Bluetooth controlled Arduino RC Car | Control using your Mobile Phone | Ut Go

Подписаться 5 тыс.

Просмотров 345 тыс.

50% 1

Learn how to make Phone Bluetooth controlled Arduino RC Car. It contain full tutorial include all hardware and software parts.
Follow Us❤️/ Contact :
Instagram: / utgo_tech
Telegram: t.me/UtGoTech
------------------------------------------------------------------------
Components Link:
Amazon Links :
Arduino Uno Board : bit.ly/3u2dkvP
Arduino Motor Shield: bit.ly/4b1vsXr
Motor & Wheels : bit.ly/3HpUUYX
Bluetooth Module : amzn.to/3IEwU6s
Lithium Battery : amzn.to/3X1fYv0
Battery Holder : amzn.to/3QuNCGZ
Switch : amzn.to/3k2C7dS
Car Chassis/Body: amzn.to/3ipfQGP
------------------------------------------------------------------------------------------------
Library used: Adafruit Motor Shield V1 Library.
You have to install the above library before uploading the code to Arduino board
I found that the Android App is temporary disabled or removed form the play store.
You can use different Bluetooth RC Controller App from play store but you have to map the codes according to app. If you still want to use the same app then please Contact me through Instagram or Telegram, I will take backup of the app and share it or you can download the backup app directly from the google drive.
Android App: play.google.com/store/apps/de...
Google Drive Link for backup app :
drive.google.com/file/d/1Wrml...
I found that the Android App is temporary disabled or removed form the play store.
You can use different Bluetooth RC Controller App from play store but you have to map the codes according to app. If you still want to use the same app then please Contact me through Instagram or Telegram, I will take backup of the app and share it or you can download the backup app directly from the google drive.
Circuit Diagram : drive.google.com/file/d/1E-wc...
Code :
drive.google.com/drive/folder...
If you are facing issues to download the content then ask in the comment section. We will help you out.
Other Videos and Tutorials Links :
How to make heartbeat monitoring device : • How to make Heartbeat ...
How to use MAX30102 Sensor : • What is MAX30102 and h...
How to use OLED Display. : • How to use OLED with A...
How to use Liquid Crystal Display | LCD : • How to use Liquid Cry...
HOW TO USE I2C LCD Display : • HOW TO USE I2C LCD DIS...
How to use RFID CARD READER : • How to use RFID CARD R...
DIGI SPARK tutorial : • DigiSpark Tutorial - I...
How to program esp8266 using Arduino IDE : • How to program ESP8266...
How to host web pages using ESP8266 : • How to host web pages ...
Thanks for watching this Video. If you liked this video then hit the LIKE button and share it.
Please share your questions, suggestions and thoughts regarding this project in the comment section below :)
Need any help, ask in the comment section
.
If you want to support me then please subscribe to my RU-vid Channel
-- bit.ly/34GtRnZ
Thanks, see you again in my next tutorial.
Here my Social Links:
Twitter: / utgo2
Facebook: / ut.go.524
Instagram : / utgo_tech
Like | Share | Subscribe | Comment
#Arduino #Motor #Shield #MotorShield #Robot #Controller #Driver #MotorDriver #DCMotor #RC #car
------------------------------
Track: Flying High - Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Flying High - Declan D...
Free Download / Stream: alplus.io/FlyingHigh
------------------------------
Spiral by KV www.soundcloud.com/kvmusicprod/
Creative Commons - Attribution 4.0 International - CC BY 4.0
www.creativecommons.org/licenses/by/4.0/
Track: Discovery - JayJen & ASHUTOSH [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Discovery - JayJen & A...
Free Download / Stream: alplus.io/discovery

Наука

Опубликовано:

13 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,7 тыс.

@eugeneritu1639 2 года назад

I heartily thank you , nor just because of your work but the main thing is your code , your code absolutely works great, I have watched lots of video but none of them submitted a crt library in the code file for bluetooth I don't know what reason they would have , but I heartily needs to congrats you , for my resume I am doing projects and learning several things while I have also spent my pocket money to it , at first wrong code makes me feel discomfort and I even thought waste of money why should I, your work motivated me to do so and learnt lot of things , thank you so much from bottom of the heart😊

@UtGoTech 2 года назад

Welcome

@VivekSharma-ux2bl 2 года назад

Sir you are a genius....of all tutorials only yours worked for me

@UtGoTech 2 года назад

Welcome

@manav9686 2 года назад

Was reading the comments. You have great patience and thanks a lot for such a great video🙌

@UtGoTech 2 года назад

Thanks

@renaultr9 Год назад

Thank you very very much (A thousand thanks !!!) for this great Video :)

@UtGoTech Год назад

Welcome

@UtGoTech Год назад

Welcome

@vinikshirsagar6760 3 года назад

it really works, thanks a lot for this video.

@hungryavacadoo 2 года назад

How do u recharge the battery

@UtGoTech 2 года назад

Welcome 👍

@UtGoTech 2 года назад

Using lithium battery charger

@GordinhoEACAG 3 года назад

In video I saw, that bluetooth module you are using is powered by 3-6V and has 3V logical level. So I want to ask if there is no need to use logical level converter or power supply downgrade? Is blietooth module 5V tolerance? Thanks for answer.

@UtGoTech 3 года назад

It depends upon your bluetooth module breakout board.

@techwithcraft8805 2 года назад

Great Work.Thank you very much!

@UtGoTech 2 года назад

Welcome👍

@kaiyen2210 7 месяцев назад

Can i plug the rx and tx pins into the A0 - A5 slots instead? Because i plan on adding 2 servo motors

@UtGoTech 7 месяцев назад

Yes you can.

@eMedia4U 2 года назад

I was trying to follow your exact tutorial but at the end forward was left and back was right so I had to switch wires on one side to make it work correctly. Also added ForwardLeft, ForwardRight, BackLeft and BackRight to the code. Android soft support it but in the code it was missing. Other then this everything works as expected. Thank you!

@UtGoTech 2 года назад

Welcome

@samiarahmanrima8833 2 года назад

can you please share the code or explain what you added extra.

@alyhussam2570 2 года назад

@@samiarahmanrima8833 the code is in the description

@sankarabhilash1 2 года назад

Thank you so much, I made it work. I want to add headlights, does this code support that?

@UtGoTech 2 года назад

No. You have to modify the code for that

@Funny_vidoes3 2 года назад

Hello there Can you help me please ,i want to add the blutooth on my project but im already using the SERVO1 & SERVO 2 So if i conacted the RXD. TXD of the blutooth to the TX, RX of the arduino/motor driver will that work ?

@UtGoTech 2 года назад

Yes. Just remove connection when uploading program

@manohar3787 Месяц назад

Simple to understand and to the point. If the purpose was to let other people learn from you then I would suggest turn off that music and let your voice guide us. I made this project just today and worked wonderfully. Thank you

@UtGoTech Месяц назад

Welcome👍

@HURTADO-pnund- 6 месяцев назад

Hello, I love your videos but I have 2 questions. The first, can you please help me on how to install the library for the motor protector and the second, in addition to the lithium battery, can I install a battery holder and put 3 double AA batteries in them

@UtGoTech 6 месяцев назад

"Motor Protector" Library?? Sorry I didn't understand. No, you can't use 3 AA batteries because they are not able to provide enough power to drive 4 motors.

@ktrameshkumar5047 6 месяцев назад

He means ''motor shield'' library@@UtGoTech

@renugupta4461 5 месяцев назад

@@UtGoTechthere are AF motor library for v1 most motor shied, which we have to install with the code

@UtGoTech 5 месяцев назад

Install Adafruit Motor Shield V1 Library

@Ali-IBN-E-HASSAN 5 месяцев назад

Please send me the name of app for control the car.

@TheDheeeraj 9 месяцев назад

Hey Hi. In the video I see you connected the Blutooth module differently as compared to the circuit diagram which one is to refer ??

@UtGoTech 9 месяцев назад

Both are the same. You can refer to any one of them.

@kpieceemmry3387 10 месяцев назад

I am a little bit worried about how you connect your terminals on the gearmotor, is there a way you know which one is positive & negative or you just connect them and sort for the terminal later cos that might make a novice 😅like us swap forward to backward rotations etc

@UtGoTech 10 месяцев назад

Yes you can mark the terminals according to the direction of motors and use that data to connect motor terminals to the motor driver according to the position of the motor in the chassis. But it is easier to just connect the terminals and swap the terminals if the motor does not rotate in desired direction.

@braingames8385 5 месяцев назад

Thank you very much for your code, circuit diagram This is my 1st working Arduino project which I have done successfully

@UtGoTech 5 месяцев назад

Great 👍

@PUGALENTHIG Год назад

very nice video it was so helpful to me thank you

@UtGoTech Год назад

Welcome

@kpieceemmry3387 10 месяцев назад

From what I am seeing in your battery 🪫 pack seems you solder the end together while the front is lead out as positive and negative but my question is do you have to remove the soldering in other to recharge those battery or you have another technical means to charge your battery? Thanks 🙏 for your reply

@UtGoTech 10 месяцев назад

Yes 2 batteries are soldered in series, you can charge this 2S battery using a 2S charger. But you can use a battery holder as shown in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6WteNRth8xo.htmlsi=JHlNM4PpEYODciLW

@dirceudonisseli3025 3 года назад

Great Work.Thank you.

@UtGoTech 2 года назад

Welcome 👍

@user-by6oq7vj2p Год назад

awsome, good work sir🙌

@UtGoTech Год назад

Thanks a lot 😊

@spottedchannel5821 3 года назад

Great work !!.....can you please make a video on automatic and manual modes of operating of any one of the actuators using NODEMCU.... please

@UtGoTech 3 года назад

Ok sure

@spottedchannel5821 3 года назад

@@UtGoTech thank you for responding ,I will be waiting for your video 🙂

@Kira-lc4yg 2 года назад

Can u pls update the battery Amazon link which will workkk....pls? Or Can u provide the link here itself? 😔 India

@khalidsaeed6956 Год назад

Great Work Thank you very much

@UtGoTech Год назад

Welcome

@zeynebelmousa7912 3 года назад

i have a HC-06 Bluetooth module , I can pair up and connect but after an unspecified amount of time, 2 minutes Or when you give the car a command to move when the Bluetooth connection is cut off

@UtGoTech 3 года назад

One of the reason for this is voltage drop. Properly and tightly connect cables and use lithium batteries

@yosefb5066 Год назад

Great job! Please is there a difference between bluetooth module (hc 05) and (hc 06)?

@UtGoTech Год назад

Yes, HC06 can operate only in slave mode.

@alexanderthebest6241 Год назад

Do you have a 3-D print. I can put on top of the RC Using this as a final project

@UtGoTech Год назад

Currently I don't have.

@FACTSAND313 Год назад

I liked your skilled technology

@UtGoTech Год назад

Thanks 👍👍

@akshaya9624 Год назад

Are you using a male-female jumper wire to connect to the dc motor?

@UtGoTech Год назад

No. I have soldered wires to the motor terminal and then connected it to the motor driver.

@Robkoooook 3 месяца назад

Hello sir Can i use two of these batteries LG INR21700-M50T insted of that one you got in video ?

@UtGoTech 3 месяца назад

Yes you can use these.

@abdulhadichogle4069 Год назад

how did you connect it to servo pins how did u define the pins in the code

@UtGoTech Год назад

Watch my previous video on how to use motor shield.

@Lisa-ym8vr 4 месяца назад

For the connection to the tires and the motor shield, are jumper wires sufficient as cable connections? Or do they conduct too little current?

@UtGoTech 4 месяца назад

Yes. You can use jumper wires for the connections between motors and motor driver shield.

@The_Keen_Kid Год назад

thx for helping me conect the pins in the Bluetooth module

@UtGoTech Год назад

Welcome

@mashei Год назад

Hello, when I connect the Arduino to the USB & motor drive to 12v the motors work but when I disconnect USB all motors stop working. I wonder you connected the power to driver only and it works. Please If you can help?

@UtGoTech Год назад

I connected the power to driver and connected the jumper so that power from driver goes to Arduino board. Check if jumper is connected or not in you condition. But make sure to only connect the jumper when you have one power source. If you give power to both Arduino board and motor shield then the jumper must be removed before giving power.

@rehanasultana298 2 года назад

thanks bhaiya:)

@UtGoTech 2 года назад

Welcome

@user-ow1eq2ir5q Год назад

Works well!! DANKEEE

@UtGoTech Год назад

All the best

@user-ow1eq2ir5q Год назад

@@UtGoTech wait am i wrote this when??

@aayushbhatta9668 7 месяцев назад

What is the difference between soldering the points in 0 and 1 and fitting it directly in the pin?

@UtGoTech 7 месяцев назад

No difference in the working of the RC Car. Only difference in connecting the pins directly is that it will make the connection process much easier.

@sciencezone9802 3 года назад

thank you brother your code worked well.

@chandanjaiswal247 3 года назад

My not working

@UtGoTech 2 года назад

Welcome

@UtGoTech 2 года назад

Check connections and power supply

@amalsamantha Год назад

After uploading the arduino code, it says copy error messages, I don't know why

@UtGoTech Год назад

First try uploading code from example sketch. Look everything is ok or not

@sukainashameer7343 8 месяцев назад

Remove tx and rx wire from bluthoot module then upload the code. After uploading connect it again. It will work

@UtGoTech 8 месяцев назад

You don't need to because in this tutorial we have different connection.

@yuniartofarizki2459 Год назад

Thanks and do the best 👍

@UtGoTech Год назад

Thanks, will do!👍

@grow_voice 3 года назад

And when I am opening link it is showing that no preview abilable

@hiranya.tanelanka5071 3 года назад

Click on download

@UtGoTech 2 года назад

Try in different browser

@user-du1gr6jy4n 6 месяцев назад

Hello. I want to know the exect details about the things you have used please reply me

@UtGoTech 6 месяцев назад

Products links are given in the video description. You will get the full details from the product page.

@snavanith 4 месяца назад

Very helpful video and thank you so much for your help brother. Please add camera module and ultrasonic sensor to this brother

@UtGoTech 4 месяца назад

Ok I will

@premsaisiddi24680 2 года назад

Bro till how much mah battery we can plug to motor driver shield bro can I use 4.2 v 6000 mah battery of 2psc is the motors works good bro plz give me a solution bro plzz

@UtGoTech 2 года назад

More than 2000mAh and battery voltage should be between 6v to 12v.

@ernestghansah4402 Год назад

also you used this SoftwareSerial bluetoothSerial(9, 10); in the code but you didn't use the pins as such.. can you pls explain

@UtGoTech Год назад

I have used those pins. Pin 9 and 10 is connected to servo pins of motor shield.

@ernestghansah4402 Год назад

@@UtGoTech did that , but i don't know why it is not working for me :(

@DUCKMAN593 Месяц назад

Thx this heped alot😊

@UtGoTech Месяц назад

Welcome Bro 👍

@krestansky-kanal 2 года назад

does it depend on the color of the cables that I use for the motorcycles as well as for the power supply? Because I bought a battery holder and there is red and black ....

@UtGoTech 2 года назад

Colour doesn't matter but polarity does.

@elitrefy_op 6 дней назад

Should I make this RC car or the latest wifi one? I am planning on making rc cars for an exhibition so will you please respond to my queries when I start making it?

@UtGoTech 6 дней назад

Do as you like.

@FootballXEdits07 Год назад

Can i have the circuit diagram sir and by the way i have to say something in my school i had a exhibition today and i made a obstacle avouding robot with 2 of my friends we worked so hard but in the exhibition we went to see the other exhibits when i came to my one it was broken, someguy has broken it. I was so sad so when i went home i searvhed youtube to again mame it then i saw one of your videos this video was very helpful all the parts you used i had so now im making it thank you so much

@UtGoTech Год назад

Connections are simple and showed very clearly in video. Just follow the video and you will make it very easily.

@zanderanimationstudios1 7 месяцев назад

Please is it compulsory we must use adafruit cos i dont know whether we can also use l293d. I dont think there is difference there though

@UtGoTech 7 месяцев назад

If you have L293D Motor Driver Shield then you can use the Adafruit Motor Shield V1 Library.

@zanderanimationstudios1 7 месяцев назад

@@UtGoTech ok please can you kindly post a video on how to use adafruit library thank you so much i love your tutorials😊😆

@UtGoTech 7 месяцев назад

You can find the video tutorial in this part of the video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6WteNRth8xo.html

@eshamkashif4051 3 года назад

my software is giving an error during uploading the code and the blootooth module is giving a red light. i am using hc 05 blootooth module. please help

@UtGoTech 3 года назад

Please share your error

@shaunewing8973 2 года назад

GREAT VID, WILL THIS BE THE SAME FOR v2 SHIELD ?

@UtGoTech 2 года назад

No.

@heisenberg162 3 года назад

sir bluetooth module is flashing red and when uploading code it gives error what should I do I made sure adafruit library is installed correctly

@UtGoTech 3 года назад

Please share the error and also tha library you have installed

@ashishkumarsingh6285 Год назад

I have done everything but my bluethooth is not showing in available devices to connect i also tried changing bluethooth but the problem is same what can be the problem? I have used L293D motor sheild for my project. Light is coming in audino and motor sheild. But bluethooth light is not blinking for both the modules. Please guide

@UtGoTech Год назад

Directly connect your Bluetooth module to 5v and ground of Arduino board and if it is working or not

@KVishnu-el2gt 7 дней назад

Bro, why did the TX and RX pins of HC-05 go to the servo pins and not into Arduino TX and RX? Can you please explain that, that's the only confusion I have

@UtGoTech 7 дней назад

Because HC-05 is communicating through Software emulated TX and RX so that you can program the Arduino board without disconnecting any cables.

@krestansky-kanal 2 года назад

When I pluged the cabel to the computer it give me noise (when you pluged USB to the pc it gives you noise) than bluethooth module starts flashing blue and red diode and also on arduino motherboard green diode is on. After 5 seconds pc dissconnect USB cable but in app port Com 1 is avalaibe. All drivers and Windows updates are fresh and computer is clean.

@UtGoTech 2 года назад

Are you removing the jumper before connecting it to your computer?

@krestansky-kanal 2 года назад

@@UtGoTech yes

@UtGoTech 2 года назад

Where is noise coming from

@krestansky-kanal 2 года назад

@@UtGoTech by that sound I thought if you plug some USB into your computer the computer will make you sound that it's connected. Well, at the beginning it makes the sound, but then after about 5 seconds it makes a sound when some device is disconnected from the computer.

@UtGoTech 2 года назад

If you able to successfully upload the code then there is no issue with that sound.

@vedantlotlikar_yt 5 месяцев назад

thanks for this bro i on 1st price in school

@UtGoTech 5 месяцев назад

Congratulations Bro 🎉🎉❤️

@anthonydorothycagampang3431 Год назад

Sir I have a question, I have followed all your steps but when I turn on the DC Batt the BT Module wont on.

@UtGoTech Год назад

Check if your Bluetooth module is faulty or not.

@aymanegogo2924 7 месяцев назад

Thank you bro

@UtGoTech 7 месяцев назад

Most Welcome 😊

@marquitos282 2 месяца назад

Hello brother, if I want to put another type of motors, is it the same programming? and can I power it with 12v?

@UtGoTech 2 месяца назад

Yes

@longsonengti10 2 года назад

Nice

@UtGoTech 2 года назад

Thanks

@mdidea125 Год назад

awesome

@UtGoTech Год назад

Thanks

@sohamverma8315 Год назад

Bro use kar hai ki nai attach the 1K and 2K resistor to convert the Arduino's 5V logic output into 3.3v for the Bluetooth module. Because of some Bluetooth module doesn't have the inbuilt logic level converter.

@UtGoTech Год назад

I have used without voltage divider. If you want you can try.

@sohamverma8315 Год назад

@@UtGoTech I can join no arduino 3.3 v pin

@UtGoTech Год назад

I didn't understand

@user-sk4kw6zh7n Год назад

@@UtGoTech 25

@UtGoTech Год назад

@felipegranato1287 10 месяцев назад

Great work! I have this error when i upload the code: "compilation error exit status 1" u know What i need to do? :(

@UtGoTech 10 месяцев назад

Check if Arduino board is properly connected to your computer or not. Have you installed the necessary drivers?

@moisesfernandezcuevas9641 9 месяцев назад

I have a question? Doesn't the Arduino need a 9 volt battery to work? I don't see her anywhere

@UtGoTech 9 месяцев назад

The Arduino board is taking power through the motor driver shield and in the motor shield you can give voltage between 6 to 12 volts. 9 volt is the sweet spot.

@abhirajexplores4839 6 месяцев назад

How did u connect the switch to the battery and then to the uno ????

@UtGoTech 6 месяцев назад

Connect the switch between the battery and the motor shield.

@user-gw5oo1wq7m 7 месяцев назад

Did u use PID to make the car go straight? And does it turn exactly 45,90.. degree or not Thank you^^

@UtGoTech 7 месяцев назад

No, I didn't used PID. No car does not turn exactly 45 or 90 degrees.

@hirdayjeet 3 года назад

Is there any problem or risk if I connect a 9V instead ?

@UtGoTech 3 года назад

No problem.

@HURTADO-pnund- 6 месяцев назад

It is true that first I have to enter the Arduino application (page) and log in and then download the code or I was wrong about something.

@UtGoTech 6 месяцев назад

First login to your Gmail account then open the code link and download it. After downloading open Arduino IDE then install the Adafruit Motor Shield V1 Library through Library Manager and then open the downloaded code and upload it.

@HURTADO-pnund- 6 месяцев назад

Ok thanks

@UtGoTech 6 месяцев назад

👍

@gisselepacheco8315 Год назад

I did everything according to the video but when I finish programming and disconnect the usb cable from the computer, the bluetooth sensor turns off, is there anything I can do ?

@UtGoTech Год назад

After disconnecting usb cable put the jumper in the motor shield.

@flame91343 9 месяцев назад

so cool

@UtGoTech 9 месяцев назад

🤘

@ritikarane9433 3 года назад

THANK YOU FOR THE VIDEO...tried the exact same but the car is not taking instructions from the app. Could you help?

@UtGoTech 3 года назад

Is you hc05 module is properly communicating with the arduino board

@thanhannguyen524 3 года назад

hi there. have u fixed it? how to make it work? thank you

@elide532 3 года назад

What are my options for power supply?

@UtGoTech 3 года назад

I suggest you use lithium based batteries. Alkaline battery is unable to provide initial current demand due to which microcontroller restart itself due to low voltage.

@izexgamer6150 Год назад

Hey everything is fine except when I do the Arduino code I get an error saying 'problem uploading to board' pls if you know the solution tell me

@UtGoTech Год назад

Try selecting correct board and port.

@oishyislam1341 3 года назад

The code is showing error its showing 'MOTOR12_1KHZ" was not declared in this page!!!! How to solve this problem?

@UtGoTech 2 года назад

Install the library properly.

@princemaverickscaisip6898 4 месяца назад

Hello, can I use hc-06 module instead of the hc-05?

@UtGoTech 4 месяца назад

Yes you can use it.

@AnshavParmar95._ 11 месяцев назад

What is the mah of your batteries and are they connected in series or parallel?

@UtGoTech 11 месяцев назад

2 x 2500mAh lithium ion batteries connected in series

@abangtamvan4758 Месяц назад

in my project hc05 does not turn on on the Arduino motor shield when using battery power but turns on when using a laptop USB

@UtGoTech Месяц назад

Check battery voltage

@UtGoTech Месяц назад

If the battery is ok then check if the jumper is connected or not

@abangtamvan4758 Месяц назад

@@UtGoTech My battery voltage is 3.7v and the jumper is also connected

@UtGoTech Месяц назад

You should be using two 18650 lithium ion cells which are in series to make it a 7.4 volt battery pack.

@Devnandh 6 месяцев назад

Bro,could you suggest a lithium ion battery.Your link is not openable and why cant we use 9v battery

@UtGoTech 6 месяцев назад

A 9volt battery cannot provide enough power to drive 4 motors that's why you have to use Lithium based battery.

@Devnandh 6 месяцев назад

@@UtGoTech thanks bro

@UtGoTech 6 месяцев назад

Search for the LG 18650 lithium-ion battery. You can search it on the Internet because links expire's very frequently. If you are still facing issues in purchasing a Lithium ion battery then contact me I will purchase it on your behalf and send it to you.

@patriciodeleon6947 2 месяца назад

para conectar los motores se necesita soldar?

@UtGoTech 2 месяца назад

Yes

@himaamarasinghe4742 Год назад

What was that small yellow thing you plugged in

@UtGoTech Год назад

Its a jumper pin which is plugged to transfer power from motor shield to Arduino board.

@user-oh1ce5jh7r 7 месяцев назад

i am using 4 batteries in series, each of them is 1.5v( AA battery),. when I connect and control the car, it only work for 1-3 second, and then the motor seems to be stuck and cannot rotate, can you help me.

@UtGoTech 7 месяцев назад

AA batteries cannot provide enough power. Use lithium ion batteries. You can use two 18650 lithium ion batteries in series.

@user-gm6tj5rw8w 6 месяцев назад

Thank you

@UtGoTech 6 месяцев назад

Welcome

@guillykeussom6069 6 месяцев назад

Bonjour je suis passionnée par votre montage

@UtGoTech 6 месяцев назад

Thanks ❤️

@aashanaphade4305 Год назад

Hi i had one query? Can I use 4 1.5v cells?? Please reply fasr

@UtGoTech Год назад

No, it will not work.

@technicalthing5358 Год назад

if we dont use aurdiono motherboard and if we use bluetooth module hc06

@UtGoTech Год назад

If you will not use Arduino Uno or any other microcontroller then you will not be able to control your motor. But you can use HC06 in place of HC05.

@kaiyen2210 7 месяцев назад

The app is not available for in google play store for the latest android version

@UtGoTech 7 месяцев назад

The app worked on Android 13.

@UtGoTech 7 месяцев назад

Try reinstalling the app.

@rosfraggg Год назад

thank you! it worksss🎉🎉🎉 but how do you charge the power supply??

@UtGoTech Год назад

Using lithium ion battery charger.

@Devnandh 6 месяцев назад

Bro is it okay to use 9v battery or lithium should be used.Can we buy cap for lithium ion battery

@UtGoTech 6 месяцев назад

9volt will not work. You have to use lithium based battery.

@Devnandh 6 месяцев назад

@@UtGoTech thanks bro

@UtGoTech 6 месяцев назад

Welcome Bro

@Amankumar11112 10 месяцев назад

Arduino ide se software dalte Hain uska kaun sa software sahi hai Ham bata do kaun sa software dalne ka usmein

@UtGoTech 10 месяцев назад

Install Adafruit motor shield V1 library then download the code given in video description and upload it to Arduino Board.

@ktrameshkumar5047 6 месяцев назад

Hey my bluetooth is connected but it does not move the motor pls help I checked all the batteries cables wiring etc.. it is all fine but when i send the signal through the phone it does not send a current to the motor and i separately checked the bluetooth module using code; it works. Pls help

@UtGoTech 6 месяцев назад

What type of battery are you using?

@UtGoTech 6 месяцев назад

This may be due to wrong battery type.

@BouchTube 3 месяца назад

great video! i can't seem to find the app for it though? looked up bluetooth rc controller and nothing popped up? thanks

@UtGoTech 3 месяца назад

App is removed from the play Store. You can download its backup app whose link is given in the video description

@trishnaborah4701 Год назад

Hey my car is 440 g will it move smoothly

@UtGoTech Год назад

Yes

@angel.c.es.3577 Год назад

¿Se puede utilizar un Arduino Mega2560,?, con la misma configuración (Conexión y el sketch de arduino). Saludos y excelente video.

@UtGoTech Год назад

Sorry I didn't understand your language

@andreassupanda9388 2 года назад

very good video Hello can you give a complete tutorial on how to code on the arduino i want to make it Thank you

@UtGoTech 2 года назад

You don't have to code to make this. Full code is already shared in the video description.

@kellydelarosa8609 7 месяцев назад

What is the name of what you remove and insert after connecting the USB cable?

@UtGoTech 7 месяцев назад

That is called Jumper.

@robertorico4331 2 года назад

Cuándo el cable USB está conectado a la computadora funciona muy, pero si desconecto el cable USB el carro ya no funciona. Tengo conectado cuatro pilas de 1.2 volts y 1300 mA en serie. ¿Alguien me puede orientar? Gracias.

@UtGoTech 2 года назад

Sorry i didn't understand. I know English language.

@umamaheshwari154 Год назад

Sir, actually i very new to this field of robotics so can you suggest me the best Li ion battery to use.....i need it for the competition on Jan 21 (i will try to buy it by this month end and i want it to last till Jan end).... I am awaiting for the reply sir

@UtGoTech Год назад

LGABB41865 Lithium ion cells

@umamaheshwari154 Год назад

@@UtGoTech thank you sir

@UtGoTech Год назад

Welcome

@jaredsudario3276 4 месяца назад

hi sir, i just want too ask if it is required to use lithium battery. Because I'm currently using an ordinary 9v battery but the motors does not run unless I connect my arduino to the pc. I hope u can reply asap, thank you

@UtGoTech 4 месяца назад

If you are going to use a single power supply for both Arduino Board and Motor Driver Shield then you have to use a lithium battery but if you are going to use a separate power supply for both Arduino Board and Motor Driver Shield then you can use 9 Volt battery.

@jaredsudario3276 4 месяца назад

@@UtGoTech ohh i see, thank you so much!

@UtGoTech 4 месяца назад

Welcome 👍

@aravindhramb1907 Год назад

Bro where did you got the wheel and board

@UtGoTech Год назад

From Amazon

@vathsalvuppala4362 3 года назад

Sir please help the code is showing error as thereis no file directed as af motor

@UtGoTech 3 года назад

You have to install motor library

$@mauriciofracassoluongo$

@mauriciofracassoluongo 3 года назад

Why you don't have a voltage regulator in RX pin for Bluetooth module???

@UtGoTech 3 года назад

Actually some Bluetooth breakout board comes with voltage divider to convert 5v to 3.3v for the RX. That's why I have tried connecting it to Arduino tx pin directly and it work without any problem.

$@mauriciofracassoluongo$

@mauriciofracassoluongo 3 года назад

@@UtGoTech I have connected by this way, directly to Arduino tx pin as you showed it in video, but a few minutes later Bluetooth module lost the connection, I suspected that is rx pin voltage, because it works at 3.3v