Brake Pad And Brake Disc / Rotor Replacement. Citroen C4 Picasso Brake Pads And Disc / Pads Removal

Подписаться 2,1 тыс.

Просмотров 29 тыс.

50% 1

Brake pad and disc rotor replacement on car. Citroen c4 Picasso how to replace pads and discs rotors on car. Citroen c4 Citroen c4 grand Picasso Brake pads and discs How to , brake noise , brake lines , brake calliper , brake pad replacement , brake calliper rebuild , brake fluid change , brake pads don't fit in calliper , paint calliper , brake failure , brake pads grinding noise , brake pads , brake pads noise , brake pads and disc replacement , brake pads worn out sound , brake pads squeaking , brake disc skimming , brake disc replacement , brake disc rust removal , brake disc cleaning , brake disc resurfacing , brake disc noise , brake disc explodes , brake disc screw rounded , brake disc and pad replacement , brake disc stuck on hub , brake disc lip removal , brake disc cleaner , brake rotor noise , brake rotor resurfacing , brake rotor replacement , brake rotor noise sticking calliper , brake rotor rust removal spray , brake rotor rust , rust , brake rotor screw stripped , brake rotor cleaning , brembo , pagid , eicher , textar , brake rotor stuck on hub , how to , brake calliper tool , brake calliper , sticking , brake calliper tool , brake calliper won't go back in.
Proslip Brake Grease: amzn.to/3TZDozV

Опубликовано:

6 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@daniellovin1655 День назад

Best tutorial I ever seen!

@gembowicz 4 месяца назад

Just popped here to check the screws types and sizes but you've included every detail. Great video. Thanks

@Banne7722 11 месяцев назад

Huge thanks from Sweden, won't have to spend the ~1000€ the shop wants for the job!

@andreasmalmqvist3087 Месяц назад

Great guide, i dont conpliment many videos, but this was great!

@mikebolt9753 Месяц назад

thank you :)

@dawidtrybula 3 месяца назад

Couple of mistakes. Do not push caliper in first place. Undo brake bleeder first, drain a bit of brake fluid, push caliper a bit to take it of the disc, then before pushing the caliper CLEAN the rubber and end of piston, then undo bleeder again and drain filthy fluid into some bottle. Tighten up the bleeder. You will avoid all the dirt going into your ABS/ESP pump. Check brake fluid level.

@ericbrennan9601 7 месяцев назад

Great video. Great angles, lighting and detail. You made it look so simple so I gave it a try myself on my C4 Cactus. Slightly different but I followed your video and everything went smooth as the pad grease...lol Great tip about putting the copper spray on the wheel mount. The other wheel had ceased to the old disk. That wont happen again though. Thanks so much.

@mikebolt9753 7 месяцев назад

Im glad to hear my videos are giving people the confidence to have a go and tackle these types of jobs head on. Best way to learn is by giving things ago and you save a Bunch of money as well as improving your skills. Great to hear everything went well.

@paulrichardson9704 Месяц назад

I have a c4 cactus too and am thinking of having a go at this

@bilsbum Год назад

Crackin video! Great angles for capturing the process and really good visual animation to help with clarifying everything.

@mikebolt9753 Год назад

Thank you.

@YozhikvTumane 5 месяцев назад

Nothing to add. It's all been said in other comments, but the video is worth another comment for the algorithms to work on. 😊

@dawidtrybula 3 месяца назад

Tip: If rims are seized you might lose all wheel nuts a bit, start the engine, roll forward a bit and brake harshly. Then follow normal procedure.

@Pr3sarioVSU 9 месяцев назад

Fantastic video. About to pick up one of these cars as a stop gap and expect some repairs like this may be needed.

@catherinemcgraw9039 Год назад

Great demo and information Mike. Keep them coming

@mikebolt9753 Год назад

Thank you 😊

@bordersw1239 Год назад

Excellent, thanks,going to give this a go following a crazy quote from my local garage £280 - that’s £140 per hour labour!

@mikebolt9753 Год назад

Yeah I would save the money and do it yourself.

@berndtmuller3185 8 месяцев назад

Super Darstellung, spreche kein englisch, aber System verstanden. Danke

@mikebolt9753 8 месяцев назад

Vielen Dank, dass Sie sich das Video angesehen haben, und ich freue mich über den Kommentar.

@paulharvey4403 9 месяцев назад

Great video and informative. Well shot with some great animation.

@Oxigono_publications 3 месяца назад

1. You should clean the disc beforehand 2. You forgot to close the brake fluid cap

@RafaelCampos91 Год назад

Fantastic best video on the subject I have seen. Thank you.

@mikebolt9753 Год назад

Thanks :)

@scotthudson21 Год назад

Great video, im thinking of doing this on my C4 2015 hatchback mk11 type diesel, is it the same do you know? also i dont have a torque wrench so is it safe to just tighten them as much as possible? and do you need thread grip? or brake cleaner? i have copper grease, for back of pads and pad sides and housing and hte hub as well

@DBYRNE1984 11 месяцев назад

Absolutely smashing video. Excellent attention to detail. Thank you very much. Subbed

@DBYRNE1984 11 месяцев назад

Can you link the breakpads and discs.

@DBYRNE1984 11 месяцев назад

Sorry link to the site

@josemolinasanchez1040 Месяц назад

Muy profesional

@johnthornton1865 11 месяцев назад

great details video, thank you.

@emanuelegenovesi4205 3 месяца назад

Do you know how to replace abs pump. Please help me

@user-oy8jg2rd8i 3 месяца назад

Great Video, is the rear the same

@peterjfreer Год назад

Just need to whack the back of the disk rather than hit from the front - both of mine came off with a whack from a rubber mallet. Most difficult part of all this was getting the calliper spring clip off I found - need to squeeze it in the middle I later found.

@017hamilton 8 месяцев назад

Brilliant vid mike

@mikebolt9753 8 месяцев назад

Thank you mate. Appreciate that

@tainflyfishing9302 Год назад

Great video ,thanks for making it ,I'm going to give it a try

@mikebolt9753 Год назад

Thanks.

@foxbatst Год назад

u don't need threadlocker for the 2 screws of the disc. They are just for positioning. This will make it difficult next time. Otherwise, great vid with excellent animations. Top👍

@mikebolt9753 Год назад

ahh my bad. Thanks for the tip.

@user-ym6nw6rd7y 6 месяцев назад

i agree

@krivickas 3 месяца назад

Thanks for detailed video. All info that you need is here.

@mikebolt9753 3 месяца назад

Glad it was helpful!

@krivickas Месяц назад

@@mikebolt9753 what brake system is this?bosch or ate?

@garrotjax1232 10 месяцев назад

Great video! I got quoted 900 odd quid by quikfit for all 4 plus’s pads, I’ll be doing my own this time 😂

@mikebolt9753 10 месяцев назад

Holy fuck! Thats crazy. Yeah keep your money in your pocket and do it yourself for sure. Day light robbery

@eedchen9103 5 месяцев назад

ohh got it ,,, ordering some soon ,, thanks

@rinucciotete6243 7 месяцев назад

Grazie 1000

@MyScotty7 Год назад

Fantastic demo you should do more cars if possible.

@mikebolt9753 Год назад

Cheers for that. Yeah ill try and do some more car stuff at some point.

@colinwest3773 Год назад

As a retired motor vehicle lecturer this is the best video I’ve seen,except he should have been wearing gloves.

@mikebolt9753 Год назад

Thanks 👍

@matthewpritchard2385 10 месяцев назад

Why not wear gloves?

@foxbatst Год назад

Great vid 🤩

@mikebolt9753 Год назад

Thanks 😁

@berkburak Год назад

Thanks for the video! I changed the front discs and pads but in my case the bolts to caliper carrier were 18 mm. Just a warning to check it so you dont try a 19 mm right away and round the bolts. Greetings from Sweden

@mikebolt9753 Год назад

Hey, thanks for the comment :)

@peterjfreer Год назад

Yes mine needed a 18mm socket too

@tenfootvoyager 10 месяцев назад

Did mine yesterday and yes the caliper bracket bolts were 18mm. Good video.

@richardfife8192 Год назад

Need to be careful with all this grease... When it melts it will fly everywhere.

@eedchen9103 5 месяцев назад

link on where to buy /order brakes and pads ,,,,, thanks cool vid

@familysemple5390 3 месяца назад

How do you release the electric hand brake on the car when the engine is off

@user-vm9jt9jy5o Год назад

Tank you ❤❤❤❤❤❤

@Othman1baghdad 11 месяцев назад

شكرا لك عمل رائع

@mikebolt9753 11 месяцев назад

شكرا لك على التعليق ، أقدر كثيرا.

@caleidoo Год назад

Great video! Is it exactly the same at the back? And I'm guessing you need to close you brake fluid cap again in the engine bay, before pumping the pedal at the end?

@mikebolt9753 Год назад

That is correct

@peterjfreer Год назад

Slightly more tricky the back if you have an electronic handbrake - it’s definitely doable but not as easy as the front.