Bobcat Hydraulic Lift Cylinder Leaking on my T300. How to remove, reseal, and put back together.

Подписаться 25 тыс.

Просмотров 64 тыс.

50% 1

Bobcat hydraulic cylinder leaking on my T300 vertical lift machine. How to reseal the cylinder without removing the barrel. Vertical lift machines seem to leak more often than radial lift machines.
To schedule a consultation: www.4tetradgroup.com/consulta...
www.4tetradgroup.com
www.tetradcycles.com
/ tetradgroupllc
/ tetradcycles
Check out our new podcast where we discuss Bobcat and other compact construction equipment.
spotifyanchor-web.app.link/e/...
Amazon affiliate links:
Spanner wrench (Toyota timing) amzn.to/3lNAwXp
More affordable spanner amzn.to/3EjOMPE
Gland pin spanner amzn.to/31ATA4q
Hydraulic cylinder seal installation tool amzn.to/3dzC6Yq
#bobcatrepair #howididit #bobcat

Авто/Мото

Опубликовано:

6 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 337

@fallenx6735 Год назад

I worked as a cylinder tech for 5 years. I have a couple of tips for you. 1. Invest in smaller picks for more control, When peeling seals out. If you make a burr, the oil will follow it to bypass seals. 2. Flathead screwdrivers work wonders when putting in the u-seal. Feed the u-seal into the groove, and when the last little bit is sticking up use a wide flathead to push the rest down. 3. If you do make a burr with your big pick, you can use alittle sand paper to level it out, don’t over do it. 4. If you have burrs or pitting on your rod, you can polish them out. That’s what usually chews through the u-seal.

@jerrysmith9780 2 года назад

You just took the mystery out of replacing seals in the lift arms. I've always removed the entire cylinder and brought it to a hydraulic shop. The next one I'm going to try on my own. Thank you. Your Bobcat videos are amazing. Bobcat should pay you since you're teaching Bobcat owners like myself to become more familiar and comfortable with owning our Bobcat equipment.

@hightopliving4922 2 года назад

and????

@StephenfCarman Месяц назад

Thanks, very much! My cylinder just blew out on my 773, squirting hydraulic fluid all over *everything*, but after watching this video, I feel like I can do my own. Thanks, so much!!!

@MarcoGuzman-sn1wv Месяц назад

Thank you for your video. It’s very explicit. I have to replace the gasket in a piston and before I watched your video I didn’t have any idea about how to do it. Now I know how thanks to you. Thank you for sharing. God bless you.

@jakeduffin4626 2 года назад

Really appreciate you making these videos and sharing your knowledge!

@ccwh40 2 года назад

Great video! T300 looks well taken care of!

@petevanrooy9680 13 дней назад

Love your videos for the guys that like to try and do things on their own. I’ve learned a lot from your videos. Thank you

@user-le8cc7lq1s 10 месяцев назад

#1 out of 45 Hydraulic Lift Cylinder DIY repair video in the wild and probably the best self-help video in 12+ years. Direct to the point explanation, supported by best and safe industry practices - zero fluff. You are an expert at your craft; job well done! P.S. Going to tackle replacing the manual release valve. An overview on that would be great.

@davidianero5528 Год назад

Love the videos it helps a lot on all equipment not just bobcats

@AlwaysBored123 Год назад

Great video. Thanks for the thorough yet concise tutorial. Also appreciate the clear video and audio that helps a lot.

@timlatham9415 5 месяцев назад

Really enjoy your videos, you explain to great detail.

@bbdallas1 2 года назад

Your videos are great great. Very detailed and clearly. Best of the best. Learning a lot from Thank you for sharing.

@j.g.a.gonzalez8466 9 месяцев назад

Thanks so much for the insight I couldn't have done this without your video

@joseesparza9706 7 месяцев назад

Simple enough, simply explanation, awesome!

@renecaners4063 2 года назад

Great video and straight forward how to's. Don't change you're format!

@stevewatkin1632 2 года назад

Excellent job on a very helpful, easy to understand tutorial. I thank you and my 773G thanks you!

@awhetzel268 Год назад

Thx for the video. Could not have done it without you

@jimhoelle4013 2 года назад

You are really good at presenting this in a clear and complete way. I'm going to do it on my T190. Thanks immensely.

@jasinarlen8650 2 года назад

This is awesome! In depth, clear to the point and appreciated. 👍

@tetradgroup Год назад

Glad it was helpful!

@hummervee3395 4 месяца назад

Great information! I really like the way you explain the process. Thanks for taking the time to share.

@dgb5820 Год назад

Brody great tips and fantastic video

@garygreen5243 Год назад

Man very informative video well done buddy I need this done on my bobcat

@JimHowDigsDirt 2 года назад

Thank you for sharing this how to with us! Now I know what to do to replace the seals on my T190. It's much easier than I thought.

@demartinsm8479 2 года назад

I've been waiting for my mechanic buddy to come over and help me with this? Ha! I'm on this...Thanks for taking the time to show this common fix. Subscribing!

@vternal 2 года назад

Very clear and concise instructions. This will really help us fix up our t320 that has just been pouring out fluid from that lift piston. Thank you for a great, informative video.

@j31355a Год назад

Thank you for posting an incredibly clear and concise video on how to perform this service job. You certainly have given me the confidence to attempt it. Liked and subscribed.

@eddiedutcher5965 5 месяцев назад

I appreciate your videos. I've just started working on Bobcats at work and you've been a MASSIVE help. Thank you!

@Modernexodus1 2 года назад

T300's are the best machines! Great video!

@Mr.frag-out Год назад

No we really appriciate you doing these videos for us thanks

@ericching9266 Месяц назад

I have many Bobcats so your videos are so very helpful. Thank you Sir!

@jerrywilder9403 2 года назад

Very good instructions and good info on the Toyota cam tool

@shaynethomas4257 Год назад

My first video of yours. I like it personally when when an instructor teaches things in the ABC manner . I’ll definitely subscribe and watch more.thx for the free knowledge

@timwhitford2888 Год назад

Excellent presentation! Very helpful

@jrac863 2 года назад

Turning out to be one of my favorite channels.And your right those gland nut wrenches are a pain in the butt I bought the otc1266 gland nut wrench and the Toyota spanner wrench u have there and I only use the Toyota spanner.Another great video

@ericfraser7543 2 года назад

This is my next job... thanks for the pointer to that spanner wrench.

@spatton7875 Год назад

Don’t currently own a bobcat but I’ve fixed several problems on my equipment with the info you share. I appreciate you taking the time to do these videos.

@StoutCustom 2 года назад

Great video! Exactly what I needed to see in order to do mine on my s250. Thanks for taking the time to make the videos and share your knowledge. Please keep it up! Definitely the best bobcat tutorials on RU-vid!

@tetradgroup 2 года назад

Thank you so much! Glad I could help.

@megavoltelectrocycles 10 месяцев назад

Id hardly say your an amateur. I blew my deal trying to dig a stump out and overworked the lift arms i guess on my ‘14 T650. This vid is helping me tons. Thanks a lot !

@louiscripps8253 8 месяцев назад

Thank you for giving me the confidence to do it myself on my old tractor bucket lift

@victoryvisiontour Год назад

Detailed explanation yet easy to understand. Your video clarity is very good so I can see clearly what you are doing. Thank you very much for these informative videos.

@pavermakeover Год назад

Great job on how to do this. I was fixing to go remove the cylinders and take to a shop. Now I am just going to replace the seals myself. Thank you very much for taking the time to film this.

@terrylundquist2646 2 года назад

As always, great video. I'm plugging away on an S300, and really enjoy learning from you. My big chore coming up is replacing the lift arm assembly, what fun. Thank you.

@Marito-lk4cw 3 месяца назад

Great and clean job sir 💯

@SteveDoesEverything 2 года назад

Man. You make that look easy. Great job

@awhetzel268 Год назад

Great video. Able to fix my 873 on my own. Fixed my fuel problem using your video also Thx so much!

@Lee-tj8bn 2 года назад

Great video! The last pair of these I did I left it on the machine like you. Your videos are very well done and without a bunch of fluff or off-topic BS. Thanks for the link to the spanner wrench... I just added one to my Amazon cart. I use (used) the u-shaped one with a cargo strap to hold it onto the gland... what a PITA.

@wiscano Год назад

Your expertise and methodology is second to none. I have a 642B that I purchased all the parts for to add auxiliary hydraulics and its videos like yours that help us 1st time bobcat owners tremendously. I wish you nothing but good things for your generosity.

@davidkrull1709 2 года назад

Very helpful ! I probably could have made it through my cylinder repack but nice to double check my work 😉

@Mieuss Год назад

Glad to know for when I need to do mine. Your videos so far have taught me to replace tensioner on drive belt and now I’ve fell in a rabbit hole watching all your videos so I’m prepared for next problem. Thank you sir

@MrGixxer11 2 года назад

Great video I just did these on my 773. Bit I did take out the whole cylinder. Wish I had seen this video before. I'm subbed in now so i will try to keep up. Lift arm bushings are my next project. Thanks

@timmay676 2 года назад

Thank you for your kindness and your consideration for the interest in helping those of us who are the " newbies "👍👍👍🙏🏻🙏🏻🙏🏻✊✊✊

@williamgodden2476 3 месяца назад

Awesome took me half an hour and save me hundreds thanks. P.s nice shart at 50 seconds, had me in tears brother!

@christianadanparedescarden3877 Год назад

Thanks a lot for your videos, very helpful and you explain pretty good! I suscribe

@KittenCloudX Год назад

i have learn so much and you make it look so easy thank you for sharing wisdom and humility

@tetradgroup Год назад

Glad to help

@noeltrejo2201 Год назад

This has helped me out a lot. Thank you

@flfoxkrew9862 2 года назад

It amazes me how quickly you did the lift cylinder. I’ve always done mine the hard way by taking out the whole cylinder. So I’m definitely the amateur. Thank you again for your professional videos

@dscripps 9 месяцев назад

Watched your video to change out the seals in my T190. I appreciate your detailed content! I’m not a mechanic, but can follow directions. You saved me a ton of money! Thank you!!

@andrewgable7273 2 года назад

That was great!!! Thanks for sharing this process with us. Appreciate it, a lot!!! BTW, you are no amateur, a very skilled and knowledgeable technician is more on point!

@brianwarner385 Год назад

Well done. Had just redone a tilt, and had moved onto the lift... Didn't even think of being able to slide it out and up... was trying to figure out how to get it farther up to get the piston out. Thanks a bunch!

@escobaroutdoors3693 2 года назад

Great explanation man! Clear quality too! Great work!! Working on my S530 through your tips and tricks!

@tetradgroup Год назад

Glad to help!

@nickeyhicks9288 Год назад

Great video details on a repair is everything.

@badzioch64 Год назад

Love watching a skilled craftsmen. Kudos 👏

@tetradgroup Год назад

Thank you

@motionclone231 2 года назад

Thanks for this video. Just bought a t300 with minor leaks at these lift cylinders. A job ill probably tackle this winter.

@TheDavidarlen 5 месяцев назад

Thanks helps a lot I have a few cylinders on my Bobcat E35

@paulmauer9794 3 месяца назад

Getting ready to replace the seals on my 773. Watching a few of these vids first. This is the best one I've seen so far. Hopefully my project goes as smooth as yours.

@883mustang Год назад

Im watching these videos of yours at 1 am lol, and you do an awesome job! I love running bobcat loaders but was always worried how to work on them when they break down. You make it look so easy, it makes me less nervous about actually owning one! Keep up the great work and videos!

@vicslick122000 Год назад

Same… 😂

@DavidG-dm9wv Год назад

Super excited I found this video. Was going to pull the hole thing and send it off. I can easily do this on my own assuming the top part unscrew that easy.

@smooth247fyi Год назад

Great video! Thanks for posting!

@jimcox6661 Год назад

You certainly make it look easy and I'm sure you took a lot of confusion out of the endeavor that I'm about to take on. Besides the knowledge it's really nice to watch your video with no belligerent talk or obscene music in the background overriding your voice. Thank you

@sahmadi1000 Год назад

This is the smartest method that I have seen. I have a cylinder in hyd shop. When I get tired of waiting for them to get to it, I will use what I learned from you and try to do it myself. THANKS

@jorgeortega1420 Год назад

Very clean job Sr thanks for sharing your knowledge 🫡

@plainandsimple1 Год назад

Well, my t750 has a leaking cylinder on the same side. Glad I found this because I was gonna remove the whole damn thing and do it on a bench like you. Thanks for the video and making this 100x easier on me!

@martyp.992 2 года назад

Well done sir. Thank you! You have a new subscriber!

@Marine1-qo1ig 4 месяца назад

Keep the T300 videos coming I just bought one and she’ll need some attention here and there..

@jaybutters6382 16 дней назад

NIce detail! Thank you

@BryceReid1 Год назад

Thank you for this video. I have a T190 I am doing. This really helps

@tetradgroup Год назад

Glad to hear it!

@kylejohnson7464 2 года назад

Thanks for another very helpful video . Looking forward to a T300 pump shaft seal video ....

@tetradgroup 2 года назад

Thanks for the idea!

@opuntina 2 года назад

Good timing. I'm about to do this on the right side of a s250. Just need to get the OTC tool for the gland nut.

@size-matters Год назад

Thanks for the video. Both mine are leaking on my S300. Seems like an easy fix. I just ordered the OTC tool on Amazon.

@bigskypatriot7515 2 года назад

Perfect timing, I have one of these to do today and have never done one before. You should do a video outlining the potential hazards of working on bobcats and how to be safe.

@nighthawk1889 Год назад

I’m not a mechanic or a heavy equipment mechanic but I like to watch ur Videos and Learn more!

@marcosarboleda6081 Год назад

Amazing teacher!!! Easy to understand the way you do it looks like is easy but I know take a lot practice and experience thank you for the video

@tetradgroup Год назад

Glad it was helpful!

@Irjdunn1 7 месяцев назад

bought an ugly sunbelt bobcat, green of course, and watching this to see how easy the bigger cylinders can come off for disassembling/paint. learning a few things along the way. also building a steel barndo in a few weeks and think i'll pick up one of those milwaukees! :)

@justinwiatrek1864 Год назад

Thanks looking to do my T870 myself. This looks way easier than fighting both cylinders out at the same time to send off to a shop

@1234554321ep67890 2 года назад

Always amazed at how organized and neat your work is. You go the extra length to keep your workspace clean and don't rush things. Very impressive!

@TYLM895 2 года назад

Great videos thanks bud your good at what you do

@user-ii3mb5rh5r 7 месяцев назад

I appreciate this video so much ❤️

@con2firm4it8 Год назад

Thank You, great video, well done!

@ricardogutierrez1840 Год назад

Great advice boss thanks Soo much!

@concernedcitizen3651 2 года назад

Thanks for sharing your knowledge.

@tonydomicello8591 2 месяца назад

Thank you! Very helpful.

@user-bd4ht1xr4b 10 месяцев назад

Very good video own a T 750 & do a lot of my own work very helpful thanks.

@tetradgroup 10 месяцев назад

Thanks for watching!

@6967phillip 11 месяцев назад

Great DIY video... Very detailed ... good explanations

@tetradgroup 10 месяцев назад

Thanks a lot 😊

@johnbowman9150 Год назад

Wow this saved me 💰💰💰💰thanks…. I really appreciate it 😎

@clifbrewster8822 Год назад

If I'm seeing how you have mounted your vice that's a good idea and I'm really enjoying your vids will help me out definitely when I start to repair things on my s250 4000 hours but haven't had any yet I'm sure they are coming

@jimmac2784 8 дней назад

Brilliant thank you Now I’m going to try and repair mine 😮

@GoneUraling Год назад

THANKS for this video. I know what to do now!

@kylejones2075 Год назад

Nice you made it look easy

@flyinghi777 2 месяца назад

Great job thanks for the video

@robertlinsley7259 Год назад

Thanks for the great video! You have a great way of explaining the process and you make it look easy. Although I couldn't help noticing that you set the piston on the dirty track right before re-installing it into the cylinder....just an observation.