Big 1.3m long 3D printed RC vessel DFDS "Ark Germania" 1:150 Scale

Подписаться 327

Просмотров 18 тыс.

50% 1

Hello !
I present the model of the ship "Ark Germania"
Printed with Bambu Lab P1S and AMS. Printed with almost no post processing, straight from the printer. Only the underwater part was painted with spray paint.
She sail very nice. I found no leakage after 20 minutes in water.
I described the details in the "manual" file available for download together with the model.
STL Files: www.thingiverse.com/thing:640...
STEP & 3MF files: cults3d.com/en/3d-model/gadge...
Length: 1.32 m
Width: 0.2 m
Weight without ballast 4.5 kg
Weight with blast 7 kg
Printing time 175 hours
0:00 - Introduction
0:48 - Hull Asemble
2:43 - Propulsion & Electronics
4:48 - Deck & Details
8:17 - Sea trials

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@anthonyxuereb792 Месяц назад

Seeing is believing, remarkable to say the least.

@skupper672 6 месяцев назад

I hope to see an oil tanker model of the same size! Great work!

@MMalinaPL 6 месяцев назад

Thanks! Next is going to be crane ship.

@skupper672 6 месяцев назад

Thats awesome! @@MMalinaPL

@BigBallardTT 7 месяцев назад

Great job! Looks amazing!

@magdalenameirowska1659 7 месяцев назад

Brawo Malina, jesteś niesamowity

@voltran86 6 месяцев назад

perfect job. congrats

@aleksandraulikowska1991 7 месяцев назад

piękna robota, gratuluję!🎉

@koszmarzulicyrownej6032 7 месяцев назад

Super project 😎

@giorgiomicolani6653 6 месяцев назад

complimenti stupendo

@harunknal8089 7 месяцев назад

Grat jobs. thanks

@rocco3br-nd8oz 7 месяцев назад

Good

@bernarddostie8892 7 месяцев назад

Nice looking boat there! Bravo! How does the bowthruster design perform? I Like it and would be tempted to try something similar on a futur build if your's performs well. Once againe good job and nice build video!

@MMalinaPL 7 месяцев назад

Thank you! So there is no so much power, but with weak wind thrust is useful. Anyway before I put it in to the model I made few experiments with different versions and it works good enough for me. I believe that more rpms could generate much more thrust, but I didn't check it.

@bernarddostie8892 6 месяцев назад

@@MMalinaPL thanks for your answer. I'd like to try something similar soon. By the way, I like the way you assembled your boat. I should use some silicone on my builds too. Have fun with your next project and thanks for sharing them.

@skupper672 5 месяцев назад

Making progress! Question- Do you think the rudder size is sufficient? Contemplating a 10-20% increase for better maneuverability

@MMalinaPL 5 месяцев назад

In my opinion, it's ok. The first time I tried it, I used a 3-blade 40 propeller and I was not satisfied. I changed to 4 Blade 50 and it was much better.

@skupper672 5 месяцев назад

how much clearance did you have between the blade and the hull?@@MMalinaPL

@MMalinaPL 5 месяцев назад

So if you want to redesign much better will be to use step files instead of stl. Just now I'm quite busy with other project. Maybe some day I will start with tanker vessel but just now I working with crane ship. As my experience shows, ussualy it's easier to make new hull than redesign other. But it's just my opinion.

@skupper672 5 месяцев назад

Thank you for your insight! Appreciate your response. I have finished printing out the Hall today, and I am in the process of getting it ready for assembly. I have all the parts on hand I will not be programming the receiver like you did, but rather a premade radio unit. I think it’ll work the same. Looking forward to your new designs!

@MMalinaPL 5 месяцев назад

@@skupper672 Thank you too ! I would be grateful if you post a make when vessel will be ready.

@skupper672 5 месяцев назад

For sure! I just finished connecting the hull sections and I am amazed by the engineering of this model!! Can’t thank you enough! Question what program did you use to design it?

@MMalinaPL 5 месяцев назад

Fusion360 @@skupper672

@skupper672 5 месяцев назад

Hi there!- I started printing! Question- What filament did you print with? PLA?

@MMalinaPL 5 месяцев назад

I've made with pla, but remember that pla is very sensitive for heat. Even sunnny day on shelve can cause deformation. In that point PetG would be better.

@skupper672 5 месяцев назад

Thanks. Ive heard the same. I have started with PLA “tough” filament and intend to epoxy coat and paint the hull. I may use PTEG for the topsides. On another note, after i build this I would like to utilize the same hull (because its genius) and convert the topsides and superstructure to a tanker. Only the stern hull section will need to be redesigned for a singled propeller. Deck needs piping and manifold and the superstructure made small and moved aft. Dont know how to do this but will try to figure it out…. (If you want to attempt to design that for me maybe we can talk about hiring you to design what i am looking for?) @@MMalinaPL

@andreybelozerov4192 5 месяцев назад

can you tell pls which Filament you use

@MMalinaPL 5 месяцев назад

I used PLA, but remember that PLA is not heat resistant, so even on a sunny day it may deform.

@skupper672 6 месяцев назад

Amazing model. Cannot wait to make it however i cannot download the manual .pdf file. Can you assist?

@MMalinaPL 6 месяцев назад

There is package .rar to download in both links. If you unzip, there is manual.pdf file.

@skupper672 6 месяцев назад

Found it thank you! @@MMalinaPL

@skupper672 6 месяцев назад

I am keen to get this started but I know nothing about arduio. Is there an off the shelf system that you recommend for this model? I dont want to lose any functionality. Thanks for your work on this model.

@MMalinaPL 6 месяцев назад

@@skupper672 I'm Sure there is other way, but i found myself arduino easiest and to be honest I do not know other way . Anyway, With this arduino motor shield circuit is really easy. Uploading code to arduino is very easy as well. There is plenty of guides on youtube, even in my video with "black pike" Open sketch wit arduinio ide--> upload sketch to arduino--> put motor shield on arduino---> connect motors and receiver ---> power up---> configure transmitter as I show in manual. Thats all. But of course you can look for other solution, but just now I don't know how to help.

@skupper672 6 месяцев назад

Hello Friend - I can only find 1 STL (stern section) on thing verse and only one section in the rar when I extracted it. Is the rest of the ship located somewhere else? @@MMalinaPL