Blender Tutorial - Waterfall 

Thank you for watching, brentlyandbrentoons..!! :) The waterfall was ok at first, but suddenly started to clip through half way down? Could you double check the position of the mesh to see if the entire mesh is placed inside the domain like 1:21 please? :) If the mesh is placed inside the domain entirely, please let me know. I'll check to see what could have gone wrong. :)

Thank you for watching, catarinagraca9541..!! :) Please increase the size of the domain cube, and the water will drop instead of filling up with cube. :)

You're always welcome, Ascander211..!! :) Thank you for watching..!! :)

Thank you for watching, Paul..!! :)

You're always welcome, Oksana..!! :) Thank you for watching..!! :)

You're always welcome, ognalioth5261..!! :) Yes, the speed can be controlled quite a number of ways. :) One of them is by setting up a new value on the Initial Velocity setting, located under 'Flow -> Flow Source'. Another is by controlling the gravity. (Scene Properties -> Gravity -> Gravity X/Y/Z).

Thank you for watching, Sean..!! :) The waterfall should show up in Cycles. :)

Thanks too, great tutorial

Thank you for watching, c0mplicated..!! :) I have not used threejs yet, so I don't know much about that topic. :) I looked into the Blender StackExchange website and found the gltf export has got some issues. :( blender.stackexchange.com/questions/281041/gltf-2-0-not-exporting-animations blender.stackexchange.com/questions/141716/png-loses-alpha-on-gltf-export/280774

¡¡Gracias por ver mi video tutorial, Jadiel .. !! :) Reduzca el valor de resolución fluida y vuelva a intentarlo. El valor predeterminado es 32, así que reduzca el valor para evitar problemas de lentitud. - Cómo encontrar la resolución - 1. Propiedades físicas. 2. Fluido. 3. Configuración. 4. Resolución. Configuré el mío en 80, pero se puede usar el valor más bajo, como 32 o 16. Las partículas de agua pueden parecer sólidas, pero estará bien. :) --- Thank you for watching my tutorial video, Jadiel..!! :) Please reduce the fluid resolution value, and try again.. The default value is 32, so please lower the value to avoid the slowness issue. - How to find the resolution - 1. Physics Properties. 2. Fluid. 3. Settings. 4. Resolution. I've set mine to 80, but the lower value like 32 or 16 can be used. The water particles might look solid, but that will be ok. :)

@@BlenderStudy chale, Gracias.

@@zunchy_rd195 ¡Siempre te esperamos, Jadiel! :)

Thank you for watching, Wild Millardz..!! :) I have just followed the entire tutorial myself and confirmed it was working. Have you baked the domain? If there was no fluid simulation, then there's a good chance the domain was not baked. :)

I am very new i will try again.

@@BlenderStudy yes! this is what it was. sorry for the late response. thank you very much! i now understand i have to free bake and re bake when making changes.

You're always welcome, Wild Millardz..!! :) (Oh, no problem at all..!!) :) Thank you for watching..!! :)

Thank you for watching, NickKey..!! :)

@@BlenderStudy thank you for posting, Blender Study! Look forward to seeing your channel grow and grow 😃

@@gerdsfargen6687 You're always welcome, NickKey..!! :) Thank you..!! :) (Sorry for the late reply.. Your comment just appeared today along with dozens of other comments for some reason..) :(

Thank you for watching, Barış..!! :) 7-10 viewport preview fps is too low for this animation. I'm wondering if this could be a hardware issue. (e.g. The computer needs more CPU/GPU/RAM/etc..)

maybe this could help! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3S0NvmcYq08.html its a video from the Blender Guru in which he describes, what "good" hardware for 3d modeling is! obviously you dont need to go top tier and spend 1-2k on equipment but it might give you a general idea on what you can and maybe should use!

Thank you for watching, massimomweniart..!! :) Did you get any error messages? There should be a status message at the bottom of the screen when we bake in Blender. :)

Make sure that the shape of the thing that spits out water is big enough.

Thank you for watching, smugvanis1357..!! :)

You're always welcome, athinasdesigns..!! :) Thank you for watching..!! :)

Thank you for watching, geezamelia..!! :) Sorry, but I don't provide the original blend files for download to anyone. :( Please let me know if you got stuck while following the tutorial. I'll write you a step-by-step guide here. :)

You're always welcome, Chuctanunda..!! :) Thank you for watching..!! :)

You're very welcome, jamesdelb6885..!! :) Thank you for watching..!! :)

You're always welcome, debeshbhattarai..!! :) Thank you for watching..!! :)

Thank you for watching, anishk5572..!! :) Yes, the domain's shape can be changed. :)

You're always welcome, Hatsune..!! :) Thank you for watching..!! :)

@@BlenderStudy Fu, Fu Fu... (Laughing) You can always call me Anna which is my real name, but, don't promise me, you won't tell anyone, ok ? 😯😯

@@hatsunemikuchannel2023 I won't tell..!! :) Thank you for watching, Anna..!! :)

Thank you for watching, vchowta9685..!! :) Have you used a new scene to create a new liquid simulation from scratch? If we just replace the hill mesh, the water simulation won't work. I always recommend everyone to always start from a new scene for other mesh based liquid simulation. :)

@@BlenderStudy thanks for the reply !! i just started a new file with exact steps followed as you, but still no animation happening :( , please help , where am i going wrong

Thank you for the reply, vchowta9685..!! :) Could you upload the .blend file to gofile.io website, please? I'll take a look. :) Gofile will expire files in 7 days, if no one downloads after uploading. When posting a link, please use the following format, otherwise the commenting system will automatically remove any comments containing a full link. E.g. "Here is the file. gofile (dot) io / e3r8ae2"

@@BlenderStudy hi i was doing this again to upload the file and this time it worked :) thanks !! still dont know y it dint work the previous times

You're always welcome, vchowta9685..!! :) Thank you for the update..!! :) Yes, that happens to me while using Blender as well.. Sometimes things don't work, and if I try it again with a new document -- they work..!! :)

You're always welcome, nhlanganisotshabangu3774..!! :) Thank you for watching..!! :)

Thank you for watching, ArtofAngels..!! :) I'm sorry about the comments being locked. There have been a lot of weird comments from a lot of people lately, so I had to lock the comments. :)

@@BlenderStudy I understand that! I am currently learning blender and for my assignment I am following your tracks to help me through it. Hoping Blender 3.0+ is mostly the same (I'm guessing so, would be bad design choice if they mixed the interface around too much)

Please let me know if anything gets stuck. I'll follow up right away. :) One major change for Blender 3.0+ that I need to mention (since 2.8) is how Blender 3.0+'s knife projection method changed. :( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S4Szhx7D2zo.html (Just remember to convert any meshes to curves, before knife projecting them on to the target mesh.) :)

You're always welcome, Xplotter..!! :) Thank you for watching..!! :)