BEST SATA Powered ARGB PWM 8 Port Fan Hub ID Cooling HA-02

Подписаться 118 тыс.

Просмотров 38 тыс.

50% 1

#IDCooling #RGBHub #FanHub #PCtips #HA-02
BEST SATA powered ARGB PWM 8 Port fan hub ID Cooling HA-02
Available from affiliate links
Amazon Local: amzn.to/3yTk53k
Ebay UK: ebay.us/G85Jb7
Ebay US: ebay.us/W2Dx4V
Ebay CA: ebay.us/N8wZCm
Ebay AUS: ebay.us/YlN4Hz
This makes for a really clean and simple control setup and is less than £15! BARGAIN!
ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter
About this item
【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans.
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.
【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans.
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place.
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy.
Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesun...
Discount code: MIKESUNBOXING 7.5% Off
Computers & Gaming Playlist: • Computers And Gaming
Unboxing Playlist: • Unboxing
Budget PC Cooling Playlist: • Budget PC Cooling
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
RU-vid membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshirt.co.uk/mikesu...
North Americas: shop.spreadshirt.com/mikesunb...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com/shop/mikesunbo...
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus.energy/rose-gro...
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.mention-me.com/m/ol...
Pay For Items Monthly: www.shopabunda.com/?ref=mikes...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlink.com/589.html
www.premiumcdkeys.com/mikesun... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.com/?rfsn=261416...
Get in touch with us:
Email mike@mikesunboxing.com
RU-vid / mikesunboxing
Website www.mikesunboxing.com
Discord: / discord

Опубликовано:

12 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 191

@mikesunboxing Год назад

Available from affiliate links Amazon Local: amzn.to/3yTk53k Ebay UK: ebay.us/G85Jb7 Ebay US: ebay.us/W2Dx4V Ebay CA: ebay.us/N8wZCm Ebay AUS: ebay.us/YlN4Hz

@Tommyg884 Месяц назад

You just earned a new loyal subscriber for being no bs and straightforward! Cheers 👍

@mikesunboxing Месяц назад

Welcome aboard! thanks for the sub

@jamesmiscellaneous 2 года назад

14:00 ... it's these moments and small bits of information that go a LONG way. Good stuff Mike.

@mikesunboxing 2 года назад

yeah it is the actual hands on experience that makes the difference

@backpack8848 Год назад

"This one can go here this one can go there" 9:40

@daveaitken92 2 года назад

This looks like an absolute winner of a product! Very very tempted!

@daveaitken92 2 года назад

Although I'd need 6 new non corsair fans.. damn

@mikesunboxing 2 года назад

it is a decent bit of kit, so much so that after the review i left it in the PC, that is normally a good sign

@Mr_.G 2 года назад

Looks like a nice little product. These things are getting better. Which makes sense.

@mikesunboxing 2 года назад

yes it is a decent bit of kit

@FindtheArise Год назад

Awesome,you answered all questions i had about this product,love you Mike

@mikesunboxing Год назад

Glad you enjoyed it!

@uglybob7505 2 года назад

Soooooooooooo tempted ! Looks like a great bit of kit.

@mikesunboxing 2 года назад

the eight port is a beast, not entirely sure it is worth the money for everyone, but if you have the need for speed it is the best value out there right now

@mustangpapi76 4 месяца назад

Thank you. This hub looks just like the one Thermalright makes.

@noidont8149 Год назад

first review in history that's directly swayed me on a product. I was literally shopping around and scoping the landscape for something with a good bit of connective capacity that hopefully wont fry itself

@mikesunboxing Год назад

Glad I could help! i have been trying lots of hubs over the years and most don't get to the point of review as they are so bad or just fail, so there has been a lot of research behind the scenes

@noidont8149 Год назад

@@mikesunboxing yea most of the reviews on most of the stuff I was looking at were pretty bad. And go figure out of all of them its just about the dirt cheapest in price ;)

@noidont8149 Год назад

@@mikesunboxing whoah I don't have a voltmeter but this thing has got to be pushing more than 4 volts it super heats all my DIY stuff( with admittedly absurdly cheap wiring) to a dangerous level I left the room for 3 minutes and the stuff was nearly on fire wen i came back. But wen it cooled back down I plugged it into the mother board and no heating issue

@macabrecreation1067 Год назад

Thanks a lot for sharing this, sir. You solved my problem. 👍👍👍

@mikesunboxing Год назад

You are most welcome

@mariusponsonnet6193 Год назад

Great video thanks for that! I'm probably going to buy one for myself actually because I'm going to be changing my case soon and it doesn't come with included fans or hubs so this solves one of my problems

@mikesunboxing Год назад

Glad I could help!

@backpack8848 Год назад

"This one can go here this one can go there" thanks man 👍🏽

@mikesunboxing Год назад

No problem 👍

@lr4796 Год назад

This was so helpful thank you

@mikesunboxing Год назад

Glad it was helpful!

@Markknightexeter Год назад

I bought this on your review a few months back as I was saving for a few argb fans, I ended up buying some icue fans with a hub instead. it's still a brilliant product for the price though, I think it only cost me about £8 delivered, I'll probably use it in a future budget build for a family member

@LordPoshnameVonPlumbingparts 2 года назад

I got one a few months back as I'd not enough power to each of my RGB components. I have to say it was an essential purchase and syncs up with the motherboard flawlessly. It's powering 14 ARGB fans (1 rear exhaust, 3 top exhaust, 4 front intake and 6 side intake on the radiator in push/pull), 2 ARGB GPU support brackets (one externally that I've modified into a headset rest) and 2 ARGB strips (1 top, 1 bottom) without breaking a sweat. For that many fans the system isn't unbearably loud which I'm quite surprised at.

@mikesunboxing 2 года назад

wow that is quite the setup

@LordPoshnameVonPlumbingparts 2 года назад

@@mikesunboxing She's not the best but not the worst.

@chottomatekudasai-kun3887 Год назад

Thx, i was curious how much amp it can support, now im pretty sure it will be fine for my setup.

@chottomatekudasai-kun3887 Год назад

On the box, it says it rated for 3.5 amp on the argb, that must be per channel, as you cleary are waay above 3.5 amp with that setup. Quite impressive! (Asus motherboard argb pin is rated for 3 amp fi)

@PapaMav 2 года назад

Thank you Mike.

@jamesmiscellaneous 2 года назад

@Tech-Is-Magical 10 месяцев назад

I was looking to buy a hub for fans speed and one for argb control. After a lot of research I came to your video and I make up my mind. I was having also this hub in my basket,but now I'm going to place the order. I have a lian li o11 dynamic xl and I'm going to buy 6 arctic p12 pwm pst argb. Can't wait to install them. Thank you for advice @mike's unboxing

@mikesunboxing 10 месяцев назад

No problem 👍 hope it all goes well

@WilliamAndrewPhilipBodie 2 года назад

This Review is Worthy of a Support comment & a Like 🙂

@mikesunboxing 2 года назад

Thanks for that

@PapaMav 2 года назад

I am in full support of this Support Comment.

@WilliamAndrewPhilipBodie 2 года назад

@@mikesunboxing People support my comment ??? is my English that bad ???

@mikesunboxing 2 года назад

@@WilliamAndrewPhilipBodie Your English is good :-)

@WilliamAndrewPhilipBodie 2 года назад

@@mikesunboxing Thank's for the kind word Sire 😀

@PaulBakewell 2 года назад

Great looking hub for you power hungry gamers. Great video thanks Mike.

@mikesunboxing 2 года назад

Thanks for watching, Paul :-)

@ronito4390 2 года назад

Looks great Mike. Do you know if this works with SignalRGB? I am looking for a fan and argb solution but don't like messing around with multiple pieces of software to manage RGB, so this will fit the bill if I can use it with Signal.

@mikesunboxing 2 года назад

yes it will as it just relays the motherboard signal to multiple devices

@gaisinskii Год назад

Thanks for the review, Mike! May I ask you a question regarding this product ? I have an ASUS GT501 case that comes with RGB fans and an ASUS ROG STRIX LC II 240 AIO that comes with ARGB fans, will I be able to plug both of those devices into this hub ? If not can you recommend any other hub or solution to my problem ? Best regards!

@mikesunboxing Год назад

looks like they use the standard 5v 3pin argb plug so should be fine

@roburritoDX 3 месяца назад

For the daisy chain. How many would you recommend to chain up into one port for both pwm and argb? I know typically with motherboards you should probably do like 3 but what about the id cooling hub? Also, you could also just use this as an argb hub? I want to connect my case fans into this but leave my aio fans seperate, but i still want to use the hub for the argb on my aio fans too.

@mikesunboxing 3 месяца назад

i have done up to 6 but i feel that 4 or 5 is about right

@TecnoMundoTutoriales Год назад

Great video, good informarion, one question, ca i use this hubs if i dont have any argb or rgb header in My main board? Thanks

@mikesunboxing Год назад

No you will need a controller not a hub

@Senrab46 2 года назад

My F15 came with a small hub and now when I take side panel off the wires are all cluttered and shoved in recesses. I have DC case fans but pwm cpu & upper fans. As my B450 had limited connections these hubs are ideal for ARGB but as my fans are mixed sizes, 20cm & 12cm, & DC/PWM fan speed control is a concern. Would it be worth upgrading fans so they were all pwm controlled? Thanks for reviewing Mike and Kath👍

@mikesunboxing 2 года назад

with the F15 i always found it best to have the 2 200mm fans on the hub and the read connected to the motherboard and increase the rear one speed to make up for the crazy two up front

@Aetherling Год назад

Question please Mike. I ordered the Arctic P12 PWM PST A RGB fans following review (thanks). Do you plug both the 3 pin and 4 pin from each fan into the hub (i.e. one each side)? Thanks.

@mikesunboxing Год назад

yes that is right one plug for the speed and one for the lighting and ignore the passthough

@richmondbryannagera8558 5 месяцев назад

Hi, Mike. I've just realized that my MSI B450 Gaming Plus Max doesn't have a 5V header. I'm using an MSI Mag Vampiric 100r case, and besides the included ARGB fan and front ARGB strip, I've also purchased 2 additional 120mm ARGB fans for the top. It's my first time building a PC so until recently, I have no idea about the difference between the 12V and 5V header. So sad that this controller also requires a 5V connection for the motherboard. With that being said, can you recommend other ARGB Hub/Controller that is compatible with my motherboard, not super expensive, and easy/convenient to operate? Thank you in advance and Happy New Year!

@mikesunboxing 5 месяцев назад

this one might be worth a look ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XyHJFViY-wA.html

@NebulaCraft Год назад

Great video, thinking about buying one myself, but just wondered if this will power 3 pin fans at all (even at full speed), or just 4 pin fans? Thanks :)

@mikesunboxing Год назад

3 pin fans will be at full speed only

@NebulaCraft Год назад

@@mikesunboxing Oh that's fine then, thanks! :)

@elicarreon652 6 месяцев назад

Hi Mike. I'm just wondering cause I have a deepcool case which comes with RGB fans. I recently bought an AIO cooler which is coolermaster. Will the fans fit into this hub? Hope you can answer my question. Thanks!

@mikesunboxing 6 месяцев назад

it the fans are using the standard 3 pin 5v ARGB connection this will be fine. If you are not sure post a picture of the connections on the discord chat

@ReoNetNews 11 месяцев назад

Hi Mike, great review! I have also bought this fan hub 2 days ago for a new pc and attached 8 fans with 3 pin connectors. Unfortunately they all run at 100% and they make a lot of noise. Is there any way to reduce the speed of the fans or any other fan hub that can modify the speed of my 8 fans with 3 pin connectors? No need to set the speed individually, i want to reduce the speed of all of them at the same time if possible. Thanks in advance!

@mikesunboxing 11 месяцев назад

3 pin fans use a different method of reporting and controlling fan speeds, so you will need a different type of splitter or controller. the DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04 you will need two of these to control 8 fans

@ReoNetNews 11 месяцев назад

@@mikesunboxing Hello again m8. Thank you for the help, i really appreciate it!

@jerrythegreek10 Год назад

After watching this video on the HA-02 Hub you convinced me to purchase it. The problem I have is I am little bit confused on how to daisy chain another hub to this one. Mainly ARGB. Do I take the cable that is suppose to plug in the 3 pin header on the motherboard and plug it in one of the hubs ports or do I get a splitter?

@mikesunboxing Год назад

yes take the two or one cable from the new hub and plug it into one of the existing ports on the old or installed hub, it will replicate the same signal again and be boosted with the extra sata power

@jerrythegreek10 Год назад

@@mikesunboxing Thanks

@septicoo Год назад

Hi mike....i bought a lampton sp 901 but the motherboard doesn't read any rpm from the hub connection.Do you need to connect only one fan to the tacho signal sender on the hub or they can be daisy chained to that header?Thank you.

@mikesunboxing Год назад

just one and make sure the header on the motherboard is set to PWM for 4 pin and VDC for 3 pin and a fan on the sense port or port number 1

@cwadeh1 Год назад

Good review! You answered some questions I had that I was having trouble getting an answer for anywhere else. I have an MSI B550 unify, and stupidly plugged in an rgb device to the bottom 3 pin argb header while the system was on, and the header stopped working. So all I have now is the other 3 pin header for any 3 pin devices I might ever control. My question was how to use more than one hub with only one header.. You say I can plug one hub into another.. I was racking my brains worrying whether or not I could use a splitter from the header to signal 2 hubs.. Or if that would damage my board.. I should have had the system powered off before plugging anything in to start with.. Oops. But now I'll just daisy chain a couple hubs.. Another concern I have is some people review hubs on Amazon and say it shorted out their psu or fried their mobo.. I hope it was an instance of user error, albeit unfortunate, and not a faulty hub.. I'd be sick if I wrecked my computer for using a hub.. Anyway thanks again!

@mikesunboxing Год назад

yes daisy chaining powered hubs is fine it acts as a repeater

@cwadeh1 Год назад

@@mikesunboxing good to know. I have 10 Antec Fusion fans (these are a new thing from Antec) 2 EK water blocks, and 2 EK FLT pump res combos going into a Phanteks Enthoo Pro II with a couple of its own argb strips.. the fusion fans have 2 hubs supporting 5 fans worth each of 3pin argb and 4pin pwm, so any EK stuff would need another hub since I only have 1 header.. anyway thanks again Mike, I've been enjoying your channel as a new subscriber : )

@mikesunboxing Год назад

@@cwadeh1 Awesome - welcome to the Channel 🙂

@felipej.benjamin6004 Год назад

hi mike! cooler master fan works with this one? i mean the argb leds..or is there any incompatibility?

@mikesunboxing Год назад

depends on the model of fan, i'm not a mind reader :-)

@felipej.benjamin6004 Год назад

@@mikesunboxing u right sorry, I thought it applied to all cooler master models, so I didn't ask specifically for that reason....cooler master MF 120 PRISMATIC.

@iiiSaav Месяц назад

If I don’t have a system fan 1 would plug into my cpu fan 2 next to my cpu cooler?

@mikesunboxing Месяц назад

do you have a cha or chassis fan header? the board should have at least one somewhere

@EasYE18777 2 месяца назад

Does the sata cable power the rgb and pwr slots? I bought this but the fans dont lite up My motherboard does not have rgb asrock z390 pro4 Thank you

@mikesunboxing 2 месяца назад

yes the SATA powers the ARGB and also gives extra power to the fans

@ralphcalderon2007 Год назад

Sorry for my ignorance but, say you only 3 pin fans, can you skip on connecting the PSL 4 pin wire to the motherboard header?

@mikesunboxing Год назад

i was meaning the ones you are plugging into the HUB the four pin from the hub to motherboard still needs to be connected to the motherboard

@Mrduckz_ Месяц назад

señor pelado podría hacer un video mostrando lo mismo pero la versión id-cooling Ha-02c Sata? Gracias capitán de navío.

@mikesunboxing Месяц назад

not available in the UK at the moment sorry

@Oozaru85 4 месяца назад

One question. I got a similar HUB for my case, and I have 3 Thermalright TL-S12W Fans daisy-chained, with one of them being plugged to the ARGB and PWM port on the HUB. Thing is, the female PWM connectors on these fans are 4-Pin, but the male ones are just 3-Pin. They seem to sync to the same speed tho, so guess it still works. However: I also have 3 fans from another brand. Those three are also daisy-chained with the first one being plugged to my HUB (ARGB and PWM). These fans have 4-Pin PWM connectors (both male and female). Now, these three and the Thermalright ones don't seem to run at the same speed. And as soon as I lower the speed, the Thermalright fans just stop spinning, while the other three run on their lowest speed. When I raise the speed again to get the Thermalrights back spinning, they seem to run quite fast and loud, faster than the other brand fans. I'm using the HUBs remote controller, btw. Not the motherboard port. Any idea whats causing this?

@mikesunboxing 4 месяца назад

yes the fans PWM controller is likely set differently so the RPM range will be out of sync

@Oozaru85 4 месяца назад

Fixed it. Seems the issue was that I didn't plug the PWM connector of the HUB to my motherboard. Now they run much quieter on lower speed. Not sure why it didn't work before, since the HUB control for PWM still worked, but apparently it didn't work right. Ah, well. At least it seems to work now. Thanks for the fast reply.@@mikesunboxing

@mikesunboxing 4 месяца назад

@@Oozaru85 Golad you got it working 🙂

@sabtuxahad Год назад

can this device control the lighting of the fans individually with argb software? because i dont want my fans to be completely in sync

@mikesunboxing Год назад

no they will all be the same, if you want individual fan channels you want corsair or thermaltake, lian li etc

@myr940 Год назад

hello sir! what if your mobo is almost ten years old and doesnt have addressable rgb or any led/rgb header etc, (just plain 4 pin fan pins/receivers)? its a gigabyte h87 d3h.

@mikesunboxing Год назад

you will need a ARGB controller or don't use the lighting part of this

@steadfastscout4606 Год назад

I know this video is a bit old but is this thing compatible with the Be Quiet Light Wings 140mm pwm High speed fans? Mine are just kinda stuck on red, I like red but wanted to do a purple build.

@mikesunboxing Год назад

yes this supports the standards 5v argb to the motherboard so the software will work with it

@GOATMAN-vr7bo Год назад

I’m planning on getting a asrock z690 itx-ax board that has a argb header but it’s 4 pin will this configuration still work? Also hoping to pair it with 2 cooler master slick flow 120mm and was also wondering if that would function with this as well

@mikesunboxing Год назад

ARGB isn't 4 pin as standard, you are looking for a 3 pin ARGB

@GOATMAN-vr7bo Год назад

@@mikesunboxing oh ok thank you I guess I confused myself

@406mill 2 года назад

There's a lot to be said for simplicity! :)

@mikesunboxing 2 года назад

yes keep it simple. makes life easier

@supertaco22 Год назад

does this device allow for custom colors across each of the fans? or will they all be clones of each other?

@mikesunboxing Год назад

all clones of each other

@T4NCUS 8 месяцев назад

Would i be able to use the Lian Li infinity daisy chained fans with this? i am looking to remove the lian li hub so i dont have use the lian li software. basically i just want use my Asus motherboard and have no extra software installed. I will be running 13 lian li fans 3 fans daisy chained x 4 i hope that makes sense

@mikesunboxing 8 месяцев назад

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@T4NCUS 8 месяцев назад

@@mikesunboxing thank you sir i just joined

@GOOse_G_G_ Год назад

Hello, I have a big question, is it possible to control the fans there with a program or somehow

@mikesunboxing Год назад

you can't control them individually. the connected fans will all use the PWM output of the header they are attached to and replicate that to the fans connected

@mkchong2824 8 месяцев назад

Hi Mike, may i know should i daisy chain my argb fans together while also connect all the fans 3pin 5v and 4 pwm into the hub? or i can jz connect all the pwm to the hub while daisy chain them together? will it work the same? Thanks

@mikesunboxing 8 месяцев назад

daisy chain or direct it is up to up really

@mkchong2824 8 месяцев назад

@@mikesunboxingthank you for your reply 🙏

@carlaredmond2885 Год назад

Hi Mike, I have a B450M board with 1 fan header and an rgb header. My new case has 3 3pin fans and Argb controls in the front panel. Could you recommend an adapter/converter for connecting my rgb motherboard to this argb hub?

@mikesunboxing Год назад

is it RGB or ARGB on your board? you didn't say what the exact model was for me to be able to check

@carlaredmond2885 Год назад

@@mikesunboxing sorry it’s an msi b450m pro m2 max , it only has an rgb header

@daniel-constantinandronach6357 Год назад

I'm desperately looking for an answer to this as I'm in this exact situation

@daniel-constantinandronach6357 Год назад

3 aio fans of a certain brand, 3 Lian Li Lancool Mesh II default fans, B450M-DS3H, one single damn rgb header, waiting for this exact hub and a Deepcool Gamemaster 5V 2+1 pin ARGB to 12V-G-R-B 4 pin converter. should I buy a fire extinguisher before trying to hook them up or does this sound safe? it's basically converting the signal to be manageable for the mobo, same as with a daisy-chained splitter ARGB signal and so on. as for the pwm, 6 fans amount to around 6x0.25 amps and the fan headers go up to 2A, so 1.5A out of that. any opinions?

@kristinebryson2701 Год назад

is 3 pin 5 volts JRAINBOW1 and JRAINBOW2 3 pin 5 volts compard to 4 pin is 12 volts it this correct would like to install 4 120 mm fans at top whatz the volts for the fans in the video please and on the other hub is 4 120mm fans front of the case 2 diffenet HA-02 1 extra fan back case total of 9 fans thank you

@mikesunboxing Год назад

yes the jrainbow is 5v 3 pin the rest i am not sure it was a while ago but you can add as many hubs as you like to each other they will daisy chain indefinitely

@martintweets7080 Год назад

Hi! I had a problem with the hub. My motherboard (gigabyte b460m ds3h v2) doesn't recognise the rgb via software (rgb fusion 2.0 / armoury create) Any tip for me?

@mikesunboxing Год назад

@DehetRap27 4 месяца назад

Is it necessary to connect pwm and argb cables opposite each other? So, will there be a problem if I plug the same fan and argb cable into another argb port?

@mikesunboxing 4 месяца назад

plug then in wherever it doesn't make a difference

@DehetRap27 4 месяца назад

@@mikesunboxing thanks

@silverplayer7502 10 месяцев назад

Hey man, planning to buy 2 p14s for the front and 2 p12s on the top. My mobo has only 1 argb header and 3 system fans header. Will this hub work with rgb fusion 2.0 from gigabyte and my concern is that maybe 120mm and 140mm fans connected to the same hub might cause problems.

@silverplayer7502 10 месяцев назад

Or can I just use the hub for the argb for the p12s and p14s and then plug the p14s to a separate system fan header?

@mikesunboxing 10 месяцев назад

yeah keep the fan types separate if you can, otherwise the results can be unpredictable

@WolfGangnero 7 дней назад

A question.. The F1 needs to be with L1 right? or doesn't matter? i'm not sure :)

@mikesunboxing 7 дней назад

the lighting side doesn't matter they can go wherever you like, the fan side at least one fan must be on the first header to read the fan rpm

@Yorozuya4ever 8 месяцев назад

My mobo doesnt have an argb header. How do I work the rgb on my fans?

@mikesunboxing 8 месяцев назад

you will need a separate controller with a remote control, we reviewed the coolmoon one this week, you should take a look

@MrNwn007 Год назад

is it ok to plug in AIO fans and ARGB(from the pump) in this? for example using the radioator fan for pwm replication (white pin). and also i have 3x chained fans in front and the end fan has normal 1x 1rgb 3 pin,1x 4 pin pwm but also PSU cable im guesing to skip that power cable since the hub has its own

@mikesunboxing Год назад

the aio fans need to ber going to the CPU fan header and the argb can go to the hub

@MrNwn007 Год назад

@@mikesunboxing forget the argb. Can i connect all my fans from aio and case to hub and from hub to cpu fan header

@manadol69 Год назад

Can you make one how to daisy chain?TY

@mikesunboxing Год назад

see what i can do

@alikadb9855 11 месяцев назад

M confused with the other two pin .. where should I put it

@mikesunboxing 11 месяцев назад

@vndrade Год назад

will this work in a 4pin/12v rgb header in motherboard?? thank you

@mikesunboxing Год назад

no sorry but there are other ones that will do

@Kempaji21 4 месяца назад

Does every argb/pwm hub come with a argb/pwm double cable? It would help me if someone answers

@mikesunboxing 4 месяца назад

they should do really

@LuisNuvo Год назад

Hello good, what do I do if I bought the case brufen c1 and the board that I bought is the gigabyte H510 s2h? Since apparently it doesn't have the argb connection and I don't know how to properly configure the hub fans so that everything goes well:/ (it comes with an integrated hub and 5 rgb fans) my theory was to connect the sata to it and the hub itself has a little cable that it says pwm and other acronyms and I suppose that all the fans fall on that little cable and you just have to plug it into the sys fan1 right? I don't know if I explain myself 😭🤣

@mikesunboxing Год назад

yes that is right and you can change ARGB from the case button

@LuisNuvo Год назад

@@mikesunboxing thanks a Lot👏🏼

@deathstr0kexorn765 2 года назад

Are there many hubs that actually have their own software so you can actually control each fan independently? These cheap ones are fantastic but I want to be able to control fans at different speeds dependant on temps etc without having to try connect all fans to MoBo

@mikesunboxing 2 года назад

i think only the corsair icue and the lianli come to mind.

@epmcgee Год назад

You can try using FanControl but it may view all fans on the hub as a singular device

@nicolasskywalker9487 6 месяцев назад

Do I connect the hub on sys fan 1 ?on the motherboard ?

@mikesunboxing 6 месяцев назад

Yes that is right

@daveaitken92 2 года назад

MUB HUB CERTIFIED!

@mikesunboxing 2 года назад

lol it really is

@yohan50111 Год назад

can fans be control via bios or free software to adjust fan curve

@mikesunboxing Год назад

either is fine

@MegaZidane98 Год назад

I have a question I have 9 fans ARGB and im going to connect to 5v ARGB header into my motherboard, is it safe to put 9fans using that hub or only 6 fans? Btw im using x570 tuf gaming plus wifi. Thanks

@mikesunboxing Год назад

the hub will be doing the work via the SATA power and connect that to the motherboard header, it will be okay on the hub

@MegaZidane98 Год назад

@@mikesunboxing oh ok, my motherboard has only 1 argb header and its 5volts just want to be safe so that it won't fry my fans

@MegaZidane98 Год назад

@@mikesunboxing another question is im going for 10 fan argb and the hub is only 8 slot can i daisy chain other fan to make it 10 fans in that hub?

@johnpersia2455 Год назад

May I ask if I can connect 10 argb from this hub via splitter cable? I plan to have 7 fans + 2 radiator fans and the argb from AIO. Is it possible if I connect the 7 fans in the 7 argb slots and use splitter cable to connect the 3 remaining argb into 1 argb cable and then connect it to the last slot? Sadly my mobo has only one argb header. :-(

@mikesunboxing Год назад

should be fine

@johnpersia2455 Год назад

@@mikesunboxing Thank you!!!

@shadowwolf2608 Год назад

Just a few questions. If you don't plug a PWM plug into port one can you set the speed of the other fans individually? Can you set the ARGB for each individual device that you plug into the Hub? How does the Cooler Master Masterfan ARGB and PWM hub stack up to this hub in your opinion? I'm not asking you to buy it because I know you buy these items and they're not sent to you via another one of your videos. I just want an opinion on it from someone I think deserves to be trusted. The reason I'm asking is because when I looked it up, one seller on Newegg has 3.5 stars with 3 reviews for it and another has over 4 stars and 40 reviews so I have no idea which is an accurate representation of the product quality. I've also seen one seller on Amazon with at least 4 stars as well and I think 124 reviews.

@mikesunboxing Год назад

no the hub will not have a rpm signal and will just put all fans at 100% the ARGB will just replicate the incoming signal to all connected devices. the cooler master hub is basically the same as this

@shadowwolf2608 Год назад

@@mikesunboxing Thank you

@iwishihadgoodinternet7766 Год назад

Hi, can i use the hub to connect a pump pin to it?

@mikesunboxing Год назад

you could do and it would most likely run at full speed, which might not be a bad thing

@ubetchvill6143 Год назад

hi, just wanna know this port fan can use on nzxt z63?

@mikesunboxing Год назад

depends what your use case is really but essentially yes

@dota2epicmoments578 Год назад

how do you control fan rpm cuz mine always at max rpm

@mikesunboxing Год назад

make sure that fan port one is used for rpm sensing, and in the motherboard set the header to PWM

@flyboysmokes Месяц назад

Can you put the cpu fan on it

@mikesunboxing Месяц назад

yes if you like

@paperbackwriter19 Год назад

How do install this

@mikesunboxing Год назад

plug your fans in to the headers and then the single pwm into a motherboard header

@PapaMav 2 года назад

"things plugged in at every end"

@mikesunboxing 2 года назад

😊

@jamesmiscellaneous 2 года назад

😈

@roland2864 Год назад

Only 3 pin rgb 4 pin fan I can find

@roadi7 Год назад

fan 1 will report the rpm ~ all fans will replicate based on the motherboard header

@mikesunboxing Год назад

correct

@livelongandprosper70 Год назад

Nope, im Still confused @ 5:30 you mention the RPM Reading fan 1 header I still have no idea what this is meant to connect to ?? The motherboard ? A fan ? If a fan, will it run at a different speed to the other fans i attach to the hub ? VERY confusing 😕

@mikesunboxing Год назад

@livelongandprosper70 Год назад

@@mikesunboxing no thanks, I dont do discord..I detest discord.

@andreasms Год назад

Hey Mike, quite late to your video. Super quick question. I am planning to use 7xARCTIC P12 PWM PST A-RGB 120mm. 3 front of case, 3 for cpu cooler and 1 exhaust. Will this hub cover both a-rgb needs and fan speed control needs? Or do I need something else?

@mikesunboxing Год назад

Yes, absolutely

@andreasms Год назад

@@mikesunboxing wow really? Will this also work with gigabyte software to control led color and fan speeds?

@alikadb9855 11 месяцев назад

M confused with the other two pin .. where should I put it

@mikesunboxing 11 месяцев назад

reset switch on case i think if it is the one i am thinking of but not sure