Тёмный

BMW Z3 Z3M Seat Rail Track Runner Sub Frame Mechanism Bushes Bushings Rocking Repair Kit 

X8R Ltd
Подписаться 13 тыс.
Просмотров 77 тыс.
50% 1

Link to purchase product: x8r.co.uk/bmw-z3-z3m-seat-rai...
Symptoms of fault
Seats rocking or sliding forwards and back as you accelerate and brake. Wobbling or excessive movement. This is a very common fault with all Z3 models.
The problem
The seat rail bushings wear; causing excessive seat movement.
The poor quality rubber bushes within the seats sub frame tracks wear, perish or completely disintegrate and ultimately fail causing excess movement in the rails. This causes the symptoms noted above. This is a very common fault with all Z3 models. OEM replacement bushes if fitted would just fail again as these are also made from a poor quality rubber not suited to the application.
Vehicles affected
All Z3 models
Z3 E36 E37 E38 1994-2002 Roadster and Coupe.
Z3M M Roadster M Coupe
Associated part numbers
52108401291, 52108401292, 52108399593, 52108398812, 52107137499.
The solution
Fit our upgrade seat runner bushes and stop the excess movement in your seats.
Our repair bushes are easy to fit and will cure these faults permanently. Constructed from the proven material Delrin; our part will not deteriorate like the OEM bushes and are designed to last the lifetime of the vehicle. Our kit includes 8x bushes to repair both passenger and drivers seats. An extremely common fault fixed with our repair kit.
What you’ll receive:
8 bushes to repair 2x seats; drivers and passengers.
Available exclusively from X8R Ltd
www.x8r.co.uk

Авто/Мото

Опубликовано:

 

6 янв 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@rogerhill3984
@rogerhill3984 3 года назад
Great instruction with a ladies voice which is clear and concise and easy to listen to. Wonderful, no background music that obliterates the instructional words on other sites.
@X8RLtdUK
@X8RLtdUK 2 года назад
Hi there, that's for the great feedback! - Georgina, X8R Ltd
@raymondjplante
@raymondjplante 4 года назад
Thanks for the video. Had this issue with my '99 M Roadster, no more! One thing to emphasize, make sure you keep the rails exactly as they are on each seat. I mistakenly put the left rail on the right track and vice versa on my driver seat and it caused the seat to move the opposite direction of the switch!
@ramazkutateladze538
@ramazkutateladze538 8 лет назад
May the UK be blessed forevermore for having such shrewd people
@pinkeye00
@pinkeye00 7 лет назад
4hrs of work, $12 of parts and you are done. BMW -> $900 USD just to do this. "skilled" technicians
@DaytonCarCare
@DaytonCarCare 5 лет назад
@@pinkeye00 4 hrs? Took me 30 minutes per seat
@anotherJpen
@anotherJpen 2 года назад
Just did these on a 1999 Z3 2.8, perfect instructions, parts were exact, and no more wiggle!
@X8RLtdUK
@X8RLtdUK 2 года назад
Great work!
@iceglaser
@iceglaser 7 лет назад
Helpful video. Using your bushings I was able to fix the driver seat shimmy in about 30 minutes.
@joroboyvn
@joroboyvn 4 года назад
Thanks for the instructions. Did not used a vice, hammered them down, once sanded to fit.
@cora0928
@cora0928 4 года назад
Thank You for the video. My brother and I repaired my seats. You made it easier.
@rickymann66
@rickymann66 5 лет назад
Thanks for the video and the bushings. Drivers seat is completed.
@MalcolmTroon
@MalcolmTroon 3 года назад
Good video. Thanks! Because the original bushings were completely dissolved to goo, the unthreading count was 2 turns less than the re-threading turn count. With the seat in the full rearward position during removal, both carriers were 7 turns to remove, but 9 turns to reinstall. Also, the receiver "key" at the tip of the assembly that sleeves with the drive rod is square and it is helpful to pre-align the threaded rod to match the drive rod orientation.
@thulsa5218
@thulsa5218 4 года назад
Best video on here showing this procedure!
@kaasimmir8971
@kaasimmir8971 8 лет назад
thank you for this video. I shall be trying this tomorrow
@faridzabihi9481
@faridzabihi9481 5 лет назад
Thank you soooo very much. Great video and super helpful.
@dannyphillips995
@dannyphillips995 4 года назад
Superb video in every way
@roberthelman5096
@roberthelman5096 2 года назад
Brilliant Video!!!!
@panchovenegas4401
@panchovenegas4401 8 лет назад
thanks for the video
@thedream7504
@thedream7504 4 года назад
Thank you so much
@grisardphilippe5846
@grisardphilippe5846 5 лет назад
Great video thank's, Just one of the sliders has an L on it should go on the left side of the seat otherwise the electrical command will be inverted and as stated below do not screw tight the 2 x T25 Torx screws on the sliders, to much friction will block the rail track.
@DaytonCarCare
@DaytonCarCare 5 лет назад
Why not wrap a piece of tape or a dab of paint on thread area as a marker instead of counting turns? Though I find it odd that you're paying around $20 for a set of plastic washers that you still have to sand down to fit properly. They should be the proper thickness in the first place.
@flortessi
@flortessi 8 лет назад
Good vid
@bartoszkom7679
@bartoszkom7679 3 года назад
Better than counting turns is to measure the length from one end to place where goes bushings.
@roblesser6469
@roblesser6469 8 лет назад
Do you have a DYI video on how to replace complete right side seat belt for 1998 BMW Z3?
@twoscoops5197
@twoscoops5197 4 года назад
4:58 :eyes: Thanks for video!
@michaelnader4682
@michaelnader4682 Год назад
I am having trouble with the inside rear bolt. I don't have enough room to apply the pressure I need to unbolt it.
@hadikailani7196
@hadikailani7196 4 года назад
are there kits for sale to replace the mechanism itself?
@zitual
@zitual 4 года назад
I have a problem, I must have been wrong to count the number of turns, so now I try to place the seat but it is displaced from the chassis bolts. How can i fix this?
@Stevebailey1954
@Stevebailey1954 7 лет назад
how to replace 1999 BMW roadster Genuine Antenna Seal Grommet
@ryn004c
@ryn004c 6 лет назад
Hi X8R, I've bought your bushings and followed the video instructions, but I have an issue when it comes tightening the 2 x T25 Torx screws on the sliders. When I tighten them they power seat motor goes under a lot of stress, however when they are loose or not on at all the motor works fine. The new bushings have been aligned correctly, and just comes to question is this why the original part is rubber to compensate for the "wiggle" in the tracks? Any feedback is appreciated so I can have it secured in my car.
@DaytonCarCare
@DaytonCarCare 5 лет назад
Might have the thread count wrong vs the other rail and it's binding. I find it better to measure with a tape or ruler before disassembly instead of counting threads
@DIM0S_
@DIM0S_ 3 года назад
Hi man Your comment about tighten the 2 x T25 torx screws help me to find and solve the issue about the stress that I have in seats motor. I find that I had pushed a lot deeper than the ideal this metal thing with the bushes inside. And the hole was not exactly in the center. That causes this problem and in my opinion is dangerous to burn the motor. If anyone wants to test the seat rail movement before place it in the car can do this by connecting a 12V battery directly to the motor's plug. And for removing to the other side just change the polarity in battery
@DCS6000
@DCS6000 4 года назад
Hi, does anyone have a tip where to buy the Reparation Kit? I love dearly my Z3 1999, but it dumped the annual check today.
@rogerhill3984
@rogerhill3984 3 года назад
eBay X8R advertise there. Under£15 for 8.
@eylemkutlu8714
@eylemkutlu8714 8 месяцев назад
2000 model z3 sağ arka taşıyıcı kırıldı Türkiye de bulamadım hangi model z3 e uyumlu bir bildiğiniz var mı
@X8RLtdUK
@X8RLtdUK 8 месяцев назад
Merhaba, koltuk tamir seti arıyorsanız burada bulabilirsiniz: x8r.co.uk/bmw-z3-z3m-seat-rail-track-runner-subframe-mechanism-replacement-bush-repair.html
@pinkeye00
@pinkeye00 7 лет назад
or just use a rubber mallet and tap the bushing in place .. :)
@Britswhiphun
@Britswhiphun 7 лет назад
where do you get the bushes from?
@X8RLtdUK
@X8RLtdUK 7 лет назад
x8r.co.uk/bmw-z3-z3m-seat-rail-track-runner-subframe-mechanism-replacement-bush-repair
@walterjijon9813
@walterjijon9813 7 лет назад
where do you get the bushings kit
@X8RLtdUK
@X8RLtdUK 7 лет назад
www.x8r.co.uk
@berkeleydojah
@berkeleydojah 10 месяцев назад
does this apply to e39 5 series seats as well??
@X8RLtdUK
@X8RLtdUK 10 месяцев назад
We have not tried it on that vehicle therefore cannot confirm if it fits. - Georgina, X8R Ltd
@josebellodi9250
@josebellodi9250 7 лет назад
I have a BMW Z3 with the same probem. One more question: Is there some special procedures to disconect and reconect the electrical plugs? Thanks a lot for the video!
@DaytonCarCare
@DaytonCarCare 5 лет назад
nothing special just push down on plastic locking pieces on plug before pulling
@pinkeye00
@pinkeye00 7 лет назад
mmmm thread lock ... blue thread lock
Далее
How To Replace the Worn Seat Bushings- BMW Z3
9:13
Просмотров 12 тыс.
БАССЕЙНЫ ПО ЦВЕТАМ ЧЕЛЛЕНДЖ !
38:20
Most Common Seat Repair Auto Upholstery
22:21
Просмотров 1,8 млн
BMW Z3 Sitze wackeln - so habe ich das repariert
21:26
Not A Z3 - Meet The BMW M Roadster
10:15
Просмотров 46 тыс.
Finally replacing the HORRIBLE BMW Z3 subwoofer!
10:37
BMW Z3 Buying Guide - Cheap RWD Sports Car Investment!
14:24
How to Fix BMW Z3 Rocking Sliding Seat Full Guide
8:17
BMW Z3 - Seat Rail Bushing Replacement Video
8:04
Просмотров 10 тыс.