Blink Camera Not Connecting to WiFi: How to Fix 

cannot add camera, tried everything

We’ve been struggling for 30 minutes to figure out the problem, watched 4 videos and then found you! You were the only one with a solution. 🙏 thank you!

First, unplug the SM and wait 30 seconds. -For this next step, you will need a pin or paperclip handy. While your SM is unplugged, press and hold down the reset button on the right side of the Sync Module, then plug it back into power without releasing the reset button. -Continue holding that reset button until you see a flashing red light on the SM. -Once you've seen the flashing red light, you can release the reset button. -After resetting the SM, wait patiently (about a minute at the most) for the solid blue light to change back into a solid green blinking blue light pattern. This pattern means the firmware has been reset on the SM, and it is ready to reconnect to the Wi-Fi network. -Tap on the Sync Module icon located at the bottom of the home page in the Blink app, then select the Change Wi-Fi Network option from the list displayed. Or, if your Sync Module has already been deleted from the app, go ahead and try re-adding it to your system.

2 hours of futility! Then I discovered this extremely helpful video. Turns out I had: Dead batteries, Which I then replaced with 2 more dead batteries, Then discovered that when I dropped the camera I damaged one of the metallic prongs that hold the battery securely in place with tight terminal connections. Then there was the malfunctioning WiFi and a few other adventures. But its operatiional now so I have canceled my order for a new camera….

Great video. Question...How do I check the strength of connection between a doorbell and the sync module. I can't find the option anywhere!

what does solid red light mean in top right

Good video

Okay but what about my sync module? It’s been down for a MONTH and tech support can’t help, I got into contact with my internet provider, and they couldn’t help either. My WiFi WORKS, but my sync module DOES NOT CONNECT.

I have right connected Sync module to my wifi and set up in the Blink App. Issue comes when trying to add camera. I scan QR from camera but wait for adding the camera but timeout happens and it has detect nothing. Any idea how to solve it ? Thank you.

My sync module 2 is not connecting to the network after filling correct password of the wifi and also showing red light after that...

I have tried to connect my wired blink camera to my Wi-Fi in my GMC truck and it will not hook up. Any ideas?

I recently deleted my doorbell and have tried for hours trying to reconnect it but nothing works, I’m scared if I also delete my sync module it also won’t be able to reconnect, on my doorbell all I get a flashing red light then it goes solid, any tips to fix this?

I have a new Wi-Fi set it to the correct 2.4 but the blink won’t change from blinking blue to yellow straight. I think it’s the box. It might be old.

TEMP STOP 5GHZ IN WIFI SETTINGS TO USE THE 2.4 FOR SET UP

Tried most everything you suggested, except resetting the sync devices, none of which worked. later on I'm looking at the my ASUS WIFI app and I'm going through list of devices and see amazon listed a few times and next to them is a red circle which means they are blocked, So I uncheck them and just like that they're all working again, Oh and one of them was listed as Nest. So basically for some reason my ASUS WIFI Router was blocking some my cameras even though they connect through a sync device.. So this is something you might want check, especially if some of your cameras won't connect or reconnect

Changed wifi.. now cant change old internet to new internet

I changed routers (same provider) but now my cameras won't connect. any advice would be appreciated.

Is sync module mandatory?

One camera on the sync module is working fine, but the other will not connect. It's clearly not the sync module that is the problem. What do I do?

Hi My blink camera is offline. It is blinking blue light. I did put my wifi password again but it alway say wrong password wifi. Can you halp me please ? Thanks alot

Still didn’t work

my camera wont connect to my wifi module and it takes forever to add it please help

None of these work