How to Make Absolutely amazing car INVENTION 

Wow, took for ever but at least I got to hear Darth Vader breathing for awhile.

I built a set of these in 1960. My patent royalties were lost in the mail.

car ramps congratulations you're only about a hundred years behind

I thought the video in the beginning, was a promo for the cordless dewalt miter saw 😄

I made a similar set from scraps I had left over from a construction project. Mine are taller and I put rubber pads on the very bottom board so they don't slip on concrete floor when driving up on them. Very stable and it was a fun project. I do like the idea of wheels to move them around. I'll probably add them to mine. Cheers!

Boa ideia! Forte, confiável, estável, simples! Muito bom! Parabéns!

Thanks so much for sharing your idea man, I appreciate it! Hello from SF California.

Thanks for the refreshment I’m sure lot of people have never thought of this personal I think these are better the $30plus cheap ramps this are not going to fail

wow that's amazing they are just like the ones i made 40 years ago

TO HEAVY....😂😂😂

For the price and the weight of the wood, I'm happy with the polymer ramps I bought 15 years ago and they still work great

Amazing! I made a set just like this (no wheels) 25 years ago.

The thumbnail caught my eye when I noticed that these ramps are nearly identical to the ones I made myself about a year ago. About the only difference is that I haven't put castors on mine. I made my own SAFE ramps after my full size truck crushed my store-bought ramps despite the ramps supposedly being able to support the weight. No way solid wood is getting crushed. The only drawback is that they are heavy. And everyone here keeps making the comment.."Why not just go out and buy some ramps?" Answer..."Because they suck!"

So you invented these ramp in 2019. I've had a set just like them for over 30 years.

Just mind blowing. Never been done before.

I think that vertical board should be strong or reinforced so as to act as a stopper too.. Not everyone has the skill and technique to stop the car before it breaks that board

Excelente proyecto. Sencillo y seguro 👌

The most interesting about this upload was the "knee carts" since I never seen those before... Fun fact(that really says more about me than anything else), but I was seriously wondering how those small wheels where going to support the weight of the car! Haha! This since I really saw an application for the thing..like drive onto and then be able to ajust the cars position sideways which could be of use in a small garage/shop...now I just feel plain stupid;-)

I like the stepped design, I'm always a little nervous driving up my continuous incline ramps.

А я брус 150*150 взял, сделал пропил и прикрутил в наклон доску, норм получилось

Great idea, make sure to block the rear wheels for safety.

An engineering marvel.

Replace the revolving wheels with fixed (non revolving) wheels, it will move forward much more easily.

Great idea, I need something like that, and have some timber at home for this. Thanks

Loose the swivel casters... Switch to straight casters... They'll be much less of a pain in the ass.

Must be a city boy. We been doin this on farms in the midwest for 100 years.

Used ta have ta make these ramps for our flatbed tow trucks 👍👍 Well done

Nice idea, although being as my workspace is limited, I have the metal type of ramps the nestle together

I like the big stop at the end of the ramps. You won't drive over them and possibly damage vehicle.

I have been planning on building the exact same thing for quite a while lol. It's kinda funny that this video popped up in my link even though I didn't research it. I have ramps but I need a longer more gradual raise because my vehicle is too low for factory ramps. I have the limber and all I just haven't needed them or had the time to piece together yet. The only difference that I had in mind was 1 small piece with 45 degree angle on both sides and the end side just a block with no angle. Personally I like my idea better but this would probably be a little easier should work as long as the end block isn't too high plus you might wanna be careful because it doesn't seem like it would make a good stop as the vehicle could just push it off. I suppose only a flat block or two laying down would give you a much better and safer stopping point and you could still use your coasters on another plank behind it which is actually quite a nice space saving idea I may inquire in mine provided I ever make it. I do have nice floor Jack's and stands but I feel much safer working under a vehicle that has all 4 wheels on the ground. Anyway nice video and quite clever.

Well that was 11 minutes ill never get back.

Those are amazing! Like the 8th wonder of the world!

Amazing !! how did you think of that .. so much easier than carving them from a block of stone ....

Am I the only one whom wanted see what the little wheels would do? 🥊🤣

Those must be those new safety flip flops I’ve been hearing about. Perfect for carpentry work and pretty much any work with power tools. 😆

I made almost the identical thing about 23 years ago. I used 2" × 12"

Great job 👍...Now add you some straps where you can pull & push your ramps 👍!!!

My Dad made a set of ramps years ago. He sandwiched his together on the sides bolted with rods and nuts all counter sunk. He cut the slope you drive up on . Wood is heavier but there’s no danger of the wood collapsing under that weight. Nice job on your ramps!

Well done, great video and right to the point. Would you please share the length of the wood for each layer?

Всё гениальное просто 🙂👍

Genial !! Gran idea amigo saludos desde argentina

Chock the rear wheels!!!!! Don't rely on the parking brake when you are underneath.

Где то у меня завалялись доски полные гвоздей с опалубки,пойду гордо дырявить колеса😁

Or just spend 30 bucks on a set of light weight ramps.

Доски у меня уже есть, осталось мерседес найти для моих досок.

Looks like a great idea. I'm making one.

Nicely done! Going to build a set for the shop! Thank you!

Missing some back wheel block chocks. So the car doesn’t accidentally roll back and crush you.

Bought a set of prefab ones for less than the cost of the wood and nails. Saved 10:51 too.

Could always undo the vertical board and add a longer one the the bottom of the horizontals then re attach the vertical for that extra inch and half. 😁

Nice, but always put some chock blocks behind the rear wheels. You might not always need them but you should be in the habit, so you don't end up forgeting to use them the very time you needed them and didn't.

nice video . I use a throw away piece of cardboard for lying on .. easier slide at 75 years not so young mechanic .I fabricated two trolley jack fixtures to jack up my Citroen C6..

I built a similar set of ramps about 30 years ago, but made mine with removable ramps. Much more versatile. Years later during Desert Storm, I had to change the nose gear tires on the KC-135 aircraft, without the proper nose gear jack. I built another set of ramps using 2 x12s, without the removable ramps. We towed the aircraft up on the ramps, then used the Main landing gear Jack on the nose gear. By putting the plane on ramps, it raised the nose tires enough to to get the MLG Jack between the tires. We ended up changing several tires using the ramps. When you have an aircraft weighing in at over 144,000 pounds, you do what you go to do to get the job done!

Теперь еще лежак на роликах надо сделать, чтобы не корячится каждый раз, залезая под машину.

I made 2 sets about 10 years ago. 2x12's. Singles for the front. Duals for the rear. I used to do commercial vechile repairs.

I made my own years ago. I think mine were better. I used 4 2x10 boards and cur a 25- 30° angle, then put another board on top. It worked fine

Great idea, my Dad made some like yours, however, they were too heavy, as are yours. Over the years I bought 2 sets of metal ramps, and broke both sets, damaged the plastic parts on the car, etc. The ones I made are shorter and use 4x4’s and studs, they’re lighter and shorter. I’ve been using them for 25+ years! I use them for oil changes, inspections, and changing parts that will be easy to access! Jim

Ottima idea, molto bravo!

Nice invention! If you did not found a name yet i have a totally fresh idea: "ramp"

I built mine in 1972 and still use them today in 2020. Lets see 4 times per year x 2 cars = 8 x 50 years = 400 oil changes + other repairs. Strange things breaking on my cars is a problem that went away 50 years ago. My 2004 Buick has NEVER seen a garage. I share the ramps with my son now.

10:51 seconds that I'll never get back. My grandpa made a set of those back in the 40's that I still use. Seriously video could have been about 30 seconds long.

I bought a pair of composite Rhino ramps at Auto Zone rated for 12K lbs about 15years ago for about $28. They even have a rubber foot on the end to prevent sliding. Strong and not heavy.

Какого у него только инструмента нет, что бы несколько досточек сколотить😂

Invent something for the heavy breathing mr Vader

Great idea! Thanks for shearing!

Casters instead of non turning wheels makes it worse.

Is it good for oil drain or do you need a pair on the rear wheels to be straight?

Thanks for showing us how to cut an angle in slow motion

Wow nice idea, maybe someday i could built one like what you did using the measurement you posted. Thanks Doc!

เครื่องมือ สุดยอดมาก

Hello pro You must concave the top end with a protrusion to hold the tires in place after climbing to ensure the truck does not slip. Have a good job ... New ideas come only after the prototype.

Thank you very much. Nice job 👍!!!

Good idea. Thank you!

Simply amazing!!!!!

I built my ramps out of 4 x 4 back in the 1970s to change oil and grease the car and my truck. My son bought me a metal set in the 1990s.

Всё гениальное просто! All ingenious simple!

Pretty slick ramps. Headed to the home Depot to see how much wood is.

Yes old hat, should use glue as well as screws.

Nice, simple and sturdy!

Complimenti per la tua professionalità

I could cut faster with a hand saw

Perfect 👍👍👍👍👍

Prachtig gemaakt, erg effectief 👍 Gr Netherlands/Holland.

Drive up car ramp ! I had these 30 years ago

8:55 Lord Vader 😂

Вес каждого трапа под 30 кг. Так то толково. Я себе сделал из бруса 100тки. Разборный. Сложность-перед поднять, это если заезжать в ограниченном пространстве двигаясь назад.

Go to a bicycle shop and get a couple boxes the bikes come in. The large panels of each side are perfect for laying on, much better than the carpet. Doesn't wrinkle, easy to slide on and when the bolt or socket falls it is much easier to find.

Excellent. What was the length and thickness of each board and what was the angle of their cutting?

I would advise you to place a block under the back wheels next time you do this, your up a hill and it’s quite easy for the van to roll back...

Somebody needs to teach that guy how to use a saw

Genius, pure genius!

Wow great idea. To all the people adding negative comments I guess your dads didn’t shoot a video 40 years ago to let us dummies in on the secret. I’ve been pricing racing ramps for my low clearance mustang and every one wants a lot more than $40 bucks.

Amazing car invention ...REALLY .🙈

It's a good design and I have just enough left over wood to build these. Don't need plastic nor welded. For me, the stopper will probably be sitting horizontally just as the rest of the planks, two small pieces on top of each other. Because my front bumper seems lower. But yes, as a mechanical engineer I congratulate this idea 👍

Jolie travail

Melhor rampa que já vi até agora parabéns

I feel like I wasted 10 minutes of my time

as rumor has it he is still using his Dewalt miter saw to this day!!!!!

Вертикальная доска слабая.Надо усилите ее железним уголками.

He should do a 3 hour video of 15 slow motion miter cuts..