BMW Z4 convertible top does not work!

Подписаться 2,7 тыс.

Просмотров 60 тыс.

50% 1

✅BMW z4 convertible top does not work✅
Hey guys, in this video I demonstrated HOW TO REPLACE convertible top hydraulic pump motor on 2004 BMW Z4! Make sure that you use quality parts and tools!!!!
!convertible top hydraulic pump motor!
☝ amzn.to/3aVprv8
I hope this video will save you some money !
✌ Thanks for watching!
✌ Thanks for watching!
♦ Things used in this video:🎬
1. Logic ☝
2. Camera: amzn.to/2w1BBUU
3. Camera Microphone: amzn.to/2Ut7tLG
4. Portable Recorder: amzn.to/3dGMg8g
5. Camera Tripod: amzn.to/2Urgch4
5. My computer for editing / uploading: amzn.to/3dDQGga
✅Subscribe and hit the notification bell! ✅
/ @firstautomotivechanne...
⚠ Disclaimer⚠
FANCY MECHANIC is not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not FANCY MECHANIC!
🔥This video made for entertainment purposes!🔥
#BMW #z4#convertible#top

Авто/Мото

Опубликовано:

30 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@craiggalvin829 3 года назад

Really helpful, honest and humble! I really like that you don't edit out how you learn along the way, it makes it really good to see that so gives me the confidence to give it a go too. Thanks so much.

@landontesar3070 3 года назад

Thanks for the video and showing the attempt to rebuild the motor.

@Williamgenet Год назад

Way to go! Verry helpful! clear and simple!

@juanpablo-vn1xo 3 года назад

awesome!...makes it look far easier than i thought it would be....thanks!

@marcr5586 3 года назад

This was so helpful my friend, you saved me thousands. I was able to pull motor out, that was sitting in greasy water. I sprayed it WD 40, cleaned it with fine brush, and dried it with my leaf blower. CAN'T BELIEVE IT, works faster, and better then ever..thanks so much 👍

@tim-hill 3 года назад

So you simply cleaned the original motor? You did not buy the replacement?

@tim-hill 3 года назад

@Greg Modde I actually tried this and it worked. :)

@firstautomotivechannel6677 3 года назад

Glad it helped

@Mscoffeegrind 9 месяцев назад

I was wondering if drying it was an option. Is it still working?

@Mscoffeegrind 9 месяцев назад

I was wondering if drying it was an option. Is it still working?@@tim-hill

@verminswillpig 3 года назад

thanks mate .legend

@antonitorres5934 3 года назад

Great video. Everyone says take off top. You showed the the right way. Thank you again. Tony T from NC

@firstautomotivechannel6677 3 года назад

Glad it was helpful!

@user-fw2qq1hi1m 3 месяца назад

You the man big bro

@sleepinggianthasrisen9651 4 года назад

Hey guy, thank you very much for this how to video on replacing the convertible top motor. Life saver info and big cost saver too. Thank you friend.

@firstautomotivechannel6677 4 года назад

Glad it helped

@kirwangoode2889 Год назад

Nice work is my next mission thanks for the helpful tips

@michan7312 3 года назад

Maty I uk 🇬🇧they love for that job what you dan bless 🙌

@carlluscombe4011 Год назад

Brilliant video/info, thanks for taking time to make this much appreciated from here in the UK, i got same problem with my roof but now you have given me confidence to give the repair a go myself.

@Mscoffeegrind 9 месяцев назад

Did you try it? if so, was it difficult and where did you get your part. The link he provided seems to be no longer available. Mine makes the sound that it is going back but doesnt. I think mine has gotten soaked with water.

@thebabyblue61 3 года назад

Perfect. Job well done

@firstautomotivechannel6677 3 года назад

Thank you very much!

@AnnukkaASMR 4 года назад

Just yesterday took the whole roof off a second time. Good tip if the third time comes up. Thank you. 👍🏼

@firstautomotivechannel6677 3 года назад

Glad it helped!

@kab2a 3 года назад

Great job on both the fix and video, you da man

@firstautomotivechannel6677 3 года назад

Thanks 👍

@orionthr123 2 года назад

I’ve finally relocated my motor to the trunk on left side behind taillight, I bought two 3 foot Hydraulic cables and all four lines fit perfect, I added wire to 12 volt line. Tucked it all upwards. However, I was able to take the Top off in 10min after doing that 7 times.

@grzesiek89231 3 года назад

Thanks buddy

@firstautomotivechannel6677 3 года назад

Happy to help

@jamesheo1754 3 года назад

Thanks

@firstautomotivechannel6677 3 года назад

Welcome

@alwayssold 2 года назад

were did you relocated?

@dorianrees 3 года назад

I think it would be harder to get a pump out like this which has never been disturbed - it’s also awkward doing it in the boot (trunk) like this. It’s a longer but easier (for pump handling purposes) and cleaner job taking the roof off. This is a great time-saving tip if the motor has been out before though. Anyway, I have an issue where my roof goes up and down when it’s out of the car but not when it’s fully fitted. The motor is the right way up, the sensor at the back is fine, the manual release lever is fine and the hydraulic lines are not obviously pinching. I’m at a total loss! If anybody has any other ideas, these would be much appreciated! Somebody has suggested that some of the electric wires might have snapped within the loom...

@rafaelprdm4 3 года назад

Hey just dump like that I'll over the oily trunk ,them off ?? Top of new motor. Nice job do you have a bench ,

@69elchupacabra69 3 года назад

Are you the author of that guide in the forums? Regardless, this is helpful

@Devil_Dog_Ultra 3 года назад

so i did all that and my top has a hard time coming up i have to assist it any thhoughts

@davideesposito3253 2 года назад

I need thus done on my z4 where are you located

@vicm4174 2 года назад

Having a problem with same car but motors work top just doesn’t go up or down

@Whatsfocus Год назад

How do you seperate that part from the motor? Mine is stuck

@jeffk9658 3 года назад

How did you relocate the motor inside the trunk? The last shot of the motor it was just hanging over the shelf bracket by the hydraulic lines. Did you put it back in the housing and mount it in the trunk somehow?

@firstautomotivechannel6677 3 года назад

Mount it in the trunk!!!

@831sholo 3 года назад

I need help! So I changed the motor but its not the motor what are the chanses is the converible folding top control unit? And also how much hydraulic oil should I put... Half ways the little container?

@tim-hill 3 года назад

I was told the hydraulic fluid should be 3/4 full. Did you have to get the air out of your hydraulic lines? Mine is not working either and I'm curious.

@vegale1 3 года назад

Hi excellent video just a question its only one motor to change ?

@firstautomotivechannel6677 3 года назад

Yes, correct

@NeroAngelo27 3 года назад

Did you put the Pump back to the same spot you pulled it put from or in a different location?

@firstautomotivechannel6677 3 года назад

Yes, will be better to relocate the pump !!!

@jayjaycp5454 3 года назад

@@firstautomotivechannel6677 can we order full parts or have to order just motor

@modafactory7577 3 года назад

When you connect the motor how you know which is the positive and negative ??

@slavaukraine5117 2 года назад

Red wire is positive black wire is negative

@christianatayi4856 3 года назад

I did everything the right way but I’m not getting any power at all from the front motor to open the top

@dorianrees 3 года назад

I had that and the sensor at the back of the boot wasn’t engaged properly, so I just bunged it up with paper and that then worked?

@AllDogsGo2Heaven 3 года назад

Can you fix mine as well please? 😏

@martymacfly4002 3 года назад

super toute l'huile hydraulique sur la moquette.....et sur l'axe qui est parti il y a un ressort!!

@mr.crankdat9878 3 года назад

I am haveing alot of trouble getting the cap off! I took the tape off but it seems like stuck or something. Any thoughts on why this is

@Explocify 3 года назад

Id try to fit a phone with camera to try and get a better look

@paulsmith3500 2 года назад

Just did mine today struggled for about 2 hours used a small pri bar and eventually got the plastic top off with great deal of difficulty . Although after that motor was easy to pull out , cleaned it up dried it topped up fluid and left it hanging in boot works again 😃!!!! I'm not putting it back in it original place just need to fix it so it's not hanging on pipes and thrashing about

@HEX_n_candy 11 месяцев назад

Lots of tape.....I used something to pry it up while I removed the tape....took a few minutes longer than I would have liked but with it being held up I was able to get the tape off and then the cap