BMW X1 E84 hidden service menu

Подписаться 191 тыс.

Просмотров 223 тыс.

50% 1

Hidden menu in BMW X1 E84 for instrument cluster diagnostics and tests. View live data like digital vehicle speed, engine RPMs, engine temperature, test chimes, indicators, gauges and displays and more.
Follow this tutorial to enter test mode in your BMW car.
01.00 - FGSTNR (vehicle identyfication number)
01.01 - K-ZAHL W/T
01.02 - BMWTNR
01.03 - COD DIA (diagnostic codes)
01.04 - KI HSTLDATUM
01.05 - HW AEI (hardware version)
01.06 - SW (software version)
01.07 - KODIERDATEN (coding date)
01.08 - CAN
02.__
02.00 - KI TEST (instrument cluster test)
03.__
03.00 - UNBELEGT (not used)
04.__
04.00 - VERM-MOM (current fuel consuption)
04.01 - VERM-MOM (current fuel consuption)
04.02 - D-VERB1 LIT (data used for calculating average fuel consumption)
04.03 - D-VERB1 WEG (data used for calculating average fuel consumption)
04.04 - D-VERB2 LIT (data used for calculating average fuel consumption)
04.05 - D-VERB2 WEG (data used for calculating average fuel consumption)
05.__
05.00 - RW-VERB (fuel consumpion used to calculating range)
05.01 - RW-MOM (calculated range)
06.__
06.00 - TANK L R S (fuel level readouts from left sensor, right sensor and estimated sum)
06.01 - TANK-ANZ PH
06.02 - TANK-OHM L R (raw data from fuel level sensors)
07.__
07.00 - KTMP-MOM (coolant temperature)
07.01 - ATMP-MOM (ambient air temperature, momentary)
07.02 - ATMP-ADC (ambient air temperature, average)
07.03 - N-MOT-MOM (engine speed)
07.04 - N-VWF-MOM (current start position of tachometer yellow field)
08.__
08.00 - V-EFF (real current speed)
08.01 - V-ANZ (fake current speed to be shown on the speedometer)
08.02 - V-SZ (target speed set by the cruise control)
08.03 - DGESCH1 WEG
08.04 - DGESCH1 ZEIT
08.05 - DGESCH2 WEG
08.06 - DGESCH2 ZEIT
09.__
09.00 - UB (battery voltage)
10.__
10.00 - KM / WOCHE
10.01 - GELB CBS H A
10.02 - SC-STATUS
10.03 - CBS-MODE
10.04 - TAG-ZAEHLER
11.__
11.00 - ZEIT-EINH (12h / 24h clock mode)
11.01 - WEG-EINH (distance and speed units)
11.02 - TEMP-EINH (tempretature units)
11.03 - VERB-EINH (fuel consuption units)
12.__
12.00 - V-ANKUNFT (average speed used for calculating ETA)
12.01 - ANK_ZEIT (ETA)
13.__
13.00 - AUDIO (instrument cluster speaker test)
14.__
14.00 -
14.01 - FSP01
14.02 - FSP02
14.03 - FSP03
14.04 - FSP04
14.05 - FSP05
14.06 - FSP06
14.07 - FSP07
14.08 - FSP08
14.09 - FSP09
14.10 - FSP10
15.__
15.00 - PORT 00h
15.01 - PORT 01h
15.02 - PORT 02h
15.03 - PORT 03h
15.04 - PORT 04h
15.05 - PORT 05h
15.06 - PORT 06h
15.07 - PORT 07h
15.08 - PORT 08h
15.09 - PORT 09h
15.10 - PORT 0Ah
15.11 - PORT 0Bh
16.__
16.00 - DIMMRAD-CAN
16.01 - PHOTO-ADC
16.02 - DIMM-PWM S Z
16.03 - DIMM-PWM D K
17.__
17.00 - DISP-HEIZ
17.01 - NTC1 NTC2
17.02 - KONTR-PWM
18.__
18.00 - CC-TEST? (warning lights test)
19.__
LOCK (hidden menu lock)
20.__
20.00 - KORR-VERBR (fuel consumption correction factor)
20.01 - 1er KORR (add 1 to correction factor)
20.02 - 10er KORR (add 10 to correction factor)
20.03 - 100er KORR (add 100 to correction factor)
21.__
21.00 - RESET? (resets date, time and trip computer memory)
mr-fix.info/
Facebook: / mrfixpl
Instagram: / mrfixpl
Pinterest: / mrfixpl
Instructables: www.instructables.com/member/m...

Авто/Мото

Опубликовано:

25 авг 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@pieka9931 3 года назад

Its called „Fahrgestellnummer“ Great Video!

@johnbaldock6353 4 года назад

Great Vid. Just about to buy one now i know how to check it out!!

@jasweengujral 5 лет назад

thank you so much

@sundayking6870 Год назад

This is exactly what I was looking for. Thank you very much. 👍🏼👍🏼👍🏼👍🏼👍🏼

@mrfixpl Год назад

Happy to help!

@debelistric2106 4 года назад

Thank you, i needed the current consumption i can check its consumption on P without A/C.

@fofdeejay 6 лет назад

Tnx 👍

@janosmarton8680 3 года назад

Hi thanks for the video it helped a lot. I would like to ask for the oil to restart after a change. Meanwhile I found a big thank you.

@ciobanualinvictor 3 года назад

👍 very nice !

@Pdeberar 8 месяцев назад

Thank you! When my car first turns on I get a date and mileage that never counts down. Is that normal?

@bravelamprey9508 Год назад

Hey guys, the coolant temp in my e84 hovers at around 95 to 105 deg celcius. Is it normal?

@PaulSmith-eb2eg 2 года назад

2013 E84. Speedo reads 100km, when actual road speed is 94km. Can this be set to read true? In New Zealand, we prepay a road distance user fee. Every 1000 km purchased only gets me 940km. I would like accuracy, or even a setup to read short, for greater real distance...

@TropicalFuzz 4 года назад

Mine shows Menu 1.3 Cod dia 0009h 08d0h is this normal?

@hamzamo95 6 лет назад

Hi, I wonder if u can help me with this little problem with my interior lights! Ever since I upgraded my light to LED canbus, my map light shuts off by itself within 3 seconds and will not come on again until I stop, turn the car off and start driving again. It is very annoying at night. Thanks!

@mrfixpl 6 лет назад

Well if your LEDs were in face CAN-BUS ready, then the roof module would not detect blown bulb and would not cut the power off from that bulb.

@afnankhanlodhi 3 года назад

Hi there. Thank you for the informative video. I just replaced the instrument cluster on my bmw x1 2012 diesel and the new one shows SOS call system failure error. Can you please help me how I can remove this error and also if i can turn on the auto start stop system of my car through the code? warm regards

@mrfixpl 3 года назад

Hi! Sorry, but I don't have enough experience with BMW to guide you with coding. I believe that you need to check how the instrument cluster coding looks like and change it to match your cars equipment.

@KayimR 5 лет назад

Hi, Great informative video that you. How do you keep function 08.00 - V-EFF (real current speed) to display. I done few time it's not displaying. Thanks in advance.

@mrfixpl 5 лет назад

You can do one of two things: When entering hidden menu, while you press and hold the trip reset button turn on the engine. Once you got the engine working, go to the 08.00 and it should stay on the display. You can also recode your instrument cluster to have the digital speedometer as one of the trip computer options. Here's how it looks: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QXiFEPAzvMI.html

@KayimR 5 лет назад

@@mrfixpl Great I will try tomorrow. Thank you for your quick respond.

@JakeKennes 5 лет назад

Hello, Great video!! Thank you!! It works very well!! I have just replaced the front brake pads on a 2015 BMW E84 X1, It presently says I must do the service in 470km. I tried to reset the front brake pad warning but it does not reset, but stays at 470km. I have first unlocked with the VIN and then gone through the steps holding the button on the left and then using the BC to get "Reset" fron brake pads and hold BC until the little clock shows, but no reset can be done. Must I wait until I have actually reached the full km value (no more km remaining) before the service and then do a reset? Or is there something I do wrong? Thank you, Jake

@mrfixpl 5 лет назад

Please make sure that you replaced pads & sensors. Those are sold separately. If you still have old wear sensor, then you can't reset this service message.

@user-qz6ix7od3b 3 года назад

@@mrfixpl is this right? the car knows if i changed the sensor or not? because the sensor is in perfect condition if you change the break pads in time. if it's true....then interchange the back and front sensors :D should be ok then, no?

@ahmadsilmarillion9984 3 года назад

Can we turn on/off the PDC from the hidden menus...? My x1 E84 doesn't have pdc button and my PDC now stops working, which previously worked.

@chanendlerbong4522 2 года назад

No. There is a sensor issue.

@encapsulatio 4 года назад

It would be wonderful if you could show how one can attempt to repair a trunk lock that does not lock when I press the button on my key for the BMW X1 from 2013.

@mrfixpl 4 года назад

You sure it's not locking? Some cars have intentional delay on the trunk lock, so you can lock your car and still have minute or two to access the trunk with you keys already in your pocket.

@encapsulatio 4 года назад

@@mrfixpl no it's not locking from the remote,no matter how much i wait.I can only close it manually but not lock it with the remote.

@JukkaMarin 5 лет назад

How to calibrate the avg consumption display? Mine is showing 0.6 liters less than the real consumption is. (Better yet, how to change the real consumption to match the display? ;-)

@mrfixpl 5 лет назад

There's a way with hidden menu to do that. I will make a video about that soon.

@mattharrison9550 Год назад

Just curious here, can you check the transmission fluid temperature when replacing with new?

@mrfixpl Год назад

I don't think instrument cluster shows this data. You would need diagnostic tool for that. Check my review of CGSulit that I posted couple days ago.

@pitrrss 2 года назад

Thank you BMW X1 2009? PLEASE

@Kinimatikos 4 года назад

Is there a way to check the real klms of the car through hidden menu?

@mrfixpl 4 года назад

Unfortunately no. There are some ways of checking it with diagnostic interface but even those methods are not 100% sure.

@heitor9772 6 лет назад

Hi. Very helpful video. Is it possible to reset the battery trough this hidden menu? Tks

@mrfixpl 6 лет назад

Hi, what do you mean by "reset the battery"?

@heitor9772 6 лет назад

I read that when you replace the battery you should proceed the battery reset... something like to inform the car that the battery is new...

@mrfixpl 6 лет назад

oh, OK. You need diagnostic tool for that. Instrument cluster diagnostic menu only shows data related to the cluster itself. There's not much that you can change with it. And battery information is stored in CAS module.

@nickkotsify 5 лет назад

the carly app with and obd can do what your asking

@jon.e19 Год назад

I can get speed reading in 08.01 but it’s in KM not MpH

@milos44ss Год назад

i bought a car (X1) from the Switzerland and have just 3 languages (DE, IT, FR) but not Eng. is there any option to add it by myself or i have to go to the service?

@mrfixpl Год назад

You need BMW-specific service tools to upgrade the firmware and add option code.

@slavcokocoski3520 3 года назад

Hi it is possible to add more things like options on BC button ( like coolant temp, engine speed ambient air temp, and exct.) If its possible can you tell me how to do that in the hidden menu to add these futures. Thank you at all.

@mrfixpl 3 года назад

I believe that you can add vehicle speed to the BC menu, xenon/DRL switching sensitivity to settings and that's about it.

@slavcokocoski3520 3 года назад

@@mrfixpl thank you

@Boehme417 2 года назад

@@mrfixpl How do you add the digital speed? My old MINI had that, and I loved it - especially since the steering wheel in my X1 blocks most of my speedometer from view.

@kaisirkhan5101 10 месяцев назад

If the warning was resent will this test still show if something is wrong with the car?

@mrfixpl 10 месяцев назад

This hidden menu is related only to the instrument cluster, not any other module in the car.

@judymarlin6914 Год назад

Why am I not seeing the video???

@user-qz6ix7od3b 3 года назад

should this apply to f25 ?

@mrfixpl 3 года назад

It will work in most BMW cars. There are some differences, so please check on of my tutorials that I made in in Fxx car: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MCWlM-T72fc.html

@user-qz6ix7od3b 3 года назад

@@mrfixpl thanks! appreciate it!