Boss GT-1 Tuner Tutorial | 4 MUST KNOW Assign & Setup Tips

Подписаться 10 тыс.

Просмотров 6 тыс.

50% 1

🔥🎸 4 MUST KNOW Boss GT-1 Tuner Assign & Setup Tips 🎸🔥
In this video about the Boss GT-1 Multi Effects Processor from ‪@BOSSinfoglobal‬ & ‪@rolandglobal‬, I'll show 4 MUST KNOW Boss GT-1 Tuner Assign & Setup Tips. I'll explain how the Assigns are set up, and what they can do, in regards to using the Boss GT-1's onboard Tuner.
These 4 MUST KNOW Boss GT-1 Tuner Assign & Setup Tips will surely make activating the onboard Tuner A LOT easier.
⏲ Timestamps ⏲
0:00 - Intro
0:22 - Activating the Tuner with the CTL1
1:19 - Activating the Tuner with the FS-7
2:41 - Activating the Tuner with the EXP1 SW
3:47 - Activating the Tuner with the EXP1
5:40 - Final Tuner Assign Thoughts
If you're interested in learning more about the Boss GT-1 and its Assigns, then have a look at this 3 part Assign video series:
Watch Part 1 here:
Boss GT-1 Assign Tutorial | What are Assigns? | Walkthrough in Boss Tone Studio
⭐ - • Boss GT-1 Assign Tutor...
Watch Part 2 here:
Boss GT-1 Assign Tutorial | Using Assigns on the Boss GT- 1 Itself
⭐ - • Boss GT-1 Assign Tutor...
Watch Part 3 here:
⭐ - • Boss GT-1 Assign Tutor...
Make sure to 👍 SUBSCRIBE 👍 to my Channel, and hit the 🔔 bell 🔔, to keep up to date with my newest uploads.
Requests on specific Boss GT-1, and Boss GT-100, tutorials are very welcome - just leave a comment down below.
DON'T MISS THESE other Boss GT-1 videos:
Boss GT-1 Direct USB Recording Tutorial in Cubase
⭐ - • Boss GT-1 Direct USB R...
Boss GT-1 Clean to Distortion Tutorial using Boss Tone Studio
⭐ - • Boss GT-1 Clean to Dis...
Boss GT-1 Wah & Expression Pedal Calibration & Setup
⭐ - • Boss GT-1 Wah & Expres...
Boss GT-1 Wah Pedal Playing Teaser
⭐ - • Boss GT-1 Wah Pedal Pl...
Boss GT-1 Write Menu Details and Explanation Tutorial + Patch Display Trick.
1️⃣ - • Boss GT-1 Write Menu D...
Boss GT-1 Signal Chain and Order of Effects Blocks
2️⃣ - • Boss GT-1 Signal Chain...
Boss GT-1 Signal Chain and Assigns + Footswitches Tutorial
3️⃣ - • Boss GT-1 Signal Chain...
How To Go From Clean To Distortion.
4️⃣ - • Boss GT-1 - How To Go ...
Creating A Patch From Scratch.
5️⃣ - • Boss GT-1 Tutorial - C...
Boss Tone Studio Tutorial.
6️⃣ - • Boss GT-1 Tone Studio ...
DON'T MISS OUT on these Guitar Repair and Tech videos:
Crimson Guitars Luthier Tools Unboxing.
1️⃣ - • Crimson Guitars Luthie...
Guitar Pedalboard Build & Setup.
2️⃣ - • Guitar Pedalboard Setu...
Sterling by Music Man│S.U.B. Series Ray4 Bass Setup│Part 1 - Truss Rod Adjustment.
3️⃣ - • Sterling by Music Man│...
DON'T MISS OUT on these playlists:
Boss GT-1 Tutorials.
1️⃣ - • Boss GT-1 Tutorial Videos
Boss GT-100 Tutorials.
2️⃣ - • Boss GT-100 Tutorial V...
🎸 1974 Greco Les Paul Custom EG-480 | Made in Japan | Refret | Part 1️⃣ 🎸
3️⃣ - • 1974 Greco Les Paul Cu...
🎸 1970s Greco Les Paul Professional PE-520 / PE-600 Restoration 🎸
4️⃣ - • 1970s Greco Les Paul P...
🔨 Guitar Fret Work 🔨
5️⃣ - • Guitar Fret Work
🔧 Epiphone SG G-400 Guitar Setup 🔧
6️⃣ - • Epiphone SG G-400 Guit...
Thanks for watching and for the great support, it's truly valuable to me!
Comments/questions are very welcome, so make sure to leave one in the section below.
See you in the next one 📹📸
#BossGT1 #BossGT1Tutorial #GuitarNTabs

Видеоклипы

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@simoninwards7252 Год назад

I’ve been slack in learning how to use the GT-1 properly, your channel and videos have been excellent, you present the information very clearly, appreciate it!

@GuitarNTabs Год назад

That's fantastic to hear, Simon, thank you! Please do let me know, if you need anything else. Thanks for watching. Best regards.

@sentoul Год назад

Option 4 is a blast! It would have never occurred to me. Thanks!

@garthosborn8400 10 месяцев назад

I’m considering a multi effects unit. I love the small footprint of the GT1, but am also considering the ME90. A couple things keep me interested in the GT-1. First is the price. Doable! Second is the great tutorials on your channel and a couple other channels. The amount of flexibility and control possible with the GT-1 is really amazing by using a couple extra control pedals. Thank you for such great information!

@GuitarNTabs 10 месяцев назад

Hi there, I'm glad you found my videos helpful, thank you. I agree, the GT-1 is still a valid contender. I haven't tried the ME-90, but obviously it's packed with the newer AIRD preamps and new FX, but again, the GT-1 is so flexible especially when you add some extra footswitches. I'm happy to assist. Please let me know if you need anything else. Best regards.

@AntonioCavicchioni Год назад

Very informative! Thanks!

@GuitarNTabs Год назад

Thank you, Antonio! I'm glad you think so. It sure is an easier way to activate the tuner, than having to press both UP and DOWN at the same time. Thanks for watching. Have a great saturday. Cheers.

@alfredguidolin6432 Год назад

Thanks for another great and helpful tip!

@GuitarNTabs Год назад

Thank you, Alfred, both for watching and for your comment, I greatly appreciate it! So many things to know and learn in regards to the GT-1! Excellent piece of gear. Let me know if you need anything else. Best regards.

@heyjarrod Год назад

Awesome! Thanks! I really like that last option of assigning the tuner to expression pedal. 🤘🏻🎸🔥

@GuitarNTabs Год назад

Exactly, that's the one I like the best too! Cheers.

@neilb1906 Год назад

@@GuitarNTabs hi, ive done this assign, but each time i change to a different patch, I lose the assign. How can I make the assign global, so the SW1 always activates the tuner when heel pressed? Thanks

@GuitarNTabs Год назад

@@neilb1906 - Hi there! Thanks for your comment and question. You need to change the EXP SW from PATCH to SYSTEM, in the PREF menu. Then you need to specify, in the EXP SW menu, found in the signal chain, what you want it to do. Then remember to save your edit, by pressing the Enter and Exit buttons, so you enter the WRITE menu. That should do it. I hope this helps. Best regards.

@tonyboyer7923 Год назад

That's great to actually have those types of options . I got to get the 6 , 7 external pedals . I would have much rather had bought them as a package from day one could have been getting full use of the overall pedal

@GuitarNTabs Год назад

Hi Tony! Thanks for your comment, I greatly appreciate it. Indeed it is - I personally really like the last option, where the EXP1 will activate the tuner, when at heel-position. If you want my opinion, then go for the FS-7 - it doesn't require a 9V battery. The FS-7 can be powered via a power supply, for the operation of the LEDs, but also passive. Agreed, you get more out of these MFX pedals, when having the external footswitches for assigns, etc. Have a great day. Cheers.

@vmp0001 Год назад

what about to tune in drop D? how is the procedure

@derekhandley3270 5 месяцев назад

Hiya , out of courtesy I thought I would let you know I don’t think the system setting works with exp1 . I have changed it from patch to system and it doesn’t operate the tuner . I turned it back to patch it works on that patch as per your video . I tried it through the computer via system and preferences . Still the same result . I’m learning all the while though . lol 😂

@GuitarNTabs 5 месяцев назад

Hi again. That's correct, I also explained that in your previous comment, it only works globally for the CTL1, CTL2, CTL3, UP, DOWN and EXP SW. I tried it all out yesterday, before providing you with an answer. Haha, that's good! It's always nice to learn something new ;-) Let me know if you need anything else. Cheers.

@moisestsuzuki Год назад

Hey man, I hope you’re doing well. I’m thinking of buying a Headrush FRFR-108 cabinet and connecting the Boss GT-1 to it. How would I connect the GT-1 to it, and what cables do I need?

@GuitarNTabs Год назад

Hi there, Moises! Thanks for your comment, I appreciate it. I'm all good, thanks, I hope the same for you. That sounds interesting, I'm sure you'll like the combination. I would recommend you to have a look at the User Manual for the FRFR-108, when you get the unit, but let me tell you what I know. You would connect the GT-1 to the 108 by taking the GT-1's left output, and connecting it to one of the Inputs on the 108. The Manual says to use a TRS-cable, which is a stereo jack cable, but since the connection is mono, and the GT-1's output sockets are unbalanced, then it doesn't make sense. So I would simply take a regular instrument cable and connect it from the GT-1 to the 108. Set the Output Select to Line/Phones and enable the GT-1's preamp models. There's a contour switch on the 108, and it's covered in the Manual too, but I would probably set it so the switch is all the way out, or showing most of its length, if that makes sense. I hope this helps, but please do let me know if you need anything else.

@moisestsuzuki Год назад

@@GuitarNTabs Thanks so much. That makes a lot of sense. So I would essentially only need an instrument cable that goes from the left output to one of the inputs, right?

@GuitarNTabs Год назад

@@moisestsuzuki - Hi again! I'm happy to hear that. Exactly, that's the way. Please let me know if you need anything else. Best regards.

@jaredmacabale7285 Год назад

Do you think this still needs external ir loaders to elevate the sound? Or anything? I was planning to buy Nux mini studio or tc impulse

@GuitarNTabs Год назад

Hi Jared. Thanks for your comment and question. Not at all, to be honest. I've been using the GT-1 since it very first came out, and I've always used the onboard Speaker Types, and they're really good. Find a preamp type you like, and try to mess around with the speaker type, it has a strong impact on the sound and character of the preamp type. Well, you could buy and external IR pedal, but then again, since the GT-1 doesn't have an onboard effects loop, the placement for the IR pedal would really not be ideal... You'd probably have to place it right after the GT-1. I hope this helps. Let me know if you need anything else. Best regards.

@derekhandley3270 5 месяцев назад

Hi, I assume when you set the exp1 to activate the tuner or in fact any of the ways you show , these will only work when your on that numbered patch . Is there a way to globally set the tuner to exp1 ( replacing the double hit up and down ) globally or do you have to copy the patch across all patches . So how do you copy just one change across all patches but not end up disturbing previous settings on other patches . Hope this makes sense ?

@GuitarNTabs 5 месяцев назад

Hi there, Thanks for your comment and question, I greatly appreciate it. For the CTL1, FS-7 and EXP SW setups, you can set them up globally, so that it appears like this on all patches, if you wish so. You simply need to change a setting in the PREF menu, found by pressing the MENU button. When you enter the PREF menu, then find the desired footswitch you want the tuner to be on, and change the parameter from PATCH to SYSTEM. Make sure to save the adjustment, before doing anything else. Now it should work across the patches. I hope this helps. Cheers.

@derekhandley3270 5 месяцев назад

@@GuitarNTabs That’s brilliant thankyou so much . I’m onto it 👍🎸🎼

@karimabobadr3175 9 месяцев назад

Hi, can GT1 be programmed to transbos 0/-1/-2 or +1/+2?

@GuitarNTabs 9 месяцев назад

There's a Pitch Shifter in the GT-1, yes, and it can be done, but honestly it isn't all that good... The tracking is a bit weak.

@brandontrotter9513 Год назад

Hello! Big thanks for all your videos and tips. I use the GT-1 for some clean + modulation / fuzz tones...would you mind if I contacted you via email to pick your brain about some tips?

@GuitarNTabs Год назад

Hi there, Brandon. Thanks for your comment and question, I greatly appreciate it. No problem at all, you can find my contact information on my RU-vid Channel page, under the "about" tap. Looking forward to your message. Thanks for watching. Have a great day.

@brandontrotter9513 Год назад

@@GuitarNTabs Thanks so much! Your email address isn't listed in the about tab on your page

@GuitarNTabs Год назад

@@brandontrotter9513 - It is, and you probably can't see it, beacuse you're doing it on your phone, etc. On PC it will surely be there - check that out. Cheers.

@user-oi4fi2zx8i 9 месяцев назад

im so confused with my gt1 all the sounds on the gt1 are all different volumes one moment playing a tone then switch it and its deafening loud then press a different tone and too quite, im using it through my boss kanatan mk2 through the right channel too

@GuitarNTabs 9 месяцев назад

Hi, Thank you for your comment and question, I greatly appreciate it. This is generally the case with almost all patches, especially if you don't create them yourself. The Factory Presets on the GT-1 will be all over the place, they're only really there to showcase what the unit can do, etc. It's absolutely best to always create your own patches, that way you can easily control the amount of gain used, as well as keeping an eye on the level(s). I'm not sure what you mean by "through the right channel too"? The right channel of what, exactly? Let me know, and I'm able to assist further. Cheers.