Bobcat Hydrostatic Pump, Everything you need to know. 

Great video as usual. You are the go to guy! I noticed in the video where you went thru the pressure relief/replenishing valves that large, top most o-ring was missing. Are these not necessary? With it on it seems impossible to get the valve back in! The pump is still in my 883 and it was miserable getting it out also! Im hoping this bigger oring is just for keeping dirt out.

I love how these companies work, they make it too expensive to fix your own bought and owned property yourself. Pump needs a few parts and you might as well buy a whole new pump. Ridiculous. Someday the only people who will be able to afford equipment at all will be huge companies.

Very helpful and educational video 2👍🏼👍🏼

Would like to see a tear down of an R series manual control machine. Haven’t had to do one yet. Just had to do one on an SJC R series machine. Assume it’s not too much different.

Looks like I’m leaking out of the top of the left side of the machine pump. Can I just replace the seal while in the machine?

I always enjoy watching and learning from your content. I work for a rental fleet that’s Primarily Bobcat equipment, I’ve referenced serval of your videos while diaging equipment. Just wanted to say thanks and I’m always looking forward to the next video!

Good content but in reality those slippers on the pistons could be lapped, same with the pistons and the cylinder and the valve plate. Effectively putting the pump back to good working condition for far less than a rebuild pump.

That look like a Hydraulic travis/travel drive.

When you have to watch a bobcat tech tear apart pumps and motors to see how they work and come apart to try and figure out how to fix a jcb( which the pumps and motors look almost identical btw) because there is no videos on a jcb

👍

I have hydraulic fluid pushing out of a green cap on the drivers right side of the machine. Can’t seem to find what this pump is called and a video on replacing it/rebuilding it. I have a picture but can’t send it on here.

HAVE YOU EVER REBUILT ONE OF THOSE? CAN THEY BE REBUILT OR IS IT A PUMP YOU SIMPLY REPLACE WHEN IT GIVES TEOUBLE?

I have a small bobcat loader S70 it seems to be very slow lifting or tilting the bucket and also weak struggles to lift half a bucket of dirt, however driving forward or backward it is strong and quick no issues at all, would this be a problem with the pump or maybe hydraulic control valve looking for some help thanks Frank

So i dont have these parts in my hand but as a toolmaker I would hope that some, maybe all of these wear parts could be made. Some tools beyond a mill and lathe you may need are an id od grinder and tools to measure a high resolution of tolerance. You may also need to farm out some edm or wire work for the hardened parts and heat treat will need to be outfitted or farmed out

They don’t want us rebuilding anything these days 😢😢😢

Pode me passar en português

Hi, I really appreciate your videos. I have a Bobcat 753 that I got used and it looks like it rolled down a mountain but functions relatively. One issue is that the hydraulics are choppy, like when turning it is not smooth, but jerky, also sometimes the auxiliary buttons stick. Is a pump rebuild like in this video what you would recommend as a starting point? Do you have any other advice to make it run smoothly? Thanks so much if you respond!

Sir where are you located at? I love to have an expert mechanic for my bobcat for repairs. I am at Atlanta. And how do I find independent people like you in my area? It would be great help for your subscribers in desperate need of getting out of the chokehold of dealers. Your response very much appreciated. Another suggestion is there is really no real guidance online for repair places, people and prices for reference. Your channel would get a great boost if you can provide that.

I have a Bobcat T190 when I open the 4 in 1 bucket it starts to close by itself what could be the problem

I have that same unit and it leaks from the Bottom “where you can see of course “ when it warms up. Everything works fine , I just keeps adding fluid. Getting bad. What’s the first thing I should look at? With a scope, it looks like it’s coming from the very center of the unit, between the right and left pump. Any advice would be awesome love the video, thanks

I am getting a mid tone whining sound from my hydrostatic pump could this mean there is air in the line? I have a Bobcat 440b

Can you flip that thin swash plate and use the other side?

Brilliant videos i have a 553 2006 model its split the casting on the hydraulic pump tonight i thought id blew a pipe under the seat but thats whats happened why would this happen has me totally confused

Please do a video on the M46 servo assist hydrostatic pump. A bunch of us still rock the older iron like the 873 C and F series

One doubt how to check hydrostatic pump pressure pls help me

How can I become your apprentice?, will move from Canada

Can the pump shaft be removed while still attached in the machine? I recently changed the shaft seal in my t300 while everything still in the machine. After getting it all back together and running it, 3 hours later it started leaking again. I’m wondering if my shaft where the seal goes is possibly worn down causing an oem seal to not actually seal

I’ve put silicone over the high pressure relief valve plug to keep it from rusting 😊😊

Useful!

Can someone please answer a question for me? I took the tandem hydrostatic pump off my 1993 bobcat 853 to have it looked at because it was leaking really bad at a factory seam on the front left side. I dropped it off an all I wanted them to do is tell me if was fixable or not. They stripped it all the way down to the very last bolt without my permission took them about an hour to do so, at 150 an hour. Now they wanna charge 600 to 800 to put it all back together (WITHOUT FIXING IT) Now I'm stuck with 3 full boxes of hydraulic pump parts that I don't know W.T.F. to do with. or even where to start to put it back together. I'm pissed as hell they automatically assumed I was gonna have them fix it. Any suggestions about what I should do cause it will cost at least 5k for a remanded one. I don't have that kind of money. Should I sue them in small claims court? All I want them to do is fix it and put it all back together at no cost to me. I don't want to get any money from them. I just want it put together an that would be good enough for me. They also told me it was done when I called. An fixed on the phone when it wasn't. So now I'm stuck with a bobcat that has no motor in it because I had to pull it all the way out just to get to the pump. So I have no bobcat an 3 boxes of hydraulic parts. Did they really have to tare it all the way done like that? Or are they being ASSHOLES? feels like entrapment...

Спасибо большое.если можно зделай видео про хайфловый насосс

If these pumps drive your wheels? What supplies pressure to your axillary lines? Example., What pumps pressure to spin the blades of a rotary cutter / Brush cutter? (Bobcat 863G)

Well timed video for me as my right side drive is seemingly losing strength. I can direct my mechanic to this video as a baseline; and possibly have him at least check the Hydraulic Pressure relief valves and for wear on the valve plate and swash plates. S185

Where in Kenya do I get parts?

Thank you so much for a excellent video. I have an old JD 125H I'm about to tear into. I'm worried about parts for it because it's so old. If the trust plate washer is worn on one side, can it be flipped to the other side if no parts available for it?

How to remove it??

Is there a way to fill or prime the pump after install so it doesn’t start dry?

Surgery here guys so clean

Very good

Very smart

Parabéns pelo trabalho 🇧🇷

Tack!

Thanks!

Nice instruction video. Subbed. Bobcat 753 C series here. Personal use, not business.

Lucky me, I got to rebuild my Hydrostatic Pump over the winter of 2022-2023 off my T320. The right side was trashed from running with no oil due to a blown O-ring on the gear pump face. Expensive rebuild, but still cheaper than buying a new or rebuilt pump. So while this video came out after I was done, this was exactly what you do.