Best Woodworking Tips And Tricks - The Good Stuff (2020)

Подписаться 323 тыс.

Просмотров 306 тыс.

50% 1

Best Woodworking Tips And Tricks. In this video ROb Cosman shares some of his best woodworking tips and tricks. These tips and tricks can take a lifetime to learn but forget that and learn what Rob has. You will love these best woodworking tips and trick video
----------
If you like our content please LIKE us, SUBSCRIBE to our RU-vid channel, and RING THE BELL to be notified whenever we release a new video.
_______
* ROB'S ONLINE WORKSHOP - robcosman.com/pages/rob-s-onl...
* SUBSCRIBE TO ROB"S MONTHLY WOODWORKING TIPS NEWSLETTER - lp.constantcontactpages.com/s...
* QUESTIONS - Have a question about the Tools, Techniques, or Anything Else you saw in this video? Post your question in the comments section of this video!
* VISIT OUR STORE - To learn more or purchase any of the tools you saw Rob use in this video, please visit our retail store at www.robcosman.com
* SUBSCRIBE TO ROB'S RU-vid CHANNEL - / robcosmancom
* LEARN ABOUT ROB'S PURPLE HEART PROJECT: robcosman.com/pages/php-what-...
* DONATE TO THE PURPLE HEART PROJECT: robcosman.com/products/how-to...
* FOLLOW US ON SOCIAL MEDIA:
FACEBOOK - / robcosman
INSTAGRAM - / robcosman_handtoolwood...

Хобби

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 278

@philandlyra3365 3 года назад

You sir are a real treat to watch.

@jamesallen6007 3 года назад

Thanks for the tips Rob.

@rickmccaskill7888 3 года назад

Great tips. Thanks for pointing me to this when asked about the clamp handle wrapping.

@woodturnermark8529 3 года назад

Great tips Rob ! I get so much out of your videos, Thank You for sharing !!

@milesjay2330 3 года назад

Brilliant! Thank you 🙏

@torymiddlebrooks 3 года назад

So deeply helpful!

@pmacgowan 2 года назад

Love the jigs for corner joints, very clever

@markforrestsm 3 года назад

Thank you Rob for sharing your expertise with us. Regards & blessings, Mark

@RobCosmanWoodworking 3 года назад

Thanks for watching

@makediywoodworking2700 3 года назад

Tips 6 and 7 I will use in my work. Thank you! 👍

@123reivax123 3 года назад

Thanks again Rob Every single tip entirely thought out. Many thanks, what a legacy you are building.

@RobCosmanWoodworking 3 года назад

Thanks for watching and commenting

@kainemeshkin6662 3 года назад

Going to use some of these, great tips as always. Thanks Rob and team!

@RobCosmanWoodworking 3 года назад

Glade you liked yhem

@davidbaldwin2342 3 года назад

Thanks for another very informative video, keep them coming. Good wishes, Dave UK

@rjamsbury1 3 года назад

Loved the split dowel to centre the pressure from pipe clamps - genius! Thanks for all these Rob.

@RobCosmanWoodworking 3 года назад

Thanks for watching and commebting

@franciscoayala1062 3 года назад

Awesome tips. Using these in the future. Thanks. 👍🏻👍🏻👍🏻👍🏻👍🏻

@harrymason1053 8 месяцев назад

Good tips!

@mymai2792 2 года назад

Yes...love your style of teaching. Thank you for a great vid. with helpful tips I'll be able to use.

@birdbandit9 2 года назад

Love the channel and all the tips. Thank you.

@motrebal 3 года назад

I have followed and bought your stuff for years and I think this is actually my fav video, well done, all tips were relevant

@adamdearing918 3 года назад

Excellent tips Rob, thank you very much! 👍👏👏

@RobCosmanWoodworking 3 года назад

happy togive them out

@fakeprofiles5003 3 года назад

Thank you

@robertkerby2581 3 года назад

Well done!

@neilrobertgrayson 3 года назад

Watched this a while back and wanted to try a few. Ice hockey is not so prevalent in the uk but I eventually found some tape. I am 64 going on 65 so losing a bit of grip. Followed Robs tip in clamps and its brilliant will be looking where else I can use it. Thanks Rob just brilliant.

@johnbell7552 3 года назад

Thank you for some really useful tip 👍

@chadames8645 3 года назад

Awesome tips! Really impressive that you replied to so many comments.

@jwd888 2 года назад

rob = so much knowlegde to share, Me = so much to learn.

@andrewcheckley4316 3 года назад

All of these tips are so simple yet so very effective, thank you for sharing.

@wood-worksite8966 3 года назад

Truly! It is.

@davidstarr4349 3 года назад

Really a good post... great tips.

@donnajackson7712 3 года назад

Love the cooking apron.

@Ammed_KN6STX 3 года назад

This is a great video, learn some new trick to make work easier!!!! Great Job Rob & Jake!!!

@RobCosmanWoodworking 3 года назад

Of course its great COL Luther developed it

@JamesSmith-su3oz 3 года назад

I have watched sevral video's on how to " fix " a bad glue up and you show how to not just fix but dont make a bad joint. Thank you Rob and staff.

@RobCosmanWoodworking 3 года назад

Thanks for watching and commenting

@danielhanawalt4998 Месяц назад

Good tips for joining corners for making picture frames and boxes with mitered pieces. I've fought with those and the clamping jigs you made for them is a really good method I think. I'll give it a try.

@skf957 3 года назад

All are great tips Rob. And really well explained and presented. Thanks for sharing.

@RobCosmanWoodworking 3 года назад

Thanks for watching

@williamshaffer2562 3 года назад

Professor Cos you have done it again. Good tips for all to know. Nice job

@RobCosmanWoodworking 3 года назад

Thanks

@user-qg6fy4yp8t 3 года назад

Thanks 👍👍👍for the awesome tips!!

@RobCosmanWoodworking 3 года назад

Thanks for watching and commenting

@ianmcfadden4709 3 года назад

great tips

@Claus1234 3 года назад

Like the way you move your hands. Calm and precise like a pro does :)

@dkbuilds 3 года назад

Love the tip for tiny dovetails. Could've used that for the tiny wood hinge box I made last weekend! :)

@RobCosmanWoodworking 3 года назад

7 days too late, dang

@dennisnolan2544 3 года назад

Excellent presentation

@lewisway6811 3 года назад

Good Stuff indeed.

@RobCosmanWoodworking 3 года назад

Thanks

@theworkshopboxshop 3 года назад

Thanks for putting together yet another great video never a problem always a solution look forward to the live show 💯👏

@RobCosmanWoodworking 3 года назад

Thank you for watching

@paultay23 3 года назад

Hi Rob. Thanks for the tips... I have used the iron tip on a couple of dings on a chopping board i made last week ...worked great. I have also wrapped my f Clamps as you described, make a massive difference... Thanks Paul in the UK

@jiwbink 3 года назад

Rob, This video is the first time I have EVER seen anyone other than my dad use that friction tape trick!! Take 6,8 # beater,with head in hand handle between elbow and hip,make A mark just inside bicep,cut off handle and wrap as shown in your video. INSTANT SUB!!

@johnburens3395 3 года назад

Being a quick study kinda guy I immediately went out and got some hockey tape for my clamps and other stuff upon receiving my Cosman fret saw and seeing the tape. My boss plays hockey and recognized it right away.

@bearthompson6506 3 года назад

Cool! Great collection of tips. Gotta go wrap my clamp handles now!

@RobCosmanWoodworking 3 года назад

Yes you do

@SteveMetcalf 3 года назад

First! Love this channel. Keep it up, Rob!

@RobCosmanWoodworking 3 года назад

Thanks for watching

@ronaldschmit4205 3 года назад

Excellent video, love the clamp handle tip, I use a lot of Jorgensen F clamps and the handles are about 3/4" and my large old hands will benefit greatly with the tape on them, keep up the good work, very enjoyable videos. You are a natural teacher.

@RobCosmanWoodworking 3 года назад

Thanks , you will find the tape trick works great

@daveweber1331 3 года назад

Every single tip is one I can see myself using in time. Thank You!

@Exodus5K 3 года назад

I was worried when I saw Rob posted a "tips and tricks" or "hacks" video, and I was concerned it would end up being click-bait tips that no one actually ever uses. But there wasn't a dud in the whole video, just a lot of great advice.

@RobCosmanWoodworking 3 года назад

Great to hear!

@RobCosmanWoodworking 3 года назад

Glad it was helpful

@hayleyscomet1 3 года назад

First video, new subscriber. Thank you

@dirkhaar2243 3 года назад

Tip #1 is worth to watch the rest.

@jimcooney9019 3 года назад

great video thanks for sharing

@RobCosmanWoodworking 3 года назад

Thanks for watching

@jamartin1 3 года назад

I’ve been meaning to inquire about the grip stuff you use on handles. And here it is Tip #1! Thank you very much!💜

@RobCosmanWoodworking 3 года назад

You wanted it you got it

@Exodus5K 3 года назад

Apparently, if you ask a Canadian woodworker how to improve a clamp the answer is hockey tape. Now I'm wondering if Canadian plumbers have got hockey tape running up their plunger handles :)

@ianpearse4480 3 года назад

Thanks, some great tips. Love it. Off to the shop to start making some jigs I think. Cheers.

@RobCosmanWoodworking 3 года назад

Send me some pictures

@davidcampbell2845 2 года назад

Magnificent example of public information as always. Still love the intro - hasn't aged a bit, spot on.

@sueb4154 3 года назад

So , for many years, being a hockey enthusiast when I was younger, I wrapped rope around my hockey stick and then covered it with electrical tape ... I almost fell off my chair the first time I saw you spin the roll of tape to make it's own rope! That's a great tip for folks that don't have a lot of strength in their hands ... really helps to tighten those clamps. Thanks, Rob. Great pipe clamp tips and miter joint perfection ... all so simple, yet so effective!

@RobCosmanWoodworking 3 года назад

Glad you liked it. Come on up and do a skate with us

@stinkytoomey 3 года назад

I remember the first video of yours I watched and noticed the stick tape. Brilliant.

@RobCosmanWoodworking 3 года назад

Try it and let me know what you think

@stinkytoomey 3 года назад

@@RobCosmanWoodworking I did it several weeks ago when I first came across your channel & website. Simplest, most useful tip yet. Beauty. Thanks!

@paulkarch3318 3 года назад

Really good.

@RobCosmanWoodworking 3 года назад

Thanks

@grega1207 3 года назад

Great stuff, #3 is worth the price of admission! :-)

@RobCosmanWoodworking 3 года назад

Glad you liked it

@cnyberg78 2 года назад

For the dent repair, if you add a little dish soap (say a drop per 1/4 cup) it eliminates the surface tension and will get into wood fibers better to expand when ironed.

@andrewbrown8148 3 года назад

Great info~! Love the iron tip for dents~!

@RobCosmanWoodworking 3 года назад

Try it

@turningpoint6643 3 года назад

@@RobCosmanWoodworking It works very well, I picked that one up maybe 30 years ago from one of my gun smithing books. If anyone is critical about dents in wood and that have it easily happen just using them it's gun owners. That iron can also be used to warm up and help draw out and remove lubricating oil from wood. It does take multiple times, but if your patient it works very well also. Warm the wood, wipe the oil off that comes to the surface and repeat until you get tired of doing it. :-)

@gilbertomanzanilla4333 3 года назад

Thanks for the info. Rob, i"ll be doing that hockey tape tip on all my clamps, always wondering what was that on the clamps, i got it now thnks rob..

@RobCosmanWoodworking 3 года назад

Works like a charm

@TheTranq 3 года назад

Nice tips Rob thanks for sharing. I like the one for the tail/pin alignment. Although I just received my Veritas skew rabbet plane anyway 😂 now I’m trying to figure out how to heat the garage for the winter

@RobCosmanWoodworking 3 года назад

One of those propane blow torch heater things

@robertbamford8266 3 года назад

A steady stream of useful tips! Thanks for the video. Hmmm. Buy a saw to get the box? 😊

@neilrobertgrayson 3 года назад

As you say with age those clamps become more of an issue so I will be taping mine. Also like the artificial shoulder for dovetail joints using tape. All great tips. Thanks for sharing.

@RobCosmanWoodworking 3 года назад

Thanks for watching

@kenstewart687 3 года назад

Great video keep up the good work. 👍

@RobCosmanWoodworking 3 года назад

Thanks

@storylineamerica4108 3 года назад

Thanks a million for the pipe clamp hack.

@RobCosmanWoodworking 3 года назад

Thanks for watching

@RobCosmanWoodworking 3 года назад

Thanks for watching

@AljazJelen1992 3 года назад

Awesome video Rob! I wish I could somehow spend time in your woodworkshop and learn new tricks. Even just brooming the shop would be fine at that point :D Yet I am living 5000 km away :D

@jason4547 3 года назад

Even tho you're obviously old and weathered ! I'm impressed with your ingenuity and the intuitive designs you've adapted to maximize efficiency in your trade.

@mymai2792 2 года назад

Not sure he's 'obviously' old or weathered. Geez he barely looks 40!!! Little harsh judgement for a very skilled person ...what has his age got to do with this skill? There's 20 yr olds who are walking manuals ...& 75yr olds who don't know their way around a bolt.

@rick91443 3 года назад

Thank you...Always learn so much....cheers...rr Normandy, France

@RobCosmanWoodworking 3 года назад

Thanks do much. Where in Normandy are you?

@rick91443 3 года назад

@@RobCosmanWoodworking a ten minute walk from "la Haras du Pin," horse breeding country. rr

@timickan Год назад

So incredibly helpful video, thanks. We call "C" clamps "G" clamps in Australia.

@lawrencedeleurere4427 3 года назад

Wow, that painters tape trick for dovetails is awesome! I have always put in the rebate, but the tape seems so much easier. I'm gonna use that tonight. Thanks for the tip.

@RobCosmanWoodworking 3 года назад

Let me know how it goes

@lawrencedeleurere4427 3 года назад

@@RobCosmanWoodworking It worked like a charm. I used 6 layers of normal painters tape rather than automotive tape, but it did the trick perfectly! I was using hard maple, so the dovetails didn't turn out as nice as I'd have preferred, but no fault of the painter's tape. My personal opinion is that it's way better than the rebate plane trick. With the plane, there's always a chance for a small margin of error if you haven't quite set it up correctly, with the tape, you're spot on. Awesome advice. Thanks.

@mikaelfischer8429 3 года назад

👍👍👍👍👍👍👍👍👍👍 Awesome Hacks.

@RobCosmanWoodworking 3 года назад

Glad you liked it

@papergatorzfedducca7998 Год назад

New subscriber 🔥🔥🔥🔥

@fayz44awad 2 года назад

👌👌👌

@jeffwilder7117 Год назад

I like your tips. I bought some rubber bike handles that were the same diameter of my Bessey handles. Sprayed a little water for easy insert, and now have a great handle on my clamps. I’ve also found if I use a spacer to raise the pipe clamp up off the wood, so the center of the ‘screw’ is in the center of your wood, you don’t have that bending problem. Just my own observations.

@davidcook9321 3 года назад

Nice iron, I have the same one and still use it

@jeremyonfire1 3 года назад

For removing dents: a $20 heat gun is quicker, handier, and works better than the iron in my experience. You don't even need the cloth, just apply water, wait a few seconds, and then heat until it is dry. Dent disappears like magic.

@danielgeng2306 3 года назад

Love the hockey tape idea, I picked that one up years ago when I saw you do it, even got pink tape for my wife :)

@RobCosmanWoodworking 3 года назад

Pink tape!!!!

@sueb4154 3 года назад

You go Daniel! Nothing better than PINK!

@danielgeng2306 3 года назад

@@sueb4154 not that I have anything against pink but it was FOR MY WIFES GARDEN TOOLS ! Lol how are ya SueB ?

@stanhawkins1023 3 года назад

New apron! Wow.

@RobCosmanWoodworking 3 года назад

Its great

@MANJITSINGH-ko2oi 3 года назад

HI rob really cool simple tricks. weldon. and they work.

@RobCosmanWoodworking 3 года назад

Yes they do

@jaywood8296 3 года назад

I've used friction tape on clamp handles, etc. for years, and more recently hockey tape. After seeing yours a while back, I started adding a piece of string or cord under the middle of the strip of tape while wrapping it on the handle- works great!

@af4147 3 года назад

Whoa! Very nice set up. I'm definitely going to make me as set of those holders. I especially like the sand paper glued to the bottom to avoid slippage. Since I don't have as many clamps as you do, so, would a pair of thick rubber bands work to hold them in place? Thanks again.

@przybyla420 3 года назад

No iron needed, just a thermos or pot of boiling water. Dip a plastic spoon in and dribble over the dent. But the boiling water trick won’t fix the dent if there are torn fibers - neither will anything else, it needs to be removed, covered with inlay or built back up with filler (or better yet, left alone... or covered with those lacy things Grandma had tons of).

@Exodus5K 3 года назад

I wish I had seen your tip #8 for my last project (a painted plywood small chest of drawers). I tried super gluing smaller clamp blocks on to the mitered case and tap them off with a hammer when done, let's just say I was doing a lot of repair work with bondo before painting.

@RobCosmanWoodworking 3 года назад

Yup, I can see it

@terryoconnor3545 3 года назад

Hello Rob, Loved your video. The way you explain things is very concise and I especially like the fact you don't have music playing in the background. While a lot of the tricks would be beyond my SKILL? level it's nice to know how things are done. However I'm very interested in square stops you have built into your bench. Especially how (a) how did you attach them to the bench and (b) how you bring only one stop without raising all of them. Kindest regards Terry

@meh84f84f 2 года назад

If I understand correctly, you are talking about his square bench dogs. I believe he goes through how he made his in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5scnp5Hx5ho.html But they are basically rectangular prisms that fit into square holes in his bench, and they have a sprung portion that provides the friction between them and the hole which holds them in place. They work very similarly to round bench dogs if you are familiar with those.

@lor191ric 3 года назад

Hi Rob great tips I already taped all my clamp, mallet, and reamer handles works great I've been passing this tip on to my friends and have told them they have to check out your site thanks for helping to improve my craft. Are you going to bring in the European bessy f clamps

@RobCosmanWoodworking 3 года назад

We have been thinking about it

@raydriver7300 3 года назад

Such an interesting and informative video, Rob. Love your style

@JeremiahL 3 года назад

This is one of my favorite channels... Keep cranking it out.!

@RobCosmanWoodworking 3 года назад

You keep watching and we will keep filming

@watermain48 3 года назад

That was a great bunch of tips Rob, thanks for sharing them. Happy Veterans Day to all my brother vets and welcome home to all my Vietnam vet brothers.

@meleader 3 года назад

For small dents, put water in the dent, let it sit for a while then use the tip of a soldering iron on that spot. Don't touch the wood. Works like a charm!

@RobCosmanWoodworking 3 года назад

Good tip

@ianmcfadden4709 3 года назад

WHAT!!! a new apron

@wood-worksite8966 3 года назад

Keep uploading such content. It's a Fantastic video. Fortunately, Few years back.. I met someone, a Woodworking mentor, who changed my life. Excellent work, Waiting for your next video.

@pmvoice88 3 года назад

The Bob Ross of woodworking.

@Dan-qn3su Год назад

Drill a hole perpendicular to and through the clamp handle then stick screwdriver through hole for leverage to clamp

@Mr_Rick 3 года назад

DENTS: Wet the rag first. A dry one wicks up & away the water too fast. Then add a bit to dent. Lay soaked rag over dent. Place iron setting on "cotton". Then iron out the area until rag is near dry.

@cbryantbear6498 3 года назад

Thank you!!! Question, how do you cut the splines on the miters? I can see how you do it on the 90 degree but can’t see it for the 45 degree.

@RobCosmanWoodworking 3 года назад

Hold the part on a 45 degree angle on your tablesaw

@PhilTerrano 3 года назад

Thanks for the awesome tips! Just curious- can you plane the CA glued joint and then apply finish?

@RobCosmanWoodworking 3 года назад

Yes

@1deerndingo 3 года назад

Great tips. Q. Does the Super Glue leave the surface "ready" for finishing with lacquer or oil or whatever. Or do you have to plain away the surface covered by the glue.

@RobCosmanWoodworking 3 года назад

You ned to prep the surface by planing or sanding

@storylineamerica4108 3 года назад

Here's one you might like, try golf club grip tape if you need a good double-sided tape that's inexpensive and durable.

@RobCosmanWoodworking 3 года назад

I will try it

@jcoul1sc 3 года назад

Use self amalgamating tape (in plumbers supply area or shop )too. Rubberised,, grippy and easy to apply. U might not need the cord underneath with this. Its fragile but easily fixed too.

@cuttiesayyyeeeeCA187 2 года назад

The chord is the meat of the secret, my brother. Not the tape. Hockey and baseball players would all agree. Hell, I’ve wrapped tools with masking tape and the same technique and have had meteoric results. Try scotch tape for heavens sake! Haha Ergonomics.

@jefflavenau6805 3 года назад

Rob! I recently received one of your dovetail saws and using it is a joy! I'm hoping to snag a skew block plane this week, but can you maybe use your pull with IBC to get more blades for them made? Even LN doesn't have them in stock. No matter what, thanks for all you do!

@RobCosmanWoodworking 3 года назад

We have been trying for months to get more blades from IBC but they just are not playing ball

@jefflavenau6805 3 года назад

@@RobCosmanWoodworking good to know! Have you had any experience with the veritas skew block? it also uses a fence and is actually still in production.