Тёмный

BEST Cheap SATA Powered 10 Port ARGB Hub ROG Branded MultiBao 

Mike's unboxing, reviews and how to
Подписаться 118 тыс.
Просмотров 23 тыс.
50% 1

#rgb #rgbhub #argbhub #pcrgb #rgblighting
BEST Cheap SATA powered 10 port ARGB hub ROG branded MultiBao
Available from affiliate links:
Multibao 5V 3pin ARGB 10 port Hub Splitter
Amazon UK: amzn.to/3r6lvG4
Amazon Local: amzn.to/3LEODLN (similar)
Ebay UK: ebay.us/RVIr19
Ebay US: ebay.us/tFOVU3
Ebay CA: ebay.us/eythpM
Ebay AUS: ebay.us/AGiubx
GAMEMAX 6 Port ARGB Fan Hub
Amazon UK: amzn.to/3Rk8Vf8
Amazon JP: amzn.to/2FQxJKP
Ebay UK: ebay.us/UsnwYa
Ebay US: ebay.us/Jvu65y
Ebay CA: ebay.us/z4qZhC
Ebay AUS: ebay.us/sZPmVv
Magnetic Tape
Amazon Local: amzn.to/3r2kor2
Ebay UK: ebay.us/bJw726
Ebay US: ebay.us/IUCJpT
Ebay CA: ebay.us/E5fSn3
Ebay AUS: ebay.us/AtM9va
Very cheap and easy way to add more ARGB ports to your computer or project. SATA powered and can support up to 10 outputs and possibly you can daisy chain on those as well.
This mostly saves you from overloading your motherboards 5V 3 pin ARGB headers and share the load utilising the extra SATA power direct from your PSU.
About this item
The 110 port ARGB hub can extend any 5V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard.
The 5V RGB hub is Only compatible with 3pin 5V addressable RGB headers or controllers. Please Do Not connect to 12V RGB components, making sure the arrows on connectors and headers line up.
10 way 5V RGB LED splitter hub with PMMA case and double side adhesive compatible with ASUS/MSI 5V 3pin LED controller. Note:This RGB Hub interface is 5V 3Pin, please check the interface before use it.
The function of this hub is to expand the scarce RGB interface on the motherboard.One RGB interface is divided into ten, which is used to control multiple RGB light strips and other devices. It can't power the fan.
Printed circuit board with acrylic protective case, very durable, adhesive tape on the back for easily fixing the hub in the chassistain a stable output even at full load.
Cheap Windows 10/ Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesun...
Discount code: MIKESUNBOXING 7.5% Off
Unboxing Playlist: • Unboxing
Computers & Gaming Playlist: • Computers And Gaming
PC How To Playlist: • PC How To
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
RU-vid membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshirt.co.uk/mikesu...
North Americas: shop.spreadshirt.com/mikesunb...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com/shop/mikesunbo...
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus.energy/rose-gro...
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.mention-me.com/m/ol...
Pay For Items Monthly: www.shopabunda.com/?ref=mikes...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlink.com/589.html
www.premiumcdkeys.com/mikesun... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.com/?rfsn=261416...
Get in touch with us:
Email mike@mikesunboxing.com
RU-vid / mikesunboxing
Website www.mikesunboxing.com
Discord: / discord

Опубликовано:

 

7 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 106   
@mikesunboxing
@mikesunboxing 6 месяцев назад
Available from affiliate links: Multibao 5V 3pin ARGB 10 port Hub Splitter Amazon UK: amzn.to/3r6lvG4 Amazon Local: amzn.to/3LEODLN (similar) Ebay UK: ebay.us/RVIr19 Ebay US: ebay.us/tFOVU3 Ebay CA: ebay.us/eythpM Ebay AUS: ebay.us/AGiubx GAMEMAX 6 Port ARGB Fan Hub Amazon UK: amzn.to/3Rk8Vf8 Amazon JP: amzn.to/2FQxJKP Ebay UK: ebay.us/UsnwYa Ebay US: ebay.us/Jvu65y Ebay CA: ebay.us/z4qZhC Ebay AUS: ebay.us/sZPmVv Magnetic Tape Amazon Local: amzn.to/3r2kor2 Ebay UK: ebay.us/bJw726 Ebay US: ebay.us/IUCJpT Ebay CA: ebay.us/E5fSn3 Ebay AUS: ebay.us/AtM9va
@colinhilton6067
@colinhilton6067 8 месяцев назад
Nice little handy hub for when you’re short of RGB headers.Good review Mike 👏⭐️⭐️⭐️⭐️⭐️
@mikesunboxing
@mikesunboxing 8 месяцев назад
Thanks 👍hopefully it will be useful to a few people struggling to wire everything up
@TammieDessa
@TammieDessa 8 месяцев назад
Mike you show some of the coolest thigs for builds I love this one you are showing I love my RGB too! you are so underrated 💕
@mikesunboxing
@mikesunboxing 8 месяцев назад
Glad you like them!
@JayDee11
@JayDee11 5 месяцев назад
Hi Mike. Like the videos, interesting and informative, keep up the good work. I’d like to share with you and YT viewers something I recently discovered with ARGB hubs that may help if experiencing problems with. I discovered with my PC when connecting such hubs to the computer’s PSU my PC wouldn't start after fitting. After a lot of time checking and testing it turned out it was my motherboard make and design that was the issue. I’ve tried the hub in your video, and a couple of other makes, and all replicated the same problem of my PC failing to start with a hub connected to the PSU. Disconnected from the PSU no problems, disconnected from the ARGB header on the MB no problems. Seems that some motherboard makes / designs don’t like having 5v supply going onto the ARGB headers from a cable connected to it. Once I found what the problem was my solution was to use a two pin cable I made up to connect my hub to the ARGB header on my MB, thus removing the 5v supply from MB’s header going to the hub and of course preventing 5v from the hub going to the header. ARGB hubs powered by a PSU like the one in this video only need to receive ARGB signals from the MB to work and not any power from. I’d have thought all ARGB powered hubs would have been designed in such a way to prevent voltage flow back to the MB header by incorporating either a dedicated MB socket on the hub or a cable for this purpose, from my experiences and testing this apparently is not the case.
@mikesunboxing
@mikesunboxing 5 месяцев назад
they need the active 5v to provide enough power for the connected LEDs a motherboard header power alone won't be enough and you will burn out the motherboard controller if overloaded
@skystalker7700
@skystalker7700 8 месяцев назад
Great review, Mike! It really would have been nice to have the magnet mount - especially if you are not exactly sure where it will work in your case during the build. Simple device, but extremely useful if you require lots of RGB. I guess you could get a fan hub too (if required). “Cheap and cheerful” as a wise man once said! I hope it doesn’t catch fire?!? 😂
@mikesunboxing
@mikesunboxing 8 месяцев назад
yeah fire is generally a bad thing, especially inside a PC tower :-)
@OlettaLiano
@OlettaLiano 8 месяцев назад
Hi, Mike. Personally, I've come to like six pin ARGB Fan controllers because they only have a single wire for both FAN and ARGB. That makes for neater cable managing.
@mikesunboxing
@mikesunboxing 8 месяцев назад
that is the beauty of our relatively open PC eco system, there is pretty much something for everyone
@uglybob7505
@uglybob7505 8 месяцев назад
Nice bit of kit for those who what a feck-load of fans but not many fan headers :-) Thanks for the review, Mr Mike and Lady Kath
@mikesunboxing
@mikesunboxing 8 месяцев назад
No problem 👍
@trsskater
@trsskater 2 месяца назад
This is kind of useless IMO. If you have ARGB you want to address your fans LEDs. not give them all the same signal. That's why we moved away from RGB to get into ARGB. With this kit you are only getting 1 affect on all your fans rather than 1 affect passing through all your fans.
@user-nx1gm4qr6l
@user-nx1gm4qr6l 3 месяца назад
Tnx Man it Helped me a lot ❤❤
@mikesunboxing
@mikesunboxing 3 месяца назад
No problem 👍
@tech4u2022
@tech4u2022 8 месяцев назад
I just got myself a deepcool pwm+argb hub which i recommend as well.
@ignignxkt
@ignignxkt Месяц назад
It’s the one I just got.
@Drewtheelder
@Drewtheelder 8 месяцев назад
I bought mine 5 months ago and it's a great piece of kit, I paid £6.50 for mine from Amazon.
@mikesunboxing
@mikesunboxing 8 месяцев назад
that is a great price
@Lurch-Bot
@Lurch-Bot 3 месяца назад
Just did a build with 5 ARGB fans running off one header. Stress tested it for a long time. No crashes. Aorus B450 Elite V2. I did split the PWM between 2 headers though. LEDs don't draw a lot of power compared to the fan motor. Maybe if you have those ring light ones with a dozen LEDs in it...But those don't really belong in a budget build because they are more expensive. I buy Thermalright ARGB fans. About $15 after tax for 3 and they move more air and are quieter than Lian Li fans that sell for around $70 for three. Expensive stuff is for people who wrongly believe spending more money gets you a better product. You can buy a BMW or Mercedes. Won't be any more reliable than a Camry and will be way less efficient. I drive a Mk IV Jetta (Bora) VR6. It is an objectively better car than an entry level 3 series and was several grand cheaper. The 1 star rating is because people buy this thinking it is an ARGB controller. Some controllers are hubs but not all hubs are controllers.
@mikesunboxing
@mikesunboxing 3 месяца назад
it says hub in the title & thumbnail, and i said it was a hub. i explained it wasn't a controller. 1 star is harsh
@JustFedzz
@JustFedzz 6 месяцев назад
Hey Mike! I hope you're doing great. I recently came across this interesting product called the '12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface'. It seems like a fantastic solution for PWM and synchronize aRGB lighting with fans and cpu cooler I think it would be awesome if you could do a review on it, giving us more insights, showing us how to change lights and demonstrating its performance. Keep up the excellent work, and looking forward to your next video! Cheers!
@mikesunboxing
@mikesunboxing 6 месяцев назад
send a link to it and i'll take a look - EDIT i just had a look, just looks like a most expensive unprotected version of this one
@JustFedzz
@JustFedzz 6 месяцев назад
@@mikesunboxing oh is that so, still would be cool to see that version as it uses glue to stick on as installation and how the 2 differ in contrast. But thanks for the reply :)
@WilliamAndrewPhilipBodie
@WilliamAndrewPhilipBodie 8 месяцев назад
Perfect for a Xmas tree too 😛 Mike's Review & How to is Worthy of a Support comment. Like & a share 🙂
@mikesunboxing
@mikesunboxing 8 месяцев назад
You're the best!
@danmar007
@danmar007 7 месяцев назад
It's a good-looking hub. My first reaction was: ASUS made a fan hub! :-) It's a good idea to check the pins. One input on my NZXT hub had all three pins pointing upwards.
@mikesunboxing
@mikesunboxing 7 месяцев назад
the asus logo is such a rip off, not sure how they get away with it really
@SoftCloud27
@SoftCloud27 5 дней назад
Hey you're a really good creator, answering all the questions everybody has or just conversing a bit. Really nice of you Would 5 meter led strips work with this? If they are connected through cables? I want to put LED strips on my celing, but I'd have to take long cables from the mb to the led strips
@mikesunboxing
@mikesunboxing 4 дня назад
the power output on each port might not be enough for powering that many leds, check the rated input of the strip and compare against the ports on the hub, it might work but i would think that would be too many leds and may need a booster or separate power source
@SoftCloud27
@SoftCloud27 4 дня назад
@@mikesunboxing Thank you for answering! I think that's true, I might just put the led strips on my table and behind my speakers Thanks again!
@Senrab46
@Senrab46 8 месяцев назад
Interesting idea to add argb to a plain case. My dters mb is msi A320m, which doesnt have argb sadly , so would a mb with argb port be better suited to this device? Thanks for reviewing Mike and Kath 🐈👍
@mikesunboxing
@mikesunboxing 8 месяцев назад
yes this needs a 5v argb signal fed into it and a PWM fan signal. It just replicates the signal to every port on the PCB
@matienne
@matienne 6 месяцев назад
@@mikesunboxing is there anyway to get all 9 of my fans to light up if i dont have any argb headers on my mobo?
@alphashot3910
@alphashot3910 3 месяца назад
Hi Mike, would it work to plug in just the argb cable from an aio water block to the hub since a motherboard I'm looking at is pretty perfect for me apart from only having 1 argb header (Gigabyte B650m gaming x ax)
@mikesunboxing
@mikesunboxing 3 месяца назад
yes
@Hamad-re9vr
@Hamad-re9vr 6 дней назад
You are the best thank you , when my motherboard support aura sync does this allow it to work normally for changing colours ( because i will add more fans using this hub ) ? Thanks again
@mikesunboxing
@mikesunboxing 6 дней назад
Yes it will
@Hamad-re9vr
@Hamad-re9vr 6 дней назад
@@mikesunboxing thanks alot bro 🙏🏻
@Seahawkofficial
@Seahawkofficial 2 месяца назад
thanks bro
@mikesunboxing
@mikesunboxing 2 месяца назад
thanks for watching
@bawniiii
@bawniiii Месяц назад
I have gigabyte b550m and im new with all these rgb stuff. I'd like to know if i connected all my fans on this device, can i change the color of leds via rgb fusion?
@mikesunboxing
@mikesunboxing Месяц назад
yes you can
@nochiwan
@nochiwan 2 месяца назад
Hello! Hope you are doing great. I want to know if I use this argb hub, could I control with armour create?
@mikesunboxing
@mikesunboxing 2 месяца назад
Yes you can use armoury crate, the splitter or hub will replicate the signal from the motherboard header to all the devices connected to the hub
@facelessvaper
@facelessvaper 8 месяцев назад
Recommendation for one that does effects? The mystic effects aren't great, lightening for example only allows white flash not different colours. (dragon software)
@mikesunboxing
@mikesunboxing 8 месяцев назад
Signal RGB is really good and offers a lot of customisation
@facelessvaper
@facelessvaper 8 месяцев назад
👍Done any vids??@@mikesunboxingEDIT got it👌
@NHIM_CS
@NHIM_CS 19 дней назад
Does ARGB Hub ROG support the MSI Center application for Mystic Light?
@mikesunboxing
@mikesunboxing 19 дней назад
Yes it does
@Daniel-vb6xd
@Daniel-vb6xd 6 месяцев назад
Hi Mike. What if I have't any aRGB input on my motherboard, but now I need two. How to connect this hub?
@mikesunboxing
@mikesunboxing 6 месяцев назад
one of the these might be a better option
@supercrash1991
@supercrash1991 7 месяцев назад
Hello friend my english not so good but is this good but this hun can control the speed fans and argb light ?
@mikesunboxing
@mikesunboxing 7 месяцев назад
only the lights not the fan speeds
@jaskaranitaly
@jaskaranitaly 2 месяца назад
Dose this work if my motherboard dosent have aura sync or any other led controlling?
@mikesunboxing
@mikesunboxing 2 месяца назад
no it is a splitter or hub so it needs a controller to feed it the signal
@Shrektus
@Shrektus 2 месяца назад
I think I'm more interested in that controller thing you got there functioning as a motherboard. I have one question though, is it PWM + ARGB + Controller?
@mikesunboxing
@mikesunboxing 2 месяца назад
the controller was the gamemax argb hub it is okay the PWM on it is a bit hit or miss
@Shrektus
@Shrektus 2 месяца назад
@@mikesunboxing so that's gonna give me PWM + ARGB + ARGB signal? My motherboard has no ARGB header and it'd be great if I could skip having to buy a controller separately just to get the ARGB signal
@razmanrhoads2078
@razmanrhoads2078 6 месяцев назад
Do u recommended it? Or just go with trusted brand like cooler master and thermalright?
@mikesunboxing
@mikesunboxing 6 месяцев назад
Yes it does a great job but at a lower cost
@Duckster_1
@Duckster_1 2 месяца назад
Hello i have a non argb motherboard how can i change the argb on my cpu cooler?
@mikesunboxing
@mikesunboxing 2 месяца назад
you will need some form of controller, we did a video on the gamemax and coolmoon ones, worth watching
@mbs4073
@mbs4073 4 месяца назад
Can i connect this device to the DeepCool RGB Convertor? I have 12V 4pin slot instead of 5V 3pin on my mobo
@mikesunboxing
@mikesunboxing 4 месяца назад
you can but it will just make your ARGB devices RGB
@AliRazaNour
@AliRazaNour 8 месяцев назад
Hey, Mike! I would really like for you to review XIGMATEK STARLINK ULTRA ARGB
@mikesunboxing
@mikesunboxing 8 месяцев назад
don't think anyone in the UK stocks Xiggmatek, but i will bit them on the list of things to look out for
@AliRazaNour
@AliRazaNour 8 месяцев назад
@@mikesunboxing Hope you find them, Mike. I love your reviews and thoroughness. Keep up the good work, sir
@cry_about_it21
@cry_about_it21 2 месяца назад
can u help me i put the fans in they spin but dont recive any RGB anytips to help
@mikesunboxing
@mikesunboxing 2 месяца назад
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@alinioanmoroi1370
@alinioanmoroi1370 8 месяцев назад
This has the sata power as well drain the power from a-rgb header...if you want only sata powerd I probably cut the 5v pin that came from motherboard so it is only powerd by sata
@matienne
@matienne 6 месяцев назад
will the lights still work if you cut that wire?
@JamaaLKellbass
@JamaaLKellbass 3 месяца назад
interesting.... i think rgb is not powered by sata. sata power is only for the fans. what a bummer
@ashgilbertaaa5900
@ashgilbertaaa5900 2 месяца назад
what do you do if your motherboard does not have an argb header ?
@mikesunboxing
@mikesunboxing 2 месяца назад
buy an add on controller like the one we reviewed and linked in the video description
@Jonathanmf12
@Jonathanmf12 6 месяцев назад
Hi I’m just wondering does this work on signalRGB ?
@mikesunboxing
@mikesunboxing 6 месяцев назад
yes it will work with the motherboard headers in signal rgb
@Ozzie2712
@Ozzie2712 28 дней назад
Hi, if I plugged my aio into it would it work?
@mikesunboxing
@mikesunboxing 28 дней назад
If the aio uses 3pin 5 volt addressable RGB yes it will
@DavieC-xq6wo
@DavieC-xq6wo 8 месяцев назад
I use Thermaltake FP -10 Commander Port Hub for PWM Fans , 10 Ports, 4pins, SATA Power Input, Only £12.98
@mikesunboxing
@mikesunboxing 8 месяцев назад
i will check it out
@chumbawumba1959
@chumbawumba1959 8 месяцев назад
No longer available on AMZ US or AMZ UK, did find on eBay US from China Seller :(
@mikesunboxing
@mikesunboxing 8 месяцев назад
UK is available and cheaper just checked it
@JamaaLKellbass
@JamaaLKellbass 3 месяца назад
what you mistaken is that this item is not POWERED ARGB hub, its just splitter. You can connect 128 leds maximum in total. i found that the hard way, i connected 2 strips of 128 leds and it started to flicker and strips exploded as well as argb port on motherboard z790 is fried. so sata power is for powering the fans, not rgb. So i found out that this hub works the same as rgb splitter cable. so it was useless for me.
@mikesunboxing
@mikesunboxing 3 месяца назад
interesting, what were your leds rated at? those don't sound like PC leds
@JamaaLKellbass
@JamaaLKellbass 3 месяца назад
@@mikesunboxing hi. I'm using ws2812b 5v 3pin led strips. I can connect two strips with 120 leds maximum, and it gets dimmer. Considering 120 leds draw 36W makes sense. If i would like to connect 3x 2m strips with 60leds/m it would draw 108W. I learned the hard way 😂
@JamaaLKellbass
@JamaaLKellbass 3 месяца назад
@@mikesunboxing i came here because I was searching for argb powered hub, not powered fan hub with rgb splitter. That's what it is.
@Angel-em6od
@Angel-em6od Месяц назад
​@@JamaaLKellbassSo actually the sata connector doesn't do anything? Is all the power taken from the ARGB port?
@Angel-em6od
@Angel-em6od Месяц назад
And what happened to the other components, were only your ARGB port and the LEDs damaged?
@traffic2422
@traffic2422 4 месяца назад
does this need to be plugged into a motherboard
@mikesunboxing
@mikesunboxing 4 месяца назад
Yes and a power supply
@traffic2422
@traffic2422 4 месяца назад
@@mikesunboxing how would i use this if i dont have a rgb heafer on my motherboard
@traffic2422
@traffic2422 4 месяца назад
are there any controllers that are only connected via power supply?@@mikesunboxing
@Heitorr
@Heitorr 6 месяцев назад
How many amps it holds?
@mikesunboxing
@mikesunboxing 6 месяцев назад
i think it is listed in the product description section, i can't recall from the top of my head sorry
@EmirhanDemir-xt7eb
@EmirhanDemir-xt7eb Месяц назад
Reset tuşuna bağlanıyor mu
@mikesunboxing
@mikesunboxing Месяц назад
no it isn't just the ARGB from the motherboard
@EmirhanDemir-xt7eb
@EmirhanDemir-xt7eb Месяц назад
Rezey tuşuna bağlanıyor mu
@mikesunboxing
@mikesunboxing Месяц назад
no it isn't just the ARGB from the motherboard
@jeffreygleaves2931
@jeffreygleaves2931 3 месяца назад
I guess your video was a hit. They jacked the price up to $22 US.
@mikesunboxing
@mikesunboxing 3 месяца назад
try on ali express usually about £5 or look for a similar model there are a few around
@pulemec
@pulemec День назад
Useless, money wasted. I don't have 3 pin connecter to the motherboard. What's the point if you already have power sata from psu. I have to buy another cable.
@mikesunboxing
@mikesunboxing 16 часов назад
the connection should come with the hub
Далее
The ULTIMATE Raspberry Pi 5 NAS
32:14
Просмотров 1,4 млн
12v RGB to 5v ARGB Hub
17:45
Просмотров 7 тыс.
I Got Scammed - Fake 4TB Samsung SSD from AliExpress
22:59
Ultimate Guide To RGB Controllers And Adapters
15:56
Просмотров 123 тыс.