Тёмный

BMW Motorcycle Exhaust Modification of BMW G310GS And G310R 🔥 

Argo Moto Riders
Подписаться 548
Просмотров 50 тыс.
50% 1

Hello Guys! Welcome to Red Dead Productions and in this video you will watch BMW G310GS And G310R Exhaust Modification or Debaffle.
▶️ Please SUBSCRIBE: / @argomotoriders
Unleash the maximum performance of your BMW G310GS And G310R and say goodbye to the sluggish stock fuel curve. With this modification you will enjoy quicker speeding extra performance level and torque.
Motorcycle exhaust sounds are unique, depending on the diameter, manufacturer, and material used to make the baffles. The pitch of the exhaust sound is a personal preference for most and can be altered as removable modification can be made to your motorcycle.
Most motorcycle owners would agree that the thrill of hearing your engine roar is half of the experience. But the type of exhaust and several other factors determine your modifications. There are also legal restrictions and regulations that are important to know while maintaining the sound quality of your motorcycle.
Even when a vehicle is well-made by the manufacturer, there may still be room for some improvements. This is especially true when it comes to horsepower and torque. Your vehicle’s manufacturer may have done a great job creating a safe and functional vehicle, but that doesn’t necessarily mean full optimization of the exhaust system. Installing custom exhaust systems is something that many vehicle owners end up doing.
An aftermarket exhaust system can unleash the full power of your engine. It can provide a quicker, more efficient route for the exhaust gases in your engine to escape, allowing the engine to breathe a bit easier. This means that more fuel and air can be burned within the engine and in the process, more power can be created. All in all, an aftermarket performance exhaust system can make for a system that allows the engine to perform at its peak. A simple mod. as discussed in this video MAY NOT provide as significant of an increase to the bottom line power as a full after market exhaust, it also avoids the high cost and re-fueling that may be required as well!
The main reason to consider an aftermarket exhaust system is this noteworthy improvement in power and performance. Another benefit of an aftermarket performance system is the deepening of the growl your acceleration makes. This more aggressive exhaust note is preferred by many vehicle enthusiasts, especially those who prize their vehicle for its horsepower and want an acceleration sound that can match it. This mod may not give you more power, but you will get that grunt which is sorely missing on the 310.
If you love my video please SUBSCRIBE and don't forget to press the bell, 🔔 like, comment and share.
------------------
▶️ Please SUBSCRIBE: / @argomotoriders
------------------
▶️For business enquiries: reddeadproductions8@gmail.com
------------------
▶️Other Videos:
• A Single Day on the WABDR: • A Single Day on the WA...
• Promo Vid - Old Hippies Charity Run 2021: • Promo Vid - Old Hippie...
• Paved Roads & PNW Single Track: • Paved Roads & PNW Sing...
• 3k Miles - Elma to Yellowstone and Back! Part 2: • Bears, Bison, and Bike...
------------------
#bmwmotorcycle #exhaustmodification #RedDeadProductions #motorcycleexhaust #modifyexhaustsound #bmwmotorrad #exhausttips #bmwg310gs #bmwg310r #exhaust

Развлечения

Опубликовано:

 

8 ноя 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 92   
@john196499
@john196499 3 года назад
Finally I found a USA BMW 310 GS video.
@ericswild
@ericswild Год назад
Love the couch in the garage!
@embededzeus
@embededzeus 2 года назад
Sounds a lot cooler... thank you for sharing this... is there another video where you have compared the performance?
@NativeNepal
@NativeNepal 3 года назад
woow you guys know the real trick ....thanks
@dafawty9thstate830
@dafawty9thstate830 Год назад
Wow, I love it! I'm in Alaska and I bought a BMW 310 gs in Cali, Colombia several weeks ago, brand new. Flying down in a few days, then I can get to the dealer and pick it up. I'm taking my riding gear and some initial upgrades to add to the bike, but I'll have to wait on the big stuff that I really want. Like an exhaust, more off road capable tires, Rally Raid suspension upgrades and spoke wheels. I'm bringing down pretty much everything else, I wanted.
@NapatsNapar
@NapatsNapar 3 года назад
THX Bro
@christinegrahsl4609
@christinegrahsl4609 2 года назад
Cool thx
@bharathmedala
@bharathmedala 3 года назад
Wow what a hack you guys rock..
@Ananthurnath
@Ananthurnath 3 года назад
@Red Dead Productions can you tell me whats the reading on the DB meter , may be using an android/iPhone app
@jeshimshrestha6092
@jeshimshrestha6092 3 года назад
I love ur logo❤❤
@argomotoriders
@argomotoriders 3 года назад
Thanks man appreciate the hell out of that.
@aliciapaxson1006
@aliciapaxson1006 Год назад
Thanks! What other mods did you do to the g310 GS?
@hails.h9000
@hails.h9000 2 года назад
Hi what size drill bit did you use last ? Thanks for video
@happyman8488
@happyman8488 3 года назад
Done same thing on my g310 R. Love the sound, not too loud and power feels good.
@Ananthurnath
@Ananthurnath 3 года назад
can you tell me whats the reading on the DB meter , may be using an android/iPhone app
@happyman8488
@happyman8488 3 года назад
@@Ananthurnath sorry can't tell. It's a bit louder than stock. Would def still be legal on South african roads. I drilled 6 , 12 mm holes in mine. Start by drilling 3 holes and increase if you want more sound. I run a BMC high flow filter in mine too. My efi handles it well and bike pulls strong with no popping or backfiring.
@James356-b1m
@James356-b1m Год назад
@@happyman8488 did you make the same hole as shown in the video brother?
@happyman8488
@happyman8488 Год назад
@@James356-b1m at first I did ,yes, but the bike had an unpleasant sound as the air moved past the holes. I did not like the sound so I removed the whole db killer pipe. It bypasses the whole CAT system and gets air out faster. Try bmc high flow filter with your modded pipe. The bike runs much better. Here in South Africa we worry more about being murdered than pollution and noisy pipes so check your laws before you mod it.
@James356-b1m
@James356-b1m Год назад
@@happyman8488 yeah it's not totally legal but I really wanted to ride without db killer even I have to pay the fine. last question. brother- Can we do welding the db killer back to the exhaust again..? or once we take out its done.?
@happyman8488
@happyman8488 3 года назад
I went a step further and took a 51 mm hole saw and drilled around the weld of the small outlet pipe. I then removed the whole db killer assembly pipe. It took a pipe wrench and some wrestling to get it out. Now it has a deap crisp sound like a mx bike but not as loud. Bike does not pop on decel or run lean, even with BMC high flow filter. It beats my friend's standard g 310 in race.
@angelocb18
@angelocb18 2 года назад
Did the same love the sound
@bfarm44
@bfarm44 2 года назад
That’s what I was thinking just yeet the entire plug
@James356-b1m
@James356-b1m Год назад
Can you give me your instagram so that you can show me where did you drill the hole
@happyman8488
@happyman8488 Год назад
@@James356-b1m remove shiny steal cover on end of pipe and simply take whole saw and drill around decibel killer circumference. This will loosen the entire pipe that you want to remove. Pull it out by some force. It is pressed in so just pull while wiggling it, it will come.
@James356-b1m
@James356-b1m Год назад
@@happyman8488 thank you brother appreciated
@TheRednav1
@TheRednav1 2 года назад
Think I'll try this, but also build a plate I can bolt over the holes to cover them up, in case I don't like it, or need to bring it in for warranty work without them figuring out I modified it.
@tomkoop5806
@tomkoop5806 Год назад
Hi guys , can I get some info on swapping The bars and what those red bars are , cheers
@azaad9153
@azaad9153 3 года назад
Done n love it . Thanks
@sergiovelasquez6549
@sergiovelasquez6549 3 года назад
What size bit did you use last?
@azaad9153
@azaad9153 3 года назад
A size smaller then they used in the video and only 2 drills
@lordniko1986
@lordniko1986 3 года назад
did anything get sucked up to the cilinder?, i mean the residue of the drilling?
@drsanilkumar3766
@drsanilkumar3766 2 года назад
What size bits for holes
@azaad9153
@azaad9153 2 года назад
@@lordniko1986 na it didn't
@varunkg4779
@varunkg4779 3 года назад
Its like you install a free flow pipe instead and am worried about the compression inside the cylinder, does it varie and does it affects the engine life??
@argomotoriders
@argomotoriders 3 года назад
It is a bit like that yes, but not nearly as free flowing as a true exhaust. Additionally we did not adjust intake, and so to my understanding the actual fuel mapping change is small, or at least small enough for the stock ECU to map it. Long story short I do not get much if any popping on deaccel
@vivekalagarsamy7339
@vivekalagarsamy7339 3 года назад
He and his goggles 🤣🤣
@williecolon9678
@williecolon9678 Год назад
Why didnt you have a shop vac handy to suck up the shaving while you were drilling?
@smookydreamsintes1996
@smookydreamsintes1996 6 месяцев назад
I have one but and I want to try this but I’m afraid of losing the guaranty, does this affect the guaranty?
@Creature_Covers
@Creature_Covers Год назад
@reddeadproductions after 2 years, what's the status of the bikes? I'm thinking of doing the same on my G310R. I would like to know the long-term effects if any. Thanks
@coreygoat86
@coreygoat86 Год назад
We have sold them both but I kept mine until about a month ago. No problems ever coming from this. I’d do it again!
@gunner4375
@gunner4375 3 года назад
My 3 year warranty will be up soon then I am will try this!
@victorlopes9429
@victorlopes9429 9 месяцев назад
I do it during my 3 years warranty and keep warranty no problemas in BMW!
@ryanniksch4174
@ryanniksch4174 10 месяцев назад
what impact did this have on fuel consumption?
@sanjeevlal4285
@sanjeevlal4285 3 года назад
Is this safe to do with my new bmwg310r or buy after market exhaust? Plz suggest me....
@argomotoriders
@argomotoriders 3 года назад
From our experiences this doesnt hurt it at all. However not all shops will like it, like at all. So you might have issues for warranty work around the exhaust parts especially. Point being do any mods to your bike fulling expecting it to void your warranty.
@drsanilkumar3766
@drsanilkumar3766 2 года назад
What are the sizes of drilling bits I wanna try it
@MohPlus
@MohPlus 2 года назад
5mm
@Hzzziq
@Hzzziq 2 года назад
Can I like just drill 2 holes instead of 4?
@swimwithcoachraven1532
@swimwithcoachraven1532 3 года назад
What problem would you foresee in a bike like this. Think of getting one
@argomotoriders
@argomotoriders 3 года назад
Depends on what you are looking for, but, the new ones (2021+) appear to have addressed my biggest gripe which is the clutch. Suspension is not up to the task if you push it at all, but honestly get it and rip it brother
@SlavaBron
@SlavaBron 8 месяцев назад
What is the diameter of the drill?
@her_jonsy
@her_jonsy Год назад
Bum exhaust
@marco8526
@marco8526 3 года назад
Any problems so far??? Do you have any video on the road to hear what it sounds like...?
@argomotoriders
@argomotoriders 3 года назад
Well I mean i've broken a fair bit of shit off from dropper her, but it still fires right up. My clutch squeals a bit and this seems to be fairy common. The blue bike is like its new off the showroom floor, but then its barely ridden.
@Ananthurnath
@Ananthurnath 3 года назад
@@argomotoriders can you tell me whats the reading on the DB meter , may be using an android/iPhone app
@lawranger
@lawranger 3 года назад
How are the Bikes on long trips? Looking at the 310GS, but may go with the 750 GS.
@GusDaCosta
@GusDaCosta 3 года назад
I have a 310 GS and i'd recommend getting the 750 if you are going to do a lot of highway.
@coreygoat86
@coreygoat86 2 года назад
So we (this is stuttering mechanic “goat”) made these bikes work well on the open road. We just came back over hwy 90 (mountains) pulling 75-80 mph with no problems. Just cannot be afraid to toss a little money at. That being said, total bike investment is still around $8000ish. For a bike that can do single track as well as pull mountain passes at 80mph
@sergiovelasquez6549
@sergiovelasquez6549 3 года назад
What size bit for final hole?
@MohPlus
@MohPlus 3 года назад
Maybe 5mm
@sergiovelasquez6549
@sergiovelasquez6549 3 года назад
@@MohPlus cool thanks
@abelcatalan33
@abelcatalan33 2 месяца назад
Any problem after all this time?
@ShoaibKhan2022
@ShoaibKhan2022 3 месяца назад
MY BIKE CUTS OFF NOW AT 5000 RPM. WHAT SHOULD I DO
@naveshmaharaj
@naveshmaharaj Год назад
Did this on my BMW g310r and much better performance and exhaust tone.
@davimoreirajoca
@davimoreirajoca 2 года назад
I just bought a G310R and I really wanna change my exhaust but none of those in the market r great enought... If i do this trick i'll have issues only with the exhaust or the entire bike? i'm pretty confident this is the best we can get with that engine.
@argomotoriders
@argomotoriders 2 года назад
You should'nt have issues with anything, and I do not get anything other then very minor backfiring when cold.
@drsanilkumar3766
@drsanilkumar3766 2 года назад
Hi I tried this and while drilling 4th hole my drill bit broke and it's in the silencer does this do any harm to engine or other parts what to do now just leave it or remove it pls suggest
@karankots
@karankots 2 года назад
Remove the pipe get the residues out and instal it back
@thetechtrolltube
@thetechtrolltube 4 месяца назад
Will it void the 3 year warranty?
@RuciosDubstepMixs
@RuciosDubstepMixs 2 года назад
Why not remove the exhaust real fast and dump the metal shavings out ?
@motoaway7591
@motoaway7591 3 года назад
Can you do a drive by video?
@argomotoriders
@argomotoriders 3 года назад
I don't know if we have a stock drive by, but we will get one with the debaffle up here shortly.
@peterweise7334
@peterweise7334 2 года назад
@@argomotoriders liar
@itz_frzeroadto200subs4
@itz_frzeroadto200subs4 Год назад
@@peterweise7334 HAHAHAH
@MiCiNpk
@MiCiNpk 8 месяцев назад
4:53 1:28
@toddstevens8506
@toddstevens8506 3 года назад
Stock sounded better, drilled example sounded like a lawnmower.
@argomotoriders
@argomotoriders 3 года назад
Sounds better on the bike for sure, but again wasn't done necessarily just for the sound...
@coreygoat86
@coreygoat86 2 года назад
I highly recommend that you do not do it, if you don’t like the sound. No need to spread hate
@toddstevens8506
@toddstevens8506 2 года назад
@@coreygoat86 We're talking about motorcycle exhausts, hardly a topic that instills hate.
@dnzy4613
@dnzy4613 2 года назад
Take off the db killer its much better
@wilfredocampo4215
@wilfredocampo4215 Год назад
How can you take the db killer off?
@dnzy4613
@dnzy4613 Год назад
@@wilfredocampo4215 drill it out
@dnzy4613
@dnzy4613 Год назад
@@wilfredocampo4215 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DO_1nBPrwH8.html same engine same exhaust.
@excelsismusic7922
@excelsismusic7922 2 года назад
Man, it sound horrible after mod. Get at east 600 for performance and sound.
@joshs.5623
@joshs.5623 2 года назад
Just wasted 5 minutes of my life....
Далее
2DROTS vs WYLSACOM! КУБОК ФИФЕРОВ 1 ТУР
07:25
D3 BMW XM LABEL Король.
31:52
Просмотров 797 тыс.
What you need to upgrade on the BMW G310GS
2:06
Просмотров 31 тыс.
BMW G310 with AkRAPOVIC full System exhaust
13:47
Просмотров 54 тыс.
This or That 🛍️
0:52
Просмотров 9 млн
ЖВАЧКИ!!!
0:47
Просмотров 3,4 млн
Пранк пошел не по плану…🥲
0:59