Тёмный

Broken Rusted Old Sprayer Restoration 

TysyTube Restoration
Подписаться 2,6 млн
Просмотров 1,8 млн
50% 1

Subscribe for weekly content!
This is the Pulverisateur Muratori 1955 Paris
I found this sprayer a week ago at the flea market, it cost me 8 euro and was very rust and didn't work.
All gaskets were very old an broken.
This sprayer was used for flower ,potatoes and vines treatment.
It was a very difficult reconditioning,
i found hard all the gaskets because you can not find those sizes anymore.
To remove the oxidation from copper i used vinegar, it worked very well.
To bring copper color back to life i used a metal polish and a polishing disc .
To protect against oxidation i applied a car wax that makes a barrier between the copper and exterior.
After installing all the parts it's time to test this antique jewelery.
I'm really excited that it works.
The sticker was indispensable for the correct completion of the project.
If you like this restoration please share and subscribe
Disclaimer: I am no professional. I am completely self taught and would appreciate any feedback, advice or constructive criticism and suggestions .
#restoration
#antique
#tool

Хобби

Опубликовано:

 

27 сен 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1,3 тыс.   
@Sigurther
@Sigurther 3 года назад
For anyone who wasn't paying attention, this was also technically a TysuTube face and voice reveal. You can see his face in the reflection of the mister and hear him at the end. Handsome dude too! Enjoyable restoration as usual, keep up the awesome work!
@birdie399
@birdie399 5 лет назад
I don’t know how you remembered where all the parts fitted together. Really enjoyed the video thanks. Fantastic result!
@thundermufffin
@thundermufffin 5 лет назад
i gues he got it on video :)
@jaycie5021
@jaycie5021 5 лет назад
Yeah. Need a how to video on assembling a thing disassemble it and watch it in reverse.
@slowneutron6163
@slowneutron6163 4 года назад
Lemme tell ya 'bout a neat little thing called a 'snapshot'.
@renlistra6331
@renlistra6331 3 года назад
Maybe the video is made of 2 videos and he watched the 1 vid to know it
@b00573d
@b00573d 5 лет назад
It looks like a piece of art after restoration!
@TysyTube
@TysyTube 5 лет назад
almost
@Sam-fq5hc
@Sam-fq5hc 2 года назад
@@TysyTube Almost? Everything I’ve seen you restore is art!
@RedEclipse47
@RedEclipse47 5 лет назад
Must be the coolest watering can in the world!
@TheGoodoftheLand
@TheGoodoftheLand 5 лет назад
Vice grips, adjustable wrenches and cheap hand tools...Love it! Its not about the tools, its about the hands. Great Job Brother! Looking forward to the next one!
@TysyTube
@TysyTube 5 лет назад
Thank you so much 😊, me too, i am looking to your work 👍👍👍
@ADirtyScrub
@ADirtyScrub 5 лет назад
Yeah that bench grinder is a cheap hand tool.
@slimjim8736
@slimjim8736 5 лет назад
The Good of the Land lol not in the automotive industry tools mean everything
@jaycie5021
@jaycie5021 5 лет назад
@@slimjim8736 the right tool for the right job but the only tool that needs to be high calaber sits behind your safty glasses.
@TysyTube
@TysyTube 5 лет назад
exactly
@macedindu829
@macedindu829 5 лет назад
Amazing job, but in the end, it seems less like a fire extinguisher, and more like a fire polite suggestion to knock it off device.
@staxter6
@staxter6 5 лет назад
It's a garden sprayer, pesticides and the like. But you knew that..
@TomLaios
@TomLaios 5 лет назад
@@staxter6 thanks for that.I couldn't work out what the hell it was for.From the title I thought it was some kind of weapon,a Pulverizor.
@Briselance
@Briselance 5 лет назад
Chris Brady True, but it still looks quite like a 1900-1930 kind of fire extinguisher.
@SpitfiretheCat16
@SpitfiretheCat16 5 лет назад
@@staxter6 I was gonna say, that would make an amazing sort of novelty watering can or washing sprayer.
@staxter6
@staxter6 5 лет назад
1930s Dennis Fire Engine Stock Photo_ 20060942 - follow link, things haven't changed much since the 30's. I think pulverisateur simply means 'sprayer' if my high school French is still valid.
@panting007
@panting007 2 года назад
Because of disability, I can no longer do the stuff you do. I really appreciate your craftsmanship and attention to detail. Your fabrication is second-to-none. I mean glass. Really? Glass? You are awesome. Time for some merch.
@donparker8246
@donparker8246 5 лет назад
The beautiful metal restoration gets me every time. Excellent job making the copper and brass look like brand new. Not only do you restore the function to a piece, but you bring out the craftsmanship that went into these items. In today's throw away society, that's really refreshing. Keep up the beautiful work. 😉
@WoLpH
@WoLpH 5 лет назад
Wow, amazing... I bet that looks better than when it was new
@TysyTube
@TysyTube 5 лет назад
i hope so 🤣
@MaMahmod
@MaMahmod 5 лет назад
yeah i do not think they polished it like this
@gc2797
@gc2797 5 лет назад
Wow!! The end result is amazing! Can't wait for your next project. So relaxing to watch, almost therapeutic...
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@aigomorla
@aigomorla 5 лет назад
3:09 you know when a pro restorer says he hopes to be able to restore all the parts, the project must of been one hell of a starting point.
@jcortese3300
@jcortese3300 5 лет назад
It's lovely to see these old devices brought back to life -- a bit like going back in time to view them how people of that era would have seen them.
@overspeedin
@overspeedin 5 лет назад
The sticker at the end was icing on the cake. Great job
@darrinswanson
@darrinswanson 5 лет назад
Your best restoration yet! The finished device works like it is brand new and the car polish makes it shine so nicely! Perhaps you could buy or make some dent pusher rods to remove the minor dents at some future time.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@philipkidby8273
@philipkidby8273 4 года назад
You must have the patience of a Saint. Always enjoying your projects. Thanks
@brucewoods9377
@brucewoods9377 5 лет назад
Such a satisfying resurrection. Nothing quite like highly polished brass and copper. Even more so when I saw it operating for the first time. Keep up the great work 🍾🍾
@thebarkingtoadhasarrived5451
@thebarkingtoadhasarrived5451 5 лет назад
Patience, perseverance and a lot of elbow grease went into this restoration. Well done!
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@One_of_Many750
@One_of_Many750 5 лет назад
Love How You Saw That Chemical Reaction, As The Rust Was Eaten Away.
@AutismBucks
@AutismBucks 5 лет назад
Outstanding! How many people seeing the finished product for the first time say: "What a nice replica"? I bet it blows their minds when they find out it's an original. Please keep making these videos.
@austint19
@austint19 5 лет назад
One of the best restorations I’ve ever seen in RU-vid! Absolutely phenomenal.
@TysyTube
@TysyTube 3 года назад
Thank You for Watching! Please Subscribe 🥰😘 And Check My New video Here : (The Jar is almost full) 🤩 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--EZBi9O_0rw.html
@seaphantom3587
@seaphantom3587 2 года назад
Old day :v
@clarabarata8479
@clarabarata8479 Год назад
Face reveallll
@chrisandrus2735
@chrisandrus2735 5 лет назад
After restoring brass (or copper) I would recommend putting on a couple coats of lacquer if you want to keep it from corroding again.
@WootTootZoot
@WootTootZoot 5 лет назад
Far better to use wax.
@Xxluvable94xX
@Xxluvable94xX 5 лет назад
Any special kind of wax? I like fading brass items in second had shops and polishing them up.
@cpad007
@cpad007 5 лет назад
Since it isn't likely to be used, wax could work but lacquer is longer lasting.
@jordibear
@jordibear 5 лет назад
Shezza Please don't go around polishing brass items like bowls, jugs, statuettes, and other ornamental pieces. Polishing them may LOOK nice to you, but it actually lowers their market value considerably. Tarnish on brass is not the same as corrosion, it takes a really long time to build up and the colour is really desirable to a LOT of buyers... polished pieces, not so much.
@betulaobscura
@betulaobscura 5 лет назад
@@jordibear Exactly!
@reemalkubaisi
@reemalkubaisi 5 лет назад
Amazing and satisfying. The best thing about your videos is that there is no long boring talking. Keep going
@epbead123
@epbead123 4 года назад
Fantastic job. I bet it is shinier than it was new. Belongs in a museum.
@ianstyles9759
@ianstyles9759 5 лет назад
TysyTube Restoration that is a thing of beauty, good job on the restoration. 👍
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@waltv3984
@waltv3984 3 года назад
29:12 this are the only words I even heard come out of his mouth... UWAAAHHHHHHHHH!
@pfadiva
@pfadiva 4 года назад
How could anybody not like this? Amazing work and a beautiful end result.
@15thTimeLord
@15thTimeLord 5 лет назад
That's such a gentle mist, you could asmr with that project.
@Aussieuke
@Aussieuke 5 лет назад
In your description could you include the time taken on each project. Great work and thanks for the incentive.
@kennyhimawan9494
@kennyhimawan9494 3 года назад
I did not know there is such an interesting device, what an amazing restoration! Really love your videos, I am looking forward for your next video. Nice restored oiler ;)
@nathanalaneller
@nathanalaneller 4 года назад
WOW! An old idea becomes new again. A self filling sprayer.
@rennybelle3582
@rennybelle3582 2 года назад
I just love it when copper and brass are brought back to shimmering splendour. So satisfying!
@Innochamp
@Innochamp 5 лет назад
With the Oil can you once restored 👍🏻 really beautiful finish
@CodingToFreedom
@CodingToFreedom 5 лет назад
Sweet restoration! I love the things you dig up, they are very unique!
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@clarinemaria9125
@clarinemaria9125 5 лет назад
The most impressive thing to me is how you put all back together
@demonpride1975
@demonpride1975 5 лет назад
not going to lie, that was immensely satisfying to watch. even more so watching that paint stripper clean the handle.
@ianallen2
@ianallen2 5 лет назад
A lovely piece of apparatus and restored very well. A great video. Brass and copper go well together when polished up.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@deansolomon7878
@deansolomon7878 5 лет назад
This is another MOST amazing video - I worry sometimes how you remember to put it all back together again !! 😂
@BBBCanada1
@BBBCanada1 5 лет назад
One of my favorite videos. The sticker added a nice touch.
@MrLooperg
@MrLooperg 5 лет назад
The seal you made with the hemp rope was ingenious, kudos.
@kdtrimble
@kdtrimble 5 лет назад
wow, that is awesome. it really came back beautifully. great job my friend!
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@simonelloydsimcoecampos7355
@simonelloydsimcoecampos7355 5 лет назад
Looks brand new
@TysyTube
@TysyTube 5 лет назад
Thank you so much 😊
@nairblab4061
@nairblab4061 5 лет назад
After seeing that, I think I'm glad we live in a time where we don't have to rely on that during a fire! Awesome job, that shine is incredible.
@LFKGooner
@LFKGooner 10 месяцев назад
Super restoration job. One of the best restoration videos I have ever watched on @RU-vid. Incredible editing.
@randy7068
@randy7068 4 года назад
The pickup tube needs a brass net attached to it to keep sediment from clogging the sprayer.
@lemanu666
@lemanu666 5 лет назад
Nice, belle restauration. Beaucoup de chaîne se lancent sur ce concept en ce moment, mais j'm'en fous je trouve ça relaxant à regarder. L'ASMR du bricoleur ;)
@TysyTube
@TysyTube 5 лет назад
Merci beaucoup Manuze👍👍🇫🇷
@CYellowan
@CYellowan 5 лет назад
Your videos is my secret addiction dude, restoration is satisfying as hell lol.
@etherlords88
@etherlords88 5 лет назад
Mother of God!! Even memorizing which part is going where is a big challenge!!!
@arthurmurigin
@arthurmurigin 5 лет назад
Блестяще!!! Уверен, распылитель с завода не был такой сияющий.. )) Вот только манжет (поршень) на насосе разве не должен быть из толстой кожи или резины (при разборке он развалился на куски, похоже как высохшая резина)
@user-tx5gd7xv6l
@user-tx5gd7xv6l 5 лет назад
он должен быть из кожи
@jn9475
@jn9475 5 лет назад
29:15 lol😂😂😂
@DaigoParry
@DaigoParry 5 лет назад
Uaaaaggghhhh 😖👊👊💪💪💪💪💪
@xaomeow
@xaomeow 5 лет назад
This is a great example of why I enjoy watching your channel. I like how you are able to take something that looks like it's destined for the trash heap and make it look like it's practically museum quality. Excellent job!
@El-Ritmo
@El-Ritmo 2 года назад
That is one of the most satisfying things I've ever seen. And soooooooo shiny. Bravo, excellent travail.
@alexeyminkov2366
@alexeyminkov2366 5 лет назад
24:36-25:20 - Don't think it is a good idea. Because this part works not as gasket but more as piston and it has frequent dynamic loads. After a while you will notice that. A good thing - it can be quickly replaced (with a thick rubber gasket for example). The rest is great.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊, i know is not that great but i didn’t find a gasket that fits
@TysyTube
@TysyTube 5 лет назад
and i will not utilize this so often it is only for decoration on my house, is so beautiful
@alexeyminkov2366
@alexeyminkov2366 5 лет назад
TysyTube Restoration *is so beautiful* Indeed!
@sthenzel
@sthenzel 5 лет назад
It most likely was a made of leather and cup-shaped, the top of the pump rod head should be removable to mount it. Find a piece of leather, around 1.5mm thick, punch a hole of the diameter of the groove, cut the piece to a ring, about 1.5cm wide, soak it in hot water until it is really soft and pliable, fit it to the pump rod head with the coarse side facing the handle, pull that into a piece of pipe of the pump tube´s inner diameter, let it dry, it then should have a cup shape. Fit it to the pump with applicaation of a light oil. It may take a few minutes to soften up again and then a few strokes to properly seal, but once it does, it will do for a long time, as long as it is either soft from oil or from water.
@nasters579
@nasters579 5 лет назад
TysyTube Restoration Here is an example of a lether sealing ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x03Am756r1o.html This is for an old pressure pump in a petroleum lamp ...
@glennmoreland6457
@glennmoreland6457 5 лет назад
Hi from England Well done with this... A lot of effort went into that...
@jflclc
@jflclc 4 года назад
We're under stay at home orders because of the pandemic so I'm watching all of your videos. I love them!
@peepers4763
@peepers4763 5 лет назад
Impressive, the skill needed, the patience, the attention to detail even the camera/video editing. Enjoyable to watch. Thank you all!
@dr.ibrahimhassan8501
@dr.ibrahimhassan8501 5 лет назад
Very good
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@KpyCkuT
@KpyCkuT 5 лет назад
BRAVO !!!!! 👏😃👍
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@berniesr
@berniesr 5 лет назад
Old brass always looks great refinished well done and it works what a bonus
@pebblesthecat3625
@pebblesthecat3625 5 лет назад
I have a tip for you for your vice ; The mats that are used for yoga, camping, garden kneelers is tough, flexible, cheap, and can be shaped. You can cut them to fit your vice clamp jaws into various shapes and it will hold things tightly without damaging what you are holding. Great video as always.
@lordvengerx
@lordvengerx 5 лет назад
Very epic and amazing
@TysyTube
@TysyTube 5 лет назад
thank you 😊
@lordvengerx
@lordvengerx 5 лет назад
@@TysyTube you are welcome :3
@infinitynachos8142
@infinitynachos8142 5 лет назад
I subbed dude you da best
@izlodei
@izlodei 5 лет назад
How beautiful were things 60 years ago!
@brandondonnelly7458
@brandondonnelly7458 5 лет назад
This looks like one of the hardest hints you’ve ever taken apart
@Lalfy
@Lalfy 5 лет назад
25:10 reminds me of "There's Something about Mary"
@KairiPluck
@KairiPluck 5 лет назад
You got better. Nicely done. Could have left the original label, it would have given it an antique look but hey matter of taste
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊, the stickers was too damaged
@crazycatlady5034
@crazycatlady5034 5 лет назад
It would have come off with all the soaking in the vinegar and water then polishing.
@thanhnguyenkhac28
@thanhnguyenkhac28 Год назад
My most favourite color is bronze, very gracefull for your "work of art"!
@vansolo9794
@vansolo9794 5 лет назад
Just enjoy it for what it is ....a restored piece of craftsmanship that most people would discard into the trash!
@Aborigen1992
@Aborigen1992 5 лет назад
Русский? Лайк
@user-hh6yp3xg9p
@user-hh6yp3xg9p 5 лет назад
Нє блять Український
@abdulveligafarov9210
@abdulveligafarov9210 4 года назад
НЕТ,АЗЕРБАЙДЖАНКА,НО ЛАЙ ВСЕ РАВНО ПОСТАВИЛА
@nimarus3118
@nimarus3118 5 лет назад
As close to turning back the flow of time that you will ever see.
@fergusof
@fergusof 4 года назад
FINALLY, I get to see the vintage French oil can (that you restored in a previous video) in action. Ahhhhh - satisfaction!! Good job on this one, as always.
@agustinallo6710
@agustinallo6710 Год назад
Great job, so shiny and beautiful!!!
@LarsHeineken
@LarsHeineken 5 лет назад
The pump mechanism gasket made from pipe thread sealing is probably to blame for the heavy pumping action. It's advantage (when used as a pipe thread sealer) is that it expands if it gets wet. No so helpful in this case. Otherwise great work :-)
@toryutz6914
@toryutz6914 5 лет назад
So do you do research on these things before you restore them? Half of this stuff is older than I am and I have no idea what it's supposed to look like
@juliewilson6288
@juliewilson6288 5 лет назад
So many little pieces! Thank goodness you video it as you can go back & check what goes where 😉
@TysyTube
@TysyTube 5 лет назад
exactly 🤣🤣🤣🤣
@jxbail
@jxbail 5 лет назад
Seems like a nice mister for house plants. Glad we have better now.
@grod4L
@grod4L 5 лет назад
29:00 You have some very nice arm muscles
@TysyTube
@TysyTube 5 лет назад
thank you so much ☺️
@MsRazvan29
@MsRazvan29 5 лет назад
Kein Problem wündaschön Arbeit 🤠🤝🤝🤝🤝❤🤝🤝😉
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@mxpopeye
@mxpopeye 5 лет назад
It is now a thing of beauty. Good job brother
@joachimkrogvold3703
@joachimkrogvold3703 5 лет назад
You should open up a shop and sell some of your restorations( unless you fall in love with them which would really make sense too!), wow! They are beautiful!
@bmalovic
@bmalovic 5 лет назад
There is no point in mixing baking soda and vinegar. Soda neuralize acid in vinegar, and it stop working (cleaning). What you want to neutralaze are vinegar remains on your part, after it's cleaned. Dilute baking soda in pure water (demineralized), and wash with it after treatment with acid. BTW, lemon (citric) acid work as good as vinegar, and it smells much nicer.
@khendar
@khendar 5 лет назад
I'm fairly certain he was just reusing the vinegar jugs, but filled with water when he was adding the bicarb to neutralise the vinegar.
@jaycie5021
@jaycie5021 5 лет назад
Not as well. Citric acid has a ph of 2.2 acidic acid 2.8. Both will work but vinegar is much stronger so will work faster and with less effort.
@griffinmcculloch7754
@griffinmcculloch7754 5 лет назад
@@jaycie5021 um, on a pH scale a 2.2 is a stronger acid than a 2.8 in terms of acidity. 0-2 is strong acid, 2.1-6.9 is a weak acid, 7.1-11.9 is a weak base, and 12-14 is a strong base. And of course 7 is neutral
@nordicphyromaniac
@nordicphyromaniac 5 лет назад
For the sticker part as i read the description below, there are some programs where you can take a picture and measurements of the sticker and re-create it in o program so you can get it cl9se to what it originally looked like. I don't know how much it costs to have it sent to a company that makes stickers, to make it though. Might be something to look into.
@TysyTube
@TysyTube 5 лет назад
this sticker cost me 20€, 25$ i think
@nordicphyromaniac
@nordicphyromaniac 5 лет назад
Ok
@nordicphyromaniac
@nordicphyromaniac 5 лет назад
This is a very cool project
@tarunsharma6990
@tarunsharma6990 5 лет назад
One of your best restoration
@danilko1
@danilko1 5 лет назад
When I was growing up, people would polish up old coper fire extinguishers, similar to this, and sell them in antique stores. It looks very nice. Never considered a sprayer could do the same.
@MidnightVisions
@MidnightVisions 5 лет назад
instead of using a sponge with scotchbright attached, use a Mr. Clean Magic Eraser. It works very much better than the sponge without the scraping damage caused by the scotchbright
@GunnerAsch1
@GunnerAsch1 5 лет назад
Im not sure how much American products are available easily in Romania. He did a marvelous job with simple easy to find agents.
@floorpizza8074
@floorpizza8074 5 лет назад
@@GunnerAsch1 Mr. Clean Magic Eraser is just a simple piece of melamine sponge. For some reason, us Americans are willing to spend much more if you package something basic up like that all fancy with a cool name. So even if the name brand Mr. Clean Magic Eraser isn't available where he's at (which is honestly a good thing, as they are very expensive for what they truly are), any piece of melamine sponge will work, which should be pretty widely available at craft stores worldwide.
@GunnerAsch1
@GunnerAsch1 5 лет назад
@@floorpizza8074 Ive never heard the term "melamine sponge" before. The term "melamine" is used for dishes and table tops here. What the devil is it?
@floorpizza8074
@floorpizza8074 5 лет назад
@@GunnerAsch1 Check out en.wikipedia.org/wiki/Melamine_foam It's also called "Melamine Foam" in various parts of the world, but I've always heard it referred to as "Melamine sponge." My Grandmother used to use melamine sponges to clean her wallpaper, wood, and various other items in her house. It, along with "cleaning dough" were very popular cleaning products way back when. They kind of fell out of favor, and then Mr. Clean Magic Eraser brought melamine foam back into popular use. It is *very* lightly abrasive, and likes to grab onto and hold surface contamination. It's able to do this without hurting even very delicate surfaces. I doubt that the old style "cleaning doughs" will ever come back, as the were made with volatile solvents that wouldn't pass today's VOC standards. They were extremely effective surface cleaners, though. They'd cut through grease like nothing you've ever seen, and leave a streak free finish. I used to love to play with the stuff, and help Grandma clean her house with it back when I was very young.
@nilsvids
@nilsvids 5 лет назад
27:47 When you miss the tissue
@Farlig69
@Farlig69 5 лет назад
😂😂😂😂😂😂😂😂😂😂😂😂😂
@TheFlashpua
@TheFlashpua 5 лет назад
😏
@MaheshKumar-cs3dh
@MaheshKumar-cs3dh 5 лет назад
+Poni Ponina hi
@nilsvids
@nilsvids 5 лет назад
@@MaheshKumar-cs3dh Not sure but... I think that's a dude
@TheFlashpua
@TheFlashpua 5 лет назад
@@MaheshKumar-cs3dh Hello
@danromo635
@danromo635 5 лет назад
When you get a chance, please restore that nozzle on your garden hose🤪 Nice job though!!!👍
@rodatilla
@rodatilla 5 лет назад
Gorgeous! I love that you find items that were completely ordinary at the time they were made, most of the time discarded when they got old, and make them as new. Just an ordinary plant sprayer made beautiful. You must have a neat little museum by now.
@danielovard
@danielovard 5 лет назад
where did you get the sticker reproduction made?
@TysyTube
@TysyTube 5 лет назад
i have a shop near me, but is very expensive
@raimubarak5331
@raimubarak5331 5 лет назад
You forgot to paint the handle of the pump
@Arcline1000
@Arcline1000 5 лет назад
He use an oli for it.
@michaelcoulson6483
@michaelcoulson6483 5 лет назад
Exceptional job I was on pins and needles waiting for that copper to shine up!!
@richgillis1002
@richgillis1002 4 года назад
Beautiful tank. Nice work. Wish they still made things that well.
@ChiefsFan62
@ChiefsFan62 4 года назад
Wow! Incredible transformation!
@Speeddemon3
@Speeddemon3 5 лет назад
That's ridiculous, incredible restoration!
@michaelcsiti3476
@michaelcsiti3476 Год назад
between your channel and veradona i wont watch any other restoral channel. Always such amazing work and so nicely done. Im sure others do just as well, but always love your projects!
@Xinifo
@Xinifo 5 лет назад
You are the best my friend! It's wonderful to see it working.
@TheWtfnonamez
@TheWtfnonamez 3 года назад
Absolutely beautiful. Fantastic work.
@emmaritchie8807
@emmaritchie8807 5 лет назад
i keep coming back to this video. all your restorations hold such therapeutic energy but this one in particular, and your excitement seeing it work!! so wonderful
@randomtube8226
@randomtube8226 5 лет назад
Amazing! I was not expecting it to transform like that. And it still works!
@ddssdickday
@ddssdickday 5 лет назад
I didn't think you'd be able to work your magic on this one. As always, beautiful!
Далее
Broken and Very Rusted Mill Restoration
31:01
Просмотров 2 млн
Dangerous Old Radiator - Restoration
20:45
Просмотров 2,4 млн
Vintage Rusty Scale Restoration - With Powder Paint
18:36
Stylish Plant Sprayer Restoration
24:54
Просмотров 544 тыс.
Vintage Oxidized Sprayer restoration
18:36
Просмотров 1,6 млн
Antique Vertical Steam Engine - Part 1 [Restoration]
26:51
1800s Magical Beauty Oil Lantern Restoration
26:44
Просмотров 87 тыс.
Unique Tank Dispenser Restoration
20:26
Просмотров 2,5 млн
сюрприз
1:00
Просмотров 1,1 млн