Best Ridge Cap Install  

This looks stupid.

Shut up

It was at that moment he knew he f***** up😂

@@oscarespinoza1368 that cut wasn't so hot either. Hahaha

Roofing directions? Where? Metal panels don’t come with directions.

Classic😂😂

That's why british say silicone instead

Mate used to call it silly cunt sealant​@@haydnbrewer7426

@@haydnbrewer7426losers it’s more fun to talk about your caulk all day😂

Decorators caulk ​@@haydnbrewer7426

Ну почему же просто дырявит? Он заклепкой аэратор присобачил к ответной части в месте, где протечка не страшна, так как под ней капля на скат кровли упадет. А герметик для герметизации стыка.

@@Gothikpanda Честно говоря, я не понял, зачем тут в принципе герметик)))

@@СергейСкворцов-т9и Снег имеет свойство таять прямо на кровле.

@@Gothikpanda При этом вода имеет свойство течь вниз по уклону даже под снегом (что, собсно гря, и является причиной схода снега с крыш и появления снегоупоров как элемента). А герметик часто при разборке оказывается приклеен только к одной стороне, а со второй образует замечательный капилляр, по которому вода под нахлёст уходит куда дальше, чем без него. Лечится только хорошими герметиками, вроде соудаловского FC11 и монтажом без последушего сдвига, практически сразу в место. Но здесь все эти рассуждения ни о чём, ибо конёк вентилируемый и под ним ещё пять см прорезь, пусть и с лабиринтом)))

@@СергейСкворцов-т9и как будет таять снег зависит от многих условий. Например ночью температура воздуха -10, температура на границе снега и кровли -7. Утром потеплело и вышло Солнце греть землю. Температура воздуха стала +5 градусов, температура на границе снега и кровли -2 градуса. При таких условиях снег сверху будет таять и насыщать влагой холодный снег. Попутно влага с влажного снега полезет во все щели.

Got it coach!

​@briantownsend5124😅😅😅😅

Yes boss 😂😂😂😂😂

Better to vacuum instead of spreading around rust out gutter

For sure its more work if you fck something up 🤣

@@Demoz775 yeah that's a hard lesson to learn on those metal roofs. Last thing you wanna do is put a screw hole in the wrong spot. Your work looks like you're far beyond those kind of issues occurring. However, it's always in the back of the mind I'm sure. Your work looks fantastic.

100% I always use small gauge tek screws with neo washers

This is standing seam the idea is no exposed fasteners. The ridge has a cleat the the metal hooks into. So you probably put on corrugated metal roof

Yessir, we ran screws in the field than rivets on the over laps!! Better end product!!

How does that save any time or effort? I was hoping to find this comment lol. I just immediately thought to myself "well that's pretty useless"

@@marcotte6608 have you spent any time popping rivets manually? It can be quite a forearm workout.

And the damn jaws open so wide. I'd take a battery tool just for THAT lol

Does it retrieve the leftover rivet needles or do they fall out when you hold the gun down like in the video?

@@rokbrglez3134 yes, the black plastic container on the back of the tool holds them.

I love this comment 😂

There you are 😂 I knew this comment was going to be here 😂

Noice

Your comment was screwed

not only was he fast.... but he was fasten effective I'll see myself out

same building during a hurricane would rooftop it

там вообще герметик не нужен, это конек😂😂😂

​@@Screponosecпосмотри какая щель между скатами под этим коньком

Я тоже об этом подумал,что пока он устанавливал герметик хз как размазался и остались дыры

@@Screponosec Первая же мысль))))

Им надо рубить бабки, а как это будет работать, их не колышит. Все строят по технологии "как у соседа".

Those are lapped way over the main roofing though, so not a possible water entry point

Yes sir that is correct lol it looks great way cool

😂😂😂😂 lo mismo digo son todos unos expertos en el trabajo ajenos pero te aseguro que no saben ni clavar un clavo todos esos que crítica 😅

I'm no expert but I would put more caulk to make sure no water hmgets inside and more fasteners t0 deliver a well done work ! And sleep peaceful ✌🏻

So many different ways to go about things. I worked for a metal roofing company, Ive seen things I never knew and things I thought they should of done. If it keeps your roof from leaking is all that matters

Looks good but pissing in the wind useless when you don't open up the sheeting the proper 2" on each side for the attic to vent That's why you do it. Pretty up there matters zero. Functionality and integrity is what comes back to benefit the homeowner for years to come. But here this is going to cost the Homeowner dearly. If you don't know how and why then my fellow you tuber you need to learn the importance of proper venting if attic space and insulation knowing how a house breathes and benefits greatly when done right. Done half assed Big Big trouble for the home and money wasted forever every year and in 20 years something catasropis failure

@@JonnyG0969 except for the fact that this is on a pole barn with end and soffit vents. So your point is quite moot.

@@christopherhansolo9069 then why waste the money on a ridge vent mootman

@@christopherhansolo9069 alsowgat I am saying is if installing a ridge vent cur back the sheeting like your supposed to. Dah

Wrong short lmao

Bruh dead internet hitting hard today

Ur a ding dong

Man you're crazy. If you've ever had to put hundreds of rivots in a day, you'll know this things beats a hand pump one 10 fold. I don't know what the pilot pop thing is your talking about is though so maybe

Came here to say, that tool is totally worth it. Must not do enough sheet metal work

Don't have to pick up mandrills either and hold rivet while upside down... Pretty nice but doesn't get into hard to reach places because it's bulky.

Glad somebody said it. Lol

Da stimmt, immer nur ein Ende Nieten!👍👍👍

А от чего они отлететь могут? Не сгниют же. Разве что сильный ветер каким-то образом снесет

@@Leeaks от ветра, от перепада температур, не знаю, может мне одному так повезло, но переделал всё....

Если брать дешевые да отлетают.

​@@Leeaksкак раз то и сгниют. Очень плотно связан с грузовой техникой, могу по опыту сказать, что если алюминиевые заклёпки установлены в железо, то по по электрохимической активности металла первым коррозия съест алюминий. Использование железных клепок тоже не спасет, они сгниют вместе со всем металлом и вылетят

There are specific shoes made for the cleaning industry that have snipes like snow tires in the rubber soles. Wet or dry they grip. Available with safety toes too.

Yep, he's mentioned cougar oaws in another video.

adidas superstars will stick even when it's drizzling out :)

Kean hikers! Stuck me to roofs i should never have been on. Feet are to wider for merrils

Chuck Taylor's

Not all buildings are vented only at the roof. If it's vented in other places, then it won't need as much ventilation in the roof

@@coreybarnwell2621I was going to question your response and say wtf? Other ventilation somehow affects the roofs venting??? Then I remembered what these guys build. Residential roofer here 😂

Wind driven rain,is a wide gap con. I go 3" 😂

@@johnrambo1227 it's 2" on each side of the ridge. I take it your a roofer who isn't that educated. Not in school but time on the job. 20 plus years and you will start to know things. If you don't understand that 4" by the length of the ridge vent gives you X amount of square feet of exhaust vent. Then you need to add up all the bullshit pinholes in the soffit vents. You can only exhaust what you can bring in. The temperature of an attic space is supposed to be as close to the current outside temperature. So do the math genius. You most likely still do not understand the importance behind this. You will have no ice build up on roofs in cold climates. And approximately 50 to 60 dollars a month off of the electric bill in Southern climates during the cooling times

@@coreybarnwell2621 90% of roofs are not vented properly causing wasted electricity for cooling Ang the same for heating but most of the problem is with leaks caused by poor ventilation that traps heat in the attic that melts snow on roofs then it turns to ice on the eve then creates a ICE DAM. WHICH WILL BACK UP WATER UNDER SHINGLES UNDER STANDING SEEM UNDER ANY ROOF COVERING THERE IS PERIOD. UNLESS YOU PUT A POOL LINER OR SCHLUTER SHOWER / FLOOR TILE SYSTEM. AS ROOF COVERING, that's a fact jack 💯%

😅да ты что? Прям мистика 😂

Мечта для тех у кого нет Я предпочитаю Dewalt

@@PastorChief812 .Это как и с автомобилями,кому то нравятся немцы,кому то японцы,на вкус и цвет-товарища нет!

@@PastorChief812dw сосёт тем более в России

Похоже без этих инструментов вы просто зависните не зная что делать господа

Spotted in the wild 😛 like that

Not Kyle here, ABC Roofing Supply? Why need to download details, a Mexican will install it,,

Kyle gets his metal from metal sales. The profile of the panels is image II

Well I'm French, here we have bacacier and arcelor metal has suppliers, they have the "clipeo" system and the "mauka line" system, witch are all explain in catalogue and details BUT they don't provide details of the ridge cap like Kyle. It's ridge cap with screws and I don't like it ! Why make a "joint debout" roof system if you put screws on cap ? I will check ABC roofing thks .

Also curious of the supplier and product, @rrbuildings

I’m just here to read all the “expert” opinions on what he is doing wrong.

You'reright..as a young plumber one time. I was so proud to pass inspection and the inspector brought me back with....son..that's the minimum.

Clueless u are…

И сказать то нечего.

And it will last a lifetime+ unlike shingles

Причем если правильно это сделал тоже не течет ничего

@@xaxaphone Хз как вы там правильно все собрались делать. Снега навалит 30см на кровлю. В месте аэратора он будет сильнее таять, так как теплопотери через него в основном выходят. Это тепло растопит лед у конька, а вокруг все еще снег. Поэтому талая вода во все щели побежит, и под конек в месте стыка тоже.

​@@Gothikpandaты вылез из мамкиной юбки и сразу научился писать? А опыта наблюдений и логики ещё не собрал? Поживи пяток годков, авось вразумишься. И забудь на это время хоть что-то писать.

Да и снимать,если приспичит комуникацию провести ,легко.

Give your balls a tug.

Same thing with clean boots!! F those guys

Maybe he just takes care of his stuff, especially when it costs hundreds of dollars to buy.

Here we go always one clown looking to hate..wudnt trust u

​@@sethbrandenburg941you don't know what the hell you're talking about

Or hands!