Bobs' 223 Bulk Bullets - OUTSTANDING accuracy! 8 cents each! 

Use coupon code JRBfreeship for free shipping on 250, 500, and 1,000 packs.

Me in 2021 watching him play with all those primers 🤤🌊

I really miss these long videos... I just order 5k of these a little while back because I remembered these videos and I'm about to start messing with them and was looking for a little info. It's crazy how often I come back to your older videos looking for info before I dive off into something new. You rock brother I really appreciate all you've done!!!

Rewatching for the thousandth time. Always a great series. Thanks JRB

You can never forget the first time you resize a .223 without case lube...

Great video. You are filling the niche that I have noticed existed for quite some time. The end portion where you document the groups with the load is outstanding work. Thank you for this, looking for more to come!

I think I just had another birthday watching this video. I know for a fact I missed two meals and my Newfoundland puppy died of old age. He was like 106 in dog years by the time this was over. When I started this video I was still married to my ex wife and not yet married to my current wife. I think I met my third wife about halfway through. Took my youngest Son to his first day of HS just before this video started .... he now graduates from college in three months and we're still talking about Bob's bullets.

Just found your channel recently and I think this is one of the best .223 loading videos I've ever seen. You are very informative and I like the relaxed vibe.

Love the old school long form vids.

Your 2,720fps through 2,777fps ALL were the largest (2.0") spreads! That obviously is harmonics in the barrel reacting to that velocity range. It looks like your barrel/bullet combo really has a sweet spot in the 2,950 through 3,000+ range!

Don't think I've ever watched a 70 minute video on RU-vid, until now, great job !

I love the long form videos as well, very thorough

Thanks for the review. I'm new to reloading .223 and your videos have saved me a lot of trial and error. Based on your testing I picked up a 1000 and H335 powder. At 25 grs they are the perfect plinking round.

I cant get over how well done these videos are. If you weren't a high school teacher at some point you should have been.

“Be a douche bag all day and have the ammo to back it up.” Le sigh, new life goals FTW. 😂

Your hour long videos are always the best. Great to listen to while mass depriming and swagging.

I love the long videos man it kinda shows the human element,duality of the reloader, the problems we all face and different ways to reload in the different methods . Just watching this one video I realize are a couple things I can do a little bit better streamline my process, I use H 335 to reload 7.62 x 39 and some of the techniques this guy uses I'm gonna start using . For example, I just got a new lee powder drop that does not have a removable lid and I was dumping the powder used to pre-charge back into the 1 pound powder jug. Just the simple fact of putting that powder into the trickler blew my mind LOL.

Johnny, Thanks for the review. anyone firing National Match should consider picking these up for the 200-yard line or even the 300. I purchased one thousand of them myself. I plan on using IMR-4895 just to see how they will group (IMR-4895 being similar to Varget) in burn rate. even firing the short course @100 yards these bullets would be a winner. Thanks again. Dave.

Please consider supporting the channel at www.patreon.com/reloading It's day 2 of ad-free August here on JRB. New videos every day at 8 am eastern. Today's video was late due to a screw up on my part that required a re-upload. Hopefully it won't happen again. Tomorrow's video is already uploaded and proof-watched...so I promise it will be on time! Thanks for watching!

Holy cow congrats man on youre way to 13k subs, ive been w you since the pre 1k days. Keep up the good work and info, thanks you

Thank you so much for this type of content. I've been making my way through your videos and this right here has made my mind up that I really need to get my butt in gear and start reloading! Great video!

Love nerding out on this with you. Thank you.

Hello and greetings from AZ new to reloading here and I have learned quite a bit from your vids thank you.

Point blank (no pun intended), VARGET is the "bee's knees" of powders! I believe that it is literally out of this world. Works very well as an all-in-one!Thanks for the in-depth video.I need to check those out!

I use 24gr of H335 with Berry’s 55gr my plinking loads and they’ve been great! I’m not sure about the accuracy but it’s great for improving technique and just hitting some steel!

I really appreciate the video. I purchased 1000 bobs bullets a few months back. They seemed to shoot well, but I've ended up spending a lot on hornaday. I think I need to go back and take a second look at Bob's. Thanks for sharing. Love your Channel.

I dont even reload. but looking at Bob's bullet video series. I felt like ordering 5000 bulk pack . ha ha ha ha. I'm here in lexington KY . i would one of these day go to the Sportamn's warehouse reloading class. Good job Johnny . hope my small amount of patreoning help

Great video! I still have a couple thousand bulk FMJ but these will be my next plinking bullet. Thanks!

Outstanding video, been waiting for an experiment like this and using the very popular powders for the average reloader. Great content Johnny! Maybe you can have these God bullets redeem that PSA barrel you shelved :)

I come back to watch these videos as a reloading refresher on Plinking Ammo. Bobs’ses is my go too. I’m going to try No Cannelure model next.

Great video thanks for all the little quick tips and also highlighting your mistakes. Great job

Great vid JRB, everyone loves an affordable plinking bullet that shoots well. With H335 I have always used 24.5-25.0 grains for just about any 55 grain bullet with no pressure issues and seems to be the sweet spot for me. Would love to see this bullet pushed a little harder with H335. This bullet looks like it was tightening up as you went up with Varget also. 8208 XBR probably would shoot this bullet well also. Thanks again JRB. I guess I'm headed over to Bobs' to pick up 1K to mess around with.

I finished some of my testing on Bob's , 20"gi AR 1/9. front and rear bags, mag feed, 5 round groups. Avg about 1" to 1-1/4". 55 fmj H-335 24.5 with O/L @ 2.250" Lake city brass. No crimp. for me, well worth the money.

I remember recommending them.

grab yourself a RCBS chargemaster best thing I ever bought. great channel

Ive had great results with S&B primers and they're always on sale for $20 per 1000

Time to update your plywood youtube sub board! You gotta love Bobses bullets!

underrated channel

Behind the line in CA here Thankyou for your videos yours and other loadtubers I’ve had success with my loads

Outstanding loading bracketing!

The intro to this video was ducking fantastic .

Awesome video, thank you so much for doing this

When you get Flyers you're probably getting variations in your primer weights. Weigh your primers and you'll find some of them are light and some of them are heavy and that variation is the amount of explosive in the primer, so just try to group the primer weights around the most common weight and use all of those for your testing and you'll see a higher level of accuracy.

Thanks. I watch a lot of your vids. I have loaded 1000’s of .223. Never used “Bobs’” bullets though. Good review! I used several different powders. H335, Varget, Tac, Winchester 748 to start with. Primers; CCI 400, CCI 450, 41’s, BR-4’s. CCI 400’s worked best in warm weather. CCI 450’s in cooler/cold weather. (They were more consistent than the 41’s) The H335 worked out to be my most consistent, accurate powder. I know it’s a crazy/weird thing but a velocity of around 3000-3050 fps is the velocity my rifle shoots best at.

Hey Bud I just Wanted to let you know outta all the videos i watched on youtube. Yours or others I've learnt the most outta this one, in a whole not just on one subject about reloading. Thanks.

Just got my Bob's bullets today. ordered day before yesterday. very quick At first glance, they look ok. load some tonight or tomorrow. thanks for the tip. gonna use 26.4gr of varget. a FULL case for 223. I searched high and low , best price around for boolits.

I needed this video. Thanks for the info

For extruded powders that lock up the hopper (Hornady in my case) I've learned to brace my levering hand on it in such a way that I can give my operating thumb an anchor. This allows me to break through with a deliberate movement and get the regular charge even on the hard ones. If I try to cycle a few times to loosen, it just adds more and y hopper tends to stay within a tenth pretty well, so it just makes it easier this way.

I've never laughed harder in my life when you said, "oh no". 😂😂😂😂

I strongly agree that Hodgdon putting reload data on the bottle is pure marketing genius. I often manage to get out of the house without loading data and the Hodgdon label is a life saver.

Johnny, i wish i would have caught your 243 comment the first 3 times ive seen this vid, i would have sent you my rifle. I'm stationed in Germany and it just sits there needing love. Its a little $300 walmart hohum rifle but my favorite of all, Rem 700 ADL 243win, with handloads i got it at a consistent 3/4moa at 100yd, stretched it out to 600ys consistently, im certain you would have enjoyed it. Keep up the great reloading work!!! This is my fix while im away bud.

You had me laughing at the beginning and when you were talking about being "that guy" hahaha so much good content, august is going to be a good month, I will follow along great job man

I went RCBS bench priming with the vibrating primer tube loader that does both large and small primers. Priming is such a pleasure now, And minimal time wasted screwing around trying to get primers in the cases.

For the RCBS shell holder hand primer if U hold the shell up off the base of shell holder it will self align and slide in nicely (post Dillon Swager). If it hits, slide it down towards the center a little. Its taken hundreds and hundreds of attempts to figure this out and get it running smoothly.

Fantastic video thank you so much. Thoroughly impressed. Got a new subscriber!

Nice video, very comprehensive. 😎👍

Lookin good, nice way to check length, closer you can get to the lands is a good thing for accuracy

standard primers with 26.5 gr. of H335 with an OACL of 2.750". When I chronographed this load alongside Federal XM193 ammo, the federal was 3,138 fps avg. and my new load with these G.D. bullets clocked 3,158 fps .

Man what help this guy is…wondered where the little lube turds come from n my die ring and now I know..love it brother..keep it up

I got these bullets for $119/1000 delivered few months ago. These powders hard to find now days. I picked up RE 7 and @21.6 gr can shoot 1" group at 100Y. Brass 1.750" and OAL 2.245". Mil spec AR15/M4 with 16" 1-7 twist, Vortex strike eagle II and TriggerTech adjustable trigger(love it) Of course all barrels are different but a good place to start if can't find Varget, H335 ... etc. Nice video, THX.

Hornady one shot isn't supposed to contaminate powder either. However I dry tumbled a batch after they are loaded just to make them shiny. They look nice, but now I have a 10-20% failure to fire rate. On the case it's fine, but apparently the power can pick it up and screw you. Luckily I only have to take apart a small batch.... Of 500..... Side note- I am really enjoying my new Hornady cam lock bullet puller. Lol

Johnny rb your videos are awesome I just ran into them and love em

thanks for making this video

I'm planning on trying the NOE HTC225-60-RN bullet that was designed for powder coating. With any luck it will be an accurate plinker that costs even less than Bobs' jacketed bullets.

You are totally incredible! 👍 I truly think you should teach a class at YALE University about reloading. You are certainly the top professor of general cartridges 🙌

49:00 in, use a rubberband or hairtie and a laundry fabric softener sheet. the dryer sheet will prevent static from making the powder stick to the powder funnel. i just keep it on my powder throw and take a peek as needed. happy reloading!

I like H-335 for my 223 with the 55 grain Hornady V- max bullet

Enjoying this video (perhaps for a second time) in 2024. I have that same scale and love it. May have learned about it from this channel or another RU-vid channel

This is cool, I've had small adjustments with bullet seating make a large difference. Try doing a fine seating test from there for your barrel. Thanks for the great videos

There great bullets. Just loaded 1k for plinking. I had good results at 2.200 with my colt 6920 25.gr cfe.

bob hello,...............this is the other Bob's bullets. im glad your doing well. my specialty is handloading very high quality shotgun shells for a limited clientele who don't care what a box costs. im just realy realy glad there's another Bob out there doing the same stick. i look forward to buying .223 from you for my farm bolt gun. still have a case of black hills but ill get to you soon. vty Bob W, husband of N

I would love to see one of your test with and without your CAN. If I remember correctly the last time you tried it. Your groups opened up with your CAN on. And Like always love your videos. I'll be seeing you on PATREON. from now on.

have you seen this? the H335 is the same as as mil spec Olin WC844 use by the M193 ball, M196 tracer, M855 ball, and the M859 tracer. Plus others. IDENTIFICATION OF SURPLUS HODGDON VS. MILITARY POWDERS Hodgdon Powder Olin Powder HS-6 540 HS-7 571 H110 296 (before '75 WC820 .30 Carb) BLC-2 WC846 (Ball M80 7.62mm) H335 WC844 (Ball M193 5.56mm) H380 WC852 (Ball M2 Cal. .30) H414 W-W 760 sold to Hodgdon H450 785 (originally WC780) H870 WC870 (20mm) HP38 W-W 231 sold to Hodgdon Trap 100 452AA sold to Hodgdon hence, if your using a 5.56mm you don't have to rely on .223 data from Hodgdon when it comes to 55 grain or 62 grain bullets. Not one of their published loads will match or compare with the 5.56 load. but, you should not use 5.56 loads in a .223. the 5.56 is obviously a hotter load that most .223 can't handle safely. The .223 Wilde was built to handle both,. the .223 is not.

Lot of good info here, thanks.

The H335 max load is 25.0 grains on the Nosler website and 25.3 depending on bullet type.

Johnny's Reloading Bench, if you want more velocity with H335 your going to need more pressure, to get more pressure your going to have to lower your OAL or add more powder. Hodgdon these powders importer/distributor show OAL with a Speer 55 Grainer @ 2.200.

You really like the varget in 223 I've noticed. And never doubt anyone or anything until you try then for yourself

"Continue the Fellatio" I fell out of my chair when I heard that.

I’d like to see these at around 3100 to 3200 FPS. It seems as the velocity increased your groups got a lot tighter. I’ve been getting my 55g .223 from surplus ammo. I’ll defiantly give the Bobs’ a try. Thank for the show. Great content!

Im doing .308 rounds in 150 grain for 33 cents au each in 7.62mm-,sure beats paying $27.00 for 20 rounds of factory federal ammo in the same configuration.

Man I love your videos so hard.. Oooh oooh oooh PS, I load H335 to 24.5 with 55grain varmint nightmare SP bullets @ 2.228 oal. Those get me really great groups at 70yards. 16inch stoner barrel, 1:9 twist.

Have you done any testing on whether wet tumbling after trimming takes care of the chamfer/deburr steps? And whether it'll affect your accuracy moving forward after seating/crimping? And looking forward to that crimp video you mentioned at the end, was wondering about how much of these finicky steps really matter with the end result in accuracy.

You made very good video! Just wondering what program are you using? Many thanks for sharing with us!

Lee dies also has that hole to let air and lube out. Also seemed to take you a while to trim, you may want to look at the RCBS carbide cutter. It fits the frankford arsenal and cuts really fast and clean.

BOB's raised their prices with the Rona outbreak. I have been ordering them in 1k lots for $80 in the last few months, this time the price jumped to $115. I say that is a price jump high enough to call it price gouging. I am a little upset with Bob now.

It was on live stream.

Thanks for the video, Varget is the best.

i would suggest, to not change the gas block setting during strings of groups, it might not change groups much , but it is a change in the amount of gas that follows the projectile out of the barrel. consistency is paramount in comparison. keep up the good work buddy really enjoy your channel

How do you dry your brass? Really like your channel!!

You might switch to dry tumbling after your final trim/chamfer/debur. That will make it easier to remove lube and also gives you the option to put some final polish on the brass.

Outstanding video on case prep and loading .223. Hope you don't mind my adding some rambling thoughts. Ergonmomics - That plastic bin is great for lubing but too deep to have to reach over to retrieve cases - very tiring in the long term. Shallow plastic food trays work great at the bench. I like to have the sized case receptacle at or slightly below bench top level so it's easy to drop the cases into the container. I once prepped about 5,000 surplus military 5.56 cases so I had to do everything I could to improve efficiency. Dry tumbling with fine ground corncob + NuFinish and mineral spirits works well to remove the lanolin No waiting for the cases to dry and the mineral spirits helps reduce dust. The 55 grain FMJs I've loaded have had inconsistent tip shapes, making the OAL measurement vary even though the bullets were seated the same off of the ogive. A comparator is the only reliable way to measure OAL. If you're trying to fit a magazine then both actual and comparator OAL should be measured to assure that the bullets will both fit in the magazine and will be seated the same within the cartridge. The distance to the lands will be consistent even if the OAL to the tips is inconsistent. It seems to be less of an issue with hunting and target bullets but I still see small variations in tip length compared to the ogive length. Your FMJs are more consistent than what I've used. With the Lee Factory Crimp Die you'll know how hard you crimped when you have to pull a bunch of bullets. Don't ask. :( The shooting test was well done as a video and very interesting. None of the groups were that bad considering you were shooting FMJs but the fliers were interesting. Could the Varget at 2.260 test not be valid because the rifle wasn't autoloading? It seems to me that loading from an open bolt and tripping the bolt release every time is the most consistent (eliminates variations form the first round to subsequent rounds), followed by autoloading and then manually cycling the bolt being the least consistent. The Varget at 2.260" is what I would expect a rifle with good components like yours to shoot. One of the major bullet manufacturers said that FMJs are the least consistent of all the bullets they make because they're made backwards to all other bullets. With everything else the cup is drawn, the core pressed in, the bullet is formed and lastly the tip is trimmed. WIth FMJs the tip is formed, the core pressed in and the jacket is trimmed before being formed around the base. That process can lead to out-of-balance bullets according to the maker. My best shooting AR shoots "patterns" at 100 yards with the FMJs I've tried but with quality bullets like Sierra MKs and Hornady V-Max it will shoot in the threes at tht distance.

55s shoot well up around 3000Fps so push your other powders up a little the Varget which is our Ar2208 here in Australia if you go 2/10ths up or down may find it also tightens group

The shot at 58:16, good lord. Same hole. I literally went frame by frame to see the difference.

I resize and de-cap all in one stroke, then trim, then polish.

The Lee Auto Bench Prime is pretty damn awesome, much easier on your hands. I think you will like it very well.

Just ordered a thousand based on your awesome video.

just had and idea for a short cut to arriving at a casing . using a hot die , "proper dimensions " and a heat source from nichrome wire/ tape . thinking a lot less waist in bullet rated brass can't wait to give it a go

Gunblue 690 turned me on to Lee size lube that comes in a tube like tooth paste . I've tried all the lubes over the past 60 years . I've dented a lot of shoulders and stuck a lot of cases . Since using the lube from Lee I haven't stuck a case or dented a shoulder . It's easy to use and cheap . See Gunblue 690's video on it .

Love your videos, best reloading videos on RU-vid. Have you done a video on these bullets loaded for 5.56? I'm wanting to try some in 5.56 and Ramshot seems to be the only powder company that lists data for the 5.56. Maybe you've already made the video and I haven't found it yet on your channel?

J-ames bullets has coated lead 9mm cheaper than their lubbed version. Not trying to stir anything up. I ordered 1k earlier this week to test out.