Master the Round TFT Display on ESP32 and GC9A01 driver with the TFT_eSPI library

Подписаться 7 тыс.

Просмотров 36 тыс.

50% 1

Master the Round display on ESP 32 and GC9A01 driver with the TFT_eSPI library. This compact, cost-effective display is a game-changer, whether you're a seasoned electronics enthusiast or a beginner stepping into the exciting world of DIY projects.
Join me as I showcase its features, demonstrate wiring to an ESP32, and bring an uncanny eye to life, not just on one but two on two displays! It's time to add a whole new dimension to your electronic projects. So grab your gear and let's get started!
🔔 Support the channel🔔
www.buymeacoffee.com/thelasto...
Watch all the Arduino Display videos : • Arduino & Display
Code:
github.com/thelastoutpostwork...
Products:
Round Display with pin headers : amzn.to/3L4pud6
Round Display with JST: amzn.to/3CJjbHy
ESP32: amzn.to/3HeFQwV
Please note that the product links are Amazon affiliate links. As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. This helps support the channel and allows me to continue creating content for you. Thank you for your support!
Chapters:
0:00 Kick-off: Unveiling the Round Display Journey
0:55 Round Display Varieties: Exploring Your Options
1:33 Handy Hack: Making a Round Display Breadboard-Compatible
2:10 Step-by-step Guide: Wiring the Waveshare Round Display to ESP32
4:04 Tutorial: Wiring the AliExpress Round Display to ESP32
5:32 Deep Dive: Downloading and Installing the Code via Arduino IDE
8:19 Mastering TFT_eSPI: Configuring the GC9A01 Driver
11:53 The Reveal: Code Upload for a Single Eye on One Round Display
13:00 Connecting the Dots: Wiring Two Round Displays to ESP32
14:40 Double Trouble: Configuring the Code for Two Eyes on Two Round Displays
18:34 Problem-Solving: Tackling Issues with Two Round Displays
#RoundDisplay #WinWin #DisplayTechnology #DIYProjects #BreadboardFriendly #ESP32 #UncannyEyes #arduino #beginners #tutorial #guide #stepbystep

Наука

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@thelastoutpostworkshop 11 месяцев назад

See my other videos: Master Animated GIF on the Round Display & ESP32: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mqSe_uMpxIs.html Real-Time Display Design With the Serial Monitor - No Upload, Instant Display Prototyping - Magic: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-09negq9Zk_c.html Create a Star Wars Tactical Display with the round Display: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HzHRJd7rihE.html

@YuliaAlYunus 2 месяца назад

How do I change the eye animation to make it bigger? so that the LCD can be full? Thank you, I have subscribed to you

@SuperInsider87 2 месяца назад

Please, How do change the eyes animation to full screen for my TFT round display and change my gift animation from smartphone.

@squeezer04 Месяц назад

I have been trying for weeks to get “Uncanny Eyes” working on the 240x240 display and I finally found your channel. Excellent presentation and it works!. I’m anxiously waiting for your update on making the eyes bigger and centered. Then I’ll be able to incorporate them into a plastic skull for my grand nephews. Thanks again.

@OldCurmudgeon3DP 9 дней назад

Small suggestion... When I started working w/ config files many years ago I was told that MS notepad can corrupt them. Notepad++ has always been at the top of recommended editors. 👍

@thelastoutpostworkshop 9 дней назад

Never had a corrupt issue with notepad from Windows

@user-zg2bv8zx4c Год назад

thank you very much bro! I had a big choice between "Chinese copy" and "Waveshare" display. I can't afford an expensive display from Waveshare and I was worried that the Chinese display would be worse, but thanks to your video, I realized that this is not the case and that the Chinese display is fine for me. Thanks again, this is the only video that helped me

@therealeggman 4 месяца назад

Just found this and will watch it all with interest as I want a moving eye for my Mad Eye Moody cosplay.

@martinezcamarenaedgar1233 Год назад

Good video mate helped a lot! Saludos amigo!!!

@richardphillips1891 9 месяцев назад

Fun Halloween project. Got a little lost regarding everywhere the "CS" value needed to be commented out, but got it figured out. Thanks for another fun video.

@dainniro 11 месяцев назад

Thank you

@agarciaf7 2 месяца назад

Excellent video. It worked perfectly for me. Thank you very much.

@thelastoutpostworkshop 2 месяца назад

You're welcome!

@ariqintea1272 2 месяца назад

@@thelastoutpostworkshop How do I change the size of the eyes, sir? so that it can be maximized with the TFT LCD

@SuperInsider87 2 месяца назад

Thanks!

@thelastoutpostworkshop 2 месяца назад

Thank you, it's appreciated!

@systmmultiservices9409 10 дней назад

thank you for your great tutorial. everything works well I just have a question for the position of the eyes in the center of the screen on the X axis no problem but impossible to adjust the Y axis

@alessandrorogeriobatista6746 Год назад

Good morning my dear friend: it is with great satisfaction and joy that I comment that following your tutorial and file I managed to make an eye work. There was a video from another youtuber that I followed all the steps but I never managed. Fortunately your video is complete, didactic and simply sensational. Congratulations. I already subscribed to your channel and I wish you a lot of success here. I'm Brazilian and I didn't find any tutorial in Portuguese and yours is easy to follow. I used the subtitle to translate. Thanks Note: I'll see if I can get both eyes working and use a joystick.

@thelastoutpostworkshop Год назад

Thanks a lot!

@ariqintea1272 2 месяца назад

How do I change the size of the eyes, sir? so that it can be maximized with the TFT LCD@@thelastoutpostworkshop

@edh329 9 месяцев назад

Very nice work and a cool project. Nice job on the instructions as well. Got mine working the first try! Just wondering why you put the eyes so far to the top of the screen and not centered?

@thelastoutpostworkshop 9 месяцев назад

I have tried without success!

@ariqintea1272 2 месяца назад

How do I change the size of the eyes, sir? so that it can be maximized with the TFT LCD

@umekkms 2 месяца назад

how to change the position of the image so that it fills the screen?

@Narblo 17 дней назад

Do you know any other round display of no more tan 2.1" that does not have that anoying notch at the bottom? Like those in commercial smartwatches

@DaveBuildsThings Месяц назад

A great video. You managed to help me get these eyes to work! Subscribed and many thanks. As a few other people on here have asked, is there a way you know of to increase the size of the eye to better fill the display? Or at least a way to centre the eye on the display instead of having at the top of it?

@thelastoutpostworkshop Месяц назад

Thanks. The eyes are fixed image, so there is no easy way to make them bigger.

@DaveBuildsThings Месяц назад

@@thelastoutpostworkshop I spent some time trying to find a way to reverse engineer the eyes from a C code array back to an image so I could resize it. Or at least understand how the image looked in the first place. No luck. Thanks for replying.

@codingfun63 5 месяцев назад

can the eye display bigger ? seems like a waste of monitor size?

@vd853 2 месяца назад

Is there any support for micropython?

@leonardolfs16 Год назад

Best detailed video I found, congratulations. Would it be possible to implement eye control with joystick? Thanks

@thelastoutpostworkshop Год назад

Yes, absolutely

@senterterapibioglass3677 18 дней назад

Hello Sir.... thank you for your video tutorial. Very interesting project. I have question : how to change the eyes type by switch? I think it would be very cool to change the eyes type animation by using a switch.

@t.c.gnation1053 2 месяца назад

Hey w do I load other animations

@carlosp.1034 3 месяца назад

Thanks for sharing great work. It works perfectly, I'm looking for a way to remove the eyelids but I don't know how to do it. Do you know how to do it? Thank you

@thelastoutpostworkshop 3 месяца назад

Thanks! I don't know how to do remove the eyelids

@okisgoed7045 6 месяцев назад

Thanks for the nice project discription. I am not that experienced with Arduino so it is a good practice. I build it using your latest software. Loading without problems. I connected one of my 240x240 tft display with pins as seen in your video. Now get an error gpio: gpio_set_level (227): GPIO output gpio_num error. Can you help me solving this?

@AskingRapture 3 месяца назад

Do you have any videos or posts on how to configure two IR temperature sensors like the MLX90614? I'm trying to use a multiplexer but I'm a little stressed trying to get the temperature from each sensor. I want to make a tire sensor for my race car. I'm good with mechanics but bad with programming. Thank you. Nice tutorial.

@thelastoutpostworkshop 3 месяца назад

Sadly I do not have a video on this

@rw4833 9 месяцев назад

Useful and interesting video, thank you. A quick question if I may - do you see any noticeable difference in display quality between the one bought from AliExpress vs the Waveshare?

@thelastoutpostworkshop 9 месяцев назад

Absolutely no difference

@rw4833 9 месяцев назад

@@thelastoutpostworkshop cool, thanks.

@thelastoutpostworkshop Год назад

Oled Display: amzn.to/3CJjbHy

@davidhdez6066 Месяц назад

Interesting project, did you manage to make the eyes bigger? Thanks for your videos.

@thelastoutpostworkshop Месяц назад

No the images are fixed size

@KimJong_Dong 9 месяцев назад

With a realsence point cloud camera you can send OSC coordinates to the esp and track a human then have the eyes follow a human

@andybaker8472 18 дней назад

ok so ive built this but getting the following error message when i compile the code.. exit status 1 'NUM_EYES' was not declared in this scope Anyone any ideas how to sort this??

@loganduvivier7044 Месяц назад

hi, great video thank you! can you tell me how to change the size and center it please?

@thelastoutpostworkshop Месяц назад

I am going to release a video on it soon

@takiz73 11 месяцев назад

How can you make the eyes bigger? Very good work Thanks

@thelastoutpostworkshop 11 месяцев назад

I tried with no success!

@onoteczero783 8 дней назад

how to increase eye size?

@mujaheduddinmohammed5608 4 месяца назад

I have zero knowledge about this but wondering how you powering that testing board? Does it use the power of from esp32 usb supply?

@thelastoutpostworkshop 4 месяца назад

Yes it is powered through the usb cable connected to your computer

@DBBahnospherix-BahnAtmospherix 11 месяцев назад

8:19 - Hello, Super Video - Question: I am looking for a tutorial for the very interesting 40x160 display with the GC9d01 driver - is there any information on this? Thanks very much

@thelastoutpostworkshop 11 месяцев назад

Interesting, I don't know this display, do you have a link to it ?

@kauzagadow1235 Месяц назад

thank you, it worked;) and you can enlarge the eyes for the whole TFT ?;)

@thelastoutpostworkshop Месяц назад

Thanks, no they are fixed images

@kauzagadow1235 Месяц назад

@@thelastoutpostworkshopToo bad, I wanted the eye to be on the entire display :) 😊

@valysajjadi6893 2 месяца назад

i need linke eye's video fur display

@hielkebaron7007 2 месяца назад

great video! thanks! there is an X_offset function but not a Y_offset function. it would be nice to have the eyes in the middle of the screen. is that possible?

@thelastoutpostworkshop 2 месяца назад

Thanks. I never tried to move the eyes, I am pretty sure it is possible

@nicholassze7375 Месяц назад

Where i can find that?

@aditkumoon6173 Месяц назад

hello, How can you make the eyes bigger and centered?

@thelastoutpostworkshop Месяц назад

You can't since the eyes images are fixed

@lindendrache8998 3 месяца назад

Thank you for this video, it is really helpful! I have a question please, how to increase the position and the size of the eyes? I know these are small displays, but the eyes are up there in the upper "corner" and they could be in the middle and a tiny bit bigger. I need them bigger for a project... Also, is there a way to create custom eyes? Could you do a tutorial on that?

@thelastoutpostworkshop 3 месяца назад

I never tried to change the eyes size and position, good idea for a future video.

@lindendrache8998 3 месяца назад

@@thelastoutpostworkshop I am sure it would make other people happy too, I was trying for hours yesterday, but I am bad at programming..... ^^ The initial build works like a charm! Your tutorial is really great!

@manciooo77 9 месяцев назад

Thanks for video, I have solved flicker problem, THANKS!!! A question, eyes are made for 128x128 screen, do you know how can set it for 240x240 display size?

@manciooo77 9 месяцев назад

If I change #define SCREEN_WIDTH 128 #define SCREEN_HEIGHT 128 in data file, the eyes disappear, only horizontal row are displayed....

@thelastoutpostworkshop 9 месяцев назад

I don't think changing the screen dimensions will have any effects on the size of the eyes

@manciooo77 9 месяцев назад

Ok, but now the eyes aren't in center, are on top. In bottom there are a lot of space

@t.c.gnation1053 2 месяца назад

Love the video but I wanna add another type of eyes can you help

@IAW_OPSEC 11 месяцев назад

Can you transmit video from a runcam3 with these? If so is it as easy as just connecting the run cam and 1.28 lcd screen together ? It’s for a digital night vision build

@thelastoutpostworkshop 11 месяцев назад

I don't really know, I have never used a runcam3

@IAW_OPSEC 11 месяцев назад

@@thelastoutpostworkshop thanks for the quick reply.last question though what about transmitting video at all? Are these 1.28 lcd screens capable of doing that besides animations or clock viewing?

@thelastoutpostworkshop 11 месяцев назад

May transmitting video over wifi

@GrumpyEddie 9 месяцев назад

Excellent video. It worked perfectly. Thank you very much. One question is how can I get the eyes more centered onto the screen?

@thelastoutpostworkshop 9 месяцев назад

I have tried with no success!

@GrumpyEddie 9 месяцев назад

Thank you for the response. I fumble around as well and had no luck. It's still an awesome project. @@thelastoutpostworkshop

@Ron_Rhodes 8 месяцев назад

I added a yposition to the eyeInfo_t typedef and duplicated a y for every x in config.h and eye_functions.ino and moved the eyes down about 40. I little bigger would be better but we might have to regen the images.

@hauntedgroundz1189 8 месяцев назад

@@Ron_Rhodes can you share you updated code please? really appreciated!

@Ron_Rhodes 8 месяцев назад

I'm currently mangling the code to try and make the joystickswork. @@hauntedgroundz1189 but try this: Add Yposition // This struct is populated in config.h typedef struct { // Struct is defined before including config.h -- int8_t select; // pin numbers for each eye's screen select line int8_t wink; // and wink button (or -1 if none) specified there, uint8_t rotation; // also display rotation and the x offset int16_t xposition; // position of eye on the screen int16_t yposition; // position of eye on the screen } eyeInfo_t; in the main program. ... then in the config.h #define EYE_1_YPOSITION 40 // y shift for eye 1 image on display #define EYE_2_YPOSITION 40 // y shift for eye 2 image on display ... and set with new arg .. eyeInfo_t eyeInfo[] = { { TFT1_CS, LH_WINK_PIN, TFT_1_ROT, EYE_1_XPOSITION,EYE_1_YPOSITION }, // LEFT EYE chip select and wink pins, rotation and offset { TFT2_CS, RH_WINK_PIN, TFT_2_ROT, EYE_2_XPOSITION,EYE_2_YPOSITION }, // RIGHT EYE chip select and wink pins, rotation and offset }; ... in the eye functions code add line eye[e].xposition = eyeInfo[e].xposition; > eye[e].yposition = eyeInfo[e].yposition; ... and finally call the method adding ypos tft.setAddrWindow(eye[e].xposition, eye[e].yposition, SCREEN_SIZE, SCREEN_SIZE); hope this helps.

@stevenbennett6123 Месяц назад

I had a problem with uploading the code, which I eventualy traced to the display's DC pin being connected to GPIO2 on the ESP32; a common problem apparently. I could upload the code with the DC disconnected and then by re-connecting DC and resetting the ESP32 the "eye" appeared on the display - not ideal. I then edited User_Setup.h file as follows to move the display pins to safer GPIOs. On line 45 comment out (i.e. add “//” in front of the text) the line defining the ILI9341 driver. On line 65 uncomment (i.e. remove the “//”) the line defining the GC9A01 driver. On lines 212 through 218 comment out all the SPI definitions for the ILI9341. On line 223 set MOSI to 23 //DIN On line 224 set SCLK to 18 //CLK On line 225 set CS to 22 //CS On line 226 set DC to 16 //DC On line 227 set RST to 4 //RST In User_Setup_Select.h make sure that line 80 is commented out i.e. //#include // Setup file for ESP32 and GC9A01 SPI bus TFT 240x240 Otherwise the changes to User_Setup.h will be ignored and the display won't work. I think another approach could be to edit Setup46_GC9A01_ESP32.h and change the GPIOs to the safe numbers shown above and then uncomment User_Setup_Select.h line 80i.e. #include Hope this helps anyone having the same problem. Anyone using PlatformIO and an ESP-PROG JTAG programmer probably won't see this potential problem.

@AdamAlasow 2 месяца назад

can i get bigger than this monitor pls and where i can get

@pierfilippomosca1235 11 месяцев назад

Hi, can I use this display with a camera? I'm trying to made a digital nigth vision. Thank's

@thelastoutpostworkshop 11 месяцев назад

I am not sure, this could be complex because you would have to stream the video from the camera to the display through the ESP32. This is worth a try!

@Henryacerraparera-ir4ng Месяц назад

worked for me when i first tried now my display just turns on

@mujaheduddinmohammed5608 4 месяца назад

I have seen some screens with ESP32 board, its like one module. will this project on that screen??

@thelastoutpostworkshop 4 месяца назад

which module ?

@mujaheduddinmohammed5608 3 месяца назад

ESP32 GL For Arduino Development Board 1.28 Inch 240*240 IPS Smart Display Screen LCD TFT Module WiFi & Bluetooth With Touch

@massimobuby8294 11 месяцев назад

hello the code is ready to use or need modifications

@thelastoutpostworkshop 11 месяцев назад

Ready to used!

@ariqintea1272 2 месяца назад

Tolong cara ubah ukuran nya sir..

@KnightNinja-ch8cx Месяц назад

i have successfully uploaded but TFT does not light up

@thelastoutpostworkshop Месяц назад

Double check your wiring, make sure the TFT receives power

@KnightNinja-ch8cx Месяц назад

Thank you very much for your help. After I checked, it was indeed the cable that was disconnected😊😊

@KnightNinja-ch8cx Месяц назад

Thank you. It turns out the cable was disconnected

@KnightNinja-ch8cx Месяц назад

Sorry, I want to ask, the eyes are too small, where can they be changed so that the eyes are a little bigger?

@tammysuryana Месяц назад

hey

@mut34rus Год назад

Как на ваших дисплеях увеличить размер глаз?

@thelastoutpostworkshop Год назад

I am not sure how do it, but some day I will give it a try

@mut34rus Год назад

@@thelastoutpostworkshop 🤝🤝🤝✊️

@poupilouppolpy7514 Месяц назад

On est d’accord que t’es québécois right?

@thelastoutpostworkshop Месяц назад

On est d'accord

@SuperInsider87 2 месяца назад

Sir, may I request to send a .gif image of defaultEye. thanks

@thelastoutpostworkshop 2 месяца назад

You want to replace the eyes with GIF images ?

@SuperInsider87 2 месяца назад

No, but I need trouble max image for defaultEyes is not full screen. What can I full screen image to GUI for 240*240? Or replace image ?

@raymondmichael4987 5 месяцев назад

I have uploaded the code as instructed I ven downloaded tft_espi@2.5.0 version but the ye does not show up, I et E (40662) gpio: gpio_set_level(227): GPIO output gpio_num error in the terminal

@thelastoutpostworkshop 5 месяцев назад

This error is raised by ESP32 core library when setting a value to the wrong pin, this is probably due to an error in your wiring

@raymondmichael4987 5 месяцев назад

@@thelastoutpostworkshop , you’re right! I misplaced 23 pin 🤦🏾‍♂️ my bad. Everything works now