Boat Building, Installing the Fore & Aft Decks, S2-E41

Подписаться 74 тыс.

Просмотров 51 тыс.

50% 1

In this episode of the Art of Boat Building (S2-E41) we see Bob installing the Fore & Aft Decks. In addition the aft bulkhead is installed and the tiller hole is cut into the transom. The Haven 12 1/2 boat plans are referred to and read for information on how to build the bulkhead and deck.
“If you’re going to make it, make it beautiful.”
Bob Emser
Schedule a Call:
calendly.com/artofboatbuildin...
Chapters:
0:00 Introduction
2:07 Building the Aft Bulkhead
10:26 Cutting the Tiller Hole
11:51 Installing the Aft Deck
14:45 Installing the Fore Deck
Subscribe for more Boat Building from The Art of Boat Building:
ru-vid.com...
Share this video with a friend:
• Boat Building, Install...
How to support The Art of Boat Building.
Purchase Official Merchandise here:
www.bonfire.com/store/the-art...
Become a Patron:
/ theartofboatbuilding
Watch next
Recommended Playlists
Carvel Planking Playlist:
• Carvel Planking
Haven 12 1/2 Playlist:
• Season 2 - Haven 12 1/2
Tool Making:
• Tool Making
Let’s connect:
Facebook:
/ bobemseramericansculptor
Instagram:
/ artofboatbuilding
Twitter:
/ bobemser
Linkedin:
/ bobemser
Bob Emser American Sculptor:
www.bobemser.com
Video equipment used:
CanonM50: amzn.to/2TVob5l
Takstar SGC-598 (shotgun mic): amzn.to/2ZSVmup
Saramonic Lavalier Mic amzn.to/3drnZCK
Music:
"Airport Lounge" - Disco Ultralounge by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
"Jazz Mango" by Joey Pecoraro
"Playdate" by The Great north Sound Society
"Billy Goat Stomp" by Joel Cummins
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I’d earn a small commission if you make a purchase at no additional cost to you.
#theartofboatbuilding #artofboatbuilding #makeitbeautiful#woodenboatbuilding #buildingasmallboat #buildingasailboat #shipwright #toolbuilding #Haven12 #herreshoff #shipwright

Хобби

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 146

@ariesdane5876 3 года назад

I just binged watched 4 hours worth of your episodes. You're production quality of these videos is incredible, and they're just right balance of showing your work vs talking about it. Thank you for the hard working in putting these videos out - and let's hope you're efforts are rewarded with 10x the views / subscribers by the end of the year.

@TheArtofBoatBuilding 3 года назад

Wow, thanks! I'm glad you've enjoyed them. Thanks for watching and your kind comment!

@douglasmoffat6560 Год назад

Not sure why I chose this episode to make this comment but it is incredibly satisfying watching your boat coming together! I am late to your videos; I learned of you from Acorn to Arabella. Since I am watching your videos in order I haven’t seen whether you paint the underside of the bow deck and bed it since it’s supposed to be watertight. I have a couple of 95-year old wood-canvas canoes that I’ve recanvased so I at least have some knowledge of how to stretch canvas!

@mattevans-koch9353 3 года назад

Every time I watch your videos I seem to find some little trick or idea that I had never considered but is just genius. The toilet bowl ring for waxing screws is one I can put to use immediately. Thank you Bob for all that you share.

@TheArtofBoatBuilding 3 года назад

Glad you liked it! Thanks for watching!

@Edivision 3 года назад

Magnificent craftsmanship. I love watching you work. Thank you Bob.

@TheArtofBoatBuilding 3 года назад

Thank you very much!

@TrapShooter68 3 года назад

Love your work. This is what PBS was meant to be. Just a person in a shed with their tools.

@TheClBlues 3 года назад

Fine work, fine tools and fine tricks to achieve this beauty ! Your videos are a real pleasure to follow, even the music is not necessary compared to your explanations and the cool noise of tools ! I can't wait to see the next one, but don't hurry Bob, keep this so enjoyable calm rythm.

@_blento_2637 3 года назад

Absolutely love your videos. What I find amazing 😂 is that your workshop is as clean as pharmacy 😂. @ 7:30 there is some dust from boring and on 7:39 all cleansed. When u get done with this project please come to Atlanta. I need some help at house cleaning 😂😂😂

@jaysonlima9271 3 года назад

I can assure you my shop looks absolutely nothing like his lol there's probably a solid ¾" of sawdust on the floor, but it makes cleaning any spilt paint very easy, just let it dry and lift it off. Not saying I'm a slob mind you, my tools are always stowed, neat and clean. But the floor eh not so much lol

@fonhollohan2908 3 года назад

Looks great Bob, as usual your camera work is superb.

@TheArtofBoatBuilding 3 года назад

Many thanks!

@bulentkamali 3 года назад

Kind regards from Izmir, Turkey sir. I have learned a lot from you. What you're doing is precious for guys like me who wants to build his own sail boat.

@dalegaren3515 3 года назад

I enjoy watching build your boat. I’m surprised you didn’t paint the underside of the decks.

@TheArtofBoatBuilding 3 года назад

Hi Dale, It's really an unnecessary step. It would be like painting the underside of a house roof. The canvas covering will act like shingles on a house. These are areas that are not in direct contact with water. Thanks for your question and watching. Cheers, Bob

@dalegaren3515 3 года назад

I know all that but as meticulous as you are I thought you would paint them.

@garryjackson3941 3 года назад

art of boat building...i tend to disagree where the higher moisture content off lake or sea air will be traped an allowed to soak into the bare timber ply

@DFMurray 3 года назад

Gonna go grab my coffee real quick then watch this. Going to be a gooood morning!

@mkbman45 3 года назад

PBS needs to give you a show!

@MCsCreations 3 года назад

Amazing work, Bob! It's getting even more beautiful! 😃 Nicely done! Stay safe there with your family! 🖖😊

@tedlinzy5865 3 года назад

Wow! Great way to start a frosty Saturday. Thanks!

@thomasarussellsr 3 года назад

I am surprised you didn't paint the deck panels, undersides and edge, before screwing them down. It is your boat, and the plans call for a canvas covering, but I would have loved to see bright worked wood striped decks. Of course, those might still be going on top of the canvas. (I hope). Great trim work, lining out the cuts to fit perfectly. I love watching you work. Your meticulously accurate work, that anyone can follow, is a joy to watch. You are a great craftsman and teacher. See you on the next edition/video.

@joematthews 3 года назад

So satisfying to see the small aft deck edge pieces fit in

@Mr16251 3 года назад

Calm and methodical as always. I love watching your work.

@TheArtofBoatBuilding 3 года назад

Thank you very much!

@pnchad 2 года назад

Mad skills. Bravo

@thomasvelure6237 3 года назад

As always,vey fun and informative. Thanks Bob

@garyfroeschner2523 3 года назад

Great work.

@surprising321 3 года назад

Thank you Bob, love to watch you and your craftsmanship.

@SH-fi8sn 3 года назад

I'm really enjoying your project/videos. Such a beautiful boat! It's a joy to watch it come together

@TheArtofBoatBuilding 3 года назад

Thank you very much!

@Rsama60 3 года назад

This will be a nice boat. I am always on the lookout for a new eppisode.

@SpecimenSpiff 3 года назад

This project is moving right along. Going to be in the water soon!

@hawazz1 3 года назад

Thank you, Bob! Great as always!!

@TheArtofBoatBuilding 3 года назад

My pleasure!

@rick91443 3 года назад

Always enjoy watching(as I always say, and quite often.) cheers...rr Normandy, France

@richardbohlingsr3490 3 года назад

Very nice craftmanship and attention to detail.

@marekkaletka6746 3 года назад

It has to be one of the cleaniest boat build u've seen, and great camera work as well. Thanks for sharing.

@hrmacdonald4471 3 года назад

First time watcher of your videos. I'm not a boat builder, but I love boats. I really enjoyed this video and will watch more of them...thank you for sharing!

@TheArtofBoatBuilding 3 года назад

Thanks for watching!

@richardsiddon610 3 года назад

Cheers Bob. Have a good weekend.

@TheArtofBoatBuilding 3 года назад

You Too!

@johncollins5021 3 года назад

You make complicated boat building simple. Nice work.

@TheArtofBoatBuilding 3 года назад

Thanks John!

@danielguilbeau5403 3 года назад

Excellent travail

@michenji 3 года назад

Thanks immensely

@glassgoat9601 3 года назад

Looking good!

@keithbrowning3899 3 года назад

Such a relaxing 25 minutes for a Sunday morning. Some of the other boat building videos I follow are more Indiana Jones - seat of the pants experiences. Both have their place. Look forward to when your beautiful boat finally hits the water.

@brettjohnsey6517 3 года назад

Sunday ? Its Saturday lol

@keithbrowning3899 3 года назад

@@brettjohnsey6517 We are all in lockdown and have been for weeks. I have no idea what month it is let alone what day....thanks for the heads up.

@thomasarussellsr 3 года назад

Heck, I thought it was Sunday too. Thanks for the correction.

@davidc6510 Год назад

Lot's of fine progress Bob. I was curious as to why you did not add butt blocks under the deck seam for added strength. Great videography in your videos. Thanks for sharing!

@aluminium83510 3 года назад

Great job super, from France

@TheArtofBoatBuilding 3 года назад

Thank you very much!

@tomtruesdale6901 3 года назад

She is coming right along Bob, you are doing some very fine work there. I am surprised you did not use and sort of bedding compound on the deck beams or is that something that might happen later? Looking forward to the next video

@ricklapp83 3 года назад

The music is soporific Bob.

@rainbowchild63 3 года назад

Hello,Bob!Great job as always!Not job but the art!

@TheArtofBoatBuilding 3 года назад

Thanks 👍

@adamchambers5599 3 года назад

After years of balsa bashing, Im starting to feel the urge for a boat. I only live 2 miles from the sea near Southampton, so I really should get building.

@pedroaffonsorosar1315 3 года назад

Parabéns. Muito bom trabalho

@TheArtofBoatBuilding 3 года назад

obrigado por assistir

@anibalachondo876 3 года назад

cuanto que se aprende con tus videos, saludos desde argentina

@TheArtofBoatBuilding 3 года назад

Muchísimas gracias

@ibrahimarslan2484 3 года назад

Eline sağlık. Tebrikler. Yakışıklı abim.

@TheArtofBoatBuilding 3 года назад

teşekkür ederim

@pjcd7016 3 года назад

Very nice, but why not paint the boards before assembly?

@michaelwilkinson2928 3 года назад

Beautiful craftsmanship. Surely in any wooden boat you should varnish if at all possible to show off the beauty of the build material, especially for the decks?

@porkchop955 3 года назад

The two people who gave a thumbs down have never smelled freshly milled cedar!

@joaodarocha 3 года назад

Why didn't you seal the ends of those boards?

@SkylersRants 3 года назад

I have my yankee screwdriver like that from my dad and I love it. However, I find that if I get too exuberant in using it, then it tends to hop up off the screw and then wehn I push down again it digs a nice cross shape in the wood. I try to only use it on pieces that aren't cosmetically critical. You have better self control than I do!

@SkylersRants 3 года назад

@@boooshes Perhaps you're right, I will be sure to check the fit closer next time. I think I just lift it out out of excessive movement, but I'll try your suggestion.

@VAdu56 3 года назад

I admire your work and the thoroughness you exert to build this boat ... Super Bravo! I am nonetheless surprised that everything is screwed on, and that the wood slices are not coated with paint or varnish before mounting them, because more trad, the humidity will start to come in pae there ... what do you think? well done again for your videos and your work! Vincent from France

@tedkeenan6803 3 года назад

I was working as a boat builder in the late 80's and can confirm that mahogany plywood was readily available and used interchangeably with other forms of marine plywood. Unfortunately no one was concerned with if it was being sustainably sourced, which has lead to the current restrictions.

@JenkinsBoatWorks 3 года назад

Love your attention to detail Bob, not only with the carpentry but some of your camera angles and work are fantastic. I do have a question about your stern knee. Did you cut off slightly the top to fit under the deck? Mine was long and I actually left it and it is visible above my deck. Just curious. I went back and forth on this for weeks.

@TheArtofBoatBuilding 3 года назад

Hi Chuck, No I did not have to cut it. When I had the aft deck beams in and laid a straight edge on them it came out right above the stern knee just slightly touching it. It's your boat really doesn't matter. Looking forward to the water as I'm sure you are as well. Cheers, Bob

@billywhizz6483 3 года назад

Great progress again! I understand why it's painted but it always seems a shame to cover up that beautiful woodwork.

@TheArtofBoatBuilding 3 года назад

I get that. There will be plenty of bright work in the cockpit. By painting the cedar the walnut will have a chance to really shine. Thanks for watching!

@davidhealy7687 3 года назад

Really enjoying this series. As an accomplished woodworker I still an constantly learning more. Could you send me the plans for your ceterboard and box?

@TheArtofBoatBuilding 3 года назад

Hi David, So glad you're enjoying the Haven build. The plans are copyrighted by Joel White and the Wooden Boat Store. So I can't share that part with you. However, you can purchase study plans that I believe will give you the information you're looking for. www.woodenboatstore.com/products/haven-12-1-2-study-plan-digital?variant=17247473303642 Cheers, Bob

@gordonclark7632 3 года назад

By the time your next instalment comes around, I am well and truly ready and waiting for it. I was wondering what you use on the screws. Is it grease or some special wax substance to help with the insertion of the screw?

@TheArtofBoatBuilding 3 года назад

Hi Gordon, It's a toilet ring seal. Bee's wax! Cheers,

@psblad2667 3 года назад

Re the aft bulkhead; the lower end of the planks (against the hull). Wouldn´t it be practical to have a small gap between the end grain and the hull plank to prevent rot in that area?

@TheArtofBoatBuilding 3 года назад

Cedar is a naturally rot resistant wood. Being painted on both sides and the cedars natural abilities I don't have any concerns about rot. Thanks for watching! Cheers,

@liotellan9935 3 года назад

Did you seal the end grain of the decking boards?

@gliderguld 3 года назад

Hi. Allways a pleasure to see your top craftmanship. Just wondering, why you didn't paint the underside of the deck before monuting it. BR /Poul

@TheArtofBoatBuilding 3 года назад

Hi Paul, It's really an unnecessary step. It would be like painting the underside of a house roof. The canvas covering will act like shingles on a house. These are areas that are not in direct contact with water. Cheers, Bob

@gliderguld 3 года назад

@@TheArtofBoatBuilding Thx - just thought theese enclosed areas might limit ventilation and hence stay damp for some time after sailing.

@robertbamford8266 3 года назад

Thanks for the video. Scribing is always interesting. I don’t build boats, but I wondered about backpriming the decking and all the various supporting pieces. Unnecessary? Also, you are using slotted screws. Is there a reason beyond authenticity and availability?

@TheArtofBoatBuilding 3 года назад

I'll talk about slotted screws in the next video. Thanks for watching ! Cheers,

@chetthejet3896 3 года назад

7:20 Bob Did you tell the folks what you use for the beeswax? Bathroom commode seal which is very cheap and easy to find works great..

@TheArtofBoatBuilding 3 года назад

Hi Chet, Yes, in past video. I’m planning on doing a section on screws in the next video. Thanks for the reminder! Cheers, Bob

@simmonscarl1 3 года назад

Hope your tiller has a pretty good bend to it otherwise it is going to stickup pretty high off the deck.

@TheArtofBoatBuilding 3 года назад

Hi Carl, Thanks for your concern. The designer, Joel White, has it covered.

@liotellan9935 3 года назад

You could make the ply wood?

@cc-gu1ff 3 года назад

how do you allow for swelling

@petterandersson7429 3 года назад

I'm looking forward to the mast and spar build. Are they solid or hollow. Round or rectangular? If hollow will you use the "bird mouth" method?

@TheArtofBoatBuilding 3 года назад

Hi Petter, I'm not sure what method yet. It will be round. Which method are you interested in? Cheers, Bob

@petterandersson7429 3 года назад

@@TheArtofBoatBuilding I would really be most interested in a hollow round mast and spar using the Bird Mouth router bit method. There are some videos on "bird mouth" on U tube but I'm sure you could add to the Library a much better and comprehensive video.

@billjohnson8794 3 года назад

Did you have to seal the bottom of the aft bulkhead boards?

@BrunoWiebelt 3 года назад

just wondering why is there no calking seams on the afterdeck. I think to have it waterproof would be good considering rainwater.(sweet water) . Nice build.

@WhatAboutTheBee 3 года назад

Hi Bruno. Pause at 14:43 and note that the deck meets the inside edge of the frames. This leaves a gap the size of the frame thickness! I'm not convinced that caulking the seams between the decking boards is going to substantially change the outcome here! Cheers!

@horatiohornblower868 3 года назад

Both decks will be covered with canvas. No need for caulking here.

@BrunoWiebelt 3 года назад

@@horatiohornblower868 that makes no sens, why not building the afterdeck in plywood too?

@BrunoWiebelt 3 года назад

@@WhatAboutTheBee good point , this part of the build makes no sens for me

@WhatAboutTheBee 3 года назад

@@BrunoWiebelt Think of it this way. Water is going to come into this boat. Unavoidably so. Even if the decks are canvassed, water will come directly into the cockpit. The water will flow into the bilge and then be pumped out. Other than the hull, spending extraordinary effort in making other parts of the boat water tight seems like wasted effort to me. Your mileage may vary. I'm sure Bob has a plan!!

@josephmirabello9207 2 года назад

It’s been a long time, I’m not sure if you’re still looking here. But I have a few questions is there a reason you don’t epoxy the joints? And what’s the reason for the driver instead of a cordless

@CorwynGC 3 года назад

How does the old fashioned method of canvas on wood, work with modern paints? Are you planning on using epoxy paint?

@TheArtofBoatBuilding 3 года назад

I’ve got an modern twist up my sleeve for applying the canvas. All will be revealed in the next episode. Great question! Thanks for watching.

@CorwynGC 3 года назад

@@TheArtofBoatBuilding Looking forward to it.

@dbhyslop 3 года назад

Have you considered wrapping the canvas around the edges instead of adding an edge veneer?

@TheArtofBoatBuilding 3 года назад

Hi Dan, No I haven't. One issue with wrapping it is that it's such a small lip and that it's curved, it would be a challenge to get the canvas to lay properly. The wood trim will be walnut. I think it will give the sheer a nice accent. Thanks for watching! Cheers, Bob

@davidbright7411 3 года назад

Are these your plans and do you have a list of your boat plans

@TheArtofBoatBuilding 3 года назад

Hi David, The Haven 12 1/2 plans are a Joel White design. They can be purchased at the Wooden Boat Store www.woodenboatstore.com/products/16-haven-12-1-2-class?variant=16904448573530

@campbellmj9405 3 года назад

Curious Bob, how much would you estimate adds to your total time by filming the process?

@TheArtofBoatBuilding 3 года назад

Hi Mike, Thanks for your question. Generally, I would say it take twice as long as to do a task. And editing will add another 50%. So 1/3rd of the time is spent actually building. Thanks for watching! Cheers, Bob

@toddhanna1175 3 года назад

@@TheArtofBoatBuilding Wow!! That is a lot of time dedicated to just sharing your art. I wouldn’t have guessed that it would be 2/3rds of your total process. Thank you so much for spending your valuable time with us. Much respect! Cheers from Chattanooga

@mitchd949 3 года назад

At first glance at 7:17 I thought it looked like a toilet wax ring being used to wax your hardware....then I thought, no, couldn't be....

@TheArtofBoatBuilding 3 года назад

Hi Mitch, You saw it right I do use a wax toilet ring to hold the screws. Bonus is that just bit of beeswax stays on the screw to lubricate the ease of the screw going in. Cheers, Bob

@jerryjohns7358 3 года назад

Why not use cedar for fore deck instead of plywood?

@TheArtofBoatBuilding 3 года назад

Hi Jerry, I didn’t see a good reason to deviate from the plans. Thanks for watching! Cheers

@ateliedemaquetes.aereoenav4894 3 года назад

Hi, what is catenaries in the plans of boats?

@TheArtofBoatBuilding 3 года назад

If you start from the bow there is a fairly steep angle, then slowly flatten out until it blends smoothly into the bottom. This curvature in mathematicians call it a catenary. It can be seen when a rope is strung between 2 points, the curve of the sag due to the weight of the rope is a catenary arch.

@ateliedemaquetes.aereoenav4894 3 года назад

Thank You.

@ateliedemaquetes.aereoenav4894 3 года назад

@@TheArtofBoatBuilding can I post your explanation on Facebook?

@TheArtofBoatBuilding 3 года назад

Yes 👍

@georgehenehan123 3 года назад

Painting the bottom and bedding the deck pieces just not necessary or other reason?

@TheArtofBoatBuilding 3 года назад

Correct just not needed. As you know cedar is naturally rot resistant and the location is not a constant wet area like the bilge.

@danielgjorgjieski783 3 года назад

Hello. How many boats have you built?

@horatiohornblower868 3 года назад

daniel gjorgjieski It's his very first one, but others will follow he promised.

@TheArtofBoatBuilding 3 года назад

Two!

@pcahill10 3 года назад

How are you going to find time to talk with 28K fans?

@TheArtofBoatBuilding 3 года назад

Indeed, Limited to 50

@thomasarussellsr 3 года назад

FCFS -50 SPOTS.

@Pocketfarmer1 3 года назад

marine grade plywood is not what you think it should be. It is not inherently waterproof. It is mostly made of hard wood veneers. Any voids are cut out and filled. It is therefore strong than construction grade. The wood is not treated .The glue between the layers may be waterproof, but You have to seal the edges .Water will get in , swell the wood and delaminate the whole thing. Luan is also known as Philippean mahogany and may have been what was referred Toni the plans. Luan plywood was around way back in ‘85. The exterior grade is as water proof as marine grade. Again sealing the edges with epoxy is crucial. Paint the sides so it can breath and vent moisture. Seal the edges against wicking. Good luck.

@TheArtofBoatBuilding 3 года назад

You might have missed that the decks will be water proofed with canvas covering and that I mentioned that I will be sealing the plywood edges with a wood strip. I appreciate your concern, however, stay tuned the decks aren't finished yet! Thanks for watching. Cheers

@olatedin 3 года назад

My (retired) boat building friend would go b a l i s t i c if he'd seen all those screw heads NOT aligned with the grain direction. (me, I'm eclectic :)

@horatiohornblower868 3 года назад

Those screw heads will be covered by canvas. I'm pretty sure Bob will fill them beforehand.

@sunny71169 3 года назад

I was thinking the same, but since they will be filled with fairing compound, (I think) and then canvassed over, why bother? That said, OCD would probably have made me do it too. All the slots in my outlet and switch covers in the house are aligned fore & aft. :o(

@CorwynGC 3 года назад

Why is it more important to have the screw slots lined up, rather than having the screws at precisely the right tightness?