Bowl Gouge 

Very nice work. However what you have created is a spindle roughing gouge and should never be used for bowl turning. Also, it is strongly recommended to put a ferrule at the beginning of the handle preventing the wood splitting. A catch may cause the tool completely snapped. A bowl gouge flute should be smaller, preferably V shape with thicker material. Good luck

I have no idea what a "bowl gouge" is, but you certainly look like you know what you're doing. Nicely done!

Great smithing, although bowl gouges are milled from round stock: what you made is a spindle roughing gouge. A lot of people have snapped gouges forged from flat stock when trying to turn face grain, this can be very dangerous! The tang on yours looks pretty thick, but generally this should never be used on face grain turning!

Thanks for the video. I always look forward to yours. Nice turning tools, nice bowl! I also turn wood on my metal lathe, but suffer a guilty conscience. It always prompts me to give it a good vacuuming, cleaning with mineral spirits, and a wipe down with a rag & way oil.

Thank you for a motivating and mesmerizing video. Outstanding!

I always enjoy seeing your power hammer work, it is so clean. A wood lathe is on my list for my new shop, I'd like to get into that craft. Thanks for the video.

Nice, and, as usual, a great treat to see such an orderly and well planned shop. :)

Great work! Being able to make your own tools and then make a beautiful bowl with them is truly impressive. I would buy one of your bowl gouges.

Such a pleasure Watching you making your own tools , I must admit I steal a loot of your ideas they really help me once I get the hang of them . Cheers. :)

Today I have received first notification of your channel after subscription . Thanks for sharing.

Great video, thanks. I was going to make the same comment, that really isn't a typical bowl gouge...but then I saw the absolutely lovely bowl you produced!!

Good work. We shared this video on our homemade tools forum this week :)

Always amazing to see you work. Very beautiful job. Amazing absolutely amazing. It turned out very well there. Hopefully you get great use out of it my friend. Can't wait to see ur next videos. Keep up the great craftsmanship and hard work my friend. Forge on. Keep making. God bless.

Very well done Like the setup that you have.

Again this utterly satisfying to watch☺️🔥

very nice work and great craftsmanship. enjoyed.

Excellent video, thanks for sharing

Another great bit of work 👍

Excellent as always. 👍

Super Job ! Congrats .. 👏

Nice work all around. Darlington, South Carolina

Video très intéressante, on a presque l'impression que c'est facile tellement c'est bien fait, merci.

I like the long swage you use. Not sure why I never thought of that. Looks like a good solution to the choppy marks I have trouble with when forging gouges

Nice work!

hello, you have a useful channel)) you are an excellent craftsman, a master class in blacksmithing tongs, it would be great to see your production, thank you.

Very nice, thank you 🙏

Fantastic!!

Complimenti , uno spettacolo !

Great job well done :-)

Your work is exquisite

Always makes me smile when I see a machinist spinning the hand wheel feed with a piece of wood stock chucked between centers. Also that is a gouge that Robert Sorby would be proud of. Where do you find of chunk of ash that size ! And is the bowl North American Walnut ? Just full of comments and questions tonight, I am 🙂 Really like the rest of the assortment of turning tools you have there as well. Thank You for taking the time to share your work and techniques with us !

Chapeau.

Nice Spindle gouge.

Дружище, у тебя очень крутая мастерская. Каждое видео наслаждение для глаз) А почему ты не используешь токарный станок по дереву для изготовления рукояток? И ещё, после заточки на гриндере разве резец не перегревается? Кромка продолжает держать заточку?

Редко увидишь настолько аккуратные работы. Good job!👍

Very nice

Шикарный инструмент ! работа суперская

dobra robota!

Amazing skill

Bravo

Gerçek demirci ustası tebrik ederim

Saludos desde Santiago de Chile 🌶😉...... hi

I've watched this several times. Like how clean, tidy and well laid out workshop. Just one question, we're you using a metal turning lathe to make the gouge handle? Thanks.

Awesome video’s. I have the same type of shop 50x60 with a bricked small apartment I live in. I don’t have a power hammer, I wish I did. Are you powering that place with a generator?

Very nice chisel...what kind of steel do you use for it ? Looks like something as 6040 carbon steel.

Nice, I didn't realize you have woodworking skills as well although it only makes sense. Are your techniques common for a production smith? You work so precisely compared to a lot of the smiths I watch, who are admittedly more one-off knife makers.

Stunning work! What did you apply to the bowl to get that finish?

👍👍👍

Love your channel! I've been a subscriber for roughly ~8 months. Your editing skills are excellent! What video editing software do you use?

👍👍👍👍👍👍👍👍👍👍👍👍

отлично !

Tabagin parlamasi ocin yuzune surdugunuz sari sey nedir???

КРАСИВО!

Regarding the piece of steel you used. Was that an old bush hog blade by any chance?

I appreciate his skills. I got curious with regards to what is return on investment e.g. how long it takes for him to produce a unit and what how much he will charge for the end product. I think this is a hobby or is he making these tools for himself, right?

What number flypress did you buy from old world anvils?

A subject I need to learn. Don't know what steel you used. As I have a Forge, After I realized no verbal communication For DIY instructions. And gotten POUNDING in my head. I turned off the sound and wrote thumbs down.Just I don't learn much when I say more than the teacher 😅 🙃 but good subject.

...не пойму!-, что здесь удивительного?, с коро работа дворника будет считаться престижной!!!

Very nice job. However, what you created is called a "Roughing Gouge" in the woodturning community. A roughing gouge should only be used on spindle work and never, never ever on bowls. You will get a really nasty catch using it on bowls because you are cutting cross grain and end grain.

Ненавижу таких людей,все у них есть все они умеют все знают не то что я)

A lot of work to make an inferior tool.