Budget Friendly Truck Bed Lights - FOR ANY TRUCK!!!! (Coupon code below)

Подписаться 8 тыс.

Просмотров 48 тыс.

50% 1

Here is a link to a wiring diagram for my bed lights for those that are interested:
drive.google.com/file/d/17Qm1...
Head over to my Instagram for more pictures of projects:
/ waterfowler_41
In this video I walk through how I installed LED bed lights in the bed of my Rebel. My truck did not come with factory bed lights. It was cheaper and easier to install a set from Amazon and DIY the wiring.
Very happy with the light output and ease of use. Might add a mag switch later on but these will work great for now!
You can use WATERFOWLER for 5% off at Nilight's website link below.
Led lights: amzn.to/2XpYGOB
Switch: amzn.to/3EgpUI4
Positaps: amzn.to/3Effsk7
In-line fuse: amzn.to/3CcLaNh
Coupon Codes
Diode Dynamics/FORM Lighting - Waterfowler41 for free shipping
Truck Trolley - WATERFOWLERFREESHIP for free shipping
Suspensionlifts.com - Waterfowler41 for 5% off
Shifts and Grins - waterfowler41 for 5% off
FitCAM - rfrram150 for 10% off
Brink Wheels - Waterfowler for $100 off your order
Corsa Performance - Waterfowler for 5% off
Jam Handle - Waterfowler41 for 15% off
Magic Brand - Waterfowler41 for 15% off
Lamin-X for 20% off your order, use this link: laminx.refr.cc/waterfowler41
Thanks,
WF41

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@gs8716 3 года назад

Finally someone using the the 12 volt power from the trailer hitch, Sooo much easier...Great job & thank you....

@RK-kn1ud Год назад

On many trucks where the they 7-pin plug is a factory installed option, the 12v power is usually switched through a relay. Many trucks lose power to that connector when the truck is shut off. Just food for thought.

@WaterFowler41 Год назад

Not 5th gen Rams

@RK-kn1ud Год назад

@@WaterFowler41 That's excellent then. I figured that considering you didn't mention losing power back there. I'm going to have to jump my relay if I don't want to run a power wire to the tailgate. Since you're in the comments section, I might as well mention that the fuse you installed may be pointless if the circuit is already fused up front. You may have been able to save some effort there.

@armandox7 3 года назад

wow those are pretty neat taps! these give me much more confidence in pulling power!

@Kevsadone 2 года назад

Thanks for taking the time to do this.

@nathanbritton1019 3 года назад

Just wanted to stop back to this video and say thank you! I ordered all the same stuff off your links, and wired everything exactly as you did (on my 2020 Ram). Turned out awesome!

@WaterFowler41 3 года назад

That’s great to hear!! Awesome man!

@losmarcon 3 года назад

Among all videos I watched to do this project, yours take the cake, thanks great video.

@WaterFowler41 3 года назад

Awesome, glad it helped!

@mc1339ful 2 года назад

Great video with clear direction, appreciate you sharing

@fxzzurita4220 10 месяцев назад

Thank you sir! Installed the same set up. Looks great!

@jccorder1 2 года назад

Nice video. Hope to do this on my new truck when the weather gets better

@bobert5785 3 года назад

Nicely done.

@mikescioli6691 3 года назад

Absolutely wonderful video. I wanted to pull power from somewhere other than the battery/ I thought maybe the tail lights had a constant "hot" wire but couldn't find one. You provided the perfect solution. I didn't know there was a constant hot wire to the trailer harness. Thanks alot!

@kottmeier 3 года назад

Looks really good, well done!

@WaterFowler41 3 года назад

Thanks!!

@sebrofc 2 года назад

11:15 sums up my sentiment as well, this kills me that they run wire and space for nearly every feature anyhow, so much easier to do it at build but whatever. Thanks for this great share.

@SultanofSpey 3 года назад

Nice work man.

@WaterFowler41 3 года назад

Thank you sir!

@mbar3336 Год назад

Thanks for the links.

@WaterFowler41 Год назад

No problem!

@blackrhar 3 года назад

Greatly helpful homie

@WaterFowler41 3 года назад

Awesome! Good to hear!

@jimmyr1683 2 года назад

I love tight applications!

@steveheisel818 2 года назад

I finally got around to installing these lights (weather was either too cold or too hot). I should have done it 9 months ago when I bought all of the parts. I have a folding tonneau cover and what a difference it makes over the small light that came with the cover. It was incredibly easy after watching your video. It answered all of the questions I had before taking on this project.

@tsteinour Год назад

Hey I have a question and I know its a dumb question. I am usually not this incompetent but I am having brain issues with this. When you installed the lights you ran the black wires from the lights down the channel on both sides? Did you have to add wire to those that cane with lights? Also after you tapped into wire on harness and added fuse wire is that when you run the power from fuse up the channel to the switch and then another down to tap the power and the 2 wires from the lights ? Sorry if it's confusing it's been so long ago since I have ran wires and other things in vehicles. Thanks for any info

@steveheisel818 Год назад

@@tsteinour I ran the black light wires down the channel on each side. I connected the positive side of the lights to one side of the switch under the truck close to where I tapped the power. The switch wires were run in the same wire loom as one of the light wires. I do not recall if the light wires were long enough (it was over a year ago). The negative side of each light was attached to a grounded bolt under the truck. The other wire from the switch was attached to the fuse, and the fuse to the power. I hope I cleared things up and didn't make it more confusing.

@tsteinour Год назад

@Steve Heisel yes ty. If I'm correct I believe I need red wire for the actual switch to run down below I got the same switch he used and it has like 6 inches of wire comming out 2 sides. Thanks for the info.

@starmc26 3 года назад

It's smart to also add a diode, so any issues with your bedlighting or wiring doesn't affect the trailer harness power.

@royj9241 2 года назад

Will this power tap affect my RV trailer lights?

@retroreesekc 3 года назад

Do you have a drawing you can supply on how the wiring goes. I know you showed us but a little pic would be awesome. Thanks

@WaterFowler41 3 года назад

Check out the video description I added a quick drawing.

@arthurpirozzi6565 6 месяцев назад

Thank you for your great video. You've convinced me to avoid the RAM OEM bed lights and to use your solution. Questions: the fuse product says they give you 40amp fuses. That is really high amperage. Do you know what the draw is from the lights? Can't be much. I would consider using a much lower amperage fuse. what can you tell us. Thanks again Art

@WaterFowler41 6 месяцев назад

5 amp is more than sufficient

@Jesus-zk3ze 2 месяца назад

I followed every step , and the lights look awesome while they are on … the only problem i had is that tye fuse blows up as soon as i turn the switch to OFF mode..? If i have the switch in ON the lights turn on as soon as i install the fuse and if the Switch is in OFF mode the fuse blows up immediately… i am running a 30 amp fuse what did i do wrong?

@hadenough9495 10 дней назад

How would I wire it to the stock bed lights?

@kpeteet 3 года назад

Did you disconnect you battery before connecting to the trailer wiring harness.

@WaterFowler41 3 года назад

Nope it was a hot tap

@tomm8739 Год назад

Can you use the lights and a trailer connected at the same time.

@WaterFowler41 Год назад

Yes

@sirAval0n 3 года назад

Does this trailer hitch power is always on? What happens if You forget to switch the bed light? Will it finally drain Your battery?

@WaterFowler41 3 года назад

It’ll take a long time for LEDs to drain the battery. It’s just life leaving your map light on.

@chrisnordstrom-4689 Год назад

I see that in-line fuse you add described is 40 amp with 10 gauge wire. Is that the right size? I think too big. Thanks for posting the viseo

@WaterFowler41 Год назад

You can probably get away with a smaller fuse for the lights. Also a lot of times Amazon links change so my original one may have been a smaller more suitable fuse but the seller might have updated things.

@cannon2695 3 года назад

I went to tap into my trailer plug harness but all I could get was power from a gray wire that has power when I turn the key or use the fob. The red wire had no power at all. Is there something that needs to be connected under the hood first for the wire to have constant power? Thanks

@WaterFowler41 3 года назад

I would check and see if the trailer circuits have power. In my old f150 I had to add a fuse in the fuse panel under the hood to energize the trailer harness.

@cannon2695 3 года назад

@@WaterFowler41 Thanks for the reply. I did check the fuse and I cannot tell if that fuse is blown or not. Looking at a diagram and it looks like I may have tapped the tail light/parking light wire. I will try to replace the fuse tomorrow and see if anything changes.

@cannon2695 3 года назад

@@WaterFowler41 Update: I got under there the next day and all of a sudden I had power to the green and red wire at the trailer plug so maybe unseating and reinserting the fuse did something. Posi tapped that wire with a fuse and led lights are working with a switch like a champ. Thanks for the input and video!

@charlesromstadt5308 2 года назад

So the negative wires are just grounded to the truck bed?

@WaterFowler41 2 года назад

No they are grounded to a bolt on the chassis.

@stephenmoloney2708 3 года назад

Great video. what size wire for that fuse did you use and do you have a link for it. I purchased the lights and switch but want to make sure i buy right fuse adapter.

@WaterFowler41 3 года назад

I used 14 gauge trailer wire

@shadaelbullocks77 3 года назад

@@WaterFowler41 Love your videos man. Quick question(s) before I pull the trigger on buying these parts. I keep seeing mention of fuse. How do the 2 separate light kits connect to the 1 plug. Is that with the additional 14 gauge wire? Where does the fuse fit in regards to the trailer harness connection? I dont see a link for that specifically in the list of parts. Many thanks!

@WaterFowler41 3 года назад

After the fuse I split the power to serve each side of the bed lights.

@shadaelbullocks77 3 года назад

@@WaterFowler41 is the fuse something already part of the harness or something separate I need to buy. Thanks for fast response! Just watched your video on the kooks cat back which interests me cause I don’t want to cut anything lol

@WaterFowler41 3 года назад

@@shadaelbullocks77 you need to buy it separately

@SongsBuildABit 3 года назад

Sorry I may have a stupid question. How do you create the electric circuit? Power out from the trail harness (red line), go to a 5 amp fuse, and then the switch, and then 1 led light strap, and then the 2nd led light strap, and then connect to a ground point, right? So these 2 led strap are in series circuit not parallel? And the circuit ended at a ground point but not back to the trail harness? Thank you very much.

@SongsBuildABit 3 года назад

Seems I am kind of understand. The ground point on a car is not truly connected to the ground but connected to the car battery negative. That's how it forms a circuit.

@WaterFowler41 3 года назад

The power feed runs from my trailer harness, through a fuse then it splits to each side of my bed to feed the led strips. The strips are in parallel. Each led strip has a found wire that I ran to a frame bolt under the truck.

@SongsBuildABit 3 года назад

@@WaterFowler41 Thank you very much!

@nykbob 3 года назад

Then in this explanation the switch is placed between the fuse and the split to the two LED strips. Is this correct?

@michaelesposito1372 2 года назад

Sorry not very familiar with wiring. What type of wire did you use to extend the power and ground wires off the LEDs?

@WaterFowler41 2 года назад

I use 14 gauge wire. You can get rolls of it from Menards.

@OneWD_CR 2 года назад

Still run these 1+ years later? Saw you had to take them down after/during install of the new bed cover... interested in your "long term review" of this setup. OEM bedlights are a hassle to install and don't provide relevant amounts of light anyway, looking for better solution and this looks good when they're on, wonder if you still like them.

@WaterFowler41 2 года назад

Yup just reinstalled them on my new tonneau cover rails

@OneWD_CR 2 года назад

@@WaterFowler41 Cool, I'm thinking I might add a magnetic switch into the mix, but otherwise think I'm going to do exactly this setup. Thanks!

@chasecampbell460 7 месяцев назад

@@WaterFowler41 Did you ever do the magnetic switch? I've got BedRug, so can probably hook up either. About to do this whole setup to my 2023 Ram 1500. Man this looks fun. Thanks. Longevity of the lights good? @waterfowler41

@coryorgan4775 3 года назад

I guess I am still cornfused... Im not an electrical person. I have read the other comments, but still need help lol. Ok, so you have posi-tapped the red wire going too the trailer harness to the fuse holder. The other side of that fuse holder goes to the switch correct? I am cornfused what to do with the lights power. I am guessing extend those connections and connect together some how to the other side of the switch?

@WaterFowler41 3 года назад

I just added a wiring diagram to the video description. That shows how the fuse and switch are wired to the lights.

@coryorgan4775 3 года назад

@@WaterFowler41 Too easy. Thanks so much. Just over analyze things as usual lol.

@WaterFowler41 3 года назад

Yeah don’t overthink it!

@armandobautista8275 2 года назад

where can I buy this light kit?

@WaterFowler41 2 года назад

Links in the description

@yunusbuffins5729 3 года назад

Am I the only one wondering why there are dislikes on this video?!?!?

@peterbarlow8912 7 дней назад

Those won’t tie down a bundle of 2x’s. The eyes down near the floor are the most useful anchors. Straps run nearly horizontal don’t hold down much. The steeper the strap angle the more downforce

@WaterFowler41 7 дней назад

This is a truck bed lighting video.

@peterbarlow8912 6 дней назад

@@WaterFowler41 sorry looks like my feed jumped to the next unselected video and my comment ended up under yours. I just carry led flashlights. My 8 foot bed is all about cargo utility.