BMW F30 Rear Brake Pad + Rotor Replacement

Подписаться 18 тыс.

Просмотров 30 тыс.

50% 1

In this video, I show how I replaced the rear brake pads and rotors on my 2014 BMW 335i. The process of changing the brake pads and brake rotors is fairly easy if you have all the right tools. Hopefully this video helps guide you through the process!
NOTE: I am not a certified mechanic or a professional. I do this for fun in my free time. Perform this job at your own risk!
PRODUCT LINKS
Rear Brake Pads www.fcpeuro.com/products/bmw-...
Rear Brake Rotor www.fcpeuro.com/products/bmw-...
Brake Pad Paste www.fcpeuro.com/products/bmw-...
Some Tools Used in the Video
Hex Bit Set amzn.to/3eailWZ
Socket Set amzn.to/2HGxEed
Torque Wrench amzn.to/37VTPaQ
Low Profile Jack amzn.to/3mAGiJS
Instagram: / e90hallenb
NOTE: Some of these links are affiliate links, which mean I earn a small commission if you order something from the link. This'll help this newly started channel!

Авто/Мото

Опубликовано:

30 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@understandthis4634 8 дней назад

Great video and thank you. Did know why the thread lock on the rotor bolt. Once torqued and the wheel over the rotor, the bolt will never come out.

@peytoncornett4547 3 года назад

Pro tip: make sure you parking brake is off! I thought my rotor was stuck but it was caught on the parking brake

@InlineSixAuto 3 года назад

Same thing actually happened to me lol.

@GrapeDaily 2 года назад

@@InlineSixAuto wish i saw this 3 hours ago 😟

@Imcheatcode 2 месяца назад

this feels like a master class. thank you

@cookiesareincenteroftheuni6971 2 года назад

You make this look very easy, thank you so much

@robinlantigua8141 3 года назад

Good info

@nationalistjanataparty9282 3 года назад

THANK YOU

@markherbs2130 2 года назад

your a lifesaver bro!! i was about to spend the 900-1000 bucks on getting them done at the dealer

@InlineSixAuto 2 года назад

Glad I could help!

@recklezz_9738 3 года назад

I recently replaced my rear pads and rotors but afterwards noticed my emergency brake felt a bit slack compared to how it felt previously. I plan on replacing my front pads and rotors over the weekend and will revisit the rear to try fix the issue. Any idea what i may have done wrong and how to correct it? Thanks in advance.

@InlineSixAuto 3 года назад

I think there is way to widen the pads a part of the e brake system on the inside of the rotor where it mounts onto the hub. I think you have turn a screw. I cant remember exactly. I also think it may not be as good because that protective layer that's on the surface of the rotors when you buy them brand new. After awhile i think it will rub off on the inside of the rotor where it makes contact and it will go back to having more grip on it.

@Roomooh_123 Год назад

Same for a 2015 bmw 335i ????? I’ve been looking for rear brake pads and rotors

@kullipetteri 3 года назад

In my f30 you need to take off the rubber cap over the brake bleeder lines to change the brake pad sensor. Would this let air into the brake lines when I take the rubber cap off, even if I dont press the brake pedal?

@InlineSixAuto 3 года назад

No because the bleeder screw is still closed. Air would only get into it if you opened the bleeder screw by turning it

@smoothlarryhughes 3 года назад

I've seen different specs for the rear torque than the front torque for the caliper bolts. I'll be doing my rear brakes and rotors this weekend on a 2016 320i xdrive. 81 ft lb for the front, but only 22 ft lb for the rear. Can you confirm?

@InlineSixAuto 3 года назад

I couldn’t get a consistent answer either so I just did the same as the front, 81ft lb, for the two bolts that secure the caliper bracket.

@miggy2225 2 года назад

Do these work with the M sport package? I have the M sport package but not sure if these will fit since you mentioned you originally had some for M sport and had to return them

@InlineSixAuto 2 года назад

The other ones I got were for if you have colored brembo brakes in the rear. These are for the calipers you see in the video. If you have the same rear caliper, then these will fit.

@ghxstbmws3397 3 года назад

Hey quick question are your front brakes considered m sport brakes yet they are 340x30mm instead of 370x30mm? I have the same front brakes and rears as you yet my car is considered an "m sport" and I need to replace all my rotors and brake pads but im struggling to find the correct size for my vehicle as certain sites say it won't fit an m sport since it isn't 370x30mm but I believe its the 340x30mm is the correct size for my car.

@InlineSixAuto 3 года назад

If they are the gray unpainted calipers it is 340x30 in the front and 330x20 in the rear. If you’re unsure it actually says what size rotors on the back side of your calipers. 370 is only for the painted calipers that were on the newer 340i’s I believe.

@InlineSixAuto 3 года назад

The code for the gray unpainted calipers is P337A

@shakurwaite7634 2 года назад

When u change your break pads? Do u have to also change the rotors?

@InlineSixAuto 2 года назад

No you don’t have too, but if the rotors start developing a little lip around the edge you should or get them resurfaced

@terrencevaughn1444 Год назад

When changing pads, do you have to replace the sensor wire every time?

@InlineSixAuto Год назад

It is recommended but it isn't required.

@adnanafzal6606 2 года назад

Its possible to do this without removing the caliper bracket, just have to turn the disc a bit and slide it into place

@thesharpshootersfl Год назад

Thank u 😊

@andre954 7 месяцев назад

I was going to change my rear rotors but I was told not to and it had to go into an computer to adjust , any idea what they meant? I can’t find a video yet

@InlineSixAuto 7 месяцев назад

Never heard of that being necessary lol.

@jfsndvl672 4 месяца назад

Once everything is done, you need to step the brake until it gets to the normal possition? Or you need to do something else?

@InlineSixAuto 4 месяца назад

Yes you’ll want to do that before you start driving

@thesharpshootersfl Год назад

My pads didn’t come with those clips ?

@the_ghost_of_cale_gundy 3 года назад

So 7mm hex on rear and 6mm on front??

@InlineSixAuto 3 года назад

I think you can use either sizes both should work. But the 7mm fits a bit better so you lessen the chance of rounding off the inside of the screw in the case that’s it’s really tight but if it was torqued to spec it shouldn’t be hard to break free.

@iamepimethus 3 года назад

I wouldn’t use thread locker on anything in my brakes. I’d use a small dab of anti seize if anything. Emphasis on small dab. The screw can’t go anywhere and really isn’t needed.

@InlineSixAuto 3 года назад

I would recommend it at least on the caliper bolts. I’ve had a caliper bolt somehow find a way to fall out on me while driving and had the front caliper hanging on by just the one not seated correctly.

@iamepimethus 3 года назад

@@InlineSixAuto wow!!! I’ve never had that happen fortunately!

@evondavid110 3 года назад

First here sweet

@trevorshields7347 2 года назад

Where you originally trying to tighten that caliper lol

@ks0z3 Год назад

don't forget eye protection next time... Especially with wire brush.

@christopherjefferson3561 3 года назад

Akebono are HORRIBLE for stopping. No dust tho. I went with mtech Pagids for 328i.

@InlineSixAuto 3 года назад

What you mean. They are fine for stopping.

@Roomooh_123 Год назад

Wait so the akebonos don’t fit the m sport ?

@InlineSixAuto Год назад

Wym? They fit I showed in the video

@alexisvillalobos3165 Год назад

@@InlineSixAuto sorry cause you said you ordered the wrong ones ? for m sport package but you dont have that the big brakes brembo lookin ones

@alexisvillalobos3165 Год назад

does that make sense ? lol my bad

@InlineSixAuto Год назад

@@alexisvillalobos3165 The initial ones I ordered were for the F30 models with the brembo M sport brakes in the rear. Mine doesn't have the Brembos in the rear as shown in the video. They use different type of pads.