compressor MODS.

Подписаться 366 тыс.

Просмотров 246 тыс.

50% 1

Today we are going to modify our Maxi trac Off-road air compressor! These NAPA Maxi trac compressors are fast and cheap but they really need help. With a little bit of elbow grease and some cheap parts from Harbor Freight I think we can make giant improvements. By the way, I have found that a lot of these same ideas could be used on the Smitty Built 2781 so if you have another type of tire filler/on board air compressor, these ideas might be useful!
If you liked this one and you want to see a part two, let me know in the comments 👍. I definitely plan on continuing to modify this compressor but if it's not a topic you are interested in then I won't turn it into a video.
Thanks for watching!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DiRTBAG MAFIA Facebook Group
groups/34277...
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#overland #offroad #4x4

Авто/Мото

Опубликовано:

11 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 635

@moeandco. 2 года назад

Definitely need a second episode. I was super impressed with my compressor in stock configuration, but now I’m going to have to step up my game.

@austin.stanfield 2 года назад

I use vaccuum grease for these types of applications, the low vapor pressure keeps it from volatalizing when your pump gets hot and gunking up system

@DirtLifestyle 2 года назад

Great suggestion thank you!

@harrywalker968 2 года назад

@@DirtLifestyle arb are sht, expensive crap... i have one of those comps, here in aus, called thumper.black.. 300lt. its hooked up to my f250, s/duty, air bags, & 2 fire extinguishers. with a cut off valve, say 120-180.o/c. pumps up my 35,s in 5 mins. i still think the power tank is best. will get one soon. trail recon, had 2 arb,s junk..[ i anodize sht blue, & it sells real fast.]. 62 f100 4x4,352 fe.. 75 cut swb highboy 4w disc,5 sp.. 82 bronc sas.. 02 s/duty, 4.2tdi, brazilian. &, a 73 chall. r/t. oh,,& 2 cats.. you want a laugh,,watch inskip beach 4x4.. might of said before...im 63,,wait till you......????????..............forget things....................

@harrywalker968 2 года назад

@@DirtLifestyle those CE, air switches, i been thru 5 of them, i switched them from the comp. to the air tank. 1 still blew, lasted 4 mins. the air line hole upgrade is good idea. im still using the airbag lines to the outlet. 6mm o/d. great vid.. i allways think of an 8cfm , 240 v, comp, hooked to an inverter. or,,110, to you..

@harrywalker968 2 года назад

@@DirtLifestyle do a vid on hooking it to 2. 5 gal tanks. oh,forgot,, you only have a toyota,,no room...nice paint job..lol...ausie sarcasm..ish..

@frankeck5493 2 года назад

So we I've watched this 3 times now. Once by myself and twice with the boys. You blown their minds removing the computer board and operating it with the switch and solenoid. Part 2 should definitely include a white board of the wiring. Still trying to get the younger one to equivocate a relay to a solenoid.

@EricBuenoo 2 года назад

Love these videos! It’s great to see alternative DIY videos. Not everyone has $500+ to spend on an ARB.

@syndicateindustries2745 2 года назад

I did something similar with a smaller hf compressor and was planning on doing similar mods on this exact one. Love this type of versatility.

@Jason-gt6eb 2 года назад

Great video! I appreciate your desire to tweak and improve EVERYTHING, not just stick to one area of focus

@Davidshomeworkshop 2 года назад

Between this and the on board air in the disco, I have a plan for my own WK2 air system. Thanks for the ideas, knowledge, and motivation. You inspire all of us.

@joerivas9847 2 года назад

FINALLY!!! Someone who knows to thread teflon tape on a fitting backwards!!!!!! That would drive my brother crazy when he worked in the geothermal field.

@mattb.2359 2 года назад

I did some of those things to mine when I got mine. Went up to 1/4” npt from the 1/8” that was on there originally. Secondly added a pressure regulator. Reason is the compressor can output 150, while normal air tanks are rated for 100. So regulator is set below 100 for tank safety. Ditched the spring clamps for the battery connection in favor of adding 2 gauge ran up to the front, through a 200 amp continuous load relay, which is switched through my SPod. It works, and fills itself and my tank from dead flat to 100psi in 1 minute. Single ARB used to take 3, plus complicated wiring.

@MattE_NB 2 года назад

When I was researching rebuilding my "Titan" branded compressor (physically identical to the larger smittybilt unit), smittybilt owners were recommending SuperLube with PTFE for the cylinder.

@scottyyy3608 2 года назад

Great mod, you won't look back, I did this about 1 year ago increase fitting to 1/4 + update hoses and cable. Mine is permanently mounted behind back seats with a 12v boat blower blowing across it to keep it running cool. Then made my own twin tyre inflare deflation kit and it's quicker than a ARB DUEL 😀

@mandbhomestead 2 года назад

Great job on the upgrades, thanks for the ideas. Let’s see part 2 for sure. Have fun camping. Thanks for sharing and stay safe. Ken

@feltusfeicit 2 года назад

I will use PM600 "military grease", I've been finding it pretty useful on the truck, as it has good temperature characteristics as a dynamic lubricant, and is also designated as a liquid o-ring.

@dustinbaird1008 Год назад

Yes PLEASE do a second episode. I bought this compressor and have loved it but I could tell it needed a little help to be solid. I can't wait to follow your video step by step this weekend. Thank you for all the great tutorials and project ideas.

@jaredgreen502 2 года назад

Very helpful. Never realized could do mods like this & you plan it so well. Also great job explaining why you're modding

@kevinvainio 2 года назад

Just got myself the exact same one and planning on making upgrades to it, definitely didn't think of those. Thanks! Awesome info.

@teamtrimm4461 2 года назад

Love it! The fact that you had to simplify the device to make it more reliable says a lot about where we are in this world today. I swear if I had the capital I would start a company that did exactly this. Imagine the possibilities!

@silentbravo 2 года назад

It's about cost. That PCB and components cost a few dollars to make. The solenoid he added was probably $10-30, and the pressure switch was probably around the same cost. So adding $20-40 or more in build cost to sell these at only $150 really dents the profits. You see how much work he had to do to it to make it a lot more robust, yet the build quality for the remaining parts can still be questionable.

@piasprojects 2 года назад

This build/modification is awesome! I definitely like the idea of improving a product that will extend its life. Definitely a great video Nate!!

@Thatbrownguy454 2 года назад

This was really cool. As always you put out content that makes me think about my setup and how I can make things more functional. Can’t wait for part 2!!

@TrevorDyck 2 года назад

This was cool, Nate. Would definitely love to see more of this kind of tinkering/tweaking/modding content.

@jimlofts5433 Год назад

Anderson plugs - so the cable could also be used as batt start leads etc

@darrelsmith4549 2 года назад

I love it brother ‼️💪 Your the man ‼️ So smart 💪 Please do a part 2 on THIS... I can't wait to see the final product bro 💪‼️

@daniellavoie8379 2 года назад

Nice project. If you added power connectors like the ones on winches, the cables could be used as booster cables and to power the compressor. This way perhaps the compressor could fit in an ammo can. Good job!

@chrlsraines 2 года назад

Yes! Like the I believe their called “Anderson Plugs” used on Tow Trucks for their booster cables. Tow trucks never have to pop the hood they just plug in the cables… and those plugs I know for a fact can be ordered on Amazon.

@abpsd73 2 года назад

I had the same idea, having the connectors also allows the cables and compressor to be stored separately and makes untangling cables easier.

@chrlsraines 2 года назад

I’ve almost done away w/ my booster cables, got one of those small (but powerful) boost packs, ABSOLUTELY LOVE THAT THING!! I tested it out of box by totally disconnecting my battery and jumping my truck straight off the pack several times… works great, & have used it several times! Keep my cables as a contingency just incase. But I plan on getting the plugs and wiring to install one on both the front & back of my truck for easy access, and they can also be used for hooking up accessories when needed.

@MinimaDomum 2 года назад

I have them on the front and rear of my rig (anderson connectors) i use them for my winch, jumper cables, and compressor, very handy

@woodenfly4quids168 2 года назад

@@MinimaDomum I have the same set-up, but only at the rear. The inflation hose reaches all tyres on the Cruzer, and the 4 tyres on the caravan (but not the spare - I can check that when it's fitted.) I have an air line ✈ fitting on the compressor, but I'm really impressed with that simple idea for a manifold. That's next. 🙃

@bwofficial1776 2 года назад

I'd love to see some more done with this. Porting the heads, fitting it into the can, anything.

@dwaynehoffmann8538 2 года назад

I love the Compressor mods! I have a '79 JC-7 with an AC compressor conversion and an '07 JK with twin ARBs. On the KJ I connected 3 Ts together. This give me an input and 2 outputs on the driver side and 2 outputs on the passenger side (This is under the back seat). My input hose is long enough to reach my ARBs, and my outlets are long enough to reach both sides of the seat. I also have cut a 25' air hose into 6, 50" pieces (with ends) These will Velcro together and lay nicely under the back seat. It takes 2 pieces to reach the front, and one to reach the rear. I've also put a ball valve and a pressure gauge on my input line so that when I close the valve it show the pressure in the tires. I can inflate/deflate all 4 of my tires at once, or I can connect the pieces and make a 25 foot hose is someone else need air. :) Keep up the good work!

@garywilliams7484 2 года назад

Definitely a cool video. 100% want to see more videos about your compressor and how you adapt it to a tank.

@adventureeverything3125 2 года назад

I was just trying to piece together what I’m needing for this. Plus I have Multiple rigs and can’t build a compressor in each one. So this is awesome for a good compressor set up to move from vehicle to vehicle for different trips. Also go in my construction truck to blow myself off before heading home to work.

@andylewandowski4808 2 года назад

Great video. I bought one a few months back and thought it needed a few upgrades too. These will definitely help me out. I was also thinking an Anderson connector on the end of the new power cables. Then add an Anderson lead to the truck and one to the short ‘left over’ end of the cables with the clamps. Better/easier connection to your rig and still the option to “clamp on” to someone else’s battery/rig.

@edukano85 2 года назад

That is what I've done with mine. It seats in the back of my Montero permanently connected, but I can easily take it out and use the clamps. 3 Andersen plugs and some wire is what you need (careful with the gauge and long distance)

@bobjackson7516 2 года назад

So awesome. Yea dude, MORE FAB!!! This would play well into that video where you made the manifold you tucked into the front bumper that was for suspension on the Disco (if I remember correctly). So yea man, PLEASE more of this! The fact you're taking PC boards and replacing them with simple switches is so badass. Gotta say, I've been disappointed with the "heros" I've chosen over the past 50 years, but you're the best one in the past couple decades. Rock on man. I hope to shake your hand some day.

@Overlanding4Fun 2 года назад

Thank you for the video. I have one sitting on the bench thinking about extending power to the rear of my Bronco so I did not have to lift the hood each time I wanted to use the compressor. You are correct, the power leads are inadequate for a 90A load.

@CruisingTheLand Год назад

Check out airing up 4 tires in 4 minutes: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gbJb5bSjtoY.html

@tiny_the_200 2 года назад

Great job on the editing of the Timelapse portion 🤙🏼 I have the MorrFlate model. Always good to see what can be improved if that one offers similar build quality.

@elcukro 2 года назад

Great video Nate. This mods format is great and I think it has great potential for many other areas (how to do coilovers on the cheap, hydraulic brake mods, hydraulic steering mods etc.)

@the_nothing 2 года назад

Outstanding! I mentioned on IG that I have been thinking of making many of the same mods to my Napa compressor. Picked it up early 2021 and have been happy but knew it was capable of more. I was planning on the 200amp relay and ditching the electronics because I want to be able to mount this are the rear of my 4Runner along with a tank since there's no long a spare tire back there. I knew the electronics were not going to withstand exposure. I would have recommended not using the ammo can, at least not for mounting. These things get hot and need the air ventilation to keep cool. It's fine for transport and storage, but not for use, at least not without modding the ammo can (vents, maybe even a couple 120mm fans.... hmmm....) Thanks for the video, pretty much confirmed that what I was thinking about will be suitable. Plus you gave me a couple other ideas (hard line, etc)

@jamesmcgarry8660 2 года назад

If you want to add a "homemade tank" you could get whatever length of 4" copper tube and silver solder caps on with any connection size you want. It would help cool the air even more, especially it there is air flow. It isn't much storage but for this application more than enough. Having been in the compressed air industry for nearly 40 years, this is a great product for the price. Excellent mods done with the 1/8" to 1/4" size upgrade being understated in it's value. That will also help reduce heat load.

@daviswood8436 2 года назад

Glad to see you used blue monster teflon tape! In my personal opinion it’s the best you can get for most applications.

@xjinit 2 года назад

Since you're using a manifold that stays under pressure, I'd suggest installing a check valve into the supply line as the big compressors have. This will remove the constant pressure on the pistons at startup.

@DonziGT230 2 года назад

The startup pressure is less of an issue with this type of motor, and with such a short output pipe the check valve will do very little for startup pressure anyway.

@xjinit 2 года назад

@@DonziGT230 there is usually a bleeder valve to clear the compressed air in the line that accompanies that check valve.

@DonziGT230 2 года назад

@@xjinit Yes, it's part of the pressure switch used on 'standard' compressors, and it'll do very little for this setup.

@xjinit 2 года назад

@@DonziGT230 can you elaborate?

@DonziGT230 2 года назад

@@xjinit The pipe is very short/small volume and this compressor moves a large volume of air so it'll pressurize very quickly therefore be of very little benefit. The pipe on a home compressor is typically much longer and the compressors are lower volume so it'll take several strokes to pressurize the pipe. Also, this type of motor isn't effected by startup torque like the motors used in home compressors which have a very hard time with startup. One of those without the pressure release often won't be able to get up to speed, it'll try 'till it burns up unless it has an overload breaker to protect it. I don't know of any 12v compressor that has a pressure relief and they all do fine, even those without a check valve.

@aaronminer6024 2 года назад

Great work on this! I have heard of a bunch of these burning out! Especially running more than one vehicle. I run a more flate to do all 4 tires at once and that keeps the heat down. They also have the same compressor at Summit OffRoad. I did a video on it a year or so ago.

@JMCKAY351 2 года назад

Yes definitely keen to see more mods for these compressors please.

@chrlsraines 2 года назад

Yes a Part 2 of this mod would be appreciated! I LOVE your Fab vids! Those interest me the MOST… I’m not as skilled as you, especially since I don’t have the shop space or tools that you have so that limits me. But I can do some intermediate level fab work.

@golfmike304 Год назад

Napa was continually out of stock until I noticed a different Napa store that had a link to have it shipped to this store. So I did and picked it up a day later. So glad I found out that little option. So when on their site scroll to different stores and see if there’s the option to have it delivered to that store.

@gavincregan7892 2 года назад

Please do a part two. Some of your truck videos are exceeding my skills and budget. This is within my abilities (I could even repair the circuit on board but eliminating it is a reasonable plan).

@TonyAlvestad 2 года назад

Awesome video with good info. I love tinkering and modding things like compressors so this is right up my alley

@jeffwuzhere 2 года назад

Toss a pressure regulator and gauge in front of your air hose quick connect. This allows you to set your target pressure on the regulator, connect the hose to your tire and just let it run until the pressure switch cuts power. No need to babysit it or keep checking pressures as you go.

@Omoba464 2 месяца назад

Hello I can't find one

@TyGuyPS5 2 года назад

Nice video man. Just the content us regular diy’ers want!

@bradstevens993 2 года назад

Great Video! I would've loved to see a before and after test for temperatures and CFM output.

@AntonioClaudioMichael Год назад

Love the ammo can idea

@jasonjohnson4214 2 года назад

Really like the upgrades you made to this compressor! I’ve been considering buying a new compressor since I’ve had my little Viar for over 4 years now.

@frogswurld 2 года назад

My Viair has been getting weak too. Been a great little system but doesn't recover like it used too.

@X1019703 8 месяцев назад

Yes please part 2. Comparison in STOCK VS UPGRADE. 1.)Time for pumping up 4 tyres. 2.)Temperatures of the compressor during operation both cold and hot day on the field. 3.)Wear and Tear report (3-6-9-12 months). Your awesome. Your practical and making small adjustment to affordable products and enhancing it to last longer and functional and a lot cheaper to buy and build and probably a lot easier to fix and simple especially with taking out the circuit. Keep up the great work and keep it coming.

@patrickharo879 2 года назад

Waiting for part 2 and your review on how the changes worked!

@sephtonkotze102 2 года назад

Did the same to mine. Also aded tank and remote control. It started to leak back through the head gasket and ruened them. Made new ones from o ring material and added a one way valve to stop it from happening again.

@chrisridebike8 2 года назад

Hell yeah we wanna see more! Nice work.

@natejonas1107ify 2 года назад

Waiting on part two. Still learning mainly electrical so itd be nice for an update and maybe a quick walkthrough of how you did the things you did. RU-vid is my school now.

@Kingston100LC 2 года назад

Glad to see you up and well after round 2 of covid!

@StarHunter28 Год назад

This is awesome, I'd like to have something like that to use for airbags, train horns, and onboard air.

@DangerRanger89 2 года назад

Nice upgrades! I would consider adding a computer fan sized accordingly, to help cool that compressor in the ammo can, if you run it inside the can. Love the videos, keep it up, you keep me motivated

@Dodsonmonty 2 года назад

I was thinking the same. But he did say it was for storage.

@OldBlue62 2 года назад

I like what you’re doing with that compressor. Looking forward to what else you do with it!

@ColeMarkusen 2 года назад

Definitely in for part 2. Lots of potential here

@travismatz8268 2 года назад

Not going to lie I went to napa the day after I watched this video the first time and looked around and found one of these sitting in the corner covered in dust and I bought it now I'm working on modifying mine similar to yours.

@AntonioClaudioMichael Год назад

That Wrap or paint job on that Taco is dope

@InMused Год назад

Awesome additions. I put Anderson plugs on my compressors to eliminate the alligator clips

@brandonkaufman9307 2 года назад

I would love to see a part 2 on this and I would also like to see a more detailed explanation of the wiring on the dual compressor set up on the discovery. Maybe even a comparison of the 2 systems I have a Viair OBA setup on my truck that is great but I would love to get a faster compressor

@dallasbrown3446 2 года назад

Definitely need a part 2!

@mikejensen-fogt4662 2 года назад

Awesome vid nate! Years ago i modded a smittybilt compressor similar to what you have done here. But i added a small 3" round x 6" long tank and a pressure gauge. I also added dual air chucks so if a buddy needs to fill tires, ive got a spare air line he can use.

@jonaathansimons7938 2 года назад

Old fire extinguishers work well for tanks...

@fluffyeggs 2 года назад

I have the single cylinder version of this. Had to replace the relay, reseal all connections, and replace one of the exhaust port orings. Pretty sure the piston ring is teflon so I lubed it with triflow teflon grease. - 120 amp circuit breaker may be a good idea. Will also function as a switch so you don't have sparks when hooking up the battery clamps. - There are tons of these on alibaba/aliexpress. Shipping will be slower but the price is much lower.

@codychilders8307 2 года назад

Part two sir We love this small tinkering stuff

@robwilliams287 2 года назад

cool video and good timing for me I was just looking at some of these little compressors the other day thinking about getting one soon.

@williesweetjr8713 Год назад

One of if not the best compressor mod videos on the net.

@brandonanderson6429 2 года назад

Part 2 for sure. I want to have a tank on mine so I can use it for air horns... keep up the good work sir.

@JacobShepherdEngineer 2 года назад

I like that you mix in these non vehicle mods and builds with the rest of the content.

@Flitzer514 2 года назад

Very interesting, I have no idea what I would use that for, but I would like to see more videos about it.

@jcdixon01 2 года назад

What a fun little project...hell yeah, I'd like to see a part two, three, and so on.

@zaphods2ndhead193 2 года назад

I have been wanting to get that compressor for a little while now. I was worried about the longevity. The mods you made are completely doable.

@dennisfreebairn8754 2 года назад

Brilliant work. A comparison before and after would be awesome to see too. Great work nate. I have the same which I got from eBay.

@VGrillone 2 года назад

Excellent video. Part 2, add the tank!

@Scotty777 2 года назад

Awesome! I have one of these NIB right now ready for some Mods.

@codylongmire2847 2 года назад

Anderson connector for this would be a good option too. Amazon sells jumper cables with Anderson connectors; so easy to keep mobile if you throw it in the truck or off road trailer.

@RichardBauer_ 2 года назад

As always, great vids and these little cheap mods are some of my favourites!

@om603denis 2 года назад

THANK YOU! I'll probably build the same thing! But I have a problem with moisture freezing in the lines when airing up in the winter.

@sgt_oj 2 года назад

I'd love to see a second episode, for sure! Once you make your ultimate, decked out version of this compressor, and if you can find more of these, might be an awesome thing for a giveaway? 🤔

@frankeck5493 2 года назад

I bought one, and a week later bought another because it worked so well. Went back 2 weeks later to get one for my sister and they were out of stock, and also haven't been able to get another.

@straylineoutdoors5259 2 года назад

Never use petroleum-based products- they degrade the seals. Silicone grease is the way to go as others have noted. Mod looks great!

@e.c.8668 2 года назад

use comprssor lube.

@jethro9341 2 года назад

If petroleum products degrade seals, we wouldn't put petrolatum, or hydraulic fluid, or various oils, or fuel, on every single rubber packing, seal, gasket and o-ring on a helicopter. In 40 years as a professional mechanic, ranging from heavy equipment to countless aircraft, I can count on one hand the times where a non-petroleum based lubricant is called for by a manufacturer or technical specifications.

@russellv6234 2 года назад

@@jethro9341 Depends on what the seal is made out of and since there's no money in using seals that resist oil in a part that has no oil, companies dont do it.

@Eric2300jeep 2 года назад

I respectfully disagree. I used to be an industrial air compressor mechanic. I've worked on just about every style of compressor out there and units up to 150HP that were the size of pickup trucks. We used petroleum based lubricants on almost all seals, unless otherwise noted on the seal manufacturer's recommendations, which was practically never.

@jethro9341 2 года назад

@@russellv6234 Your standard run of the mill seals, packings, o-rings, are fine with petroleum based products. The extra cost to a manufacturer would be a specialty seal that doesn't jive with petroleum products.

@rickwatson1000 2 года назад

Great information and upgrades , Thank you

@joshg8458 2 года назад

I got mine a few months ago. Ordered it online and picked it up from my local store a few days later.

@rubicon4wheeler 2 года назад

Nate, your videos keep getting better! I have the MORRflate version of this compressor and I'm really impressed with it. Your mods are terrific - you ought to make your own bolt-on manifold setup to sell to everyone who has this compressor so you can retire as a millionaire! Although the ammo can idea is great, the problem is that you need some way to radiate all the heat the compressor creates. Perhaps wiring up a 12v fan to suck air in one side of the ammo can, blow it across the heads, and vent it out the opposite side? That would keep hands from getting burnt and would protect all the fittings and wiring from getting banged around in the truck. I'll be your first customer. :)

@clerissonmesquita Год назад

Great job, appreciate it, keep it up the amazing work.

@lewisdunn8169 2 года назад

Great video..I have one mounted under the hood of my 4r. Will definitely be making those mods.

@nevadabadger7925 2 года назад

Greetings from Reno, Nevada. Headed to Amazon. I overland in a 2014 E-250.

@jonringard5080 2 года назад

I’m in Fernley and haven’t been able to find one of these compressors 🙄 Built 2008 JKU 😎

@AntonioClaudioMichael Год назад

Custom bed on that Taco is pretty awesome also

@ascentoffroad 2 года назад

Definitely would like to see the part 2!

@norcoredneck 2 года назад

Awesome. Want to see it in the ammo can.

@DanTaff41 2 года назад

I'm literally copying this, absolutely brilliant

@madcratebuilder 2 года назад

I like it, great job. I think I would use a Anderson connector for the jumper cables to compressor. I think I would use Synthetic grease I use on Poly bushings.

@Johntasticful 2 года назад

Cool video. Heck of an engineer!

@snicklefritzd3612 2 года назад

Part 2 please. Thanks Nate.

@matthewgoins87 2 года назад

Great video bro!! I love seeing stuff like this 👍👍

@rovereddy2431 2 года назад

Loving the disco in the ba k mate and excellent video on the diy

@adamseaman7306 2 года назад

Love all the content Nate. Cheers brother

@utilityart 2 года назад

I’d love to see a full on board air install with it and a small tank. I’ve been collecting parts for and waiting for my baby Viair to die to do a permanent install. But kind of settling on the smittybilt do to availability and space constraints.