Muggyweld.com customer Rod Madison sent in his video testimonial along with a couple photos of his project. Rod was pleased with how quick and easy the SSF-6 silver brazing rod joined the steel to brass parts. Rod builds 1/3 scale remote control planes and purchased the SSF-6 for the job at hand. Rob wrote...So, Mike, this is steel soldered to brass. The steel tab will hook to a push rod to move the elevator up and down on my 1/3 scale Piper Cub. (PLANE) Rob followed the directions as follows - Heat both metals evenly until both metals start to change color, then rub the flux onto the metal. When the metals turn to a dull red, add the rod using the flame to flow out the deposit. Let the part cool naturally and remove the flux residue with warm water and a wire brush.
The SSF-6 will braze various metals, copper, brass, mild steel, cast iron, stainless steel, bronze, cupro-nickel, cast steel, Damascus steel, german silver, etc., in any combination. The SSF-6 does not work on white metals.
#BrazeSteelToBrass #EasySilverBraze #FluxCoatedSilverSolder
#HighStrengthSilverSolder #RemotePiperClubPlane
Please read all instructions prior to use at: www.muggyweld.com/wp-content/...
For more videos and information, or to order, visit www.muggyweld.com/product/ssf...
_________________
Please visit www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
28 фев 2021
