Bosch Cordless Brushless Drill Restoration/Gearbox Rebuild/GSB 18V-EC 

Thank you for the good tip for placing the locking ring back at 11:40. i have a cheap chinese drill with almost the same gearbox. The instruction to put in gear 1 was very helpfull

Very nice renovation. This high quality drill will continue to operate at its peak for a long time to come. Respect from the USA.

Thank you for the video. This helped me figure out how to put my makita back together since the gear assembly was similar.

Very helpful video with great detail! I was able to successfully rebuild my drill using this video as guidance, thanks!

Ich mag die blauen Sachen. Diese sind sehr Reparatur freundlich konstruiert.

Bravo Respects pour votre travail From Rabat, 🇲🇦 Morocco Peace out

excelente explicito Barcelona Venezuela ,francisco sabino,gracias señor.

Beautiful work.

Второй инструмент посмотрел, отличается от другого. Работы больше. Отлично! Понравилось! 👍

Eizelfutter kann man also nicht wechseln :) Bravo Bosch immer beser aber nich für kunde. super film danke.

Thanks! It really helped me! But I did it on a Bosch Flexiclick 18v

Nicely Done 👍😁👍😎👍😁👍

Nice way u have done

Hope to have more videos of Bosh battery drill

Excellent DEMO CLEANING ✅✅✅💙💙💙

Excellemt and no talking shit umlike others. Thank you!

nice refresh. spindle lock on mine never worked ok, always sliping when tigtening chuck.

Well done sir

Gostei muito top 👏 parabéns

Excelente video, que tipo de grasa utiliza para lubricar los engranajes?

I own one of these & mine also seems a bit tired but i don"t think i"d have the confidence to strip down & re-assemble myself

Great Job!

exelente trabajo

👏👏👏👏👏👏👏

Era que le des una pintadita al broquero

Thank you

exceptional work and professionalism on the job great to watch. I was wondering one thing only - when you used the electrical contact cleaner on the stator/field wouldn't that disrupt or remove the enamel protection of the winding? if that happens it would be quite dangerous and could easily short anytime, Also one suggestion: if you had disengaged the keyless chuck from the impact drill before opening itself, you could also clean the primary shank shaft and the torque selector from inside - will appreciate any comments you ave on both. Great work!!!

I don't think you are supposed to oil the outer face of a sealed roller bearing nor the inner one for that matter... This part is not supposed to spin. If you want to oil the bearing - try injecting grease inside the bearing or just replace it.

Muito bom.

What grease do you use ? And what is the difference between yellow one and blue one. Great job btw.

Excelente

Hey nice vid, I have broken three keyless chucks on these drill in the last 4 months. They get jammed fully open so easily, that's happened twice. Now I have a chuck that won't tighten after stripping and putting back together. Annoys me as it's not a cheap drill!

Perfect.

Saya pikir bor cordlessnya masih bagus dan tidak bermasalah, bekankah demikian?

Sensacional!

Hi! I’m disassembling my Bosch chuck and I’m stuck in the part that you seem to press side buttons and remove a cap with bearings. It just comes out that easily or do I need to do something first? I appreciate your help!

😲 wow

Is it better a brushless type compared with a carbon brush type

do anyone know if at 7:14 there are a bearing inside or just a basic bushing. I see on another clip on a 10.8 volts having a bushing there, but on this more powerful dril have a bearing maybe?

Top gemacht man. Aber eins hast du nicht gemacht. Du hättest die Bolzen von den Zahnrädern auch fetten können und dann die Ritzel drauf mache. Solle . Aber egal top gemacht.. komme sicher auf mich auch noch zu...

Hi what mid torque impact wrench would you recommed.? Ryobi or anything nearly 200 bucks

Thought it was AvE but watched anyway

Which torx bit size did you use to remove the screws from the casing?

Hello and thank you for this video! I have a Bosch PSB 530 RE, and it's stuck on hammer mode. I can move the switch, but it does nothing. Do you have any idea of how to fix this ? Thanks

Hi there its perfect job you done , i have a questions plz reply me if u can i have got same drill , but gone wet bottom part 3 inch water all night from bottom, I cleaned all bottom part from inside with petrol , but still not working with other battery, thanks

Great video, Alex! I have a Makita 6391D corldess 18V drill that I love. I'm cleaning it up and would greatly appreciate a suggestion for what type of cleaning solvent and lubricant is best suited for the gearbox/chuck. Cheers!

ti posso mandare il mio avvitatore?

Is it new hou much time you use

Do you know how to change the chuck to another one? :)

Hallo Alex I’m new to your channel and I’m not suggesting your an amateur with regulars to tool renovation but I certainly am and repair my own tools when required but could you tell me the name of the blue lubricant you use on the mechanicals please . I would also like to thank you for the effort you make to produce the films thanks.

What type of lubricant did you use on the gearbox? That blue stuff didn't look like lithium grease. Also I've heard that too much grease in a drill can cause problems, by getting into the motor windings or something.. I'm not sure if that's too much.

What kind of grease do you use ??

Lo único que no me gusto fue no revisar el estado de los rodamientos.

thanks for the video but there is no repairment held, hence it might be a reassembling. Not rebuilding. Disassemble, clean, grease and assemble. That's all.

👍

Hallo I’ve just made the comments above can you also tell me how to spell regards too.

Found your toutube from Company Of Heroes lmao. Toxic.

👏👏👏🤝🤝🤝👍👍👍

Че за немое кино))

Like dissaembly

wear some gloves bro

Такими руками только говно месить