Bostitch Nailer Repair - How to Replace the Rebuild Kit

Подписаться 71 тыс.

Просмотров 131 тыс.

50% 1

Need help replacing the Rebuild Kit (Part # RBK8) in your Bostitch Nailer? Watch this how-to video with simple, step-by-step instructions for a successful DIY repair.
Don’t already have this part? You can pick up an authentic OEM part sourced directly from the original manufacturer here:
www.fix.com/parts/nailer/bost...
Fix Part Number: FIX10250593
OEM Part Number: RBK8
Why you might need to replace the Rebuild Kit:
1. Nailer Not Performing Correctly
The information in this video is specific to Bostitch Nailers. To find a Rebuild Kit specific to your model Nailer, or to use our helpful model number locator, visit www.fix.com
Not what you’re looking for? For more Nailer repair help click here: www.fix.com/parts/power-tool/...
For more helpful Nailer Repair videos, you can browse through the Power Tool Repair playlist on our RU-vid channel: • Maytag Washer Repair -...
Fix.com is committed to providing you with high-quality parts, quickly and easily. Find out more about our fast shipping and interactive customer service on our website.
www.fix.com/
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.com/+fixdotcom
/ fix.com
If you found this video helpful, give us a thumbs-up, and subscribe to this channel for more useful repair videos! Don’t forget to leave us a question or comment below, and our customer service representatives will be happy to help!

Хобби

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@user-lh3cj1kn7b 6 дней назад

This gives me confidence to tear apart this expensive gun. Thanks. My gun does not leak, but drives a nail and then locks as soon as I hook up the air without touching the trigger. Lot of parts in there and just going through the rebuild procedure might identify the real problem. Right now the gun is not usable at all.

@darronhowell9057 Год назад

Thank a lot for the video. I had take mine apart a few days before my rebuild kit came and I got my parts mixed up. Could not figure out what I had wrong the gun wouldn’t do anything. With this video I figured out what I had wrong saved me a trip to the shop.

@hammerhardesty7955 9 месяцев назад

More of the same ,Excellent Tutorial! Just enough without lag times. Covered the subject perfectly. Thanks 👍🏽👍🏽

@davidhook487 4 года назад

Excellent tutorial! Thank you so much! You are a blessing!

@mikelewis4682 4 года назад

GREAT TUTORIAL. VERY SIMPLE APPROACH. GOOD PACE OF DEMONSTRATION.

@bobbailey7235 Год назад

You are so kind to show this to us. Thank you.

@pianobar7801 4 года назад

Great video. Bravo 👏

@johnnyblanco1834 3 года назад

This was amazing

@donaldvazquez 3 года назад

Great video. I might suggest using blue locktite instead of red because blue can be removed with force but red takes heat to break the bond.

@Scottchmorsco 2 года назад

the Locktite is blue, just the tube is red

@dongeske7802 9 месяцев назад

On last step. Washer "goes on third after magazine then safety cover.

@jxinx6812 5 лет назад

A rebuild is kinda short when you don't do anything for the wornout trigger valve assembly.

@michaelhughes1477 3 года назад

What type of lubricant do you use? Does it come with the rebuild kit?

@Aepek 3 года назад

7:46 wondering about the cap. Looks like an o-ring around that cap. Is there🤔? Sorry, have one other question. Does anything need to be torqued at all, or just hand tighten? I know you didn’t torque anything down, but wondering if should, or just doesn’t matter at all. Thx for vid, liked that did step by step for everything got in the kit

@ferrelljohns720 5 лет назад

MY pawl feed retainer pin fell out of my n80 nailer . I found the pin but can't find a retainer for the top when it's installed. The n46 roofing nailer uses the same style setup. Not sure if it's the same size. Can you recommend a solution.

@Spunky-iq8jm 2 года назад

My Bostitch finishing nailer is leaking air at the trigger. It has hardly been used and has been sitting in the case. What should I do?

@buckfencing5072 4 года назад

I need item#13 for my Bostitch N64C because it broke, but can not find one anywhere. And there is not a rebuild kit so what o-rings and things would you recommend replacing? Same for my N57C I need some help locating parts too

@kylethurston1681 2 года назад

I watched this video because I had to replace a driver guide that I blew apart, assuming because I put it in backwards after a teardown. Does the round opening go up or down? The other side has a triangular opening.

@manoliskish 2 года назад

I have a Finish nailer N60FN and the problem is the piston never gets to rhe upper position

@walkgood4092 Год назад

Did you replace the o-ring on the greenish cap?

@patrickpeterman8736 6 месяцев назад

IF POSSIBLE CAN YOU PRODUCE A VIDEO ON A PORTER CABEL " MODEL RN175C TYPE 1" ROOFING NAILER I,M GOING CRAZY HERE !! THANK YOU !! , PJP

@carlosecastro6920 5 лет назад

Where can I but the rebuild kit for a bostitch nailer strap Model MCN150?

@carlosecastro6920 5 лет назад

Buy !!

@OhellYAEH 2 года назад

Will this rebuild kit work for a n12

@pankajkawade3549 2 года назад

Add more ,air leakage trublshoot

@marcinm6745 7 месяцев назад

Hello, I have a problem. The nailer is identical to the one in the photo, the hammer does not retract all the way and therefore loads two nails. Does anyone know why the hammer does not retract all the way?

@aaronfaber6259 2 года назад

I am looking for a rebuild kit for N65CP Bostitch Nailer and the cylinder seal, but can't find it. Do you have access to it?

@FixDotCom 2 года назад

Hi Aaron, I can't seem to find that model number on our website. I did find a parts list for this Nailer though: www.fix.com/models/nailer/bostitch/id783259/n63cp/