Тёмный

BITX-40 TX Audio Response Tests (#58) 

David Casler Ask Dave
Подписаться 129 тыс.
Просмотров 5 тыс.
50% 1

Using the function (signal) generator put together in episode #57, we test the transmit audio response of the BITX-40 to discover that rolloff occurs around 2 kHz. Watch to see how it all works! Subscribe: / @davecasler Ask Dave Playlist: goo.gl/inaQeB. Tip Jar: ke0og.net/tip-jar
To learn more about me, visit: www.dcasler.com/about/
Tip jar (on my website): www.dcasler.com/tip-jar/ (provides a method to use your credit card via PayPal, Also describes Patreon)
To pose an Ask Dave question: www.dcasler.com/ask-dave/ or www.ke0og.net/ask-dave/
To order the old Technician videos on DVD: dcasler.com/how-to-buy-technic...
To order the most recent and up-to-date Amateur Extra videos on a thumb drive: dcasler.com/aevids-on-stick/
Music is "Sour Tennessee Red," by John Deley and the 41 Players, courtesy RU-vid Music Library.
Technician training videos, see www.ke0og.net/training/
General training videos, see www.ke0og.net/general/
Amateur Extra training videos, see www.ke0og.net/extra/
List of the Ask Dave videos, see dcasler.com/ask-dave/#askdavelist
My primary website: www.dcasler.com
The ham radio part of my website (direct link): www.ke0og.net
My publishing website: www.mtsneffelspress.com, where you can find my fantasy and science fiction books, as well as some local history books I publish for the Ridgway Railroad Museum and the Ouray County Historical Society
My Amazon author page, which lists my print and Kindle books: www.amazon.com/-/e/B00471I0Q4.
And I'm now reading (producing) audiobooks! See my first effort here: goo.gl/0GTHsW
I'm often asked what equipment I use to create the videos. The devices include the Panasonic DMC-G7 camera, Panasonic HDC-TM90 video camera, Tascam DR-05 audio recorder, Audio-Technica ATR-3350 lapel microphone, Sony Cyber-shot DSC-W560 digital camera, the Kodak Zi-8 video camera, my iPhone 5S, and Pentax K100D DSLR. Software used: CyberLink PowerDirector 13 on a Toshiba S55-A5294, also using Smoothdraw 4.0.5.0, FastStone Image Viewer 5.3, FastStone Capture 8.0, Audacity 2.1.1, LibreOffice 5.0.4.2, and Ink2Go 1.7.2. You can see how my studio is set up by viewing • Tips for Making Instru... .
Twitter: @dcasler

Наука

Опубликовано:

 

16 апр 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@MadDawg91108
@MadDawg91108 7 лет назад
Thanks for another great video. Great to see videos showing that one does not need expensive equipment to do testing. I'm also looking forward to the P-Loop video after the snow melts.
@davecasler
@davecasler 7 лет назад
I tried using it today on the back porch. It receives very well, but so far I haven't had a QSO with it.
@HaleiwaSam
@HaleiwaSam 7 лет назад
Thanks Dave, I just received my Bitx-40 today and look forward to putting it together. but first going to review both yours and Randy's videos on it. Mahalo for all your informative videos and I enjoy seeing you on W5kub's shows. 73 and Aloha!
@bobclarie
@bobclarie 7 лет назад
Thanks Dave, we appreciate your very informative productions. Got my BITX-40 a few weeks ago, and waiting for "spark" to start assembling. '73 Bob N7ISU
@jimawhitaker
@jimawhitaker 7 лет назад
I like your videos Dave because you don't assume the viewer knows nothing and also isn't an engineer Nice balance... tnx
@davecasler
@davecasler 7 лет назад
Thank you!
@WA8QFE
@WA8QFE 6 лет назад
You may look at the carrier oscillator frequency. VK3YE had the same problem and has a video on it. Lee, WA8QFE
@mikeab1yk911
@mikeab1yk911 7 лет назад
Did you notice the peak at the carrier? I would adjust the BFO.
@bobclarie
@bobclarie 7 лет назад
P.S. I'm most interested in the MFJ loop. I'm using a Pixel receive only loop here. I use an attic dipole for transmit. I can't use the attic dipole for receive because the noise is a constant S 9. The Pixel loop allows me to hear, but the sensitivity is way down. Looking forward to your reports on the MFJ loop. '73 Bob N7ISU
@jeromegrzelak8236
@jeromegrzelak8236 7 лет назад
yes timothy mc the vk3ye 27 pf mod is the way to go remove a cap and install another dave when will u mod yours kg6mn
@tamccain
@tamccain 7 лет назад
VK3YE made a modification to make the audio more "punchy" by moving the carrier. This was done in the "pre" arduino version, but the modification might be the same. You might check out his videos.
@davecasler
@davecasler 7 лет назад
Can you give me a leg up by sending me a specific link? I'd appreciate that.
@mikeab1yk911
@mikeab1yk911 7 лет назад
Replacing the L5 jumper with an actual inductor will also lower the BFO. The Arduino is only used for the SI5351 VFO and LCD etc.
@ThumperKJFK
@ThumperKJFK 7 лет назад
Thank you for the demo test. great videos you have been making. One note. Can you please turn off the Auto Focus on the cam. It hurts the eyes as it is trying to focus when you move your arm or turn in the chair. Other than that. Big Thumbs up, give me a few day's to toss a few things in the Jar. :D 2HS464
@davecasler
@davecasler 7 лет назад
+Gregory Spivey yes, it was pretty bad. I haven't seen it that bad before.
@raykiii
@raykiii 7 лет назад
Did you isolate the problem with the BITX or is it not worth digging into?
@davecasler
@davecasler 7 лет назад
I didn't dig in much. It's a very inexpensive microphone that's not in any housing. People tell me on the air it's quite intelligible, but my recordings sound awful! It seems good enough for purpose.
@raykiii
@raykiii 7 лет назад
Have you thought of maybe replacing it with a old reel to reel mic or even a cassette recorder hand mic or even a MFJ mic?
@Michael-lo3ht
@Michael-lo3ht 6 лет назад
I just received my Bitx in the mail the other day. As soon as I saw the mic I'm thinking of getting a connector to allow me to plug in my Mic I have for my Kenwood into it. I'd be anxious if someone else did something similar. That way you're using the same kind of mic for the comparison.
@jeromegrzelak8236
@jeromegrzelak8236 6 лет назад
THE 27 pf vk3ye did it for me kg6mn
@davecasler
@davecasler 6 лет назад
Thanks for the tip
@thestingyham1188
@thestingyham1188 7 лет назад
Dave, every time I watch one of your videos, I am quite disappointed by the fact that you are not my neighbor. Sure would be fun to have you live in my neighborhood! HL1ZIX/KE0EYJ
Далее
K7AGE BITX40 On The Air
7:22
Просмотров 16 тыс.
SWR Demystified: AD#28
30:23
Просмотров 118 тыс.
다리에 힘이 풀려버린 슈슈 (NG Ver.)
00:11
Просмотров 2,4 млн
skibidi toilet multiverse 039 (part 2)
08:58
Просмотров 5 млн
QRP-Labs Ultimate3S WSPR Kit Assembly and Review (#68)
33:34
Assembling the BITX-40: KE0OG Kwickie: #48
16:15
Просмотров 13 тыс.
Solar Power for your Ham Station AD #52
26:25
Просмотров 51 тыс.
The Coolest Radio You've Probably Never Heard Of
11:54
Review of BITX-40 SSB QRP Rig Operations: #49
9:43
Просмотров 11 тыс.
BITX 40 Module Arrives at SolderSmoke HQ
5:13
Просмотров 14 тыс.
Review: Low cost Bitx40 7 MHz SSB transceiver module
9:42