Big Block Engine Mounts Restoration with the Vevor 40 Gallon Sandblasting Cabinet 

If you change around the sand feed like I did in my video you will be much happier with it. Over time it will start working poorer and poorer until you just want to throw it out on the road! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OhlKMkj9QsQ.html

That's what I like about Harbor Freight and these other Chinese vendors. They make it possible to buy things that we couldn't have afforded before.

We have a blast cabinet at the shop from harbor freight and had to set up a vac system to it and that was a mess after a bit do to leaks and sand in the room so we did a pressurized exhaust to the outside of the building and that worked best. Our cabinet is the biggest one they sell and another lesson here is never blast anything without grease and chunks off it or you contaminate the sand and it plugs up the nozzle. So after all the farting around we went to acid dip on metal parts and use this on intakes and other aluminum parts only. For me it was to many labor hours when you can dip it and walk away and next morning wash it and paint it. Handy tool for intakes or little quick jobs for the weekender. For us it's about time and dust contamination to the shop and we can't have dust in motors or going into the paint booth lol. 😢

Nice!👍😎

Looks like something that would come in handy . Probably find lots of jobs that could handle .

Nice Glass bead cabinet Joe. Good fair honest review for Vevor. The fit and finish looks great. Just need to make a reclaimer on it and your in business. 👍

Yup .....upgrades to for the projects...good stuff...hope you use a mask...thanks Joe 👍🔧

If you put a tee in the air line you can put an air gun in the cabinet to blow the media out of the corners back down into the hopper.

Cool, now I know where to send my stuff that needs blastin’!! Dart Sport!!

Better than scraping all day long . 👍🏻🇦🇺.

Good tool

Exceedingly useful tool. I've often wanted one over the years. Now I'm too old to need one...lol😅. Anyway great addition to your shop.

Pretty decent little outfit Vevor has got a lot of products ,good video Joe 👍 👍 👍 👍

The gun tip may ware out and you can get a ceramic 1 at many tool supply stores.

Looks like a pretty nice little set up.

Alrighty😊

Important thing to note: almost every single thing vevor is just a rebrand from a mass manufacturer. Like different paint colors and labels. I've done a LOT of research into machinery and tools this last year and always end up that the vevor catalog is the same as the other chinese vendors. Additionally, I have noticed that the quality of the finished product is directly linked to the brands name. Vevor rides right in the middle, Bestequip is towards the bottom, and HiTorque/Grizzly the top... and all the other little unknown names are the bottom of the barrel. Secondly and probably the most important is that these are ALL knockoffs of *QUALITY* brands like Wen, Sieg, etc. Some of the name brands have even started selling out to the chinese manufacturers for their mainline products to be made cheaper on the condition that the chinese get to make said knockoffs... Eastwood/Dewalt for example.

Just ordered the same cabinet from Vevor. I’m planning to have gravity feed instead of the pickup tube. Thanks for making this video 👍🏻 any chance you could measure the hole in the bottom of the cabinet? Sincerely TJ Norway 🇳🇴

What’s the air compressor requirement to run it?

👍👍👍

Nice tool to have, but they need a big air compressor

Blast off

My glass beads make a lot more dust than that.

China...