Brother LS14S Sewing Machine Review | How to thread and wind the bobbin up | Beginner Sewing Tips

Подписаться 4,8 тыс.

Просмотров 105 тыс.

50% 1

A walk through of the Brother LS14S beginner sewing machine. I show you how to set up the sewing machine, wind the bobbin up, thread the needle and how to start using the sewing machine.
As with all my videos I share lots of hacks and tips, if you are new to using a sewing machine then you need to watch this.
For more clever mom hacks and tips be sure to support by subscribing to my channel bit.ly/mamabana...
I love organisation and smart mom products as well as sharing mom hacks and tips. Found this video helpful? Please give it a Like! Thanks so much for watching. Subscribe for more mom content and to help support this mama bit.ly/mamabana...
Mama Banana to two lil Monkeys,
Shen xoxo
This video is NOT MADE OR TARGETED TO CHILDREN. It is made for mature moms.
Watch more:
- Breastfeeding hacks & tips bit.ly/bananabr...
- Mom hacks & tips bit.ly/3086PnO
- Baby changing hacks & tips when out bit.ly/2R3PSa7
- Mommy product reviews bit.ly/309jlUi
-----
SHOP Products Reviewed &/or Mentioned:
o Brother LS14S Sewing Machine
UK Amazon amzn.to/3q3QuM8
o Brother XM2701 Sewing Machine
LS14S not available in US Amazon, but this is the next best budget option.
US Amazon amzn.to/391XHXq
o Purple Thang multi-purpose sewing tool
US Amazon amzn.to/2Od1FFO
UK Amazon amzn.to/3pIVcix
My Equipment:
o Tripod selfie stick with 3 light setting
US Amazon amzn.to/3vhV0L6
UK Amazon amzn.to/3slYpWV
GET UPTO 20% OFF on qualifying products when you register for US Amazon Family
Find out how amzn.to/2NdxAW2
Disclaimer:
I shop through Amazon UK. Where an exact match is not available on the US website, I research to find the closest match with positive reviews for you.
These are Amazon Affiliate links. If you buy through these links, you can help fund my channel at no cost to you. Thank you for your support.
-----
More hacks, tips & sharing:
- Instagram: / somamabanana
- Facebook: / somamabanana
- TikTok: / somamabanana

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@MamaBanana 3 года назад

Update: When winding up the bobbin 🧵, I should have wrapped the thread around the guide (the round short knob on the grey platform, back left), then the thread will wind evenly without me holding it.

@icannotbeseen 2 года назад

Speaking from experience, if you don't wrap it and wind at really high speed, you can cut into the grey plastic bit *cough* turns out there's an actual ppoint to the knob xD

@TheThomTheThim 2 года назад

@@icannotbeseen hi I don’t see connection between touching the back of the needle and then can thread the needle easily? Haven’t missed something ? Great vidoe other wise!

@MamaBanana 2 года назад

I wet the back of the needle, the dry thread then gets drawn to the back of the needle. Strange but it works! 😄

@The_welder_ 8 месяцев назад

Just had this machine arrive from ebay with no instructions. I've never touched a sewing machine in my life so was a little daunted. This video was a massive help and I've just done my first stitches after following these instructions, very well presented. The machine is for my daughter, she will love it ❤️

@MamaBanana 8 месяцев назад

Thank you so much for your kind comment. Glad you got started. Hope you and your daughter will enjoy sewing as much as I do. Please also check out my pinned comment. I had made an error with threading the machine at the top.

@hilaryhamilton240 2 года назад

Easy, straightforward tutorial with no unnecessary chat. Many thanks for all your tips. It’s much appreciated.

@kimberlymorrow9556 Год назад

Wow!!! This was a great 'How To' video... And you are a great instructor ... I finally threaded my machine after 2 years of just looking at it (it was a gift) ... Now I'm ready for projects!!... Thanks so much for making it simple!

@MamaBanana Год назад

Aww thank you so much for your kind comment. Delighted that you’ve started your machine up. Hopefully you will enjoy many fun projects with your machine ❤️

@bzrlsh Год назад

Just received this sewing machine as a gift, haven't used one for 15 years so completely forgot how to use one. This video is very helpful, thank you!

@JJ-hr7dd 8 месяцев назад

Thanks to you I have learnt how to do all you have shown in a couple of attempts. I then showed my daughter who starts a 10 week course in it. She now goes in able to do this rather than totally blind x

@MamaBanana 8 месяцев назад

Aww I’m thrilled to hear. I hope your daughter enjoys her course. There is a slight correction to my video, so please do have a quick read for the pinned comment. Happy sewing 🧵 ❤️

@ashy1423 2 года назад

Thank you, just like you the last time I used a sewing machine was 40 years ago, but my wife can’t (won’t ???) sew 😂😂 and I’m left the privilege of showing off my skills😂😂😂. Stay well. Ash🏴󠁧󠁢󠁳󠁣󠁴󠁿

@marymccarthy339 3 года назад

Thank you for this video. I wasn't very confident about threading the needle but I feel more confident after watching your video, thank you Banana Mama

@MamaBanana 3 года назад

Thank you so much for taking the time to leave a comment. It is always appreciated 😁. Happy sewing 🧵

@danielengland5463 7 месяцев назад

Oh and that tip to thread the needle, it really works, 🙂

@sanabhatti3265 2 года назад

thankyou so much I watched video very carefully followed step by step and it's all good you made my life easier may Allah bless you lots of love xx

@magichookscrochet8885 Год назад

At 4:01 minutes that’s wrong you don’t wrap It round that top round part you only wrap it round that little circle bit to wind thread on to the spool!

@MamaBanana 8 месяцев назад

Thank you for spotting this. I’ve posted a correction in the comments. Oops 😬 😞

@sarah-jadesmith113 6 месяцев назад

I've been struggling so much with the instructions that came with my machine but wow your video helped sooo much!! thank you thank you thank you!!! xxxx

@MamaBanana 6 месяцев назад

Delighted my video helped. Please be sure to check out my pinned comment. I did make an error in one part of the video. Happy sewing ☺️

@shoutingfactory3694 2 года назад

Thanks! Just managed to successfully thread my own machine by watching this! Normally I struggle 😅

@ToTrec 3 года назад

This was really informative. I've been looking for a machine to start my own projects and you totally just sold me on this one 🙂

@itssamiyoutube 2 года назад

Just bought this machine today struggling thread it up been 7yrs since I did sewing or had a machine I'm now gona learn how to use new sewing machine I don't know how too thread it

@TheKarenohara Год назад

Thanks for this. Bought this machine for my daughter as a starter machine. This will be perfect for her to follow along!

@MamaBanana Год назад

Thank you so much for watching. Please do check out my pinned comment though, I did make one error.

@TheKarenohara Год назад

@@MamaBanana thanks, I knew that one myself from having an old machine. But the tips you have are great and just the basics like threading the machine etc is exactly what my daughter will need.

@Nyny.1000 2 года назад

Love the accent 😅 cherry on top of an informative video!

@geralynp1 3 года назад

Great video. I just ordered mine on Amazon. I'm a complete beginner and don't understand the mechanics of sewing with a machine. I look forward to getting started.

@RobBob555 3 года назад

Actually, its FULL of inaccuracies..not a "great video" at all

@itssamiyoutube 2 года назад

Got mine from argos yesterday I'm not a beginner but haven't sewing 7yrs started again stuck now cnt thread needle I've severe poor eyesight.

@traceyahearn7336 2 года назад

Great video my daughter just got this Machine didn’t no how to thread it thanks for clear demonstration

@MamaBanana 2 года назад

Thanks. But please see my pinned comment up top. I had made an error on threading. But in my comment I correct what I should have done. Sorry 😞

@54321subji 7 месяцев назад

Perfectly well presented tysm 😊

@MamaBanana 7 месяцев назад

Glad it was helpful! Please do subscribe to support ☺️ Happy sewing 🪡🧵

@danielengland5463 7 месяцев назад

Thank you so much for your video, i couldn't do this until your video and even then it took me 3 hours to get there. I am male which may have something to do with it. Thank you again 🙂

@MamaBanana 7 месяцев назад

Aww you’re so welcome. Delighted this video helped. Happy sewing 🧵 ☺️

@yasminallanna6197 2 года назад

Many thanks for your kind teaching and advice us. It is very much essay and simple. Thank you so much for.

@MamaBanana 2 года назад

Thank you so much for your kind words. Delighted you ground my video helpful 🥰

@ogechukwu3b584 2 года назад

Thanks for this. Learnt the proper way to thread.

@Artiigirl 4 года назад

Love the rubber band, hooks and magnet tips. I think I'll be doing this to my own machine as well. Thank you

@MamaBanana 4 года назад

I love the magnet. Sooo handy. Thanks Linda 🤗

@bastadtroll8922 4 года назад

hi do you own this machine? what kind of finish does it do? someone told me i should not buy a mini sewing machine like this as the seams will sut fall apart. is this true? what kindnof mtetial have you stiched so far and how good was it? Thank you in advance. love you loads.

@MamaBanana 4 года назад

I love the Brother LS14s. I’m a member of a few FB sewing groups and this is always highly recommended for beginners. It works great. So long as you back stitch at the beginning and end of your work, same as with all sewing machines, your seams will not come apart. I think the mini sewing machines that’s are not recommended may be the actual mini machines that are the size of a small loaf of bread. While this is small for a sewing machine, it’s not actually a mini sewing machine.

@bastadtroll8922 4 года назад

@@MamaBanana mama banana and pappa strawberry?

@bastadtroll8922 4 года назад

@@MamaBanana thanks for the reply. i was hoping to stitch three layers together. a thin cotton backed polyester first layer with a 5mm felt in middle and then on top the 2mm polyester again. will i need a quilting machine or can this machine handle a little thickness? The combined strenght of the material is close to denim but the thikness is a litlle more. I am ot sur if i can run the material under the foot?

@Adrian-xv9wb Месяц назад

Thank you so much it really helped

@Hephzibahchristainv 8 месяцев назад

This was very helpful, thank you

@MamaBanana 8 месяцев назад

Glad it was helpful. Thanks for watching & commenting ☺️

@debbiebebington9803 Год назад

Well done love your honesty and video I'm now subscribed xx

@MamaBanana 9 месяцев назад

Thanks for subbing & supporting 🤗

@Dylan-my2fe Год назад

Very very helpful thanks a bunch 👍👍

@MamaBanana Год назад

Delighted to hear. Thank you so much for leaving a comment & the feedback. Happy sewing 🧵

@mariaaxalurosario5480 Год назад

Hi very well explained i do have this machine but the bobbin winder is broken where can i get it repaired or replaced. Please let me know. Another thing can i get a rolled hem spare parts fixed to the this same machine. Thank you so much.

@MamaBanana 8 месяцев назад

I would get in touch with the retailer that you purchased your machine from did you get it sorted. Apologies for the delayed response. Happy new year 🥳

@shaziarashid1624 9 месяцев назад

Having problem with the bobin when threading throw the machine just brought it a week ago need more training 😢

@MamaBanana 9 месяцев назад

I’m so sorry to hear. Hope you get it resolved asap 😪

@demos113 3 года назад

The Subtitles can't handle the Irish accent, hello from Co. Antrim btw. ;-) Haven't gotten around to using mine yet. Subscribed

@MamaBanana 3 года назад

I know. Alexa & Seri have difficulty understanding me too 🤣. I got married in Ballybeg. ❤️ Antrim ❤️ 😊 It’s such a great machine. What jobs have u got planned for it? My first task was hemming the curtain, easy & fun 😊

@demos113 3 года назад

@@MamaBanana Just basic clothing repairs and maybe a mask or two.

@MamaBanana 3 года назад

That’s pretty much where I started. Enjoy 😊

@lpsangelproductions3999 2 года назад

I just got a sewing machine and now I’m watching the video, However when I’m using the bobin and using the pedal, the thread gets caught on the white holder

@MrIreneogc 2 года назад

Very useful video, Thanks for your clear demo for 1st time user of electric sewing machine. Do you recommend that I buy an Extension table?

@Andy766702 2 года назад

Thanks for this. I really struggle with threading the needle. I do have a needle threader but my eyes aren't as good as they used to be

@MamaBanana 2 года назад

No problem. I find wetting the back of the needle such a huge help 😊

@Andy766702 2 года назад

@@MamaBanana Nice tip, I shall give that a go.

@divm8559 Год назад

I need your help to decide between singer 3505 and brother gs 2700. I have seen the singer 3505 demo and stitch quality is wonderful. I haven't seen brother machines as they are not in local markets right now. Expected in a months time. I like that singer 3505 has blanket stitch that I may use for applique. Brother doesn't have it. Brother has top loading bobbin vs singer having front load bobbin. Brother speed is 860spm while singer is 750 spm. I am a beginner . Please suggest which one of the two should I buy. If you had to choose between front loading vs top loading bobbin, which one will you choose? Thanks!

@MamaBanana Год назад

I don’t have experience of the Songer machines so had to do a bit of research. From my sewing groups, Singer seems to be the preferred of the two. I liked my Brother, the model I have here was adequate, but within the year I had to upgrade to a bigger & better machine. So I would say the Singer 3505 may be the better choice. Hope this helps 😀

@gsotoaz Год назад

Great video! thank you so much

@MamaBanana Год назад

Whoop 🙌 Happy sewing 🧵 Such a fun & practical hobby 🎨😁

@lincypraju2806 Месяц назад

Hiii, I brought new brother sewing maching.funny thing is i don’t know how to stitch.but i am trying to learn how to be. I just tried but the stiches came out with soo many knots.😢

@irinaselezniova6775 Год назад

Thank you!

@MamaBanana Год назад

Most welcome & thanks for watching.

@itssamiyoutube 2 года назад

Been watching this 2days in a row still cnt thread the needle thread keeps snapping it's a bradnew machine only bought it yesterday.

@MamaBanana 2 года назад

Hi Sami, Can you check out my pinned comment? I wrapped the tread around the wrong knob up top initially 😔 Hopefully you get the issue sorted.

@stephenmeek520 8 месяцев назад

I need to shorten some flannelette pj sleeves but the sleeve wont fit over the sewing bed even with the side cover removed, any tips

@MamaBanana 8 месяцев назад

I’ve sewed baby clothes before. We need just flatten the part we’re working with & about an inch of the fabric ahead, while pushing the rest of the project out of the way so it won’t get caught under the needle. Going slow is key. So just focus on flattening about an inch of the fabric as you go, constantly readjusting the fabric. Awkward, but doable. Good luck 😄

@stephenmeek520 8 месяцев назад

@@MamaBanana thank you Mama 👍🏻👍🏻❤️

@chubbybunny915 Год назад

Thank you very helpful 🥰

@partivagautam4670 2 года назад

Hey i wanted to order this mechine but i am not sure if it comes with the thing you press with your foot or is it electrical ?

@MamaBanana 2 года назад

Hi, It comes with the foot control. Excellent sewing machine. Hope you love it 😊

@murieldonaghey1822 2 года назад

Thank you for your help

@MamaBanana 2 года назад

You’re so welcome 😉 😀

@itssamiyoutube 2 года назад

Cnt see b4 u thread needle were does back loop go?

@MamaBanana 2 года назад

There is a little horizontal hook to the top left of the needle.

@louisawestmorland1223 3 месяца назад

Arrrgh! I cannot get my machine to pick up the bobbin - I've triple checked the direction of the thread and its going around the small hooky bit inside and im getting really frustrated now 😢 Can anyone help please?! 🤞🏼

@MamaBanana 3 месяца назад

Sometimes it helps to give it a clean. So I would unscrew the bobbin plate & get a clean paint brush to gently sweep out all the lint & dust. That has worked for me before & worth a try. Good luck ☺️

@mariaaxalurosario5480 2 года назад

I know to stitch but I wanted gathers on the fabrics how to use fine rolled elastic on bobbin can you show me how to make it please I need ur help

@MA-yt4xf 2 года назад

Is this a good machine to use to shorten thicker fabric like jeans?

@MamaBanana 2 года назад

I would say it can handle 3 layers of jeans, so it should be fine for hemming jeans. I no longer have this machine as I’ve since upgraded so can’t test. But I went through layers of bamboo & cotton & it was fine. Let me know if you end up getting it. It’s a great machine for beginners & odd jobs around the house like alterations.

@MA-yt4xf 2 года назад

@@MamaBanana thank you for your insight! I’ll keep you updated if I get it :)

@myworldofcooking1289 2 года назад

Hi what is the size of the bobbin which fits this brother sewing machine?

@madcockney Год назад

In case others are interested it uses a slightly narrower (height) bobbin that are readily available on eBay, Amazon, and elsewhere.

@cindylewis5369 11 месяцев назад

The top lever doesn't come up far enough to thread the cotton through the hole

@MamaBanana 8 месяцев назад

Sorry this comment got missed. Did you manage to get this issue sorted?

@cindylewis5369 8 месяцев назад

@@MamaBanana yes I found a way,I had to modify the plastic above the arm to get access to the hole to thread cotton through

@MamaBanana 8 месяцев назад

@cindylewis5369 clever you! Well done on getting it sorted with some clever modifications ☺️ Happy New Year to you btw 🎉🎊

@laurenbruster8602 2 года назад

Hi its not working because it wont catch the bottom thread. Please can someone help?!

@MamaBanana 2 года назад

Is the bottom thread pulled out a few inches?

@MamaBanana 2 года назад

Hi Lauren, Have you been able to resolve this?

@moniregb5682 2 года назад

Hi. Can you adjust the length and width of zig zag stitches. Thank you

@redbydiekoo6741 3 года назад

Can you interlock with this machine?

@MamaBanana 3 года назад

It doesn’t have an overlock function. But if you want a tight seam, I have a hack for that. Zigzag near the edge of fabric, then you can trim off the excess with scissors. Video will be uploaded next week with full tutorial & tips. Hope that helps. Thanks so much for watching & supporting.

@livwaring6830 2 года назад

How do you realign the needle ?

@MamaBanana 2 года назад

Aside from changing stitch options, I don’t think there was an option to move the needle on this machine. Sorry, I upgraded my machine about a year ago as I do a lot of bag making.

@kimwalton3381 3 года назад

hello i want know about got new sewing machine lk14s i am not sure if multifunction kit 42 pls help me ans pls need cc subibt 888 thank xx

@donnadodd6141 3 месяца назад

I’ve had never ending problems with tension settings and have had to have it serviced and needed help endlessly. Not sure why it randomly does things, but I’ve sadly found it disappointingly, hugely unreliable!

@MamaBanana 3 месяца назад

I actually found the same. After a year, I upgraded to another machine.

@donnadodd6141 3 месяца назад

@@MamaBanana oh thanks for replying.. everyone keeps implying it’s me not threading properly and not the machine! I noticed the bobbin casing moving around so much, the thread lifted out! When I pull it apart, the bobbin housing unit is held by a small magnet!!

@MamaBanana 2 месяца назад

That’s so frustrating. I bought mine through Amazon. I got in touch with customer service and was able to return and get a full refund! Hope you manage to get the issue sorted, or better yet, a refund 🤞

@donnadodd6141 2 месяца назад

@@MamaBanana It’s beyond the warranty, so going to get a SINGER this time!

@hthiara703 Год назад

Ive got this machine the under thread keeps bunching up. I got it on number 11 id that number wrong for a straight sewing

@stephenmeek520 8 месяцев назад

Sounds like too much tension I have mine set to number 4 and it’s fine

@MamaBanana 8 месяцев назад

Excellent suggestion. Thank you 😊

@myworldofcooking1289 2 года назад

What is the size of bobbin that fits into this sewing machine?

@MamaBanana 2 года назад

Hi, I just got big standard regular plastic bobbins & they worked perfect. These are the ones that I use: amzn.to/3FlSmbb

@MamaBanana 4 года назад

What sewing project are you working on right now?

@bastadtroll8922 4 года назад

A waterproof sleeping bag. Thin rubbery like pvc coated polyester bottom layer of two sheets which sandiwch a thin layer of felt.Bottom done. The top half of the bag is polyester coated pvc externally and cotton backed polyester internally. The top layer also has a felt internal. Thin, super waterproof unlike every sleepng bag to ever exist, waterproof inside and out, cheap to make, light and easily compact and would make a difference to homeless people in rainy countries. The top and bottom layers are stiched toghether at the sides but the top layer has a zip running down slightly aside from the middle allowng the bag to open from the top. This gives it a truly snug feeling. Currently bags are zipped 3 sided around the edges. It spoils the snugness. The bottom layer is non breathable so heat isnt lost and you dont feel the cold surface below it as much. The top layer is more comfort feel internally but again non brethable externally. Non brethable material does make it hot inside however that isnt an issue when you are sleeping outsde.7 To clean the bag all you need is soapy spongee as it is waterproof. If you imagine your life as a homeless personm your seelpi gn bag is a very important possesion and it nwould be great if it could be kept clean at all times.

@MamaBanana 4 года назад

Wow 😮. That sounds like some project alright! Would you put out an ISO (In Search Of) on your local Facebook Freecycle group (just search for name of your city & the word Freecycle). Explain that it’s to help the homeless & fingers crossed you will get an offer for a machine & maybe some materials too.

@bastadtroll8922 4 года назад

@@MamaBanana Thnks for the suggestion i will give that a try. I have been collecting materials so far just missing out on a machine. i wll drop an update if it freecycle does happen. I have seen a brother indusrial macine at around £200 but currently out of my budget maybe in future. I was thining maybe if someone wanted to try it and tehey alreay had a mahcine i could help them with the design, which mterials etc. TBH im not even an amatuer yet as this would be my first project.

@markmasongardner3944 3 года назад

I can;t get the needle to pick up the bobbin thread. So frustrating

@MamaBanana 3 года назад

Is the bobbin tail out to the left like the letter P? Also needs to be pulled down & then up in the metal plate so the little notch catches it. Last thing is to have a tail about 2 inches to help catch it? Fingers crossed one of these helps 😬

@myadoak8582 14 дней назад

How do u put the teeth down?

@MamaBanana 9 дней назад

There is a small switch at the back of the machine. Behind the feed dogs/teeth. So bottom back left, it’s a flat switch. You will see it if you look at the back of the machine. Hope that helps.

@leannadodman1602 3 года назад

you filled the bobbin wrong. also didn't use the guide properly thru the machine before threading it in the needle

@MamaBanana 3 года назад

I realised this after & have made a correction in my pinned comment 😬😞

@chloefaulkner2296 2 года назад

I really recommend slowing your tutorial down.

@MamaBanana 2 года назад

Hi Chloe, Thanks for watching. I think I was just nervous. I get that way & speak too fast at presentations & in front of the camera, something that I’ve been working on. Hopefully I will get better over time 😊

@teddonovan6592 Год назад

Not a single word about the tension

@MamaBanana 8 месяцев назад

Sorry I missed this. Wishing you a happy new year 🥳

@marciehenry5334 5 месяцев назад

Mama, do you mean Thread, not tread

@MamaBanana 5 месяцев назад

In pronunciation? Might be my Chinese and Irish accent combo 😅

@barbaramatthews4921 7 месяцев назад

Personally I think you are not following the manufacturers instructions, I Have this make and model and you are doing this wrong😢.

@MamaBanana 7 месяцев назад

Thank you for your feedback. I did make a mistake, I posted this in a pinned comment. Or is there something else that I did wrong? I do appreciate you taking the time to leave a comment.

@buslegun 2 года назад

This is rubbish. It does not show how to place the bobbing thread properly. U said move to the side but you placed it when catching. When and how is missing pure garbage this . Very infuriating

@MamaBanana 2 года назад

Hi Ayodele, Thank you for taking the time to leave feedback on my video. I appreciate your comments and will take it into consideration when planning my next video. I will hopefully be able to get back into a weekly upload routine again soon. Take care x Shen