Bobcat Axle Bearings and Chain Case Repair

Подписаться 27 тыс.

Просмотров 72 тыс.

50% 1

Bobcat 753 with damaged axle and hub. This is how I repair an axle and replace bearings and seals.
To schedule a consultation: www.4tetradgro...
www.4tetradgro...
1 1/8 Gearwrench ratcheting wrench: amzn.to/3xsHRAN
Wrench Extender: amzn.to/3NZrfaS
Bearing Puller set: amzn.to/3mOJiVg
Best work gloves: amzn.to/39sgLlj
Tools We Use:
Hydraulic Cylinder Spanner amzn.to/3SAlHYw
Another Spanner Option amzn.to/3LR1JFb
Hydraulic Seal Clasper www.4tetradgro...
Hydraulic Seal Stretcher www.4tetradgro...
Injector Block Off Cap www.4tetradgro...
Bobcat Fuel Filter Bowl Wrench www.4tetradgro...
Wrench Extender amzn.to/3Yt2yvl
Spring Compressor Tool amzn.to/4fA030n
Hydraulic Seal Installation Kit amzn.to/3Yrs6sV
Hand Impact Tool amzn.to/3Sz0yOk
Common Rail Fuel Injector Test Kit amzn.to/4dasD6T
Injector Leak Back Test Kit amzn.to/46Btf3i
Electrical Supplies:
Milwaukee Solder Iron amzn.to/4dpp0cY
Tesa Harness Tape amzn.to/3SAdG60
X Fasten Harness Tape amzn.to/4cbItNA
Non-Insulated Terminals amzn.to/4dp18XH
Short / Open Tester Power Probe amzn.to/3WRdrpu
Power Probe Master Kit amzn.to/3WPETUR
Shop Supplies:
Gloveworks Nitrile Gloves amzn.to/3WADdwW
Oil Absorbent Pads amzn.to/4ckYq48
Absorbent Pads amzn.to/3WOX64P
Brake Cleaner (Its Really Good) amzn.to/3yse3sA
#howididit #bobcat #bobcatrepair

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@andrewgibson1991 Месяц назад

Your one of the best RU-vidrs out here man your down to earth no bull shit content is so enjoyable thanks for all you do brother

@VICENTETENEMPAGUAY 2 месяца назад

I´m having a hard time with my bobcat S250 it seems to be the bearings but your video is helping me a lot thanks man.

@coltenjm10 2 года назад

Great video, thank you for the in-depth detail, and being realistic on how to do it. Very nice video!

@Ozzy_Discerns 8 месяцев назад

I never comment, but great work and explanation. Thank you.

@6x-phoenix77 3 месяца назад

Very good, instructional video. Thanks

@drycreek3204 3 месяца назад

Great video! I watched it a year ago & rewatched it again because I have to open up my 95 763 because of seal leaks on both right axles & now probably bearings. 1 seal just started pouring. Are all models inner axle bolts 1- 1/8" ? TIA

@mikeyg9619 2 года назад

Great video as usual you make it look easy. As an owner of a 7753, I can tell you, your videos are such a huge help. Thanks much.

@tetradgroup 2 года назад

Thanks 👍

@drycreek3204 2 года назад

Thanks for another great video! What weight hydraulic fluid do you recommend for a 1995 763 C series, Bobcat or any substitutes?

@tetradgroup 2 года назад

AW46 is a good alternative for the 763

@fredygarcia353 5 месяцев назад

Excuse me for a question, what is the exact size of the key?

@ExploringCabinsandMines 10 месяцев назад

Is my Bobcat 631 mostly the same ?

@brianmceneaney4266 2 года назад

On a S250 , for the same job does the body need to be lifted off the case? getting the rear cover off requires all the hydro plumbing to be removed? thanks.

@sebastianskrzypczak1956 2 года назад

good morning, I have a problem with the bobocat 863, specifically with the working hydraulics not working, the oil pressure, oil temperature and hydraulic fluid pressure and hydraulic fluid temperature controls are on

@tetradgroup 2 года назад

For more a more individual and detailed response, please visit our website to contact us. www.4tetradgroup.com

@joelsmith5886 Год назад

Nice video would you happen to know would this video be helpful to me when working on my S205 which is a good bit newer than that 753? Are the drive systems somewhat similar?

@tetradgroup Год назад

Very similar process

@joelsmith5886 Год назад

@@tetradgroup thanks

@b.malnit8983 11 месяцев назад

Wow. Time for an extra pair of hands.

@garymallard4699 5 месяцев назад

🇨🇦🤓🤟

@steveashworth6707 Месяц назад

Great video! I learned a lot!. I started out on the old M-600's, belt driven with a Wisconsin air cooled engine back in the 70's. Today @ 68 yrs old I still own a s185 bobcat one the most handy machines around!. I still work on my equipment and vehicles myself and I must say your videos are very helpful especially at today's prices.

@antoniotroncoso8232 2 месяца назад

Bro you don’t even get dirty and you just did a big job, you can go to church after that with the same clothes 👍🤣

@antoniotroncoso8232 Месяц назад

What kind of oil are you using?

@terrylundquist2646 2 года назад

Very informative video. I recently installed new axle bearings, races, seals, sprockets and chains on one side in my S300. With the help of your great advice, I was able to get it done. You are so knowledgeable, and I am so jealous.lol. Thanks for all the information you share.

@tetradgroup 2 года назад

Great to hear and thank you so much.

@antoniotroncoso8232 Месяц назад

Thanks for sharing your knowledge brother your videos helped me a lot God bless you

@oiu7890 5 месяцев назад

Is the machining of the tubes, axles, sprockets, cups and bearings that exact that no shims are needed to set the rolling torque of the axle? 🤔🧐

@cjjohnson5924 25 дней назад

Great video and could you tell me if the process is the same for my little 463? Ty

@gregbannish8423 Год назад

Very helpful, similar to my 743 but there is less access to the rear chaincase on my 743, and hub and axle are 1 piece. The hardest parts for me was getting the sprocket back onto the axle, you made it look easy! And getting the seal installed straight and seated, since my hub was in the way. I didn't replace the inner race because I thought would be too hard to install, didn't know your trick with dry ice!

@stumper798 8 месяцев назад

I tryed to get to talk to you but cant make your time frame, S175 will the lift tilt valve solenoid coil, make the bucket dump and not hold, but i can tilt the bucket down on the ground and pick the cat up but does not leak down, I have no leaks on the valve body

@fernandezcastilloguzman4126 5 месяцев назад

Eres un crackk..mís respetos ....saludos desde Perú....

@gunfisher4661 2 года назад

Brought to mind messing with early 70 mod. cats with the wide drive belt and variable action pulley for speed adjustment. Wisconsin motors they were still the cats meow back in the day. We had one with a single cly. Wisconsin motor. Should have said engine you know the rule.

@jamescampos184 11 месяцев назад

Dag nabbit, you make it look so darn easy. Great job, keep those videos coming. Thank you again.

@tomaszmaslany9848 Год назад

Klick Klick. Very helpful video

@CHERYLHEDDELL Год назад

I didn't realize that after guessing on the torque that going "click click" would certify the correct torque. Great to know that after all the years of guessing. On a serious note, I would tighten a simular nut to get the feel of it and then tighten the nut to tighten. Good video as usual. John

@kylejones2075 2 года назад

That's why I use a piece of fence pipe they're free usually I make all different sizes my smash the ends to go over the open end wrenches I get more leverage that way in an old lady I need all the help I can get

@Jeff-e3i 26 дней назад

Thanx buddy...you are the best..💯

@michaelj.dubritz7478 Год назад

Thanks for posting. I just picked up a 753 and the right front axle was leaking.. using this video, I fixed it! Only thing I did differently was use a slide hammer to remove the outer race. I had to buy the wrench and wrench extender, but now I have them.. Thanks again.

@ExploringCabinsandMines 10 месяцев назад

Are those Spacely sprockets ?

@egghead2000TJ Год назад

Dry Ice....who knew !! I would always put similar parts in the shop freezer. I'm sure the dry ice gives it that extra shrinkage to make the job that much easier. Great video !!

@tetradgroup Год назад

Glad you liked it

@blorph1 Год назад

Super video. Don't own a Bobcat but when I saw the title of the video I just had to see how you did this. Wanted to up vote and comment but had watched it on TV so couldn't. But took the time to find it on the computer so I could commend you and up vote. Thanks again.

@Darenator1 2 года назад

You mentioned you re-sealed the cover plates. Is that new gaskets? (Is there actually a gasket?) Or just some rtv?

@tetradgroup 2 года назад

Gaskets do exist from Bobcat however I always reseal with just RTV silicone.

@Darenator1 2 года назад

@@tetradgroup Thanks for the info!

@bigspoon8219 Год назад

What kind of fluid goes in here ad how much I just got a 1995 753 I'm fixing up

@tetradgroup Год назад

753 will hold about 8 gallons. You can use any hydraulic oil, engine oil or a universal tractor fluid.

@bigspoon8219 Год назад

I heard just regular motor old I was not sure 10x30 here I come haha

@heyderricardo5035 Год назад

Make a video showing how you change this chain oil I'm from Brazil

@naj370 Год назад

anyone know where I can get a hub? bobcat discontinued the 6706075 hub.

@DonAlanWilson 5 месяцев назад

I have a machine I bought several years ago that I needed to change the axle shaft and the video was helpfull

@grasshoppercb Год назад

Thanks for the info, very big helping haven't started yet so maybe tomorrow I'll dive in

@Jimo225 2 года назад

I got a 773. one of the rollers, (the thing that touches the sprocket), was brocken off the chain and laying at the bottom of the case. I been using the machine like that but am worried that chain will break soon if I dont' replace it. You ever have the roller piece break off a chain like that?

@GFmartell Год назад

Great video and very informative! I was wondering if those bolts inside the chain box are counterclockwise or clockwise in order to loosen them.

@naj370 Год назад

thanks for the video, Have a 7753, same axel same problem worse damage. Parts are ordered, hopefully goes as well.

@SteveDoesEverything Год назад

Im presuming I need to do this to my 763, Front wheel skips and wobbles when tugged on.

@tetradgroup Год назад

Easy job for you you my friend.

@SteveDoesEverything Год назад

I’ve gotta do this on my 763. Front left axle is jumping and wobbly. Looks like a convoluted process😂

@tetradgroup Год назад

Easy job for you, glad to hear form you again, hope all is well.

@sam_lulut9416 2 года назад

Sir, what tools are used for rachet to continue the pass ring? where I can buy. thank you greetings from Indonesia

@davidespinoza6461 11 месяцев назад

Great video body, thanks much.

@440capnhook Год назад

They make box end torque wrenches for jobs like that.

@imp63 Год назад

Muchas Gracias!!! Hemos resuelto varios problemas, saludos desde mexico 🎉

@mitch500 6 месяцев назад

i loved the "click click" internal torque wrench hahah

@PerryOates Год назад

great video,need to do my 2 front axels so this helps great.tkks

@kylejones2075 2 года назад

Your reminiscent of my former bobcat mechanic it would come and fix everything for me nice job thanks for sharing

@estevanmendoza1170 Год назад

What brand is that Extendable 1/2” ratchet??

@arctec223xc Год назад

Can you do a video on setting up the hand controls on a older 753

@fernandoresendiz9615 2 года назад

Nice vídeo and job, thanks a lot for sharing your experiences.

@MikeHoffman-t5l Год назад

One inch 3/4 threaded rod works great

@wxfield Год назад

"Honey?! Have you seen my good Teflon pot..I want to boil some macaroni to make a salad tonight!"

@birddogtrail 6 месяцев назад

Wtf 😂

@michaelnotary5205 Год назад

.. and you're not a little guy.

@diggerdirk1985 4 месяца назад

You make it look so easy.

@RTMobile-t9h 6 месяцев назад

Nice work 👍🏻

@tybyler4803 Год назад

Excellent video

@wadeseymour7706 Год назад

You the man!!

@lukemorley7481 Год назад

ALL Right😮

@chevyduramax9674 Год назад

Love your videos.

@ralphfrench2924 Год назад

👍🏼

@Order-in-Chaos Год назад

Hello there, great video. Perfect tips. I'm about to tackle an S300 rebuild, there's what appears to be a water cooling hose about 1.5" round in the way and other 3/4" hoses connected to some sort of a pump right on top of the cover. Also the 4 large hoses (hydraulics maybe) in the center are kind of closer together than what you have in your machine. Do I have to remove these hoses? All of them or which ones? I'd appreciate your input if you've ever worked on an S300. Thanks pal.

@stephenrountes Год назад

Those are all going to be hydraulic hoses, it makes the job a ton easier if they are removed. I’ve had some luck using zip ties to hold stubborn hoses out of you way on jobs like this 👍

@Order-in-Chaos Год назад

@@stephenrountes Thanks Steve, I was hoping there's a way without going through disconneding these hoses because they have larger than normal nuts which require me to purchase large wrenches but I guess there's no way around that. I'm going to tackle this job soon. Thanks again Steve for your input. God bless and Merry Christmas to you and your loved ones.

@stephenrountes Год назад

@@Order-in-Chaos Having a few wrenches bigger that 15/16ths is great when you own a bobcat. 1 1/6, 1 1/8, 1 1/4 and 1 1/2 are the only ones you should need. Merry Christmas and happy new year to you and your loved ones as well!

@Jimo225 2 года назад

i thought it was bad to use a gear wrench to break a bolt?

@lanieeve1485 2 года назад

some times they brake first...it's better to use a wrench just to loosen bolts...base on my experience.

@lukemorley7481 2 года назад

Great stuff 😅

@FrequencyOfThought 2 года назад

My 843 was designed with a one piece axle, then the last model of the series they decided to switch to a 2 piece, so instead of just replacing the oil seal. you have to remove all the controls and plates where your legs go, my machine was so rusted it took me 3 days to get to the chain case. Then if you want to remove the rear axles you gotta pull all the pumps from the belly... What a joke... Someday I will replace the back 2 axles with the later model ones... Some day.

@Pogimo68 Год назад

I bought a 533 and am going through all what you said. Everything has to come out and I had to cut the big hydraulic hoses (3 out of 4) all this to replace leaking seals. My left side is leaking so I have to do the back. Those axel bolts at the sprockets are giving me problems. But once it’s done it should be great. It would have been so nice just to take the hubs off and replace the seals. Good luck with your machine

@FrequencyOfThought Год назад

@@Pogimo68 I finally got mine running with a repower using an ISUZU generator engine 2.4l.. Then I decided to power wash it and the power washer eroded an access plate on the belly of one of the hydropumps causing it to leak. Now I have it in pieces and rebuilding that pump and had to locate a new casing for the pump.... Long story short I am ending up replacing almost every single hose in the belly and hard lines too.. What a PIA. But at least if I have to service it again those hoses will come off without the force of God F my life..

@frankrobbins6680 6 месяцев назад

The 843 is that big of a job? Remove pumps?

@Rprecision 2 года назад

Thank you for the tutorial, looks like my 763 is the same. What's your preference for chain case oil, manual says bobcat hydraulic fluid.

@tetradgroup 2 года назад

Thanks for the comment. I personally use whatever is available at the time. It's just a chain case and bearings. I think any AW32 or AW46 would be fine. I just filled this chain case with motor oil. Bobcat is selling their 2.5 gallon hydraulic oil for $80 so that would have cost me $320 to fill the case.

@Rprecision 2 года назад

@@tetradgroup exactly my thoughts!

@greatvalleyone 2 года назад

@@tetradgroup 10W40 is what I have seen as a substitute.

@jjwoodartterracebc Год назад

your videos are awesome! thank you for your time!

@tetradgroup Год назад

I appreciate that!

@roosbeltlinodelacruz4339 2 года назад

@lucyandjumper7558 2 года назад

Great vid!!

@rudyreyna5202 Год назад

Great content! How many hours would you say it takes to do the job in the video?

@tetradgroup Год назад

Depending on machine anywhere between 4-6 hours

@rudyreyna5202 Год назад

@@tetradgroup thank you so much for the response! So would you say 8-10 for both sides on a 753?

@tetradgroup Год назад

@@rudyreyna5202 exactly, once everything is opened up the other axles go faster. All 4 can be done in 8-10 hours

@williammontoya2517 2 года назад

Nice job thanks for sharing the info

@tetradgroup 2 года назад

You bet

@bobcat8439 2 года назад

I learn a lot from ur videos ur a master machanic 🔧🛠️⚒️⚙️ great teacher too

@tetradgroup 2 года назад

Thanks 👍

@bobcat8439 2 года назад

@@tetradgroup I'm from little italy days east rochester we wait to for bull shit then win

@bobcat8439 2 года назад

@@tetradgroup the people crossed the border make it where we be biker tough guy bar ny

@bobcat8439 2 года назад

@@tetradgroup im a roofer and a mason carpenter roofer on a and on I'm deep in the hood with my pitbulls to stop scumbag DemocRATs from east rochester little italy

@bobcat8439 2 года назад

@@tetradgroup we from little italy days