BMW Engine Air Filter Replacement G30 B46 Engine 2016+

Подписаться 6 тыс.

Просмотров 24 тыс.

50% 1

In this Video we will replace the engine air filter on a 2016+ BMW G30 5 series
Service interval: approximately 30,000 miles or 3y/36months. If you live in dusty climates consider changing the filter sooner
Parts: 13-71-8-577-170 Engine Air Filter
Tools:
3/8 ratchet: amzn.to/3h9zshn
- I recommend getting a ratchet with a flex head. This provides ease of movement and more flexibility, especially when used with other jobs
1/4 ratchet: amzn.to/3VQGdDA
For the 1/4 ratchet using a flex head gives you ease of movement in tight areas and comes in handy for other jobs.
1/4” extension: amzn.to/3Y95WJt
E14 socket: amzn.to/3h67T8S
16mm socket: amzn.to/3VMLhcy
6mm socket: amzn.to/3izZcnp
T20 torx socket: amzn.to/3UFxHX0
T20 Screwdriver: amzn.to/3VXh5em
Panel Popper: amzn.to/3Y6WciH
Flat head screw driver: amzn.to/3iJpp32
Disclaimer
---The Friendly Mechanic assumes no liability for property damage or injury incurred as a result of any of the information/Reliance contained in this video. The content of this video is available for informational and educational purposes only. Always seek professional advice from your mechanic who has thoroughly inspected your vehicle and can make suggestions or judgements. Every vehicle is different, no two vehicles are the same and every repair will be different. The Friendly mechanic does not guarantee results or give warranties implied or expressed. The use of PPE (personal protective equipment) is always recommended whenever working on/with cars, vehicles, tools, parts and Chemicals of any kind. I always recommend safe and proper work practices when operating/handling power tools, hand tools, parts, liquids, chemicals, automotive lifting devices, stands, electrical equipment and or any portrayed in this video and shall not be used by untrained persons. Any injury, damage, loss of any kind that may result from improper use is the sole responsibility of the user and not myself/The Friendly Mechanic. Any and all information you use in this video shall be used at your own risk.

Авто/Мото

Опубликовано:

8 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@dalloszsolti Год назад

Why would you remove the airbox? In fact, I replaced my filter 3 times already, and I did not remove the stabilizer bar neither. It is not necessary, not even the factory procedure mention the removal of these things at all, you can easily access the filter without touching these.

@Toby_540 Год назад

Hello dalloszsolti, the air filter position and others of my G31 looks equal to this video. I tried to change the air filter. But, after removing the screws to open the filter box, I cannot remove the top because of the stabilizer. How do you change the air filter easily without remove the whole filter box or stabilizer? I hope to hear from you, thanks for this. Regards

@friendlymechanic9778 Год назад

It may be difficult without removing the stabilizer bar but it is possible. The T20 screws should be unscrewed until you see them hold themselves in place on the top air filter box. This is how you can wiggle it off without removing the stabilizer bar. I understand this can be difficult which is why I showed the longer way to do it in case you didn’t want to struggle removing it.

@friendlymechanic9778 Год назад

BMW G12 7 Series B58 How To Replace Engine Air Filter 2015- 2023 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C8hXs_zP05Y.html Here is how I do it.

@Toby_540 Год назад

@@friendlymechanic9778 Hy, many thanks for your last video. I only screwed out the screws from the top air filter box, the one screw a little bit lower which can fall down is in my opinion not necessary to remove. An of course the open the clamp. Have a good time.

@rickwilson8352 10 месяцев назад

Outstanding presentation and camera work. Thanks!

@voodoonights1671 Год назад

Thanks for this.

@fezzman3673 9 месяцев назад

You don't have to remove brace. Super simple....cover comes out with brace in place. No need to remove box. Hardest piece is to break the seal on the tube if not removed in long time. 20 minutes. Screwdriver and t20 driver.

@AdamHR11 Месяц назад

Once the whole box is out, good luck to whoever is fitting the pipe that brings the air to the air filter housing afterwards😅😅😅😅

@sttttack Год назад

Think before you put a new filter inside, vacuum or at least wipe it down with a towel, since all the dust and grime have been sitting there. Just my personal opinion.

@payoopayoo Год назад

Hello, just a question Why you took off the whole airfilter's box out ? I believe we can take off the top cover only, am I correct?

@friendlymechanic9778 Год назад

You are correct. I showed removal because it can be quite difficult with the bar in the way. So I showed some extra steps to help make it easier to remove. But it is absolutely possible without removing the complete air box.