Brilliant idea from a car jack! Super useful tool! 

Видео нужно назвать как испортить домкрат. Это называется столярные кустарные ваймы. Для этого есть настоящие силовые ваймы, которые жмут боксы и доски, это просто для видео сделано, для мелко кустарного производства.

So much work to make a simple clamp. Lol

С таким набором специального инструмента надо заниматься чем-то полезным, а не снимать саморекламу

I love saving my time and skipping to the end to see what it's for.

This is one of those projects you have to measure, time, and cost vs. buying some clamps. I’ll go with buying clamps. Especially the pipe clamps. They are cheap enough.

Если бы у меня было столько струбцин, то я может быть был добрее. :)

Штука то может и нужная, для тех кто столярными работами занят, однако это не стоит времени потраченного на просмотр, даже с тем что я тупо включил видео за полминуты до конца.

Во первых, нужно с объявления говорить о том что предлагаешь! Во вторых, что такое винтовой пресс и как им пользоваться меня учили ещё на уроках труда в Советской Средней Школе!

Простому человеку это не надо совсем. А профессионалы столяры имеют настоящие струбцины для щитов. Испортил домкрат, надо назвать видос.

Сделано хорошо. Но разве нельзя назвать большие тиски?) А не супер шикарная идея?

As an old grease-monkey, I have a few old scissor jacks just kicking around. I have just built my new woodwork shop, and your video has given me a lot of ideas as to how to put them to use.

К авторам: вы бы начинали с готового изделия, люди бы время не теряли. Клянусь , полчаса смотрел, так и не понял, что это и как оно мне в жизни поможет .

Чтобы один разок склеить такой небольшой щит можно его и так домкратом поджать между двумя какими угодно упорами. И домкрат не портить. А для профессиональной работы, видимо, существует профессиональный инструмент.

In stead of 50 hours making that, you can buy clamps already made for $12.00. They work great!

It would be a good idea to show what you're trying to achieve at the beginning to avoid us wasting time.

Ролик:" Как испортить домкрат", потеряв кучу времени..

Buying long clamps would be a lot easier.

I can hardly contain myself

Thats impressive. That jack can be used for so many purposes. Its a simple expansion design but can carry a lot of weight and pressure. I do own one and I put it to many uses except for raising my vehicles :-)

結局、最後にできたの何？

Seen this done it's so easy! Congratulations! Brilliant!

Gute Sache. Saubere Arbeit.

very nice.well thought out.

合わせ木を作れますよ、ってことですか？

Incredible...to anyone who has never seen a pipe clamp.

Clever! Great use of an old car jack. Mahalo for sharing! : )

8 minutes of my life that I will never get back

That's a cool saw

I made a shoulder vise with one of those jacks a couple years ago, works great!

The winters are very long for this guy ............... 8 minutes of life wasted serves as a lesson to us all. At least he doesn't talk or live next door. It makes watching paint dry seem an attractive hobby.

Great imagination for use of an old car jack. You kept us waiting until the end so see what was the end project. Good job!

Excellent 👌👍👏👏👏🍺

It is videos like these that answer the question “how did I waste so many precious hours of my life watching useless videos on RU-vid. I always think it’s going to be some amazing tool and then it ends up being an hour or more worth of work to make a basic custom wood clamp out of a car jack. 😑

Buenísima herramienta para múltiples tareas en mi taller ahora mismo voy a fabricar la mía 😊

Good idea for those who work with wood projects.

I hate it when another guy is as good on the tools as myself!!! I have to admit, the Dude has some serious talent!!!

最後に出来上がったものが、何の道具になったのか全くわかりません。

Wow...a lot of camera angles. As much work goes into the filming and editing as the actual work itself. This guy really knows how to make a video! Thanks, Men's Craft

Super Clamp! Awesome!

Believe it or not, that's exactly what I had in mind. It's great to see it come to fruition here.

Amazing...Im using a power drill for that jack now whenever I need to change a tire.

I used a jack like that to free a child that got his head stuck in some railings.

good job beautiful idea

Riesiger Arbeitsaufwand ! SPIELEREI !

I think buying two or three Jorgensen clamps would be much easier. Nice assembly

Так и не понял! Для чего сломали домкрат?

Brilliant Idea is a gross overstatement !

Possibly the greatest video ever

who would have thought 2 wedges used by the Egyptians would work just as good after all this time

I made a chess board a few years ago, and all those clamps were a pain...your idea is awesome!!

Прикольно замутил,сначала подумал,что очередной стол для фрезера будет

I swapped out 2 wheels on my tool cabinet (replaced fixed with swivel), I used my 2 car jacks to elevate the cabinet, worked great. On another occasion I tried to use a car Jack to pull out some deep roots from a stump near a concrete base, but didn’t work. So yes you can use a car Jack for somethings and not for other things lol

I think the way to evaluate this is to think of the final product as a special jig, to be used where there is a lot of repetitive work producing wide boards. But if it's for casual use, I would agree with a lot of the comments that there are perfectly ordinary ways to accomplish the same thing using conventional general purpose tools. This avoids the need to store a rather bulky jig and avoids having to wreck a perfectly good jack. In particular I agree with BeachSideHank that there is a danger of what I would call buckling, and what he calls cupping ? This happened to me decades ago when building a two piece top in oak for a refectory table in the old style. They did buckle, but for some unknown reason over period of months relaxed and the table top came flat.

Молчание-золото!

Hope you don't get a flat tire on the way to buy a new jack...

Nice. But in the time to make that, I could have gone out & bought a set of cheap sash cramps.

As a pipefitter I take my Jack weld a plate on the top and use it as a flange alignment tool you put the flange on the pipe put the Jack inside jack it out and it perfectly takes the hi-lo out of the flange plus holds it up while you tack it!

Mandou muito bem achei muito produtivo gratidao brasil

Oh yes we must make it look pretty as if I care

Thanks, I make a lot of cutting boards so I can use this tool. By the way I find I learn by watching your videos and don't make as much mistakes where I do things out of order, and then have to re-do stuff at times. So thanks for that too.

You’re brilliant

ПрЕспособление... Это круто!!!!

Beautiful project . GREAT JOB .

I have accomplished the same by blocking the ends of the table with 2 by 4 and using two long clamps what a waste of time even watching this

40 years of wood working and this ignores the need to hold slats or planks flat. There will be play in the wood and mechanical restraints allowing the assembly to bow when tightened. It's an expensive DIY when there are purpose made clamps on the market too. Sorry, but no.

That's a good technique. I like it too much!

Good idea👍👍👍

Здравствуйте, а что у вас за карандаш такой?

That has clamping power like no other! It's a very powerful clamp in deed!

Simply B R I L L I A N T!!!

Wait till you need a car jack.

Was wondering where you were going with that right to the end. Nice! 👍👍

Наградил себя медалью за отвагу.....За просмотр 🤣

Best part was the "thumbs-up!"

Well that is 9mins I won't be getting back!

У этого мужика явно есть струбцинный магазин.

не лайк. криворуко дважды. упор по 3 оси нет. вообщем 20 из 100

Very cool idea

А вы молодец очень было полезное видео для меня

Clever idea but what about addressing upwards or bowing of the boards being glued when compressed.

И стоило огород городить...для разовых поделок можно в 10 раз проще...а для профи,это колхоз малопроизводительный

What a great idea.Thanks

Time to sharpen that router bit

I feel like ive just been robbed of 😳I'll never get that time spent watching this video back.. don't be like, save yourself. Run away

ПрИспособление. ПригодитЬся.

Finally! Something actually useful built from stuff lying around.

I think it's awesome

I suppose it had to happen eventually, an actual, good, practical idea from one of these sort of videos!

I feared I’d be seeing another router lift video, lol. But that jack-clamp would be super useful. I plan to make one asap. Awesome project 🥇

He works really quick.

Как же я раньше жил без склеивания дров?

I’ll stick with my bar clamps.

Pro tip: don’t use a scissor jack unless ground is firm and level. These things are terrible.

Имея такой набор инструментов не проще ли купить обычный пресс?

I think I'll use two jacks on mine

All those brilliant carpenters so proud of pointing out the obvious . I'll say...Cant, you appreciate the genius of these inventions?

Когда не чего делать и лишний домкрат.

Love the idea thankyou

Superbe travail et l'idée !!!😍🤠

Клёвая идея! Спасибо что поделился 👍