In this video i replace the rear Bushing (Ball joint) on a Bmw 5 series. Enjoy the video! Check out Cody's channel channel; / @codysautodiagnosticsp... For Business inquiries; Diagnosedan@gmail.com Join me on Facebook!
Mate...you are Michael Jackson of mechanics..simply entertaining at its best...this is purely old school wrenching taken at entertainment level..like watching a good movie
Dan . what can I say... Ive had my BMW 530d for 8 yrs. Ive watched countless youtube vids about replacing various parts. You have the GIFT my friend. You leave the rest behind. Thank you for your clarity and expertise
When I was 13 years old began working at my dads tire shop. We were taught always tighten lug nuts using a star pattern. Did that method change? I love the video. I learned how to remove and replace these type bushing with a specialty tool I didn’t know existed. Thanks for all you do Dan!
Personally and I do not want to pick at the work yes I agree with the practice of as you put it a star pattern to tighten a wheel. It prevents the wheel snagging at an angle. I also think the snap on electric gun if you check in fact over tightens the wheel bolts even with only letting it dugga dugga a couple of times, they are far to powerful on bolts like that. The torque check at the end ought to have tightened the wheel bolts up more to the correct tightness. It only clicked due to it being at the correct tightness or beyond it already. From my experience it will nearly always be too tight. I would also recommend to the customer we did 4 wheel alignment although it was marked. If the customer declines then a premature worn tyre is not able to be blamed on us. Still enjoyed the content as always don't like to knock what you do just feel it is always good to get feedback whichever way it is.
I don't work on to many European cars right now, but watching you I feel more comfortable dealing with them. There is only one shop around here that works on them and since the owner passed away they haven't been the same. My customers that do own them are very patient and don't want anyone else working on there car including the dealerships in New Orleans 60 miles away. Yes definitely more videos on mechanical repairs, and diagnostics, maybe more videos per week, although I know it takes a lot of time especially with the great video quality you produce. Thank you for taking time to make these videos they are greatly Appreciated!
Diagnose Dan Fixed it Again now Diagnose Dan Wrenchin’ Again... Great teaching and content A+ This channel continues to be a stand out in its technical field.
Where have you been? No diagnostic videos posted for many months. Great to see you back. I was surprised that you didn't spray penetrating oil on the threads before you loosened the bolts, and also that you tightened the wheel bolts clockwise, rather than doing the opposites, ie 5, 2, 4, 1, 3 on a 5 stud wheel. The torque wrench just showed the wheel bolts were tight, but the airgun might have over tightened them firstly. Electric cars aren't selling well in the UK, so it's good that you stopped making videos about repairing them. Great work, thanks.
Brilliant video, thanks Dan. It’s great to see mechanical repairs performed and explained with the same clarity as your diagnostic videos. This makes the work so much easier for those who find repairs daunting. I really enjoy your Chanel.
DiagnoseDan you never cease to amaze, there are so many types of diagnostic work. And parts changers would tell you that you need a new hub. Great video. Eric O would have to break out the torch because of the rust lol.
Another great video Dan! Even if you think they are common or regular servicing items, because people do it differently, there's always something new to learn or new discovery to be made. For instance, on this video that plastic rotating brush fitment to clean the aluminium part was a really good tip. In conjunction with giving a once over regarding the importance of SST (Special Service Tool) in certain tasks will educate young mechanics and DIYers - extremely vital and very basic but often overlooked. Many thanks once again for your excellent work and generosity in sharing the vital knowledge with us.
THANK GOD they put that snap ring into place, to hold that ball joint in!! That way, the corrosion, and the unimaginable forces wouldn't be overworked!! Nice one Dan, thanks for sharing!
Mechanical repair is interesting to me. I like the variety. I’ve admired your electrical diagnostic ability. This shows that you are very well rounded in your skills. I think that you and Eric O came from the same mold.
Nice to watch a mechanic that does not get scared of a repair job just because it is one of those "Fancy" brands BMW. I own a BMW myself and do my own work on it. It is not a NASA science project to work on but you do have to sit down and be willing to learn how it operates. Good job and i am looking forward to watch more mechanic videos from you in the future :)
This guy shows the BEST video on replacing rose bushing - too easy - Thanks DAN - I was afraid to do it until I saw it - CTA 8692 works great for this bushing
This one really gave you a workout! Great to see the professor getting his hands dirty so to speak. 😁 Your hole cleaning techniques are also spot on! 😂
I’ve just watched a video of a guy struggle on the floor to do this repair. As I’ve worked many years as a mechanic on the floor doing it with it in the air using good tools man is that so easy excellent video 👍🏻😉🙏🏻
This reminds me from when I had to replace the rear wheel bearings on my E36 318i and getting one of the driveshafts out of the hub was the hardest part. Changing the bearings was the easy part. It always reassures me when the wheel nuts are torqued up properly with a torque wrench and is more important with alloy wheels.
Great video dan and nice to see it done properly! I've seen countless mechanics/technicians over the years tighten bolts with the suspension hanging down in the unloaded position . This is OK for the bush you've just replaced as it's more like a ball joint but not for the rubber type bushes which you know will fail again in a very short period! Once again a great video and nice to see it done correctly.👏
Its good to see Danny isn't afraid to get his hands dirty with the basic stuff. You should be a tutor at a Polytech Danny. No, wait, how am I gunna learn from you then? Great stuff as usual.
I was surprised to see you didn't use the ratcheting wrench on the removal part! I replaced all rear 8 bushings on my e90 and didn't have the 24mm ratcheting wrench at the time, so the removal and reinstallation took some time. I watched the entire video and didn't even need to, Lol. I think this came up as a result of watching one of your previous diagnostic videos. You explain what you are doing very well! Good stuff! New Subscriber. Thank you!
Excellent video how to do this bushing change, without having to change the whole suspension on the car !!! Quality guy doing quality work with excellent explanations.
Very well made video. Clear and to the point. With a steel joint in aluminum control arm I would use a heat gun to make removal and installation easier. Aluminum expanding much more than steel makes it very effective. In addition I would place the new bushings in a freezer to further increase temperature difference.
I was going to comment on the lack of star pattern tightening but I see you have been berated enough on that. I guess my reason for commenting was that I am always in awe of your abilities and the way you explain your diagnosis , so when a "mistake" like that happens (You probably usually get the apprentice to do tyres) everyone jumps for joy! ha ha , "we caught the King making a boo boo!" Keep up the great video's and I feel repair video's are another feather in your cap!
Really an excellent video showing the job replacement as much as can be, with tips and widely explanations about every step taken. I enjoyed it. Thanks Cody.
Nice! Representing Cody's Auto Diagnostics! Hopefully we can get you over here to visit one day, one of our training events. 😉😉 Awesome to see the day to day Dan at work, and turning wrenches! You make it look too easy! 😂😂😊😊
The mechanical videos are really good too! Love to watch other mechanics work, always seem to come away with new tips and tricks (like that plastic cleaning brush), so thank-you for that!
Hi Dan, this is great to see. I reckon your videos are better than Wheeler Dealers, you deserve a greater following. Anybody who is a car fanatic will learn from your videos. Thank you.
Great vid!! With your diagnostic skills, it's easy for some to think your just a braniac. When I was first watching your vids u said u wore out a few Milwaukee 12 volt ratchets. I said to myself, sure he did. But now I actually believe u. When we're not watching, I know u just rattle on those lug nuts with your impact. What tech doesn't know his impact? Really enjoy the repair vids too!! Cool rack!!
You go out of your way to get a good view. Hands down a subject matter expert. Would love more videos also! You should have a million subscribers EASY. 🤷♂️😂
Dan your videos are outstanding. The camera work is outstanding and the way you describe what you are doing is excellent. Oh and by the way the shirt is perfect. Cody’s videos are also excellent. Have a good one Dan ❤️
Love the German they make suspension work so easy even with thier 8 control arms 🤣 nice to see you representing Cody. Great video Dan looking forward to more repair vids... jay
I work on German industrial equipment and when I comes to hammer they are a huge no no no no no they have jacking bolts, presses, or your hands for that stuff. I learned my BMW’s are the same way no hammering but the dodge and jeeps get a bigger hammer. Fire for the ford in the field lmao. Thank you for the video and educational.
What an incredible diagnostician you are. A great dad as well. May I humbly suggest that you use eye and ear protection when you use power tools? At 55 years old, I have tinnitus (constant ringing in my ears) from all of the shop noise during my days. Be well and thank you for all of the entertaining lessons.
A new style repair solution appear on DiagnoseDan channel,diagnosis + mechanical will reach more people. But it also spend more time to make and edit this video. Thanks for sharing,Come on Dan!
Nice work Dan. Would like to see more repair videos on the (7) series BMW. I Own a 2006 BMW 760i Nice Car- but very complex. It has (5) Computers just to control the Engine alone. I perform most of the repairs- but need assistance sometimes.
Great video Dan to much work lol . Would of had to step up to half inch racket with long handle and deep well socket . I'm getting to old for the bull work . Did enjoy you adding some of the other shop related repairs though . Dan fixed it again , keep them coming .
top quality work .. good extractor / puller . Not a possible job without the right tools . Easy job with the correct extractor . That is what the customer pays for .. Having the right kit for the job .
