BMW R1200GS 2007 LED Headlight and Turn Signals 

Thank you. Your video gave me the little confidence I needed to this job myself and save not only money but time. My LED replacement was also from e-bay but did not come with the protective plate or all the rubber grommets needed for installation. Had to remove the old ones, tore one but it remained serviceable. A process but well worth it and your video was instrumental in my decision to do it myself in about a half hour of work. Thanks! BTW, my bike is a 2009 R1200GSA.

I returned from the BMWRA Rally 4 am, until Dawn, on interstate 40. That LED WORKED GREAT! I’ve always been anxious about Road debris, but all the light remedied that!!

Well all need these LEDs for safety and a modern look. Great work and video.

Hello, i guess I owed you an explination regarding turnsignals error, fast blinking. Prior to owning the R1200GS I've owned an 2008 F800GS and bought for that bike led turnsignals but dind't installed them. So I swapped the old ones with the fast blinking from the R, put the F800 ones in and problem solved :). No dash error and no fast blinking.

Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides

Top guy - a great instructional video. You have gone the extra mile by sending me your unique spacer.. Thank You😀😀

Really Amazing !! This headlight transform this bike!!

Thank you, very informative Excellent mod

Thank you so much for the patient instruction on completing this task, for I bought the same headlight for my 2006 GSA! I haven't completed it, just studying. I see that my wires are black white and yellow and the parking light * I suppose* is red. Don't see where it attaches. But, removal of the instrument cluster, etc., are what I needed to see!! Thanks so much.

Sérgio, many thanks for your support & the file for 3D print of the spacer - works perfect for me!👍🏻👍🏻👍🏻

A top man and a great help with fitting my headlight that was too high...made the installation very easy with this great video thank you and keep up the great work 👌

Thank you for this video: i just finished the upgrade of my R1200GS from 2009 white watching it. I just need to watch how to do the light level adjustment, and it’s fully done. 🏍🤙🏼

Thank you very much for your brilliant video and for sharing your experiences with the LED conversion. I recently bought a similar headlight, and I have the same issue with the instability due to the bottom fixing point. I am very impressed with your engineering skills and ability to "just" create the part, you needed. I tried designing something similar with a Stanley knife and some rubber - not as successful as yours ;-) Therefore I have send you an email kindly requesting the 3D print file. I hope you're still able to share it. Thanks again! B/R Esben

Thank you Sergio for this great vid and sending me your spacer for the headlight! Awesome

tq for your vid.This Beast still legend and the best

Nice vid. Thinking about this upgrade also. Like the big hammer on your workbench for the minimum required toolset...

Very good and informative video definitely be converting my front lights to led

I'm really surprised that a $150 lighting kit off Aliexpress doesn't make the BMW computer throw up error codes. Since it doesn't, this seems like a fun upgrade. BTW, I find installing and removing big rubber grommets easier if you squirt them with some silicone lubricant first. If you don't have access to a 3d printer you could probably fill the space with JBWeld.

thanks for the awesome guide!

Awesome...looking forward to any developments you have with a vertical adjuster...

A ideia do espaçador está incrível... as voltas que dei à cabeça para perceber como poderia fazer para resolver a questão da folga da borracha do Farol... E mais uma vez, obrigado pela disponibilidade para fornecer o ficheiro e o espaçador. Cumprimentos do norte e sucesso para o canal. Luis Coelho

Great video! Thanks 😁👍🏻 looks so much better!

Bro u are a great person!

Great video. Helped sooo much with the install !!

Loved your video, man!

Show o vídeo bem explicado!!! Abraço amigo direito do Brazil.....

Thx for the detailed instructions. Maybe you could upload the stl-file of the spacer?

Hi I have received the printed gadget for my LED headlight it fits fine many thanks ...

Nice job Man really Pro

Great job

Hey there! as far as I know you can program the bmw unit so it will work with led blinkers, no need to add resistors 😉

Nice Video !

Hi, after a long search i finally came across your video with a solution for the vibration, perfect. Can you please send me the SDL file?

Super movie. A few days ago I received a led lamp for BMW 1200gs 2009. But unfortunately it arrived with a damaged meter base mount and I need to fix it

Seems like a major design flaw that the LED headlight housing doesn't have any provision to aim the beam. There's no point in having a brighter light if it's not shining in the right place.

Hi, you made a really useful video. Congratulation. It helps a lot for the headlight conversion. Do you have the stl. or some other file extension to print that spacer? It will be really helpful I think if you can share with us. Thanks

I am looking to make the up grade with this new led head light but at the same time I was kind of scare to end up with a mess. Your video instade show clearly the work to be done and how to be done. The difference is that you are a pro and I an amatorial 😅😅! One thing I need from you if it is possible, to buy the 3D spacer from you. I have a 1200 adv 2006, I think that would be same to moto. Look for your kind reply and really great job 👏👏

Great video! I`m more confident now in making the change for my 2009 GS. will be really helpful if you could send me the spacer file. many thanks!

Thank you for your nice video. With the help of your video I was also able to exchange my headlight (r1200GS 2012) for a LED one. I do have the problem that it keeps moving, so if you could help me with the file for the 3D print.

Thanks for the video. Just sent you an email asking for the file, hope you still have it somewhere.

Great Video - looks simple to fit! I'm waiting to receive the unit from China but would appreciate if you could send your 3D STL file?

Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?

Great video really enjoyed very helpfully, are u still enjoying the led head light ?

Hello my friend. I would have liked to have your spacer. How to contact you? Thank you for this great video!

Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!

Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?

Hello friend, I think your video on installing the LED lamp for the BMW K25 is great. I've bought the lamp and I'm having an issue with vibration, could you please help me with the file for 3D printing? Greetings from Colombia.

Hi man! Great video! Could you send me the spacer file? Thx man!

Hey mate. Greetings from Australia. Just bought the same head unit will be fitting it tomorrow. Thanks for the help. Do you sell those spacers? Or would you share the file for 3d printing? Loving the channel.. Thanks mate. D

Excelente vídeo e explicação. Estou tentado a instalar um igual na minha GS de 2009, seria possível disponibilizar-me o ficheiro do espaçador ? Obrigado

Hi, just received my new headlight. Can I get a spacer from you?

Brilliant job! Thank you. Do you have the link where I can buy one of them?

Hi once I fitted mine I needed to adjust i as the beem is too low, how do I do this or are they fixed.? Thanks

Hi , love the videos .. just wondering have you fitted the resistors for the indicators yet ?

Hi, friend. I bought a headlight from China like yours. Very low light. Can you file please.

Nice Video! I also bought the LED Headlamp, but it wiggles aswell. I hope you could sent me the File, so I can print it myself. I just sent you an E-Mail. Clever people helping others with clever ideas ;)

Olá efectuei a mesma alteração que VC fez mas o farol treme muito será que há a possibilidade de me fazer uma anilha igual á sua e eu pago todos os custos

Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...

Very good vídeo. Puedes mandarme el fichero para imprimir la pieza 3D? Obrigado.

Hi i need the stl file for the spacer Thanks!!!!

Hello, nice job. Is it possible to get the stl-file for the spacer? Some wishes from germany Leo

Thank you for this awesome video! I send you an email so if you can send me the stl file! Keep on the great job!

Muito bom!

I need to get in contact with U I need a piece on 3D print that you might be able to help me as I saw this great video I imagine you kan do it

What a great video! I also bought one. Can I buy the spacer from you? I don't have a 3d printer myself :)

Hi great video how do you fix the fast blinking turn signal?

Could I have the stl file? Thank you

Nice video. Could you tell me who makes your upper tank guard bars?

Super great videos, thank's to you a buy one too. Can you share the file with the plastic piece to print it with an 3D printer ? Thank's !

Hello, can I mount this headlight on a K100 from 1985 ? I turned it into a scrambler

Thank you for a great video. I have same issue with the headlight shaking. It would be great help if you can share the stl file for the spacer. How can i get that from you? Thanks in advance!

Nice video. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer.

Brother i hope u can help me, i buy the same headlight it came today but my conection wires dont fit on my bikes i can sent u a picture?

I just watch your video about the new light on yoursBMW 2007 was it any good did it do the job very good please can you let me know Terry

Hello, i just did my own led light. Step by step withe this awesume vid! But did you fix the turn signals. So that thee will blink normal speed?

Hey can you send the link for the front headlight assembly?!

Hi. What a great detailed video description. Thank you for the information. I subscribed. From South Africa. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer. I am looking forward to your next videos.

Hello, So I did this job on my 2008 R1200GS and now I have the same issue with the turn signals. Can you please let my know what resistors did you use to remove the error from dash and stop the fast blinking? Many thanks for you time

What about headlamp conversions for K1300R 2014? Seen K1300R replacements but also R1300GS[?] conversion for K1300R, too. Any experience with that?

I’ll take the headlight protection please

What brand of crash bar is that ? Great video 👍

hey is your computer give a warning ? after running the new led light .

Hi. What cash bars usted you motorcycle... after the change lights, the desk or computer show error on diplay?

Thanks for sharing. I bought it! How can I contact with you about that little plastic part?

what crash bars are they? they are amazing, btw I fixed that bottom issue of the headlight moving by cable tying that rubber Gromit from both sides so it stays put, worked perfectly

Hello, where can I buy the piece that you have made to hold the headlight so that it does not move?

If possible, I would also like to get a file with a 3d model. Can you send it to me?

Hi, can you tell me the dimensions of that small piece? Or send me the file so i can print it?

Is iy possible for you to send me the stl file ❤

Hallo, can i have The file. Pleas

Amazing! How can I get the file for 3D printing?

nao tiveste alertas no ecran a respeito dos LED ? queria fazer algo semelhante, mas a idea de ter o alarma me tem colocado de pe atras. ..... i piscar rapido se resolve com a resistencia, a minha preocupacao sera mesmo o triangulo no ecran

Hey! Thank you for the video! now i want a headlight like that too. can you send me the stl file? I'll be very thankful

It's the same model year bike, but with the headlamps, the fuel gauge doesn't work, and the fuel warning light works. Do you know the solution?

Where did you get the turn signals. I got a 2007 GSA already with the LED headlight but would like to upgrade the turn signals

Where can i buy this one & how much ?

Looks great but dose it put a bulb warning for the headlight ?

sorry, but can you adjust the light according to the weight on the bike as you do with the original headlight?

I have a 2004 1200 GS. Can I fit these onto this bike?

How is it holding up after 3 years (headlight)?