Bring GIFs to Life: Animating with Round Displays & ESP32

Подписаться 7 тыс.

Просмотров 29 тыс.

50% 1

Bring your visual creativity to life with this detailed tutorial on animating GIFs using a unique round display with GC9A01 driver and ESP32.
You'll find all you need here to adapt your animated GIFs for the round display, wire them with an ESP32, and code them into being.
Explore two versatile ways to use animated GIFs: utilizing ESP32 memory or using a convenient SD Card method.
Watch all the Arduino Display videos : • Arduino & Display
Components:
Round Display with pin headers : amzn.to/3L4pud6
Round Display with JST: amzn.to/3CJjbHy
ESP32 38 narrow pins: amzn.to/3OwNKFt
SD Card Reader: amzn.to/3DUkwf0
🔔 Support the channel🔔
www.buymeacoffee.com/thelasto...
Please note that the product links are Amazon affiliate links. As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. This helps support the channel and allows me to continue creating content for you. Thank you for your support!
Code for the in-memory method:
github.com/thelastoutpostwork...
Code for the SD-Card method: github.com/thelastoutpostwork...
Tools:
SD Card Formatter: www.sdcard.org/downloads/form...
EZGIF: ezgif.com/resize
Image to C numbers: github.com/bitbank2/image_to_c
Chapters:
0:00 Introduction & Kick-off
1:07 Overview of Round Display Models
2:00 Introduction to the Memory-Based Method
2:02 Wiring the Pin Headers Model of Round Display
3:00 Wiring the Waveshare Round Display
4:04 Preparing Code for the Memory-Based Method
10:46 Utilizing Code with the Memory-Based Method
12:23 Guide to Creating Your Own Animated GIFs
19:25 Introduction to the SD Card Reader Method
19:50 Wiring the SD Card Reader
20:59 Preparing Code for the SD Card Reader Method
21:57 Formatting the Micro SD Card
23:52 Utilizing Code with the SD Card Reader Method
#RoundDisplay #ESP32 #AnimatedGIFs #DIYElectronics #CreativeCoding #VisualArt #AnimationTutorial #Arduino #MicroSDCard #TechGuide #programming #coding #beginners #tutorial #guide #stepbystep

Наука

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@emrysandjoey1928 7 месяцев назад

Im a huge fan of your videos! Could you please make a tutorial with the Beetle ESP32 - C3 and the GC9A01 screen? I think everyone would enjoy that. It is a smaller chip with the same capacity!

@thelastoutpostworkshop 7 месяцев назад

it's added to my bucket list, lets see the number of likes it will get

@paman_rese9233 День назад

thank you thank you thank you, i've done, after watch you'r video, I've been looking for more than 1 week

@ProfessorOzone 10 дней назад

Great video. Very thorough and easy to understand. Thank you for posting it.

@dandym8040 7 месяцев назад

One of the best tutorials. Thanx a lot!

@davidcampbell8048 Месяц назад

Thank you for making the complex simple.

@Sh0pd0gs 7 месяцев назад

These videos are wonderful! Thank you!

@rimmerizzane7116 7 месяцев назад

very detailed tutorial, thank you a lot, mate! hope you could post more videos like this!

@nutislucky4904 9 месяцев назад

Thank you for the animated GIFs

@richardphillips1891 9 месяцев назад

I really enjoy your videos. I purchased the various things to do this project and got it to work. I was hung up on uploading the code to the ESP32 but eventually got it figured out. Everything works great. Your videos are always well explained and I look forward to each one. Thank you.

@thelastoutpostworkshop 9 месяцев назад

Thanks a lot for your feedback!

@householdemail1305 6 месяцев назад

Special gauges are gonna become so cool and custom.

@Mitch3D Месяц назад

Thank you! this is a project saver. I couldn't find a reliable way to display animations on a small OLED display and this is the simplest solution without having to figure out the adafruit library.

@MikeMushovic 6 месяцев назад

Great video and tutorial. I got mine working with your help! Note to others new to this MCU and display - I had to disconnect power to the display to get the script to load.

@nuovocampo-cinque3189 10 месяцев назад

Great, you deserve more subscribers.

@thelastoutpostworkshop 10 месяцев назад

Thanks a lot!

@c2coder 3 месяца назад

I just found you, this it the exact thing that i need, thank you

@mgp_fsfs1722 10 месяцев назад

thanks, i was looking for a tutorial about gifs !

@ChinoSisouphanh 4 месяца назад

Thank you very much ! AAA class tutorials here ! great job

@retokaderli9010 6 месяцев назад

Very helpful video 👍🏻 Will try this with the Xiao ESP32S3 and the related round display. As a beginner, I wonder how to select the right drivers... sometimes they choice seems overwhelming, and the difference are not obvious.

@thelastoutpostworkshop 6 месяцев назад

I recommend using the TFT_eSPI library, you can follow my tutorial here : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mqSe_uMpxIs.html

@nuovocampo-cinque3189 10 месяцев назад

Tipp: You can load the smallest gifs nostromo, hyperspace and hud_6 together into the memory and play them back one after the other. More gifs, more fun. 😀

@NA-rh7iy 7 месяцев назад

How you do that please ?

@abhimanyusareen1670 3 месяца назад

@@NA-rh7iyif you have done what was shown in the video and it's working, I'm sure you can figure this out

@jorgeagustinayalachaparro8200 5 месяцев назад

Hello, excellent video, it helped me a lot but I would like to know if you have a video explaining how to switch between gifs with a button

@baddabaddabaddaswing 7 месяцев назад

This tutorial is wonderful, thank you for making it so easy to follow! Really eager to try this out myself. Out of curiousity, I'd like to use the ESP32 and a 2" 240x320 display playing a gif on a loop, how big of a file can that microprocessor handle? I have a 1min long, 30fps gif that clocks in at around 30MB, and would have only that single one running, could it handle that?

@thelastoutpostworkshop 7 месяцев назад

No it can't, 30MB is way too large, My advice is to play with the optimization of ezgif.com/resize to bring it down in size at 20FPS. I am currently working on a new video with the ESP32-S3-N16R2 which has 8MB of PSRAM.

@LowerDeckProps 10 месяцев назад

Another excellent video, Charles. With the SD card method, is it possible to play multiple GIFs in sequence (in a loop)? Thanks.

@thelastoutpostworkshop 10 месяцев назад

Yes it is possible but reading from the SD card is slow so when playing a GIF, another task could read the next GIF from the SD Card to be ready to be played

@NA-rh7iy 7 месяцев назад

Can you tell us how to do that ?@@thelastoutpostworkshop

@loganduvivier7044 Месяц назад

thank you for this video! can we add an option to change them via the phone?

@thelastoutpostworkshop Месяц назад

yes, you could add a web server in your code with a simple web interface to change the GIF

@user-gd2sg5tv4m 6 месяцев назад

Hi I got into esp32 after watching your video, I'm new to coding...but your videos always entertain me!! thank you!! I wish you happiness always!!! (It's a translator, so please understand if there are errors)

@thelastoutpostworkshop 6 месяцев назад

Thank you very much

@user-gd2sg5tv4m 6 месяцев назад

I'm having fun watching the video. I have a question. I would like to edit it based on the shared file, but I am a beginner and have not been able to solve the problem for several days, so I am asking a question. I'm trying to play a gif file, and print time text on it, but it doesn't work. What should I do because the time seems to be going under the gif image?@@thelastoutpostworkshop

@thelastoutpostworkshop 6 месяцев назад

You can achieve it in 3 ways : 1. print the text in a zone that is transparent for the GIF or 2. Reprint your text every time a a frame is drawn, but there will be some annoying flicker or 3. Modify the GIFDraw function so no pixels are drawn where the text is, it can be done, but not easily.

@user-gd2sg5tv4m 6 месяцев назад

exorbitant. result. 1. Print text in empty space > The desired design and text size do not come out... (I am a design destroyer... the design is terrible) 2. Haven't tried it yet. 3. About half of my remaining hair has fallen out. Now let's go try method number 2. I have another question. If I use the code you provided by converting a regular jpeg file rather than a gif file to an h file, is there anything that needs to be modified?@@thelastoutpostworkshop

@thelastoutpostworkshop 6 месяцев назад

The code provided works only with GIF files

@thefraw 9 месяцев назад

thanks again mate, i figured out the "A fatal error occurred: Packet content transfer stopped (received 8 bytes)" error, just remove pin 2 while you're uploading the code then plug it back in once its uploaded then reset the esp32 and hey presto!

@thelastoutpostworkshop 9 месяцев назад

Pin 2 must be at 0V during flash

@thefraw 9 месяцев назад

Great video mate! Thank you! How do I get my arduino ide to look like yours?

@thelastoutpostworkshop 9 месяцев назад

I use the "Dark" Theme with a font size of 14

@H4DC0R3 2 месяца назад

Is it possible to stop the gif after it starts playing? I ask this, because the Loop event stops working if there is a gif running, and I would like to change the current gif as soon as a button is pressed

@thelastoutpostworkshop 2 месяца назад

while the GIF is playing, you can check if the button is pressed, exit the while loop and change the gif being played : void loop() { if (gif.open((uint8_t *)GIF_IMAGE, sizeof(GIF_IMAGE), GIFDraw)) { Serial.printf("Successfully opened GIF; Canvas size = %d x %d ", gif.getCanvasWidth(), gif.getCanvasHeight()); tft.startWrite(); while (gif.playFrame(true, NULL)) { // Check if button is pressed yield(); } gif.close(); tft.endWrite(); } }

@H4DC0R3 2 месяца назад

@@thelastoutpostworkshop Thanks a lot 😇

@Mysthral1 10 месяцев назад

Salut Charles. J'ai deux questions. 1. Dans le schéma de l'écran de Aliexpress, tu le branches dans le 3 volts, mais en regardant la vidéo, je vois que tu le branche, avec le lecteur SD, dans le 5 volts. Je vois bien que ça fonctionne, mais est-ce judicieux même si les specs de mon écran dit 3 volts ? Ou bien je met le lecteur sur 5v et l'écran sur 3v ? J'ai fini le montage des connections, mais c'est juste pour être certain avant de le brancher. 2. Pour convertir les gifs tu utilises Command Prompt sur Windows, mais sur Mac sais-tu si j'utilises si ça peut se faire et naturellement les commandes ne seront pas pareils ? Je vais probablement utiliser la méthode de la carte SD, mais j'aimerais savoir quand même si je réussis à faire mes propres gifs. 😉

@thelastoutpostworkshop 10 месяцев назад

L'écran supporte 3.3v ou 5V mais pas le lecteur SD, il fonctionne seulement sur 5V. Pour le command prompt il y a une version Mac sur le site mais je ne l'ai pas essayé

@Mysthral1 10 месяцев назад

Merci@@thelastoutpostworkshop

@OriginalMasters Месяц назад

Great video! I need to load between multiple animations on the fly. How long is the delay between reloading new sequences? I need it to be no more than 1/2 a second. Is this possible with SD? Doesn’t seem so.

@thelastoutpostworkshop Месяц назад

I do not remember the load time but it is slow, maybe some SD module on the market are faster.

@OriginalMasters Месяц назад

@@thelastoutpostworkshop Thanks for that information. Could any be that fast, faster than 1/2 a second?

@thelastoutpostworkshop Месяц назад

I really do not know

@thelastoutpostworkshop 10 месяцев назад

See my other videos on Display: Master Animated GIF on the Round Display & ESP32: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mqSe_uMpxIs.html Master the Round TFT Display on ESP32 and GC9A01 driver with the TFT_eSPI library: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pmCc7z_Mi8I.html Real-Time Display Design With the Serial Monitor - No Upload, Instant Display Prototyping - Magic: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-09negq9Zk_c.html Create a Star Wars Tactical Display with the round Display: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HzHRJd7rihE.html

@luisfelipequinterogomez8267 8 дней назад

Excellent Video. now I have the arduino nano every + Whaveshare GC9A01 display that u used in previous videos. It is connected and tested as the previous video. However, when i try to verify it appears an error. I change the driver and everything but still having the issue. Do you know if there is a special consideration while using this set up?

@thelastoutpostworkshop 7 дней назад

Thank you! I am not sure what video you are referring to by "the previous video".

@luisfelipequinterogomez8267 6 дней назад

@@thelastoutpostworkshop on "Create a Star Wars Tactical Display with a the Round Display!" you used a arduino nano. but when I keep the same confg and I try to run a gif exactly how you mention it didn't work. is there something missing when using the arduino nano to run the gif?

@valeriosperati4962 Месяц назад

Really good tutorial. I managed to run it with no problem. Do you know if it is possible to stream an mp4 file?

@thelastoutpostworkshop Месяц назад

Yes it is possible, that's a good idea for a future video

@valeriosperati4962 Месяц назад

@@thelastoutpostworkshop Thanks. Waiting for a possible, next tutorial.

@williamellender2695 3 месяца назад

I’m curious, will this work on an esp32 dev kit A? I have a bunch of them and would like to use them.

@thelastoutpostworkshop 3 месяца назад

I have not tested it, but I am pretty sure it will work, all ESP32 have the same architecture. The main function used in this project is the SPI bus, and I have not encountered any esp32 dev board that does not have it

@winuwu6076 3 месяца назад

Hello, i have a question, the screen arduino, it can the animation work without those cables? :(

@thelastoutpostworkshop 3 месяца назад

do I have a link to the said screen ?

@leeskelton9715 9 месяцев назад

Great content again. If at all possible could you offer a how to video combing this display with the mp3 player starwars sound fonts connected to a PIR sensor ( sensor activates the display and the music ) ? Thanks again for these videos

@thelastoutpostworkshop 9 месяцев назад

Very good idea! I have added it to my list

@jordannorton2795 2 месяца назад

Can these be used with a portable power pack? And if so what kind? Many thanks

@thelastoutpostworkshop 2 месяца назад

GC9A01-driven round displays can be powered using portable power packs, ideally those with output voltages of 3.3V or 5V and capable of supplying a few hundred milliamperes. Lithium-ion or lithium-polymer USB power packs with voltage adjustment capabilities and built-in protection features like overcurrent and short-circuit protection are recommended for their safety and energy efficiency.

@MohammedUddin-ic9mj 2 месяца назад

will it play our project after all work is done without sd card if we power the esp32 board with power bank?

@thelastoutpostworkshop 2 месяца назад

Yes using the memory method

@jordannorton2795 Месяц назад

When i try to upload, it comes with this: Compilation error: 'animated_240_240' was not declared in this scope. How can I fix this? This is for the file that is the gif (#define GIF_IMAGE animated_240_240) not the gif converted to c

@user-zt9gz2yu9h 2 месяца назад

can this be installed on a motorbike?

@user-kb5pr6pk1o 9 месяцев назад

Great job! How to make animated .gif loop once? Thanks

@thelastoutpostworkshop 9 месяцев назад

you just have to animate it outside the loop function

@RubenRatia 6 месяцев назад

Could you do the same tutorial but adding a rechargeable lithium battery and a couple of buttons to change a gif to the next and the previous one? thank you very much it's amazing

@thelastoutpostworkshop 6 месяцев назад

Yes I could do that, I have another video using a button, but no rechargeable battery, if you want to take a look at it : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zBzIBRsckTw.html

@NA-rh7iy 7 месяцев назад

Bonjour ! I managed to make everything work perferctly with you tutorial, Thanks a lot !! I'm now looking for a solution to display multiple GIF one after the other. I guess the only way is to use the SD card solution right ? Can you please give me some help on the modification i need to do to the code ? I also have a Raspberry Zero w board, should i switch to this one to save me some of the few hair i have left ? Merci beaucoup !

@thelastoutpostworkshop 7 месяцев назад

Yes if you need to play many gifs in sequence, this chapter in the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mqSe_uMpxIs.html, covers SD card

@NA-rh7iy 7 месяцев назад

Thank you so much for your answer, i saw this part but i did;nt see anything about the change in the code to be able to read GIF one after the other automatically Can you help please ? Thanks again @@thelastoutpostworkshop

@fabianoborba3197 5 дней назад

107 / 5.000 Greetings from Brazil!! Your videos are very good, could you teach how to connect the GC9A1 screen to the Esp32 - C3?

@junaid48 13 дней назад

Hi mate can you help me i have LILYGO T-RGB 2.8 i am trying to use gifs but not success

@Ipsissimus 7 месяцев назад

Images to C seems to crush the Bit making the colours look bad. Any way to keep the quality of the gif high?

@thelastoutpostworkshop 7 месяцев назад

Before converting with image to C, did you first use ezgif.com/video-to-gif to resize it to 240x240 pixels ?

@Ipsissimus 7 месяцев назад

@@thelastoutpostworkshop I converted it to 320x170 which is the resolution of the screen I'm using. Model T S3 Lilygo. Perhaps I'm asking too much of this screen.

@thelastoutpostworkshop 7 месяцев назад

How many colors can it display ?

@aezir8753 10 месяцев назад

Hello! I have some concerns if I am to use a TTGO T-display which has a st7789v display. In the User_Setup.h, which one do I uncomment?

@thelastoutpostworkshop 10 месяцев назад

In the "User_Setup.h" you uncomment this line : //#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display In the "User_Setup_Select.h" you un comment this line : // #include // Setup file for ESP32 and TTGO T-Display ST7789V SPI bus TFT This diplay wiring is different, the pins are : TFT_MOSI 19 TFT_SCLK 18 TFT_CS 5 TFT_DC 16 TFT_RST 23

@aezir8753 10 месяцев назад

@@thelastoutpostworkshop Thank you! will try when my parts arrive!

@aezir8753 10 месяцев назад

@@thelastoutpostworkshop Hello again!, so my display has arrived and it has the pins mentioned except for the MOSI. I have a pin named "SDA", is that pin typically the MOSI pin? Im really new to these displays stuff.

@krizsi11 Месяц назад

when using the sd card is there any way to make it load the gif faster?

@thelastoutpostworkshop Месяц назад

SD card module is slow, I do not think it can load faster

@doctorrem6498 10 месяцев назад

Hi, i have an issue where the serial monitor will spit out "SD card initialization failed" then repeat "Failed to open GIF file from SPIFFS!" over and over again, i triple checked the connections and verified they're properly connected with a multimeter, the sd card was formated and i used the same sd card reader module you used, any advise?

@thelastoutpostworkshop 10 месяцев назад

Make sure the SD Card Reader VCC pin is connected to the 5V pin on the ESP32 or the VIN pin

@doctorrem6498 10 месяцев назад

Turns out the SD card reader module was faulty, it works great now!

@koleseymour9341 5 месяцев назад

Are you able to add a switch to change the gifs through the SD card?

@thelastoutpostworkshop 5 месяцев назад

yes look at this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zBzIBRsckTw.html

@koleseymour9341 5 месяцев назад

Thank you so much!

@matthewjsherman 5 месяцев назад

can i use this for non round displays? esp32? thanks I'm completely new

@thelastoutpostworkshop 5 месяцев назад

Yes you can adapt it for non round display, you will have to make sure you have enough memory if your screen is large and select the correct driver for the TFT_eSPI library. Make sure first your display is compatible with this library.

@matthewjsherman 5 месяцев назад

I am really struggling. this is the board I have. what should I write in arduino ide? ESP32 Development Board with 2.8inch LCD Arduino LVGL WIFI&Bluetooth 240*320 Smart Display Screen TFT Module With Touch WROOM@@thelastoutpostworkshop

@cchobbyfun 5 месяцев назад

The code seems to take the first defined image and display it. I'm looking to have a button press switch between two animated gifs. I'm not sure how I change which GIF line #52 opens Any thoughts?

@thelastoutpostworkshop 5 месяцев назад

You can definitely change the code to do that

@Christopher-zx3qq 5 месяцев назад

Hola!! estoy intendando hacer lo mismo, de casualidad lo lograste? Cuando quiero hacer eso me aparece que la capacidad de mi esp32 fue sobrepasada

@BenMillen 20 дней назад

keep getting exit status 1 Compilation error: exit status 1, when trying to verify code

@MrFusionDesigns 10 месяцев назад

Gresy video thank you can you use on a square display instead on round

@thelastoutpostworkshop 10 месяцев назад

Absolutely, you can use a square display

@MrFusionDesigns 10 месяцев назад

@thelastoutpostworkshop thank you for your fast response i am doing a project with a model of the batmobile tumbler and want to add animation displays to it am very new to coding if you can please advise me on how this would be achieved i would really appreciate it if i can have your contact please so i can give you some more information that woukd be awesome

@MrFusionDesigns 10 месяцев назад

If you could please let me know which square display will work would it be any colour tft display

@thelastoutpostworkshop 10 месяцев назад

any square display as long as it is an SPI (Serial Peripheral Interface) like this one : amzn.to/424J6DR

@MrFusionDesigns 10 месяцев назад

Ok thanks for your reply i will give it a try and see if i can add my own gif files thank you once again for your help

@AnxBeta 23 дня назад

Hello I can not get any screens to work with my white NodeMCU 32 boards I have tried 3 different Boards and followed every video to the letter and still I get a scrambled screen or black screen when I try yours, Not sure if it is the pin out on the screens or boards, Please help.

@thelastoutpostworkshop 23 дня назад

Please provide the URL to your screen model and also the URL to your NodeMCU board

@AnxBeta 23 дня назад

@@thelastoutpostworkshop I have bought many different screens

@thelastoutpostworkshop 23 дня назад

If you are not using the round screen GC9A01, then you will have to select the proper driver in the TFT_eSPI library and adjust SPI pins according to your screen specifications

@AnxBeta 23 дня назад

@thelastoutpostworkshop thank you, for helping I have tried all the help videos, I bought the round ones to see if it might be the NodeMCU32 the pins have a P1 instead of D1 etc.

@ddjazz 10 месяцев назад

How much current does this display consume?

@thelastoutpostworkshop 10 месяцев назад

Around 40ma

@joysticthegame7818 5 месяцев назад

merci pour cette vidéo !! je travaille en ce moment sur un projet avec un écran et une carte sd justement et ça m'aide beaucoup. Mais leproblème c'est que j'aurais aussi besoin d'images. y'aurait un moyen de vous contacter pour en parler ? en tout cas génial la vidéo !!

@bensoloart 4 месяца назад

why is there no chip select in the code? where can i change the chip select?

@thelastoutpostworkshop 4 месяца назад

It is define in your driver setup for the TFT_eSPI

@AnhNguyen-bl3md 8 дней назад

esp32 can square screen work?

@thelastoutpostworkshop 7 дней назад

Yes you only have to use the right display driver

@gabyss7085 10 месяцев назад

Is it possible to mirror a laptop screen to this round display?

@thelastoutpostworkshop 10 месяцев назад

Yes I have seen people doing it, but I have not tried it.

@gabyss7085 10 месяцев назад

@@thelastoutpostworkshop Awesome. I would love to try this for a car gauge pod.

@BenMillen 13 дней назад

i will literally pay someone to help me get an animated gif onto one of these, i bought 3 and cant get any of them to play nice (not same as this, round display has esp32 board attached))

@yilinxiao2569 24 дня назад

mate! Urgent help! The code in this video is totally different from the previous video, and I can't find the code for the second screen.

@thelastoutpostworkshop 24 дня назад

If you mean the code for the two eyes display, it's here : github.com/thelastoutpostworkshop/ESP32LCDRound240x240Eyes

@yilinxiao2569 24 дня назад

@@thelastoutpostworkshop Brother, this tutorial does not allow you to make and upload GIFs yourself!

@yilinxiao2569 25 дней назад

老哥，sd卡版本可以上传很多动画？设定依次播放吗？求助

@thelastoutpostworkshop 25 дней назад

Yes you can store a lot of animations on an SD card and play them sequentially

@yilinxiao2569 25 дней назад

@@thelastoutpostworkshop 那如果使用按键，应该添加什么代码?按键使用哪个接口？谢谢！

@MohammedUddin-ic9mj 2 месяца назад

can we able to change colour of an eye? EX: RED??

@thelastoutpostworkshop 2 месяца назад

You have to change the GIF to that

@raystinger77 23 дня назад

i have a problem while connecting sd card module and says [ 76652][E][vfs_api.cpp:23] open(): File system is not mounted Failed to open GIF file from SPIFFS!

@thelastoutpostworkshop 22 дня назад

Did you modify the code ?

@raystinger77 22 дня назад

@@thelastoutpostworkshop already but looks my tft screen its broken and blank . i use esp32 devkit v1 defined cs pin to 12

@thelastoutpostworkshop 22 дня назад

Does it work when using the memory version of the code ?

@raystinger77 22 дня назад

@@thelastoutpostworkshop yes it s works fine, curently im ordering again the sd card module other version. and i used 64gb of sd card . does it supported??

@thelastoutpostworkshop 21 день назад

No, like it's mentioned in the video the max supported is 32GB, rewatch it because it must be formatted properly

@vijaysudhan4798 3 месяца назад

Sir how to convert txt file into .ino

@thelastoutpostworkshop 3 месяца назад

I am not sure what you mean, what are your trying to do exactly ?

@user-yi4fz7qq5q 2 месяца назад

is it touchscreen

@thelastoutpostworkshop 2 месяца назад

@Mysthral1 10 месяцев назад

Superbe projet comme d'hab. J'ai reçu deux ESP32 hier et j'ai décidé d'en utiliser un ce matin pour faire ce projet. Malheureusement, je reçois ce message à chaque fois: « A fatal error occurred: Failed to write to target RAM (result was 01070000: Operation timed out). Failed uploading: uploading error: exit status 2 ». Y'a d'autres infos - il semble «voir» le chip et ces infos - en haut de ce texte si c'est important pour la compréhension. Le pire c'est que c'est idem avec l'autre ESP32 neuf. J'ai même mis un sketch simple avec le même résultat. J'espère que tu pourras m'aider avec ce problème et/ou m'aiguiller vers une solution. Merci

@thelastoutpostworkshop 10 месяцев назад

Lorsque tu upload ton code, au moment ou il tente de communiquer avec l'ESP32 sur le COM port, il faut appuyer le bouton "boot" qui est sur l'ESP32 et le maintenir jusqu'à ce que l'upload commence.

@Mysthral1 10 месяцев назад

Au moment ou il est écrit Connecting... je le fais, mais c'est trop rapide et ça me donne une erreur. Je fais essayer du début. Les autres ESP32 que j'ai, qui sont occupés, je n'ai pas besoin de le faire... heureusement. Dois-tu le faire sur les tiens ? Merci @@thelastoutpostworkshop

@Mysthral1 10 месяцев назад

J'ai essayer du début et aussi au moment ou ça dit Connecting... et c'est la même chose qui arrive. J'attend un autre ESP32 aujourd'hui, mais comme celui dans ton vidéo et je vais réessayer. Frustrant quand ça fonctionne pas. En passant, ça dit Uploading stub... juste avant de me donner l'erreur. Sais pas ce que ça veut dire. LOL@@thelastoutpostworkshop

@thelastoutpostworkshop 10 месяцев назад

oui je dois appuyer sur boot pour que l'upload démarre

@Mysthral1 10 месяцев назад

Sur la page Amazon du produit, il montre, lorsque tu sélectionne le board, DOIT ESP32 DEVKIT V1, mais moi je ne l'ai pas. Ça pourrais-tu être une cause ? Je sélectionne ESP32-WROOM-DA habituellement (ce qui est écrit sur la plaque métallique du module. @@thelastoutpostworkshop

@emrysandjoey1928 7 месяцев назад

I see that the comment got only one like :( Could you perhaps explain to me how to gain this knowledge?

@thelastoutpostworkshop 7 месяцев назад

I have looked at the specifications the ESP-C3 and it is a bit slower and a bit less of internal RAM. As for the SPI it supported. So I think you could follow my tutorial and use the ESP-C3 to play animated GIF.