Тёмный
No video :(

BMW Rear Subframe Bushing DIY - Polyurethane Bushings 

Salt City Euros
Подписаться 10 тыс.
Просмотров 8 тыс.
50% 1

In this video I am going to walk you guys through how to remove and replace your rear subframe bushings on your BMW E30 WITOUT removing the entire rear subframe. Keep in mind that the process that I show here is NOT the official, BMW recommended way to do it. I am using no press/puller, and hand tools only. This is intended to be an addition to the already existing wealth of information out there on this procedure, as well as compliment the many excellent videos on RU-vid that cover this process.
Please be careful when working on cars by yourself, especially when doing something that requires a lot of force to remove parts when on jackstands/jacks.
As always, happy wrenching!
+ Link to Garagistic rear subframe bushings +
www.garagistic...
+ Link to rear subframe BMW tools +
www.bimmerworl...
+ Link to Blake's Rear Subframe Video +
• E30 REAR SUBFRAME REMO...
+ Shirts Available for purchase here: +
teespring.com/...
+Social Media Links+
Facebook @SaltCityEuros
Instagram @SaltCityEuros
+Music Credits+
Distrion & Electro-Light - Rubik [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Electro-Lig...
Music provided by Free Music Tunes
Track: Nate Good - Down In Flames
Link ► • Nate Good - Down In Fl...
Sappheiros - Time Stands Still [ Creative Commons, Chillstep, Sad ]
Link: • TIK TOK [ FREE USE ] -...
Diamond Eyes - Flutter [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Diamond Eyes - Flutter...
Free Download / Stream: ncs.io/FlutterYO
Unknown Brain - Say Goodbye (ft. Marvin Divine) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Unknown Brain - Say Go...
Free Download / Stream: ncs.io/SayGoodbye
Disclaimer:
We are NOT professionals and therefore cannot guarantee against improper use or unauthorized modifications of this information. SCE assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. We always recommend safe practices when working on vehicles and or with tools in general. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not SCE.

Опубликовано:

 

15 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 28   
@user-qp8lt3yb6t
@user-qp8lt3yb6t 6 месяцев назад
Your vid was extremely helpful, I found a way to remove the old bushings. I put a 30mm deep socket between the bussing and the car, then put the floor jack under the subframe lifting the car off the stand. Then heated the housing. Old bushing came loose and fell on the floor. Thanks again for your vid.
@Erikson.Frederick
@Erikson.Frederick 3 года назад
Interesting way of replacing them. I removed my entire rear and cleaned up the subframe and welded in adjustable camber/toe tabs.
@SaltCityEuros
@SaltCityEuros 3 года назад
Yeah I will actually be taking out the subframe this winter for that same reason. But not everyone does that, hence I figured it could be helpful to some to show it done this way
@e30mane
@e30mane 3 года назад
Good to see another vid! Looking forward to more e28 content
@sebastianpodhorodecki4193
@sebastianpodhorodecki4193 3 года назад
Another dope video as always 🤙 Wish nobody helps you, i was hoping for Mat to keep doing videos with you
@unixnerd23
@unixnerd23 3 года назад
Garage once failed my E30's MoT due to bad subframe bushings. So I went down, we went under the car and I showed them not just that the bushings were OK but the four digit production date said they were 10 months old and I'd done them. Trying to rip me off! Never went back.
@Dildology
@Dildology 3 года назад
Film the land cruiser please
@garagistic
@garagistic 7 месяцев назад
@brendenserna480
@brendenserna480 3 года назад
No grease on those poly bushings! About to be Squeak City Euros!
@alpineweissm7501
@alpineweissm7501 3 года назад
The rear subframe bushings don’t move enough to squeak, I know from experience
@SaltCityEuros
@SaltCityEuros 3 года назад
I don’t think these need to be lubed up, there is very little, if any, movement in those bushings. At least they didn’t come with any lube unlike their trailing arm bushings which do come with lube.
@alpineweissm7501
@alpineweissm7501 3 года назад
@@SaltCityEuros I agree
@mehmetkaratas2929
@mehmetkaratas2929 3 года назад
Ein Feedback, wenn du wieder auf der Straße bist, würde mich interessieren. Beste Grüße aus Rosenheim, mach weiter so! 👍🏻
@lucasrittinge30
@lucasrittinge30 3 года назад
Sperber classic hat für den e30 Schrauben Sätze fürs Fahrwerk und für ein paar Motoren zb m20.
@TheCabillaud94
@TheCabillaud94 3 года назад
Why are there old French plates in the background ?
@colinstu
@colinstu 3 года назад
no PTFE grease put on the bushings? isn't it going to squeak like crazy? man this is a total 180 compared to my experience. The top of the huge bolts had this caulk type stuff on the top of them, all of that had to be dug out before I could even knock the bolts up/out. After that I had to drop everything out, and the metal sleeves in the bushings both snapped as they welded/corroded themselves to the body. I had to drill and grind all the remnants out, and only then could I bring everything back up. What a mess.
@SaltCityEuros
@SaltCityEuros 3 года назад
Sounds like a crazy experience. I’ve seen these go wrong in all sorts of ways as well, luckily I didn’t have too many issues. But yes no grease needed on these there is next to no movement in these bushings
@mobiledevto
@mobiledevto 3 года назад
weld on a nut on backside of bolt to be able to continue the broken bolt thru.
@SaltCityEuros
@SaltCityEuros 3 года назад
What do you mean by that? Can you explain more? Thanks!
@mobiledevto
@mobiledevto 3 года назад
@@SaltCityEuros I see some of the threaded rod protruding from the backside. I would see if you could attach a nut on the backside, then weld the nut and broken bolt so you could pull it out from the backside.
@SaltCityEuros
@SaltCityEuros 3 года назад
Good idea, I will need to try that in the future. First I need to learn to weld
@mobiledevto
@mobiledevto 3 года назад
@@SaltCityEuros if you have a friend with a mig welder.
@TheCabillaud94
@TheCabillaud94 3 года назад
Great video as usual! You need to fix your rusty jacking point tho, jack point collapse is NOT funny
@SaltCityEuros
@SaltCityEuros 3 года назад
I have some welding ahead of me that’s for sure
@ottson
@ottson 3 года назад
Why no centre caps man?
@SaltCityEuros
@SaltCityEuros 3 года назад
I don’t like the look of the wheels with them, they are kinda cheesy looking. But then again, I guess it doesn’t look super sleek without them either.... dilemma 🤔
@ottson
@ottson 3 года назад
@@SaltCityEuros How about blacking them out then putting them back on?
@lucasrittinge30
@lucasrittinge30 3 года назад
Ich musste auf die 4 Schrauben nochmal Schrauben aufschweißen, dann gingen sie einfach raus 😉
Далее
E30 Aux Fan Wiring explained...SPAL Fan Install
8:14
Classic Italian Pasta Dog
00:20
Просмотров 2,1 млн
아이스크림으로 진짜 친구 구별하는법
00:17
BMW E30 rear subframe removal in 20 minutes!
19:11
Просмотров 18 тыс.
Easy Rust Repair and Lacquer Peel Fix for Your Car.
16:16
Poly Suspension Bushings - (15 Year Review)
6:23
Просмотров 98 тыс.
The Truth About Poly
13:34
Просмотров 8 тыс.
Installing M3 Subframe Bushings on my E92 335is
14:33
BMW Z3 - DIY subframe bush removal tool
9:21
Просмотров 1,6 тыс.
Classic Italian Pasta Dog
00:20
Просмотров 2,1 млн