Blade - 230S - BNF Heli - Radio Setup & Flight

Подписаться 139 тыс.

Просмотров 35 тыс.

50% 1

bprc.me/230S
bprc.me/3S_850
bprc.me/NX8
bprc.me/Blade2...
bprc.me/1S_150
bprc.me/IC2_Ba...
Help Us
www.BrianPhill...
bprc.me/Patreon
bprc.me/PayPal - brianphillipsrc@gmail.com
bprc.me/Horizo...
bprc.me/TowerH...
bprc.me/ArrowsRC
bprc.me/BitgoH...
bprc.me/FMS
bprc.me/AMainH...
bprc.me/Banggood
bprc.me/Amazon
bprc.me/BuddyRC
bprc.me/Redcat
bprc.me/RTLFas...
bprc.me/RCHackers
bprc.me/RCGoing
bprc.me/FairRC
bprc.me/Titan
bprc.me/EBike
bprc.me/Furniture
bprc.me/Clothing
bprc.me/Solar
TX & RX
bprc.me/Tx
bprc.me/Rx
bprc.me/AR631
bprc.me/AR637T
bprc.me/AR8360T
bprc.me/LemonRX | amzn.to/34Zehs9
bprc.me/A3LRX | amzn.to/3yX2Mww
SMART
bprc.me/SmartC...
bprc.me/SmartB...
GLUE | CA | KICKER | FOAM2FOAM | SUPPLIES
www.brianphill...
bprc.me/FMS_Glue
bprc.me/Voltag...
bprc.me/Servo
bprc.me/Forceps
bprc.me/LED_Kit
bprc.me/Iron
bprc.me/Mics
HORIZON
bprc.me/RealFl...
bprc.me/PlaneS...
bprc.me/150FX
bprc.me/150S
bprc.me/230S
bprc.me/330S
bprc.me/Fusion360
bprc.me/InFusi...
bprc.me/A10
bprc.me/AeroScout
bprc.me/AirTra...
bprc.me/Appren...
bprc.me/Beechc...
bprc.me/Carbon...
bprc.me/CZ_Ces...
bprc.me/CZ_Cub
bprc.me/Cherokee
bprc.me/Cirrus...
bprc.me/Citati...
bprc.me/Commander
bprc.me/Conscendo
bprc.me/Draco
bprc.me/Duet
bprc.me/EC1500
bprc.me/Eratix
bprc.me/Extra300
bprc.me/F14
bprc.me/F15
bprc.me/F16
bprc.me/F18
bprc.me/F4U_Co...
bprc.me/Fw190
bprc.me/Habu
bprc.me/Maule
bprc.me/Opterra
bprc.me/P39
bprc.me/P47
bprc.me/P51
bprc.me/PT19
bprc.me/Pitts
bprc.me/Radian
bprc.me/RV7
bprc.me/SportCub
bprc.me/SU30
bprc.me/T28
bprc.me/Timber
bprc.me/TwinOtter
bprc.me/Ultima...
bprc.me/UltraS...
bprc.me/Ultrix
bprc.me/V900
bprc.me/V1200
bprc.me/Valiant
bprc.me/Vapor
bprc.me/Viper
FMS
bprc.me/FMS_A10
bprc.me/FMS_ASW17 | bprc.me/HH_FMS...
bprc.me/FMS_BA...
bprc.me/FMS_Be... | bprc.me/HH_FMS...
bprc.me/FMS_Ea...
bprc.me/FMS_F15
bprc.me/FMS_F4... | bprc.me/HH_FMS...
bprc.me/FMS_Flash
bprc.me/FMS_Fox | bprc.me/HH_FMS...
bprc.me/FMS_Fu...
bprc.me/FMS_Maule
bprc.me/FMS_Moa | bprc.me/HH_FMS...
bprc.me/FMS_P39
bprc.me/FMS_P40
bprc.me/FMS_P47
bprc.me/FMS_P51
bprc.me/FMS_PA18
bprc.me/FMS_PC... | bprc.me/HH_FMS...
bprc.me/FMS_Pitts | bprc.me/Pitts
bprc.me/FMS_Ra... | bprc.me/HH_FMS...
bprc.me/FMS_Ra... | bprc.me/HH_FMS...
bprc.me/FMS_Sk... | bprc.me/HH_FMS...
bprc.me/FMS_SU...
bprc.me/FMS_T28
bprc.me/FMS_Viper
bprc.me/FMS_Ya... | bprc.me/HH_FMS...
bprc.me/FMS_Zero
TOWER
bprc.me/TH_ASW28
OMP
bprc.me/OMP_Bu...
bprc.me/OMP_Ch...
ARROWS | HOBBY ZONE www.brianphill...
DANCING WINGS | DYNAM | XFLY www.brianphill...
E110 bit.ly/3yVniit
E120 bit.ly/3OOmlOi
E150 bit.ly/3vHM7Le
E160 bit.ly/2DXmEGU
E180 bit.ly/30RKwE8
E200 bit.ly/3RemwEd
K123 amzn.to/2EerkpG | bit.ly/3PKg5r6
K124 amzn.to/3bqGF9F | bit.ly/34BaZXP
FW200 bit.ly/3LVXu9Q
VTOL amzn.to/2zwNvaV | bit.ly/2TTq4Qn
ASW28 amzn.to/3A8D5bS | bit.ly/2VlLtBm
Phoenix Evo amzn.to/3nX4okg
Spitfire bit.ly/3smaEWE
BF109 bit.ly/3rlrUen
T28 bit.ly/3398xse
F4U bit.ly/3h3OhNI
P40 bit.ly/3OTlUSK
P47 bit.ly/30hZiqN
P51 bit.ly/2JQDtDj
F22 bit.ly/39Zvf6r
F16 bit.ly/2YTmTKg
F16 50mm bit.ly/3Kga0Av
F18 50mm bit.ly/3mm9xSY
#rc #helicopter #blade

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 182

@paladin1066 4 месяца назад

Thanks Brian, followed step by step, brilliant video and much easier to follow than the manual.

@BrianPhillipsRC 4 месяца назад

You're welcome!

@appgamer3106 Год назад

Hello Brian, thank you so much for doing this video. I have been trying to do the programming for the 230s for 2 days and it was driving me crazy. I’m an airplane guy like yourself and not familiar at all with heli setups. If it had not been for your video, I would have never been able to get through the programming/ setup for this heli, it was about to put me in the nut house! I’m using a slightly different transmitter, the dx8e but it seems to have worked correctly. Your video is the only out that was easy to follow and made any sense. Great job and thanks again. You are a huge help to rc enthusiasts, thanks for taking the time to produce these instructional videos.

@BrianPhillipsRC Год назад

AWESOME!!!! Wait till you see our just filmed M4 (heli) video - OMG, it was soooooo hard to setup, but it is SOOOOOOOOOOOOO dang beautiful, and amazing in the air, and after setting it up, I'm felling way more capable...so I need to quick, do about 5 more heli's so I can remember at least 5% of it - LOL ;)

@nsbob70 4 месяца назад

35:20 or so.. I like all my switches away. I switch my throttle hold on all of them so the switch is away in hold mode. Just my preference. I got my RTF 230 S the other day, and I will want to eventually switch it over to my NX-8, so pinning this page! Thanks once again Brian. ;)

@markjannakos503 3 года назад

I have been watching your videos for a while now. I just wanted to say that you and your camera crew, have been a great help to me ..thank you

@BrianPhillipsRC 3 года назад

Thanks Mark!

@yakacm 4 месяца назад

The word spazz comes to mind for some reason when watching Brian.

@j.r.7539 3 года назад

Got one myself and it is awesome to fly. Learning the basics now and cannot wait to do a few 3d moves later. RU-vid can have a lot of settings on your radio to make use of the telemetry for alarms, etc. 8min flight time no problem. Well done HorizonHobby

@BrianPhillipsRC 3 года назад

Flight times are a thing of the past when they give us pack voltage and cell by cell voltage - that is so nice!!! I want it on every plane ;)

@gtm624 3 года назад

Omg dude your killing me. Going back 20 years. Omg. I’m just getting back Into rc after 20 years. Now all flying. Walking into a hobby shop after 20 years was shell shock. The rc10gt red and white ready to run was my baby. I have only parts now. Crashed and blew up engine twisted frame. 27mhz lol. I have been trying to find one in mint condition.

@BrianPhillipsRC 3 года назад

Nice - so back in the day where you had to add a SPEED CONTROLLER to go backward - I had an RC10 too ;)

@gravityfuzz 3 года назад

Thanks Brian and crew. The cat humor is so loved. I had to go look up Enrique's event as I had not seen it. Wow. Thx. What's fun is flying your heli like a plane Brian. It's a blast to rip a heli a high speed and make some curvy turns. The chopping sounds are loved. Hovering, inverted and the technical stuff will come as you need it. But flying helis fast is a unique experience and not so different from flying a plane. The ailerons/roll come more into play without going inverted in the high speed turns. And you still have complete yaw authority which a plane cannot dream of. One more thing: hover a bit higher so you can practice your inverted maneuvers. Keep it up. Fly it all pilot extraordinaire. . .

@BrianPhillipsRC 3 года назад

Yeah, I know - chopped up and still does a show - Enrique is a hero - LOL ;) I agree about the heli's having more capabilities than plane, which is why I find them so intimidating ;) Thanks for the encouragement!

@gravityfuzz 3 года назад

@@BrianPhillipsRC They do have a lot more capabilities it's true. It's that in forward flight your airplane instincts will kick in and you'll feel the flow of a heli whereas a hover can not deliver.

@philou961 3 года назад

Hi brian for the swash plate you can't trim on transmitter because when you do that you lose the trim when the battery is changed. Blade 150 and blade 230 flight settings are all done in the gyro. The gyro is the one doing all of the adjustments for trim and sub trim so the transmitter is always center. trim is for horn adjustments and sub trim is for drifting issue. You need to fly in calibration mode for it to save how much sub trim you need to keep it stable. If you have trim on transmitter when you plug battery in heli it thinks that is what center is on the transmitter so your gonna still have drifting issue (the gyro assume that their's no trim on the transmitter). It's kinda weird but once you understand how the gyro works it's easy to get that heli to fly very stable. Sorry for my English it's not my first language.

@BrianPhillipsRC 3 года назад

Thanks! I'll give that a try on my next go around!

@westhobbiesrc8051 3 года назад

Few things, one! Never used trims on a FBL heli, it will make it do some weird things. Two, put your modes on one switch. Meaning, normal is auto left bank angle limits, Idle two is just high head speed (around 70% use a flat throttle curve) Idle 2 100% throttle

@BrianPhillipsRC 3 года назад

That's what we did on there...I was incorrect in a few things I said - LOL (Weird, I know - LOL) I found that the DR/Expo was over on F and on B was Just like you said. I've been practicing and getting way more used to it, and loving it. In fact, we have another coming too, when they come back in stock...stay tuned for that one. Also, you mentioned a TRIM FLIGHT... I'm still a bit confused on how to do it. I'll do some more investigation to make sure I can adequately explain it in a future video.

@ror-ys3qp 2 года назад

@@BrianPhillipsRC add voice to your switches so you are reminded what the switch does.

@fredaw61 3 года назад

I have been teaching myself to fly Helicopters on the OMP M1 and M2. I found when I do safe mode (stability) I have the helicopter wanting to drift. I am strictly flying with stability off and finally getting the hang of hovering in all positions which is the biggest thing to master. Today I just started flying around more with the M2. I have been learning now for 3 months now.

@BrianPhillipsRC 3 года назад

NICE! Good for you Fred! Heli's are quite a challenge for me, but I too am getting the hang of this little beast now!

@tomatwalden 3 года назад

Drift is normal, all single rotors Helis do it due to physics. You can google “translating tendency” if you want to learn the reasons why! :)

@Stinkles_ 3 года назад

@@tomatwalden Yes! I never bother to trim RC helicopters, it’s a losing battle. As long as they’re not wildly out of CG I just fly them.

@tomatwalden 3 года назад

@@Stinkles_ It’s not about trim - it’s the physics of single rotor flight. Essentially the tail rotor is not only counteracting torque, but is always producing a side force. The heli will therefore drift, or has to lean using cyclic into the drift. This phenomenon is called Translating Tendency.

@Stinkles_ 3 года назад

@@tomatwalden Yes Tom, I agree with you about translating tendency. I’m saying that’s why I don’t try to trim the drift out of RC helis. Better to just use a little cyclic input to adjust for any translating tendency, or even wind, as opposed to trying to trim it into a hands-free hover. Part of the fun!

@eczeman2189 3 года назад

Can't wait for my Eachine e160 to arrive, bought a load of spares and a voltage alarm, It'll be my first 6 channel heli.

@BrianPhillipsRC 3 года назад

Nice! Good luck!!!

@jackson-honey 3 года назад

Awesome Video!!! I just got my BNF 230S after playing with the Nano for about a year. My 1st flight was about 30 seconds until I broke the rotor head. I didn't realize until watching this video that SAFE wasn't enabled. Can't wait to get my repair parts and try to get back into the air... Thank You for your content!!!!

@BrianPhillipsRC 3 года назад

Thanks for sharing! I was super freaked out when I realized AUTO-LEVEING wasn't turned on!!! Glad I got her down and fixed it prior to disaster ;)

@bikeislife8405 2 года назад

Literally me yesterday 🤣

@navypa4314 2 года назад

Hi Brian,I’m a long time follower,been flying since 1981,I needed a new challenge so,I got the blade Nano 3 and love it so much I stepped it up to this Heli,thank you so very much for the walk through,I’m not sure if you reply back on these old videos but thanks a million to the both of you!

@richiebricker 2 года назад

You had me at "Wanna see a cat get hit by a helicopter". A man of my own humor. Did ya ever notice good helo pilots are obsessed with telling people they are not a good pilot? If you can fly a helo without stabilization then you are a good pilot. It takes a lot of work to get there

@BrianPhillipsRC 2 года назад

I'm definitely NOT a good pilot then ;)

@coryzbazinga1640 2 года назад

Im new to helicopters, thank you so much for this tutorial, it was GREAT help, thanks Brian

@BrianPhillipsRC 2 года назад

Glad you enjoyed it. Wish I was a bit better with the terminology, but I love sharing this heli!!!

@billysanders4477 3 года назад

Looking good to me. I haven't been able to get mine up for any length of time yet. They are harder than you think. Thanks for a great video as usual.

@BrianPhillipsRC 3 года назад

They are harder than they look for sure. I had another commenter mention they thought they had missed turning SAFE ON, and I wonder if you're flying OUT of SAFE (accidentally???) - Is yours BNF or RTF? If it's BNF, make sure the SAFE is on in your "Normal" mode...then you'll have AUTO-LEVELING, which will help you get your feet under you.

@MrGirwin1123 2 года назад

Thanks for the video. I couldn't figure out why mine wouldn't go into stability mode. Thanks to your video I was able to go to forward programming and turn safe on. Problem solved.

@BrianPhillipsRC 2 года назад

Awesome - Glad we could help! This heli is great!

@Stinkles_ 3 года назад

Yes Brian, bigger helicopters!! You can do it! The Blade 360 Fusion looks like an awesome BNF, if you don’t want to build a kit. I’m a big fan of helis with belt or shaft-driven tail rotors with adjustable pitch. There’s a consistent locked in feel that is hard to achieve with a motorized tail.

@BrianPhillipsRC 3 года назад

Right on - we have another Heli coming, as soon as they're off backorder ;)

@mikebird8290 3 года назад

HI BRIAN AND CAMARA CREW. BEEN LOOKING FORWARD TO SEEING ANOTHER VIDEO OF THIS AMAZING HELICOPTER. THANKYOU 🇬🇧💂🇺🇸🗽♥️💯🕊️👍

@BrianPhillipsRC 3 года назад

More coming too Mike ;)

@jakelang4387 2 года назад

i just rebuilt my 230 blade for the 3rd time new esc and frame micro heli blade grips flys awsome

@BrianPhillipsRC 2 года назад

3X!!! Wow Amazing ;)

@davidrivero7943 3 года назад

Nice set up, Brian. Weve come a long way from the Ford Pintos of all Blades Helis, their Flybar SR . Fixed wing Pilot doing great @ rotating wings. After Flying XK beautiful Micros, you might need this. Diff., more stable Flying with more POWER.

@BrianPhillipsRC 3 года назад

Right on! The Blade 230S is the most impressive Heli I've ever had, and I love flying it. I finally have been doing to inverted flying, and we'll share that video real soon ;)

@friendlyreptile9931 Год назад

After finishing my VF-31 Tomcatters paintjob for the e-flite F-14, i will now go for this heli and turn it into a UH-1D :D

@BrianPhillipsRC Год назад

I've seen that kit, and it is SWEEEEEET, but three blade tail rotor GOTTA GO for scale looks, right???

@friendlyreptile9931 6 месяцев назад

@@BrianPhillipsRC Hi Brian, after i had my Blade 230S maiden 4 days ago, i started to build the kit. You talked about the "MicroHeli UH-1" kit, that is a complete mess with proportions and so on but i was talking about the "Heli Scale Quality UH-1" kit. You can find a video on yt if you copy this into the searchbar " Erstflug UH-1D 1:18 Heli Scale Quality Rumpf mit Blade 230S " It's not my video but there you can see how good looking this thing is. Just ignore the 1/18 in the video name, it's 1/24 scale

@timbacchus 3 года назад

Wonderful with safe. Love the sound of the blades just like a big chopper

@BrianPhillipsRC 3 года назад

I think it's so cool too!

@gtm624 3 года назад

I also LOVE the 🐈‍⬛. My cats don’t like any helis. My one neighbors cat is intrigued by my nano and will approach it if I land. Lol.

@BrianPhillipsRC 3 года назад

LOL - I think my some of our cats might be a little wacky...they also like to kinda jump out in front of us when we're riding up and down the driveway on our bikes and scooters - LOL!!!

@brianbrissette9444 3 года назад

230s, looks like fun, here we go

@BrianPhillipsRC 3 года назад

It sure is!

@duonesmith 3 года назад

I’ve crashed my Blade 230s 3 times and little damage. Replacing a few parts today. Always good thing to have spare parts. just checked and didn’t have safe activated. Thanks for the info Brian!! Now I should be able to fly it without crashing 💥.

@BrianPhillipsRC 3 года назад

Right on!!! Glad I'm not the only one who missed that MAJOR detail ;)

@gabormihaly667 10 месяцев назад

the cat one RC crazy 🤣🤣 king

@gtm624 3 года назад

Finally. After much searching. I found the answer to my question. Can safe be on with higher rpm and more aggressive pitch as opposed to the rtf that gives one of 3 flight modes in safe auto level. I ordered a bnf. Thank you 🙏🏻.

@BrianPhillipsRC 3 года назад

Safe can be turned on in any or all of the modes, from what I understand.

@gtm624 3 года назад

@@BrianPhillipsRC seems that’s what you demonstrated. Lol. I like to have it so I can rip around. But I also work on my right stick training with it off. That is with my nano s3. I’m only 29 min this vid. Great vid so far. I have it on my tv.

@petewatts30 3 года назад

I got a couple of fibreglass canopys from micro heli they're really nice.

@BrianPhillipsRC 3 года назад

Nice! I hear they make a good product

@jonathangleaton2608 Год назад

Like the video wish I could come over and fly with you keep doing the video 😊

@BrianPhillipsRC Год назад

We've had people come over and fly more than a few times ;)

@tughillrc6327 2 года назад

Thanks for this video , I am trying to fly this on real flight 9.5s and programmed my NX10 by the book and could not fly it with out crashing ! I hope your video corrects the issues,

@BrianPhillipsRC 2 года назад

I loath simulators for Heli's, but only because they only point out my need for more practice :)

@skeeter06b Год назад

Thanks!

@BrianPhillipsRC Год назад

Thanks so much Jay!!!!!

@genodesan4954 7 месяцев назад

Thank you for the awesome videos and information I've learned so much from watching. I just got the blade 230S smart version last week and want to do a trim flight for it. All of the videos on RU-vid show putting the left stick down and to the left and the right stick up and to the left and then hitting the panic button. Is that for the older v2 version only?My manual does not have that step involved so I'm not sure if horizon left it out as I heard they're known for that lol. I've tried contacting them with no luck and was wondering if you knew the correct procedure for the newest smart version. Thank you 😊

@jeff6251 3 года назад

When I bound mine the instructions said to turn it upside down for 15 seconds So does the current manual. Did you not have to do that? Did I miss something?

@BrianPhillipsRC 3 года назад

I never did that, but I didn't see it in the manual either...not that I was reading the whole thing...I was just looking at the BNF Setup chart.

@jeff6251 3 года назад

eneral Binding Procedure 1. Refer the Transmitter Setup Table to correctly setup your transmitter. 2. Lower the throttle stick to the lowest position. Set all trims to the center position. 3. Power off the transmitter and move all switches to the 0 position. Move the throttle to the low/off position. 4. Install the bind plug in the receiver BIND/PROG port. 5. Connect the flight battery to the ESC. 6. Put the transmitter into bind mode while powering on the transmitter. Flip the model upside down and hold for 15s 7. Release the bind button/switch after 2-3 seconds. The helicopter is bound when the LED on the receiver turns solid. 8. Disconnect the flight battery and power the transmitter off.

@matthewh6242 3 года назад

I didn’t realize i never had safe on. Time to give helis a try again

@BrianPhillipsRC 3 года назад

AWESOME!

@flydaddie Год назад

thanks for this video. I just bought the Blade 230s and I have an NX8 radio so I'm excited to fly it. I watch all your videos. Say hello to camera crew for me.

@mauiwolf618 3 года назад

It would seem to me it would be easier to fly planes right? Lol I still enjoyed the review and video. By the way great job on the driveway.

@BrianPhillipsRC 3 года назад

Depends on your background....but Heli's are typically harder to fly.

@billgorman6312 3 года назад

Brian, you can do a family challenge put a target on the ground and see how can land closest to the center. This may help you with controlling the heli.

@BrianPhillipsRC 3 года назад

Sure I do that anyway ;) It's just in my head, so only I can tell if I actually hit it - LOL ;)

@mikebird8290 3 года назад

SAFE IS A GREAT TOOL TO USE TO YOUR OWN ADVANTAGE ✌️

@BrianPhillipsRC 3 года назад

It sure is ;)

@914va 3 года назад

SAFE is your Friend!

@BrianPhillipsRC 3 года назад

Sure is!!!

@agp7073 Год назад

Thanks Brian, subscribed!!

@BrianPhillipsRC Год назад

Welcome! Glad you're here with us, and so much more content - you might need a few years to get caught up ;)

@morrismercier9849 2 года назад

Bryan this was a very excellent video don't get me wrong. Punk. But I don't know if you are aware the NX8 has pre programmed airplanes and hellies in it. I forget exactly where it's at but if I had my radio in front of me I could go right to it. Do it. Look through your radio and there are some preprogrammed over a 100 planes in hell's already in the radio and the 230S is one of them. I have used this to preprogram my Draco . And it worked excellent.

@BrianPhillipsRC 2 года назад

Did you call me "Punk"?

@noelboyd4827 11 месяцев назад

Hey Brian, do you know if the "panic button" works in idle up 1 and idle up 2 or does it only work in Normal mode ? Thanks buddy, i totally a newbie to heli's. Ive been flying rc planes for almost 5 years.

@Dynaglide92rc Месяц назад

Help Please . I have this same Heli . Collective pitch is not working . Throttle works and so does Rudder on left stick . Right gimbal is fine. Elevator and ailerons move fine . Please help . I'm using the DXs transmitter that came it came with .

@SkansmanRC 3 года назад

Nice 👍

@BrianPhillipsRC 3 года назад

Thanks, sure is!

@SkansmanRC 3 года назад

@@BrianPhillipsRC Love your videos btw.. Keep up the good work.. Cheers from Sweden 🇸🇪😁👍

@whoknows8678 Год назад

That's why our cats are 100% indoors only.

@BrianPhillipsRC Год назад

LOL

@TEDDY12332 2 года назад

Hey Brian the manual says put the ban plug in and turn the Heli upside down Did you see that in the manual

@TEDDY12332 2 года назад

It’s at the bottom of page 9

@BrianPhillipsRC 2 года назад

I didn't! Thanks ;)

@BrianPhillipsRC 2 года назад

I need to give it a try Jimmy!

@eddiebewes2506 3 года назад

Brian can this heli be set up on a nx6 .Eddie

@BrianPhillipsRC 3 года назад

Should be okay. Might need to update your firmware.

@FeathersinFocus Год назад

Hi Bryan. Thanks a lot for the awesome video. I'm super new to the whole rc thing and just got the blade 230s bnf and paired it up with my NX8, thanks to your nice video. I tried to connect the battery for the first time after inserting the bind plug and I hear beeps and see red and orange lights flashing on the receiver. Is this normal? Did I do something wrong, your guidance to fix this would be very helpful. Thank you

@BrianPhillipsRC Год назад

I think you might still be in BIND MODE. Have you bound it yet? If not, you'll need to actually BIND it, then this flashing will stop, and you'll get a solid light. Give it a try. Make sure you have your throttle hold on!!! ;)

@FeathersinFocus Год назад

@@BrianPhillipsRC Thanks a ton for the quick response. I just bound it without issues. I freaked out for no reason lol. One more question please. I hear occasional spark kind of sounds (like honeybee flying around). I'm guessing it's the batter trying to adjust? Thanks again

@MBK0021 Год назад

I have the M1/M2 that came with preloaded settings on Radiomaster Zorro. Will those settings work for the BNF version of this? Can't find any helicopter videos with setup on the Zorro and the generic Heli settings that come preloaded on the Zorro are way different than the preloaded M1/M2 settings.

@Randolphburtt384 4 месяца назад

Just hopefully my dxs transmitter will be ok with the new bnf.

@davidlewis620 2 года назад

I'm so glad I can watch you set up your Blade 230s with your NX8! I tried months ago with my DX6 but it gave me a headache and I gave up!!Now I have an NX6 and a DXS that came with my AeroScout S 2 1.1m. I am not ready to try again with my NX6 so can I bind my Blade 230s to the DXS that came with the AeroScout S 2 1.1m RTF with no problems? I know you are swamped with other you tubers but can you reply ASAP so I can finally fly my helicopter? Thank you !!

@BrianPhillipsRC 2 года назад

You can make a profile for the Blade 230S in that DXS, believe it or not! I know, it's a STRANGE process, and I didn't ever actually "do it" since when I flew my 230S on the DXS, it was as an out of box RTF - the good news, you can follow the procedure pretty much step by step to make a "model" in your DXS - it actually stores up to 5 heli's and 5 planes in the onboard memory!!! Nobody ever does it, that I know of, and Not 100% sure how to do any of it, but the newer DXS's are supposed to do this, and there is a builtin from Horizon Hobby on how to do it. ...THAT BEING SAID, just do it on the NX6 and you'll be able to pretty much do JUST like I did (only I used the NX8...ALMOST exactly the same procedure). The NX6 is AMAZING for this heli! Make sure you're firmware is up to date for the best experience, but even the oldest should give you access to FORWARD PROGRAMMING so you can activate SAFE ;)

@davidlewis620 2 года назад

@@BrianPhillipsRC Thanks Brian, your the best!!!

@cydrec 2 года назад

Hello everyone and Happy New Year ! I just received the Blade 230S Smart BNF equipped with the AR6250MHXA. How to insert the Bind Plug association socket without dismantling everything? In addition, besides the fact that my fingers do not pass and that I do not see the plugs, a plug is already connected to the BIND plug ..... My radio is a Spektrum DX6 G2 EU. All have a happy new year 2022!

@BrianPhillipsRC 2 года назад

You have a BIND BUTTON. Please watch the Radio Setup part of this video, and I show how to do it ;)

@cydrec 2 года назад

@@BrianPhillipsRC the bind port is glued at left side of the frame :-)

@glenn4452 Год назад

Great video love it

@markuslang6695 2 года назад

Hello Brian, great video, thank you very much. I own the same combination as you: Blade 230S Smart RTF and a Spektrum NX8 on top. I've done the programming of the NX8 acc. to the manual and double-checked it twice. On my first flight and after about one minute in normal mode the tail rotor made the heli spin about 90deg and then throttle was gone and the heli "landed", luckily on gras and only from 1,5m flight altitude. I checked and restartet the heli, but the same situation / problem after about one minute again. When binding the heli to the RFT-radio DXs everthing was fine, not any issues or problems at all. I had exactly the same situation with my Nano S3 and my 120 S2: Tail rotor spin and "landing" after about one minute of flight time, but no problems at all when using their RTF-radios. So my question is: Did you edit or adjust any parameters on your NX8 or did you just the standard BNF-programming acc. to the manual? Thank you very much in advance. Best regards, Markus.

@BrianPhillipsRC 2 года назад

Glad you got lucky on those spins! I've seen some heli's do some weird things. These Horizon Hobby heli's have been pretty good, except when you're low on altitude and try to flip into SAFE mode, not allowing the heli enough time to react... As for what I did or didn't do on radio setup, we filmed that whole part. I honestly setup hundreds of these aircraft and can't remember. You can scan to the end of the video to answer your question, but it's NOT the downloaded BNF profile, for sure...we don't ever do that.

@markuslang6695 2 года назад

@@BrianPhillipsRC Dear Brian, thank you very much for your fast answer. I´m only an absolute beginner reg. heli-flight (12x 4 minutes of flight time) and therefore I´m only flying in normal mode (with SAFE). Until now, I´ve only tried idle-up 1 for some seconds finding out I have to learn the basics in normal mode first. I know this may sound stupid to experts, but I want to avoid crashing a 300€ heli just by oversetimating my skills.

@Randolphburtt384 4 месяца назад

The first one I got didn't have the emblem on the windshield. Didn't have safe ether.

@katrinatrafford5104 2 года назад

Iv followed your vid. Iv followed the book but when I press the bind button my heli does not react. My panic doesn’t work and I could find in your video where you set it up. Help anybody ?? Please thanks

@BrianPhillipsRC 2 года назад

Radio setup is at the end of the video. You have to do the WHOLE SETUP... Did you by chance do the FORWARD PROGRAMMING ??? Where you activate SAFE? Try that first.

@Randolphburtt384 4 месяца назад

Bought the bind and fly because I got the dxs transmitter. What do I do to make sure safe is active.

@dahlirosli4549 3 года назад

Nice so good Kool 🤗

@BrianPhillipsRC 3 года назад

Thanks!

@westhobbiesrc8051 3 года назад

Do a Trim flight to trim swash plate

@BrianPhillipsRC 3 года назад

I was reading about it, but I'm still confused on exactly how that's accomplished.

@57heeler 2 года назад

I know this video is 6 months old but maybe you can remember...I set up by the manual like you did with my NX8 radio but my GEAR channel is set to f-mode and you did B switch it did still fly though. Now my question, I can only get stability or safe to acuate on one flite mode as in FLITE MODE 3. It wont even bring up the other two. I'm not ready for the highest rate yet and was hoping I could get SAFE or STABILITY to operate on the intermediate mode and the advanced mode. I don't think you need it in the NORMAL MODE. So... NORMAL MODE (no need for SAFE)---- F-MODE 2 INTERMEDIATE MODE (SAFE) -- FLITE MODE 3 AGILITY MODE (SAFE) I know you go through FORWARD PROGRAMMING and go to stability but it only offers one mode. THOUGHTS???? Thanks in advance

@BrianPhillipsRC 2 года назад

YES, SAFE is only going to work on the LOWER (simple - NON- Idle Up) This is normal, I'm confirming again with the most recent heli we just did, the 150S (same thing) 330S (same as well, fyi). ...SO, no, you're not doing anything wrong that I can see. Just be 100% sure you KNOW where the "SAFE" mode is and if you're okay with it in that mode. Make 100% sure your THROTTLE HOLD is working!!!! This is very critical, and don't want you to be sending me nasty pictures of your chopped up hands (people REALLY do this from time to time - gross!)

@57heeler 2 года назад

@@BrianPhillipsRC HAHA ok no gross pics...another question I hope you can answer. With planes I'm pretty sure you can't TRIM IT OUT in the safe mode. My experience is trim out of safe to get the best result. Nowthen, to perform a TRIM FLITE on the Blade 230 do you have to be in one of the stunt modes and not in the SAFE or NORMAL MODE??

@mattcook5302 3 года назад

LoL, gonna order one of these now. Thx Dr Feelgood you fine it again.

@mattcook5302 3 года назад

PS. Is there anything extra that I need to buy? Blades? Stuff like that?

@rcaviator8408 3 года назад

@@mattcook5302 Yes, I would definately buy blades, a main shaft, and a feathering shaft, in case. Maybe even some pitch links.

@BrianPhillipsRC 3 года назад

If you get the RTF, you'll just some patience, and a USB adapter...the AA's come in the package ;) If you get the BNF, there's a bit more needed. Looks like Rc Aviator made some suggestions too. My suggesting would be...don't fly it upside-down till you're ready ;) LOL

@mattcook5302 3 года назад

Probably never get it upside down. Never flown a heli before. Complete noob on this one. I'll have to try the SIM when I get home this weekend

@mattcook5302 3 года назад

Just ordered, got the complete night light set also. LoL

@DualWings Год назад

Brian, I went through all of settings and set them exactly like you did in this video but my 230s will not take off and fly level, it always wants to "roll over" to the right. I am very new to the RC world and could sure use some help. I have a Spektrum NX6. Any help would be appreciated. Thank you.

@MelinsRCTech 2 года назад

Hi Brian and what a awesome video as always. I have a quick question for you because Im setting this heli up with my dx6 and it cant do forward programming like you did to enable safe so before I try it I just wondering how I setup safe on my dx6 or will it work as it is? Also the channel input config on ch 5 gear it says flightmode but you did the B switch instead. Should I do the same as you there to? I have done the programming excactly according to your setup but before I lift off I just want to be sure that safe is activated. Best regards Pierre 😃

@BrianPhillipsRC 2 года назад

Can you update FIRMWARE to get Forward Programming??? Try this FIRST. You might NEED it (regrettably)

@MelinsRCTech 2 года назад

@@BrianPhillipsRC ok.. Awesome I will try that..thanx 😃👍

@timmytfpv7316 2 года назад

any tips on tail wag suggestion's in forward programing ? just seems like the tail has to much gain

@BrianPhillipsRC 2 года назад

I haven't yet figured it out, but I'm just not a super expert on heli's :(

@anandpalled Год назад

Hello Brain/Pilots I had recently brought this from a forum and the rx was dead and now its costing like 99 pounds,does any one know of other cheaper alternatives. Thank you

@BrianPhillipsRC Год назад

I don't. Heli Rx'es are crazy expensive!!! Have you considered getting a new heli, and keeping that one you got cheaper for spare parts?

@ror-ys3qp 2 года назад

why does your radio not talk ? It should tell you the position of the switches.

@BrianPhillipsRC 2 года назад

I can program these things, and do on may aircraft.

@marvillealleyne3060 Год назад

Hi, I am posting this comment hoping to get some help. I recently bought the Blade 230S Smart (BLH 1250) and I am trying to set it up with my DX6e Transmitter. However, when I get to the F-Mode Setup (35 into your video), my transmitter only displays Switch 1 and Hold Switch...I am not seeing Switch 2. Can anyone assist? BTW I am relatively new to this.

@mikebird8290 3 года назад

HI BRIAN DID YOU USE THE BIND AND FLY PROGRAM IR DID YOU SET IT UP YOURSELF SIR?

@BrianPhillipsRC 3 года назад

I set it up following the manual,. It's in this video ;)

@eddiebewes2506 2 года назад

Hi Brian The radio that comes with the Blade 230 S (DXs) do you know if it is in mode1 or 2 out of the box as i fly in mode 2 with my planes. I have just jointed a club that flies only helis if it is mode 1 how do I change it over to mode 2.thanks Eddie

@BrianPhillipsRC 2 года назад

Mine was mode 2.

@cjrat6656 3 года назад

When flying Helis, I have my timer setup to stop at 0 throttle.. so it's not counting down.

@BrianPhillipsRC 3 года назад

Yeah, "One out" might not make sense for the heli.

@jameshawkins7948 2 года назад

Can you bind this too a JR 12X radio. I’m old school.

@BrianPhillipsRC 2 года назад

Cool!

@Wild_Buggy 2 года назад

Excellent video, thank you! I was wondering which Spektrum charger would you suggest to someone who has three batteries (G2, 850mah, 11.1volt) ? I currently have a portable S120 charger and it requires 2 hours to charge each battery....

@BrianPhillipsRC 2 года назад

I still say, S2200 bit.ly/398ohO6 - then you need some adapters, or need to build some adapters to plug in the smaller IC2 connectors to the IC3 - Accessories bit.ly/30i7Biq

@Wild_Buggy 2 года назад

@@BrianPhillipsRC thank you Sir 👍

@simonbryant3828 2 года назад

Hi, from the UK here, do you prefer the 230 S than the Eachine E 180?

@BrianPhillipsRC 2 года назад

Yes. I prefer the 230S in RTF or BNF. Also, I'm doing another Horizon Hobby Heli in the next few weeks, if all goes to plan ;)

@petitxavier277 2 года назад

Brian! bonjour de France! je regarde tes vidéos et elles sont top!!! j ai acheter le Blade 230s en RTF , et j ai acheté une NX8 comme toi, j ai bien suivi ta programmation, impeccable ! mais au 1er vol, l hélicoptère se comportais très bizarrement, comme s il n était pas stabiliser et le crash..!! J ai repris ta video et j ai vu (time code: 3.47 minutes) que tu rentrais sur le programme: forward programming, moi je n ai pas se mode sur ma radio ! peux tu m'aider? merci et bonne continuation !!! ( la radio est neuve, binder sur 1 seul appareil le Blade 230, elle n a jamais servie sur d autre appareils)

@BrianPhillipsRC 2 года назад

Update the FIRMWARE on your NX8 Transmitter and you should gain access to the FORWARD PROGRAMMING menu. Good luck, and Enjoy - You NEED that step to turn on the AUTO LEVELING, so please do it and you'll be very impressed with how easy it is! Thanks for watching and glad we could help encourage you Petit Xavier!

@petitxavier277 2 года назад

@@BrianPhillipsRC ok. Je pensais avoir mis à jour la NX8. Je vais vérifier maintenant !👍🙏

@petitxavier277 2 года назад

@@BrianPhillipsRC je viens de recharger toute les versions. J ai en place la version : 3.06.02 et toujours pas de forward programming

@mikewinter9344 3 года назад

When calibrating you need to unplug both motors

@BrianPhillipsRC 3 года назад

Okay! Thanks Mike

@Mao_tse_tung 3 года назад

You should review the mcpx bl2 and the 360

@BrianPhillipsRC 3 года назад

I THINK that's the one we have coming... (might be the 330?)

@Mao_tse_tung 3 года назад

@@BrianPhillipsRC I been eyeing that up seems like a sweet heli and I like the size

@rosepierce9744 2 года назад

Can I bind this to my dx6 or do I need the new dx6

@BrianPhillipsRC 2 года назад

You can bind it, but not sure how the forward programming works on the older DX6'es - you'll have to update the firmware for sure, if it's going to work.

@pooluop 3 года назад

HI BRIAN can you get the omp m2 for review or m1

@BrianPhillipsRC 3 года назад

I can try ;)

@Randolphburtt384 4 месяца назад

Won't have anyway to activate it really worried I need safe I'm getting better at flying helicopters just not an expert.

@Reignaboveitall 3 года назад

God is good. Thank the Lord for technology 😄

@BrianPhillipsRC 3 года назад

Yes, He is, and love these RC aircraft too!

@davidpuissegur1263 3 года назад

Making RU-vid RC Videos is harder than it looks. But your camera crew makes it look easy. Can I barrow your camera crew ?

@BrianPhillipsRC 3 года назад

LOL thanks, and no ;)

@breeder1705 Год назад

U wanna torture yourself -- buy Spectrum -- “Bind-Fail” will become your second career! It could be because Spectrum Engeneer’s French benefits include “all you can smoke weed”!