Big ol’ Squarebody Roof Rack from Baseline Overland - Oregon BDR Prep

Подписаться 15 тыс.

Просмотров 4,9 тыс.

50% 1

I'm doing more prep for the 2023 @Powerstop Brakes Trail, and this time it's all about getting heavy duty storage from an actual roof rack that's made for work. That's where Baseline Overland comes in, and man am I glad I didn't have to fabricate this from scratch. They make a great piece of gear.
baselineoverland.com/products...
00:00 Introduction
00:52 Hey Y'all
01:39 First Look - Baseline Overland Roof Rack
04:04 Rust Prevention with Seymour Paint
05:47 Installing the Baseline Overland Roof Rack
10:28 What a great piece of gear
Hope y'all enjoy,
David
SHIRTS AND HATS!
www.willometmotorandfab.com/
AFFILIATE LINKS!:
Seymour Paint: www.seymourpaint.com?ref=1759
Miller Welders: www.millerwelds.com/equipment...
Offroad Design: www.offroaddesign.com/willome...
AMAZON GEAR!
www.amazon.com/shop/willomet_...
THE SOCIALS!
Instagram: / willomet_motor_and_fab
Facebook: / willomet
The legal stuff:
This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
This video is for entertainment purposes only. Willomet Motor & Fabrication, LLC makes no warranties as to the fitness for purpose or use of any of the tools and techniques depicted and assumes no liability or responsibility for property damage or bodily injury incurred from viewers attempting to use any information contained in this video. Use this information at your own risk.

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@SamwiseOutdoors Год назад

Big ol' dangum roof rack, man. Boomhaur noises, man.

@WillometMotorFab Год назад

Yep, umm hmm.

@photog1529 4 месяца назад

I wish I knew about Baseline earlier. I have a 1995 4WD Suburban and built my own rack last year. I kept it to 8 feet long since I wanted to use the factory roof mount locations. My roof slopes at 10-11 degrees at the side edges, which took some designing to get around. All in all I'm happy with it, but having the additional two feet would have been nice. All told, the aluminum rails and 80/20 slats cost me about $450, not including my time. Thankfully, I had access to a Bridgeport mill for the drilling and slotting.

@Cucvfreek Год назад

Great video!

@WillometMotorFab Год назад

Thanks man. Glad you enjoyed it.

@Powerstop Год назад

What an important upgrade for the trip (and many to come!), where else would we have put the rug on the #ORBDR?

@WillometMotorFab Год назад

When you live in a two room -apartment- tent, you've got to have a run in the foyer!

@CatRacer1A2A Год назад

Ohh man. I think my Burb is gonna need this rack!!

@WillometMotorFab Год назад

It’s seriously changed the way I think about gear storage.

@scottseibel7430 Год назад

That reminds me of a roof rack that I built for a 170 ext Sprinter van the roof rack was over 16 ft long.🤘

@WillometMotorFab Год назад

That’s a big un’!

@anthonyraines5951 Год назад

I always do a test nutsert now... i went in blind while putting my very first one ever in a friend's roof (also for a rack) and i didnt know how much pressure to put on it. I ended up breaking the attachment for the M8 Bolt off in the nutsert and had to drill the whole thing out. 1/10 would not reccomend Also idk if it is necessary or even advisable but i was so worried about water getting in so i ran a small bead of silicon around the lip of the nutsert before insertion.

@WillometMotorFab Год назад

Smart move on the test. I think a dab of silicone is super-sensible, too. This rack had gaskets, but better to double up a seal for real water-tightness.

@baseline.overland Год назад

⁠⁠Thanks for sharing, and great job! Quality videos are no easy task!

@WillometMotorFab Год назад

Yeah man. Now we need to find a reason to be in the same neck of the woods and go camping.

@baseline.overland Год назад

@@WillometMotorFab Let's make it happen!

@dble5896 Год назад

Been waiting awhile to see this kind of video on this roof rack. Thank you for the quick content and review. Hopefully getting one for my burb sometime soon.

@WillometMotorFab Год назад

Glad it was helpful! Yeah, Peter has a lot of designs, and it's easier to find trucks with them. I'd definitely rate this favorably among stuff I've bought and installed.

@dble5896 Год назад

@@WillometMotorFab does it give off a lot of wind noises or just the typical square body chevy noises?

@WillometMotorFab Год назад

If it’s noisier, I can’t tell. The diesel and 40s have that part covered.

@joshuaatkins5197 7 месяцев назад

This is a really nice rack but they're a little too proud for my pocket. Nice choice in aluminum. I've been looking and all the mounting systems seem to be under par. I'm hoping to find a rack that has a interior plate for each mount also so the roof is sandwiched between two plates instead of the bolt holes through sheet metal. Fyi my Suburban roof is only one layer not two. 91 square.

@WillometMotorFab 7 месяцев назад

It is a spendy piece, but pretty good value for what you get. An interior plate would be a great add.

@joshuaatkins5197 7 месяцев назад

@@WillometMotorFab Agreed. It's one of the best looking full roof racks I've ever seen. I guess I could go look it up, but what's a ballpark cost for it?

@WillometMotorFab 7 месяцев назад

@@joshuaatkins5197 better to check their site. Material prices might have changed since I installed it.

@chrisbigbendgarage634 Год назад

I've been contemplating putting my spare on a roof rack on my suburban and have debated building my own or buying this one looks awesome thanks for the insight

@WillometMotorFab Год назад

Dude, I was going down the same mental road. I can tell you this is better (and lighter) than what I had planned, and candidly, I'm glad I pushed the Easy Button on this one.

@Marcus_Woodard Год назад

Masking tape or painters tape on the drill bit helps limit over travel. Wrap 3 or 4 layers leaving about 1/4” of drill bit showing. Depending on application of course. Also, take a look at plus nuts. If there is room behind a panel they tend to work a bit better and not spin over time.

@WillometMotorFab Год назад

Great ideas man. Thanks for sharing that.

@michael-michaelmotorcycle Год назад

Plus nuts? Never heard of them. Though my ex was crazy, plus nuts, x2.

@kylewest100 Год назад

I will be ordering one at some point. It looks great. What I’d like to see is if it’s possible to mount solar panels to it and they be below the frame so you can’t see them unless your above looking down. I don’t ever plan on having a roof top tent but I do plan on having a substantial house battery setup so I can run a battery powered AC and other power hungry items.

@WillometMotorFab Год назад

I totally think you could. The extruded bars move broadly in their slots, they have slots on all sides, and I bet a panel or two would fit nicely between them. That's a really good idea on the big house battery. What sort of adventures do you have planned?

@kylewest100 Год назад

@@WillometMotorFab I’m looking to do week long trips in the future. I need the AC because here in the south it’s impossible to sleep in a vehicle in the middle of the summer. I also have sleep apnea and if I’m bring the family which are all girls I’ve got to make many amenities to keep them happy. There’s some long trials in WV I want to do and eventually make it to Utah and do what I can there. My barn door will never be to the level yours is but I do have a 14bolt for the rear and I might upgrade the front one day. I’ve got a standard 6 inch lift I’m going to install this fall. I’m going to get the ORD springs but in stages. I still need bumpers and a winch. I’ve only had the truck for a yr so it’s a work in progress. I’m still in the process of adding tools to do the things I need. Thanks to guys like you and baseline the tools I need to I have to buy keep shrinking. I’m down to just needing a decent hobby welder so I can install my future axles and frame reinforcements. It’s gonna be more cost effective just to buy the bumpers and roof rack.

@baseline.overland Год назад

Take a look at cascadia 4x4. They make a thin, heavy duty solar panel that resists scratching so it is purpose built to install on this type of extruded cross bar and even stack things on if needed.

@adventuregarageworks498 3 месяца назад

Now that you've had the roof rack on for awhile, have you seen any water intrusion at the nutserts? or have the gaskets that it came with been enough to keep water out? Ill be installing one on my K5 and I'm curious of real world experience with the rack.

@WillometMotorFab 3 месяца назад

Zero water. I’m about to take the truck apart, so I’ll know for darned sure here soon.