Blending tips 

Wooow😲😲!!! You are really a magican!!! After every video you put here on youtube i become a much better painter and doing less mistakes!!! You cant imagine how gratefull i am for all your vids👍👌😉!!!tnx👊👊

Hey Gabriel nice work keep it up with your great attitude and positive energy. I've been using the same techniques when spraying clear for 13 years and to me it's always money in the back. Only the painter behind that specific spraygun can judge and control his results after a paint job. I love how you discibe that if you paint it it ain't right, yet u continue to do videos to give us tips on how to better ourselves. This is also the reason why you continue to get more subscribers everyday. God bless you "Amigo" saludos desde la Bahia en California.

Learning what not to do is just as important as learning what to do. Thanks for the video. Had a blast.

This tip about spraying first coat of clear not too far to the edge is brilliant...because when you put all clear full from edge to edge then color can be a little bit darker 🙂 I’ve learned that a few days ago at schooling center 😁

I like the passion you put into your work and thanks for the upload

Perfecto como siempre!!! No es la pintura que usas ni la laca.... the one and only !!!

👍👍👍👍We are two alike. Keep up the good tipes and work....love to see younger painters in action

Hey, thanks for all the tip(s) on blending silvers. I just finished my 1st attempt at blending a bright metallic silver and your suggestions and techniques helped me pull it off. It turned out awesome!Thank you again Gabriel.

I painted my wing in my shed and got it to match with out blend you could see it was newer but other a few weeks it was perfect

I bought 2 of those blowers.Cant wait to use them on the standoblu i paint.Cutting cycle time means more $.Keep doing the videos there a big help.

Thanks for the videos! I've been working on the half moon blends. Sometimes perfect,other times looks like where a kid has been playing. May be the gun( Tekna basecoat) or the operator(me)!!!

Love the half moon idea and i actualy learned another thin today. so cool. thanx. dont put your clear up to the edge on your first clear. stunning. clear does affect your colour. diamond coating or the not. Thanx Francois

The other benifit using your walcom drier is quicker drying which means less wet time with paint, for crap to fall on it

your enthusiasm is awesome man lol I love your videos. also that half moon technique, I'm gonna try that out next time I can get in the booth. My painter is either gonna think I'm a genius or he's gonna be mad I've learned something that awesome without him lmao. & thanks for that tip on the clear coat on the edge of panels!

Gabe u most of being a good day....bro never saw u so hyper.....but u do it well all the time..👍👍👍👍👍👍

Excellent vid💪farting up a storm ⛈ wooooo

Bro your an amazing painter I learn a lot with your video

Thanks for the knowledge...great work

I enjoy watching your videos, I would like to see the cars before and after the repair. It seems like the story is not finished without the before and after. Regards.

Watching from Ireland keep up the good work.. I love your videos/work..

So much good advice in this

Your English is good enough for me. Good videos.

Great blend ,but..using the spies hacker hitech waterbase basecoat , that same job could have been sprayed in under 3min

I just bought a downdraft booth, only thing I need now to be SET is figuring out the respiration system. Si puedes ace un video para los maskaras de aire que usas amigo porfavor, gracias y buen video!

please let us know what gun , paint and cear coat you use in your vids . enjoy watching someone with pride in what they do .

When you dont use wetbed and you dont tack before you apply clearcoat, do you ever get any dusty looking clear? I painted a ford explorer front end with a very course metallic code (new hood) and didnt tack before clear so the clear looked like there was a lot of dry basecoat dust. I covered it up with another very heavy coat of clear. What do you think? Much love and respect from Atlanta GA you do great clean work!

Gabriel por que no usas el bake de tu booth para secar el base coat? No se te ensucia mucho si lo secas con el blower. Saludos hermano desde LA

I am 24 and I do paint here and their my boss is 41 and I’m his buffer prep tech and detailer lol but the differences I’ve seen in your paint work is you don’t go past the next panel that much I know your using a 1.2 so I’m not bitching I haven’t used one I always get picture frame if I stop at the edge and your blends are amazing really liked what you did as a really young painter I learned something I have been painting since 14 but we all still say we suck lol but I hate Ppg enviorbase tbh I like glasurit

Great job you are awesome I am learning a lot 😎

Good job Gabriel,thanks very shine, Good blend como siempre excelente saludos 👍

Nice mood perfect result

Thanks for the learning curve... just subscribed bud!. Quick question, would you give the thumbs up on the Iwata WS400 with the 1.2 tip for a flat glass like finish compared to the likes of Devilbiss GTI Pro Lite or the Sagola 3300 GTO? I'm a novice at this trade.

Good tips and great work as always!

Awesome blend dude!

Another nice video 🙏 I always learn thanks buddy

Hello, Gabriel, I follow you a while ago. I wanted to ask you how long it took you to become the excellent painter you are today?? I'm from Argentina, I work matching colors in a distributor. something that fills me with tis videos is in addition to your energy, your way of explaining, you are very didactic...

I'm more interested in the suit and helmet your wearing.. brand and were to find it... nicer than what I had when I did it for a living...mine was fresh air supplied but much more cumbersome... guess I'll Google it...

It looks like you have a happy day 😁 And a bit of "elevatormusic" now 🤣 Yes clearcoat works like a lens ... so it is beter to make the edges as thin as posibel.... most important by silver... somtimes i use to the edges only F.O.T. On MB744 Audi LX7W VW LA7W f.ex. If you spray on 744 two coats of clear on the edges after blending the color will looks better without blending 😂 Bmw 300 Alpine white will look much to grey with to much clear over it .. f.ex So it is not only by metallics.... Nice week all 😉

looking good. Do you get any pinching or anything by only giving your base 10min flash? I think ppg recommends 20 minimum.

Good painter, nice job.

How long is your whip hose.I like that clean air belt you got.I dont like using mine on large hoods.It sits on my side instead of my back like yours.

Love your tips and tricks ! Keep up the good work ! How many cars you paint per day?

Great video again! But here you don’t use that clear base stuff...to help silvers lay flat on the blend..I’ve seen others do it...do you do it? And why not here? Thanks again.

Buen trabajo!!!! Aprendo mucho de tus videos.. Éxito siempre

Perfect

Do some of you guys use the D8175 clearcoat like most of us use here in norway?..it dries in 5 min (object temperature 60)...any feedback on tje use of this clear would be great...we have some difficults with it specially on roofs and hoods so any feedback on this would be great:)??? Keep up the great videos:):)

Can flg 5 do the half moon blend?

Also another thing we habe problems with in the cold north (norway:)..is the drying of the tricoat paint (PPG ENVIROBASE)...the topcoats with the T490 in it...so any help on this matter would also be great..ideas about how to speed up the drying of this when many colors have 2 - 4 coats of this shitty mess:) on top of the basecoat:)??

What grit of sand paper are you using with the blending panel? Thanks gabe!

gabe i always start at the bottom, just feel i can see the finish better? keep up the good work!

You liking the walcom?? I've had the td3 system and the genesi for 4 yrs and they work awesome

Luv ur channel If and when u use a blending agent does it go on before or after the base coat

Great job man!!!

Goods tips BROU!!! Thanks !!!! Excellent work I need the walcom 😁👊!!!!!! Todos aprendemos de todos!!!!!!! 👍👍😎😎✌✌✌🍻🍻👌 Dios te bendiga amigo!!!! ✋✋👍

How many cups of coffee did you have?! I love it.

Motovpainter,,looks 👌awesome work.Didn't you say you sold your ws400 iwata gun!?Or did you buy a new ws400 gun?

Me gustaría que hagas videos en español también, aunque tengo un inglés avanzado hay palabras técnicas que no me dejan entender el proceso😭

Nice job my friend i like you are tips

Being a painter and seeing how close you came to touching the bumper @min 8:30 made me jump off my seat....feeeww close one. 🙈😨😱

What are the blowers called? Do you have a link?

hahaha i love the part when you say i am farting like a storm in there hahahah im deaddd hahahah

What type of paint do u use waterbased or solvent

You have a link to the gun your using?

Great, where i can buy that blower?

Awesome Gabe you’re the man.

🤩🤩🤩🤩🤩

evil gabe! gets the job done!

Hi Gab, are you from Argentina ?

Hell yes

Good entertainment Gab

Nice!!!!!!!!

your hyped up today lol :-)

From 1:35 on you sound like you’re Jamaican! Haha! “Half moon mon!” “Bad mon” 😎🤣

what gun are you using for this project?? 3m accuspray gun?? sorry I didn,t catch it still great video

i don't brag & i don't compete.i'm a low key worker.i can laugh at anything in any auto body.

Gracias por las clases

where can i buy 1 of your blowers?

How can I buy blower and suit?

شكرا على الترجمة

How can I order your blower?

Good job...

How much does your blower cost?

Looks like a different shade.

Your advice of blowing in one direction has been super useful for me. I must have saved like a 100 hours of polish time and gained a lot of respect in my workplace in the ~12 months that I've practiced it. I allways took my time to blow panels for an extended duration hoping to save in potential polishing time in the end. After I started blowing in a particular direction I've started to reduce my blowing passes while not compromising on results :D However the "motivated painters" blower you advocate is of a questionable value IMO. I have tried them all and ended up with a "venturi" blower (looks something like this "i.ytimg.com/vi/PGxDO2WHnOY/maxresdefault.jpg" that screams like a banshee (ear protection is strongly advised) but after I'm done with it no particles will summon while clearcoating @ 2.5 bar at close range. Your waterbase drying blower is pussyfooting it.

No eggs in bread! 😉

Hola como siempre excelente trabajó y te sigo cómo a muchos otros pero por favor algo en español por favor tendrías más subcriptores.saludos compañero 😀👍👍👍👍👍👍

Where can I get a waffle blower

A video and tutorial of this quality and 27 dislikes? Must be all your ex girlfriends Gabriel! lol

🤣🤣🤣🤣🤣🤣🤣👍👍👍👍

E J: 🇮🇷👍👍👍❤️❤️❤️E J: 🇮🇷🙏🙏🙏🙏🙏

"Watch me nay-nay"? What the hell is this guy on?