Throwing Money, Time and Brand New Parts at a "Worthless" £300 Opel Corsa

1985 Dodge Ram D150 Revival! A Mopar sitting for 5+ years! #mopar #dodge #ram #revival

Bike vs Super Bike Fast Challenge

Хабиб на эмоциях чуть не задушил брата Умара

Alat yang Membersihkan Kaki dalam Hitungan Detik 🦶🫧

Шок. Никокадо Авокадо похудел на 110 кг

Budget Friendly 1990 D150 Drop Kit!

Twizted Wrench Garage

Подписаться 772

Просмотров 28 тыс.

50% 1

Видео Поделиться Скачать Добавить в

#TWG,#D150,#Dodge,#HowTo,#DIY,#Budget,#Lowering,#Dropped,Lowered
Hey there RU-vid friends! This week on TWG we tackle lowering another dodge square body! This time its a 1990-91 Dodge D150 Short Wide with a 318 Magnum. She still has a bit of work to be road ready but she will be there soon! This time the only purchased parts for this lowering are the Lower Control Arms and new U-Bolts. So I would say this is a Budget Lowering Video for these old girls. So follow along as we take this truck from Stock To Stanced!
Parts needed-
SpeedWay Motors Flip Kit----
www.speedwaymo...
(Little off budget ish if you went this Route)
B-150 Lower Control Arms
Driver Side----Amazon Link
www.amazon.com...
Passenger Side----Amazon Link
www.amazon.com...
Don't forget to Like, Comment, Share and Subscribe. Thank You all for your continued support.

Опубликовано:

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@chiefblackcloud321 11 месяцев назад

Thank You... Way Cool ... Very helpful... Peace & Blessings in your Travels

@johnnyturbo8460 Год назад

You are right when you mentioned clean no cracked dashes. I just picked up an 86 D250 and I was shocked to see its dash so straight. I'm used to square body chevys full of cracks like my 83 C10s dash was after I "fixed it".... with a dash cover lol

@twiztedwrenchgarage Год назад

Like it never happened. Lol. But yea hard to find a dodge dash from the 80s at least that is all cracked up.

@johnnyturbo8460 Год назад

@twiztedwrenchgarage lol yup, good as new.. And yes, I agree. I was definitely pleasantly surprised

@Briancurry09 Год назад

those wheels look awesome on the truck

@ArikJar Год назад

I agree 👍

@chaddavis7228 Год назад

I've own about seven of these trucks never a broken dash . Have a good day

@twiztedwrenchgarage Год назад

Pretty awesome.

@motoalley Год назад

glad i found your channel, i've got an 88 d100 sitting in storage that i NEED to get back on the road.

@twiztedwrenchgarage Год назад

Glad you found the channel as well. Thanks for subscribing. Hope I can help you get that old girl back on the road.

@motoalley Год назад

@@twiztedwrenchgarage no problem!! I'm going to be starting to work on her in the near future. Will be posting videos of her

@ftwopointeight Год назад

Brandon LS Fruth, he's the guy that makes the tubular uppers and also the sleeve for the lower control arm pivot bolt so you can use the original bolt without having to drill the frame for the larger B-series LCA. He is in Virginia, and there's a substantial wait time on the uppers. Mine was 6 mos from order placement to delivery.

@twiztedwrenchgarage Год назад

That's a crazy wait time. But from what I've seen he does great work.

@n8rm 7 месяцев назад

Dude great video! I just picked up a 86 Dodge Ram up in Choctaw. I noticed you're up in El Reno, I'm in Norman. I just might have to make a trip up to you. I'm just missing the front grill.

@twiztedwrenchgarage 7 месяцев назад

Well thats a friend of mines shop. Im back in my Home garage.

@johnreavis9301 Год назад

Nice 66 or 67 charger at the end,my dad had a few of them when I was a kid

@twiztedwrenchgarage Год назад

Yea they are some cool car for sure.

@98Pete Год назад

Id recommend pulling shock and strut rod first though

@screamnmonkee Год назад

I have a small channel too and am looking for one of these trucks for a shop truck. Thanks for going through the process.

@twiztedwrenchgarage Год назад

Nice. Keep on going. I know where quite a few of these old truck are.

@haitiansteve 9 месяцев назад

I got one for sell

@user-hs4vf8mx4x 5 месяцев назад

Hey nice dodge truck … quick question what’s the name of that shop that has a lot of dodge trucks in front of it on the way to like Lucky star casino. Also does he sell parts thanks

@twiztedwrenchgarage 5 месяцев назад

Its just a personal shop. He does sell stuff "Sometimes" lol

@user-hs4vf8mx4x 5 месяцев назад

I’m looking for a radio and the the axles for a 85 and up 8.25 5 Lilia axles so I can run the 2005 dodge steelies cause mines a 84 with 5-5 3/4 lug pattern lol … I got a 84 dodge d150 prospector

@twiztedwrenchgarage 5 месяцев назад

@user-hs4vf8mx4x yea that would work to do that. But you get less wheel options on 5x5.5 then you do with your current bolt pattern. You have to run 2 inch spacers with the factory 20 spares anyways so I would just het space adapters to run them instead of trying to change the bolt pattern.

@HeyPap1967 Год назад

Great info, Im fixing to lower My 89 D150 I would like a 3XL and a XL SHIRT AND Decal , Thank Again !!!

@twiztedwrenchgarage Год назад

Right on. These trucks do look good lowered. I will put the order for the shirts and decal in.

@user-kc1ql6cf3r 10 месяцев назад

I have a 1992 dodge ram d150 clubcab and the entire top of the dash is gone the only things that are there is the speedometer and the radio and ac and Speedo bezel

@twiztedwrenchgarage 10 месяцев назад

Dang that sucks.

@franklong8573 9 месяцев назад

Just came across your channel , now subscribered , this truck , with the rear end flipped , is the filler for the rear end gear oil too low to get enough gear oil in it ? Also how did you mount the rear end vent tube and brake line set up ? I am gonna check out some of the rest of your videos. Thanks...

@twiztedwrenchgarage 9 месяцев назад

Thanks for subbing. Your not really flipping the axle over your just moving the axle from under the leaf springs to over them. The fill is located in the same location. All brake lines and vent tube will also be in all the same.

@franklong8573 9 месяцев назад

@@twiztedwrenchgarage Ok , got you , my mistake.

@user-hs4vf8mx4x 5 месяцев назад

lol what spring perch did u use … the part that goes between leaf spring and the axle. So I used a new spring perch and used the middle hole and then the drive shaft was too long and couldn’t bolt it up … pull it all back apart put it in the fwd hole and got the driveshaft bolted up and a mile down the road drive shaft fell out lol and new u joints and required it… so which one and way did u go with thanks

@twiztedwrenchgarage 5 месяцев назад

I got mine from speedway motors. But any 3 inch able perch will work. Glad you got your figured out. Those alignment holes can get ya for sure.

@user-hs4vf8mx4x 5 месяцев назад

So I test drove the truck for like a block or so after flip kit no issues … now my rear end u joints that are brand new just fell out and the bolts were tightened and now it’s all welded 😢…. So the original u joint fell out so I thought maybe it’s the wrong size since the truck came in pieces … what experiences have u had with wrong pinion angle ? Or wrong u joints cause I’m in a pickle lol and the side welded the shit out of the stuff

@twiztedwrenchgarage 5 месяцев назад

Dang. It is possible you had the wrong U-joints. I think the 727 and 904 use differnt ones. But its based on your outside diameter yoke span. Wrong Pinion angle can cause vibrations and binding in the driveshaft which could damage to the transmisson and rear diff.

@johnglave7958 Год назад

Brandon Furth is not making uppers anymore

@twiztedwrenchgarage Год назад

Dang he was REALLY good at it.

@KoryBrooks 10 месяцев назад

Damn, Glad I got some uppers when I did. I worked with him on a couple projects but Im not on facebook anymore and lost contact with him. He helped me get my gauge panels off the ground and been making custom gauge panels for our trucks for the past 2 years now.

@JO-bz6rf Год назад

GD! I got a 3rd gen, just got rid of my 4th gen to get a 5 gen. Both dropped, but I really am starting to feel these trucks. Good work on the D150.

@twiztedwrenchgarage Год назад

Thanks. This truck sold and is now for sale in Texas.

@HeyPap1967 Год назад

I have the Ram Charger Wheels on My 89 Also.

@twiztedwrenchgarage Год назад

I think the turbines look awesome as well.

@user-hs4vf8mx4x 5 месяцев назад

Hey quick question …. Does the flip kit actually take away the use of towing anything or loading the bed with stuff… cause I hear that installing drop shackles will get u the same amount lowering but still be able to load the bed jw have you or know someone that has tried it… thanks I’m in okc ok and looking for more truck parts if you know the way to reach the el reno auto shop thanks again

@twiztedwrenchgarage 5 месяцев назад

Well, with you will only lower the rear 2 inches. You can still haul stuff with just those but one you do a axle flip that drops the rear 6 inches. So with the flip and shackles you would need to do a c notch to the frame for towing heavy stuff. Light work is fine.

@jlsracing997 Год назад

Those are the wheels I'm looking for. Probably too far to drive to get them when he gets his 20's.

@twiztedwrenchgarage Год назад

Not sure he would sell the set he is swapping from but ill ask.

@jordankelly5466 9 месяцев назад

What are the wheels? and size? awesome work got a 91 d150 myself just last week

@twiztedwrenchgarage 9 месяцев назад

Those are 20x9 factory steel spare wheels from a 2003 up dodge ram truck.

@user-hs4vf8mx4x 5 месяцев назад

Quick question lol after my drive shaft just fell out lol do u do the pinion angel with the truck on the ground or still jacked up in the air ?

@twiztedwrenchgarage 5 месяцев назад

You want to se your pinion angle with full weight on the truck can be in the air if you like.

@roadsideguy5902 Год назад

I have two of these trucks, and one of them the dash is cracked all to hell.

@twiztedwrenchgarage Год назад

Dang thats unfortunate.

@gwendolynjackson8831 Год назад

Cut the second bump stop off on the right side

@twiztedwrenchgarage Год назад

bump stops were cut on both sides.

@gwendolynjackson8831 Год назад

I have a 1988 with AC I’m in California

@danielstockwell4095 Год назад

One last question I just order 15x10 for my truck it’s the same as in the video I have 15x8 in the front with 235/75/15 and I want the same wires on the back as the wheels that’s were on the truck in the start of the video and ideas on size for the back of mine I like how that trucks stand was

@twiztedwrenchgarage Год назад

You should be able to run up to a 275 width on the rear it's tight but fits. 265 width if you wanna be on the safer side.

@danielstockwell4095 Год назад

So like a 265 50 15?

@twiztedwrenchgarage Год назад

@@danielstockwell4095 i would think you will still want like a 265/75. if you go smaller in total tire height you will effect the accuracy of the speedometer.

@lorenzovelasquez5168 Год назад

I got an 88 ram ramcharger 2 wheel drive and looking to put 17s from a 2003 . Is there adapters for doing so? Also plan on lowering like you did on that D150. Mine is a 100. Thanks

@twiztedwrenchgarage Год назад

The offset of the 03 wheel will be different so you will need to run 2 inch spacers on front and 1-1/12 on rear. Or you can have the center of the wheel hub opened up by a machine shop to increase the size to 3.54 inchs. Or both your call.

@jerryschisler8332 Год назад

Is it possible to lower a 78 3/4 ton pick up the same way? I cant find any info on 3/4 ton dodge pick ups.

@twiztedwrenchgarage Год назад

Yes it should be doable. 71-93

@martinroblesmunos2074 Год назад

Alguien que me auxilie,no se inglés y deseo saber de qué vehículo o pickup son la orquillas que está instalando para achaparrarla,tengo una Doge ram 84 y deseo achaparrarla

@twiztedwrenchgarage Год назад

Hola. Lo siento, no sé muy bien el español. Así que estoy usando un traductor para tratar de ayudarte. Para su camión, si desea bajarlo, deberá comprar brazos de control inferiores de un Dodge B-150 de 1980 para intercambiar los suyos. para la parte trasera, todo lo que necesita es un kit de cambio de eje para el tamaño del eje que está ejecutando. Espero que esto te ayude.

@martinroblesmunos2074 Год назад

@@twiztedwrenchgarage Gracias por el apoyo, solo deseaba saber,sobre las orquillas inf,( Brazos de control) ,para adaptarlas y no cortar los resortes, Te Adradesco te hayas tomado la molestia de contestarme,mil gracias,Dios te Bendiga,( Hojala y seas creyente)

@twiztedwrenchgarage Год назад

No problema. Siempre estoy feliz de ayudar donde puedo. Con los brazos de control inferiores B150 no necesitará modificar los resortes. Las únicas modificaciones requeridas son agregar los orificios de montaje para la varilla del puntal, cortar los topes de dirección y recortar los topes de tope. Puedes usar un amortiguador de fábrica. El brazo de control inferior b150 no cambia la geometría de la suspensión, solo mueve el bolsillo del resorte hacia abajo 2 pulgadas. Avísame si tienes más preguntas.

@martinroblesmunos2074 Год назад

@@twiztedwrenchgarage Nuevamente, muchísimas gracias,mi única duda era de qué vehículo eran las orquillas,estaba en la idea de que en modelos 70's alos 90's las orquillas eran iguales, para la parte trasera eliminaré una muelle y pasaré el diferencial por la parte de arriba de las muelles, Muchísimas gracias,la verdad no creí,que tomarás en cuenta mi pregunta y menos aún que me contestaras

@twiztedwrenchgarage Год назад

Ahh ya veo. para su camión, solo elegiría un juego de 1981-1985. Lo siento, no traduje bien tu pregunta. Espero eso ayude. Continúe con las preguntas si necesita. Estoy feliz de ayudar.

@romuluscreative 2 месяца назад

if you dont lower it with a proper lowering kit you end up pushing all the joints and geometry to their max at stance versus having that normal percentage of up and down travel your alwals maxed out and just destroying all that... there are companies that take and keep your natural geometry and travel by extending the lowering kit.. they cost more sure but ride better and last better.

@twiztedwrenchgarage 2 месяца назад

I would normally agree with you. But..... there is no lowing kit for these trucks. Whe you lower these truck with van lower control arms your not stressing anything on the front as the van lower control arms actually move the spring down into a pocket 2 inches lower than the truck ones. All the ball joints and such for the most part all stay the same. Thanks for checking out the video.

@romuluscreative 2 месяца назад

@@twiztedwrenchgarage What do you mean? there are a ton of lowering kits for d100s?

@twiztedwrenchgarage 2 месяца назад

@romuluscreative I mean yea if you wanna spend 1500 plus bucks for a complete front end swap sure. But there is no company that make drop springs, drop spindles, etc. You can use dakota parts, but again, it is more costly then the way I did it.

@Jeffmacbeth-wx7ht Месяц назад

Can you tell me where to buy the control arms

@twiztedwrenchgarage Месяц назад

@@Jeffmacbeth-wx7ht I snagged mine from amazon. You can get them from any big parts places.

@Jeffmacbeth-wx7ht Месяц назад

@@twiztedwrenchgarage so my truck is a 91 d150. Do I get my lower control arms from a 91 van ?

@twiztedwrenchgarage Месяц назад

@Jeffmacbeth-wx7ht any year from 83 to 91 would work. But it has to be the b150 or b250 I believe. The b350 is different from my understanding.

@Jeffmacbeth-wx7ht Месяц назад

@@twiztedwrenchgarage thank you for the reply

@k-art-L Год назад

Is necessary use the Dakota drop spindles? Or is just to correct the camber on it?

@twiztedwrenchgarage Год назад

You don't have to but it is a correction for the camber. I have seen alot of people run them on these ole rigs with good results.

@k-art-L Год назад

@@twiztedwrenchgarage glad to hear it from you, just wanted to make sure to work on mine!! Thank you!!

@lynnvelardi4654 Год назад

hi, i'm lowering my 83 d150 using the a100 a arms. can anyone suggest shocks that will work with this?

@twiztedwrenchgarage Год назад

If your using B100 LCA stock shocks will work fine.

@ElNinio_4ceite Месяц назад

what van did they come off of ?

@twiztedwrenchgarage Месяц назад

@@ElNinio_4ceite mid 80s B150

@WyoCutlass71 Год назад

Will the control arms also work on a ‘76 d100 or just the later ones?

@twiztedwrenchgarage Год назад

Yea, they will work just the same.

@WyoCutlass71 Год назад

@@twiztedwrenchgarage Awesome! Thanks for getting back to me.

@twiztedwrenchgarage Год назад

@@WyoCutlass71 No problem. If you check our mocals garage he did the same drop to a 70s dodge.

@enjoythesho1992 4 месяца назад

What size spacers and tires are you running on the red d150?

@twiztedwrenchgarage 4 месяца назад

You can use 2 inch spacers all the way around. Tires are 245/45/20

@enjoythesho1992 4 месяца назад

@@twiztedwrenchgarage I have 2 inch spacers on mine and my tires rub my fenders yours on the red truck look like they are tucked in the fender

@twiztedwrenchgarage 4 месяца назад

@enjoythesho1992 what wheels? What size tires?

@enjoythesho1992 4 месяца назад

@@twiztedwrenchgarage 17s exact same wheels on the red dodge at the beginning of the video

@twiztedwrenchgarage 4 месяца назад

@enjoythesho1992 what size tires you running?

@danielstockwell4095 Год назад

My 91 d150 dash is all cracked up like a second gen

@twiztedwrenchgarage Год назад

Dang. Sry to hear that. I guess I've been lucky

@blueduster74 Год назад

Isn’t a B350 LCA we need?

@twiztedwrenchgarage Год назад

Any of them would work from my knowledge all the vans have the same LCA.

@blueduster74 Год назад

@@twiztedwrenchgarage okay thanks, someone had said that on a forum. Which is why you get as many sources as you can.

@danielstockwell4095 Год назад

What size American racing wheels are on the back?

@twiztedwrenchgarage Год назад

They are 15x9 factory wheels

@danielstockwell4095 Год назад

@@twiztedwrenchgarage the wide reads that were on before u lowered the back?

@twiztedwrenchgarage Год назад

@danielstockwell4095 ahh my bad those were 15x10s

@danielstockwell4095 Год назад

@@twiztedwrenchgarage thank u very much

@rhysbryant7451 Год назад

How did you clear coat your red truck ?

@twiztedwrenchgarage Год назад

i havent clear caoted it i have only cleaned and buffed what was already there. I will be giving my Black 81 the same treatment in an upcoming video.

@rhysbryant7451 Год назад

@@twiztedwrenchgarage it looks great! I have a red truck as well with the fading,I was hoping to use a patina clear coat

@twiztedwrenchgarage Год назад

@rhysbryant7451 I have heard good things about VGG clear coat product and hope to try it out one of these days.

@kenricbartholomew4898 Год назад

I have a 84 and my dash is cracked all up

@twiztedwrenchgarage Год назад

Thats a first for me only ones ive seen damaged were in the 70s models

Далее

43:14

Throwing Money, Time and Brand New Parts at a "Worthless" £300 Opel Corsa

Просмотров 627 тыс.

1985 Dodge Ram D150 Revival! A Mopar sitting for 5+ years! #mopar #dodge #ram #revival

23:43

1985 Dodge Ram D150 Revival! A Mopar sitting for 5+ years! #mopar #dodge #ram #revival

Просмотров 14 тыс.

Bike vs Super Bike Fast Challenge

00:30

Bike vs Super Bike Fast Challenge

Просмотров 13 млн

Хабиб на эмоциях чуть не задушил брата Умара

00:21

Хабиб на эмоциях чуть не задушил брата Умара

Просмотров 603 тыс.

Alat yang Membersihkan Kaki dalam Hitungan Detik 🦶🫧

00:24

Alat yang Membersihkan Kaki dalam Hitungan Detik 🦶🫧

Просмотров 11 млн

Шок. Никокадо Авокадо похудел на 110 кг

00:44

Шок. Никокадо Авокадо похудел на 110 кг

Просмотров 918 тыс.

How To Lower a 1985 Dodge D150

21:08

How To Lower a 1985 Dodge D150

Просмотров 10 тыс.

Squeezing More Power Out Of Our High-Performance 360 Mopar - Horsepower S13, E20

18:03

Squeezing More Power Out Of Our High-Performance 360 Mopar - Horsepower S13, E20

Просмотров 197 тыс.

Reviving V8-powered 1966 Dodge D100! | Roadkill Garage

16:41

Reviving V8-powered 1966 Dodge D100! | Roadkill Garage

Просмотров 346 тыс.

Dodge D150 Pickup Brocks Garage Show 14

12:20

Dodge D150 Pickup Brocks Garage Show 14

Просмотров 27 тыс.

Fully Restoration CAR Abandoned 30 Years Old | Full Restore Completed in 30 Days

49:09

Fully Restoration CAR Abandoned 30 Years Old | Full Restore Completed in 30 Days

Просмотров 10 млн

Why would anyone race a Dodge RAM D150?

9:02

Why would anyone race a Dodge RAM D150?

Просмотров 1,4 тыс.

How To Rebuild Truck Front Suspension (First Gen Dodge Ram, Ramcharger)

28:33

How To Rebuild Truck Front Suspension (First Gen Dodge Ram, Ramcharger)

Просмотров 89 тыс.

90's First Gen Dodge Ram W150 Revival! ~4x4 Short Bed~ #mopar #dodge #revival #trucks

31:12

90's First Gen Dodge Ram W150 Revival! ~4x4 Short Bed~ #mopar #dodge #revival #trucks

Просмотров 16 тыс.

Mopar 360 Build on a $2,500 Budget - Horsepower S13, E17

17:54

Mopar 360 Build on a $2,500 Budget - Horsepower S13, E17

Просмотров 813 тыс.

Bike vs Super Bike Fast Challenge

00:30

Bike vs Super Bike Fast Challenge

Просмотров 13 млн