Broken Plane Restoration 

Very nice work. A lot to go through to restore what looked like a lost cause.

It is a good thing when you discover a person like you, that is mindful in the way of creating. Thanks for the lessons, OORAH!!

Hi sir👍👍thats a brilliant job dun their my friend what bit of lv can do lvly job👍🙏👍godbless my friend dino uk 🛸👏

Same again Bro.👌👌👌

Glad your video come up in my search feed!

I guess this plane will continue its life as a showpiece rather than a working plane. You haven't flattened the sole. You haven't sharpened the iron, and you haven't flattened the chip breaker edge. I'm not even going to mention that you haven't adjusted the frog relative to the mouth of the sole. Otherwise, you did get rid of the rust. Helll of a work!!!

Hey man, love the video but where is the TEST !!! Keep it up, great work ! 😃

Nice restoration of a rare Weiner No4 plane.

Çok güzel bir çalışma olmuş 👍🏼

Very nice work. I recommend that you pull the frog back out and remove the paint from the surface that contacts the blade. This will make it easier and smoother to adjust the blade and prevent sticking.

Fantastic job!!!

Güzel bir çalışma olmuş her geçen gün daha güzel içerikler görüyoruz.sonra gelecek olan restorasyonu sabırsızlıkla bekliyorum iyi çalışmalar.🧿🧿

❤ Great job!

Top notch job. Don’t forget a demo 😊

Well done 👍🏻

Wooden Marvel wonderful👏👏👏👏👍🏼

Amazing 🔥🔥🔥

Beautiful!

Good Job is very Professional..

Great Job. My Father did this. I never got the gift Thank You

Great work friend, have a nice day !!!.

Tebrikler, çok başarılı restorasyon 👍

Excellent Restoration BRO.👍👍👍

Beatiful 👍

Nice wood work and fancy tools 🪚🛠⚡️ Great job 👌🏼

Usta çok güzel olmuş bize eski zamanlara. Götürdün

Wonderful job restoring that plane with the broken handle. It looks much better and it works like a charm too. Excellent work.

Yine çok etkileyici bir çalışma olmuş,çok keyif alarak ve gururla izledim.Tebrik ediyorum❤

Nice work brother

Very old wood plane. Remarkable! Great efforts man✨✨✨

Çok güzel ve çok kaliteli bir kanal. 🎉❤

I was given a box full, 11 of them not quite as bad as this one, I need to work on.

Excellent craftsmanship!

Like the video, I think you do some talking it would make it more interesting.

Thats super cool, didnt realize it was so easy to make your own wax finishes.

Well done bro! It's a very hard work to do, especially wooden parts. I'd like to see more of them. Bravo.

Amazing 👍👍👍

Another perfect restoration. Thank you for sharing it. Keep up the fantastic work.

....Tu eres un GENIO. Muy buena restauración, de donde eres?. Un saludo desde Barcelona Catalonia.

I thought it was done for when I saw welding. Really good work. Why didn’t you close the lever cap?

You didn’t demo the plane. It didn’t appear to be a plane of much quality. However, you did a nice job of refurbishing it.

Хорошая работа!

Çok güzel oldu mükemmel seyrettikçe çok şey öğrendim

Где то лежит подобранный, выглядит также, но тут вижу по терминологии самодельщиков лайфхак - похоже на средство очистки

Moc pěkná práce, jen je škada, že je video zahlceno neustálým prohlížením "vymontovaných" částí (šrouby, matice, podložky) kazí to příjemný dojem z krásně odvedené práce :-)

👍👍👍

I'm really surprised the screws are coming out so easily!

Would’ve cracked up if he used a planer to make a new handle for this planer lol

Looks good, but will it plane wood!

I almost thought you'd brew a chocolate bar 🤣🤣

Super tare 🌽🌽🌽🌽🌽🌽🌽🌽

Omfg ❤

Thank you for the video - very joyful to watch and well done. However just to add a quick unsolicited advice here *) - do not use olive oil as it never polymerises and it will provide zero protection from water even if you soak the whole block in olive oil. Do not use straight linseed oil "as is". Use boiled linseed oil (nothing to do with "boiling" btw). Do not use wax - wax is one of the worst finishes for wood - it doesn't protect the wood at all. I would have used boiled linseed oil, shellac, danish oil, rubio monocoat or Tru-Oil (finish used for gun stocks).

Your lucky you can make all the missing and broken parts. How does it perform?

did you sharpen the blades?

What make it is, it should have left hand threads on the depth adjustment screw.

Хотелось бы увидеть этот инструмент в деле.

non-polluting rubber gloves, a little soap is better.

you put the chip breaker and the iron together the wrong way. the bevel on the iron is supposed to face down.

But does it work?

In fact you didn’t restore the plane, you use the parts of the plane to build a new one. You don’t give the real value to a old tool, preserving the marks of the past.😢😢😢

Muito lento

Lmfao yeah ok. So fake, the pitting in the shoe would never just disappear because you sanded it lol. Man these "restoration" videos out there are getting ridiculous lol.

It's fake, you can see the rust paint run when the WD40 is sprayed on it!

100% thumbs down. Worst hack job I have seen so far. Disassembled in the wrong order. Used the wrong tools when removing stuck screws. Used a flat jawed tool to remove a fragile brass ROUND object with a thin rim THEN tried to BEAT it into shape with a blasted hammer! Had the so called "restorer" bothered to use the correct tool to remove the brass object all that would have been needed was restoring the knurling, which they never bothered to do. Used the wrong screwdrivers to reassemble. Additionally, if you look at the final assembly you can see the brass adjustment knob installed is butchered. Final nail in the coffin. That hand plane was NOT painted! It was originally japanned!!!! Additional suspicious items: That plane iron and the chip breaker were badly corroded. The plane iron in the final picture showed very little in the way of a badly corroded piece of tool steel that had been "restored". Person has no business touching old tools that need restoration. I would not let this individual restore a dime store hammer.

Well done.😊