Be extremely careful with deionised water, it’s AKA hungry water, as the ion is removed, its more corrosive than standard tap water, when using with Bigoi pressure washer you should be flushing with tap water after using it with deionised water, and avoid letting it sit in there after use. Possibly why the zinc plated pressure hose fitting are starting to corrode. Great Video
Makes sense. Bigboi is Australian. I’m guessing you are local to Kranzle. The freight to ship these heavy things anywhere is nearly as much as the units.
Thanks for the support.love the video💪👌. Quick tip you need to replace the red cap as that's just a transport cap. The black cap will provide ventilation and release Pressure. Otherwise it can overload the circuit board.
If I buy one today it will no longer have the ignition problem? Since I am from Mexico and waiting for them to send the response I think it will be long!!
I have the bigboi blower and you don't need a towel after you use it to dry the car it has a tonne of power👍 The only issue I have with it should really be the 6mtr hose it should ship with or there should be a choice when buying it either 3mtr or 6mtr. other than that it is quality.
Hey mate, can you confirm if your pump runs for a few seconds after the trigger is released? Mine seems to continue to run for 5-10 seconds but cant work out if this is normal. Other youtube videos seem to show that the pump stops instantly after releasing the trigger
I ordered the washr duo and was looking at the d ionizer also. Just wondering how long the cartridges would last my water is pretty hard at around 300ppm. Sent bigboi a couple emails with a couple questions but they don't respond.
I am so excited to get mine here in the US. I've gone through so many different pressure washers and they've all been so noisy (unit wise). I plan to do a full review on my channel (ajpgarage) as soon as it comes in! Excellent review of the BigBoi D-Ionizer and WashR Pro. Subscribed to your channel based on this video alone!
One of the few videos that show the performance of this machine (with 220v). Great video. If you ever consider posting another video could you maybe include the 40 degree white nozzle as well? Really interested in seeing how fast it removes the soap from the car with that spread. Also perhaps a water flow test (in a bucket) to check, if it hits the 9.2 ltr/min mark.
It looks like the water filter has a bypass option that allows you to only connect the hose to the filter and either filter it or bypass the filter. If it has that option It'd be a great value... Fantastic video. Could you link the two products you used? It lloks great!
@@stevechrysanthou1703I have a deionizer with a bypass valve. So it's hooked up all the time. I turn mine on for the final rinse, and it runs at full pressure. I know some people use it during the foaming process, and also the final rinse. It does not remove iron particles from the vehicle. You will need to spray an iron remover for the hat. What it does is purify the water you're using, so it won't leave water spots or deposits on the vehicle.
Awesome video mate. Quick question, what is the dilution ratio fot the Aquaseal pro? Ive been using 40mls per 1000ml. But i noticed in your bottle its much less.
@testandtune6096 Did you remove the cartridge location pins? Because in the instructions it advised that if you have a high flow pressure washer, that you remove them.
Hey Mate, love the video. What is the foam cannon you use for the aqua seal pro? it looks different to the other one for the soap. Also are you watering down the product in the foam cannons or is it pure soap/aqua pro? Also subscribed to your channel :)
Hi mate, may i just ask what hose do you have. Im wanting to get the 20m 3/8 from bigboi but i couldnt find a comparisson review vs flexzilla or uberflex. Also, how many wash/rinse does the dionzr do before replacing the cartridge?
This is the hose that came with my kit. It’s only 7m long. However just enough to reach around the car if you have the washer at the front. It’s supposed to do around 80 washes, but will depend on the water quality going in. Don’t tell big boi but I found some resin refills on AliExpress which will suit these cartridges. So that will make it pretty cheap to refresh the resin filter when the time comes. Find the resin supply was my reason for buying this, it’s a much nicer kit than anything I could put together as a diy filter.
Correct. Trolley is on the site. The twin filter one is heavy. By the time it’s got water in it, it’s really heavy. But I plan to wall mount this eventually.
If you dont wall mount it, trust me you need the wheel base they seel on the site. I got today the 3 stage one and its very heavy! And i dont use water for the moment. Is a must buy.
Pro tip you shouldn't rinse the car before foaming as your pushing off the dirt without and lubrication. Snow first let it lubricate and emulsify the dirt and then rinse. ☺️
There’s definitely merit to that method. But when I do that, I then need to foam again, before the mitt action. My concern is larger partials still being in the foam and the mitt then pushing them in the paint.
@@testandtune6096 less chance of that happening if you use a good snow foam that actually cleans like touchless from BH or active foam from Koch Chemie. Trust me I've been doing the foam first rinse the hand wash on mine and customers cars and never had an issue with scratches. 👍🏾
I always snow, rinse, 2 bucket hand wash, rinse. Not a lover of hand washing the snow foam, concerned there's too much dirt on the car. I'm not saying it's wrong, just not for me. I'm impressed with the washer set up.
@@tonyjoe5707 if you use the right snow foam it's been tested and proved that you can foam then rinse and then use 1 bucket wash and not scratch the paint at all. Just make sure you use a snow foam that actually cleans.