Budget Gaming PC - Lenovo M93p Case Swap and Upgrade

Подписаться 4,5 тыс.

Просмотров 3,8 тыс.

50% 1

My refurbished Laptops and PC's for sale:
eBay: www.ebay.ca/usr/haiste_comput...
Kijiji: www.kijiji.ca/o-profile/51588...
I migrated the innards of a Lenovo ThinkCentre M93p SFF Desktop to a larger tower case with upgrades.
Upgrades:
Cooler Master MasterBox Q300L + Case Fans
NVIDIA Quadro 4000 2GB DDR5 GPU
16GB SK Hynix DDR3 1333MHz RAM
Allied 500W PSU
1 x 128GB Samsung PM871 SSD
1 x 256GB SanDisk SSD Plus SSD
Cable Adapters:
USB 3.0 to 2.0 Header
www.amazon.ca/gp/product/B072...
24 pin to 14 pin power plug:
www.amazon.ca/gp/product/B07F...
NVIDIA Quadro 4000:
www.techpowerup.com/gpu-specs...
Cooler Master PC Case:
www.amazon.ca/gp/product/B078...
www.haisterepair.com
0:00 Intro
1:15 PC Case + Fans
3:57 GPU
5:42 CPU
6:23 RAM
6:55 SSD
7:45 Power cable pins
8:13 speaker
8:40 Front Audio fail
10:22 USB 3.0 to 2.0
10:54 Rear I/O
11:08 USB 3.0 Adapter
11:26 24 to 14 pin adapter
12:02 PSU
13:25 Rear I/O again
14:42 Thermal Sensor
18:18 Cover back on
18:38 Heaven Benchmark
19:35 Gaming
22:30 HW Monitor & Final Thoughts

Наука

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@ted-b 2 года назад

Makes for a nice little system for not a lot of money, nice one!

@HaisteComputerRepair 2 года назад

For sure! This was around $365 CAD total. Could have been done cheaper, but it really depends on what is available.

@vonwolfeo 2 года назад

I have a super similar m93p setup myself, works amazingly for my work PC. I've got a HD 7770 in it at the moment and an i5 4670. Honestly I'd highly recommend these machines to anyone with a tight budget. They're super capable machines, I can do all my design and editing work with ease.

@HaisteComputerRepair 2 года назад

Nice, that is pretty similar, perhaps slightly better even. I am doing two more with some GTX 750ti GPU's and one with a GT 1050 low profile and i7. I sell them refurbished if I have them and recommend them as well!

@vonwolfeo 2 года назад

@@HaisteComputerRepair They'd be little beast. Question, have you ever put an AIO into one of these machines, let alone seen anyone do it? I had one spare on sitting in my office and was considering throwing it in for fun but those proprietary USB headers stopped me.

@HaisteComputerRepair 2 года назад

@@vonwolfeo Do you mean a water cooler? You could totally do it, it just won't be controlled or monitored via BIOS like other motherboards. Maybe there is a piece of software you can run for that. You could use a SATA powered fan hub/molex combination to power everything. Should definitely upgrade the PSU if you go that route. I don't see what could get in the way. There is a little guide here I referenced once. I should note I haven't installed a water cooled system into a M93p before: landing.coolermaster.com/faq/liquid-cooling-where-do-i-connect-the-fans-and-pump/

@vonwolfeo 2 года назад

@@HaisteComputerRepair Ah yeah, sorry watercooler. Interesting, that totally makes sense though. That's a handy resource, cheers. I've already got an aftermarket air cooler so it's probably not worth my time haha. But it'd be cool to see nonetheless, I'd love to see a stupidly maxed out ThinkCentre, RTX ThinkCentre? haha

@HaisteComputerRepair 2 года назад

@@vonwolfeo I would love to see that too! Maybe I'll be able to build one if I'm lucky.

@yeahbuddytime2158 2 года назад

Is it possible to run rgb fans with this build? And still control fan speed?

@HaisteComputerRepair 2 года назад

You can run RBG fans if you get a Power Supply with Molex connections and some RGB fans with Molex connections. For speed control, you would have to buy a Controller, which you would probably need 3-pin fan cable extensions for. So, I believe it can be done with quite the network of cables. However, with the cheaper RGB fans I buy (UpHere on Amazon), I am unsure if you can control speed very effectively. But, they are good for cooling and don't make a lot of noise.

@Ozqu 2 года назад

Hey if youre still wondering why your fan was spinning at full speed when plugged into the pwr_fan pins, its meant for psu fan

@HaisteComputerRepair 2 года назад

I was low key wondering about that. Thanks! I'm wondering how that would work being that the fan in the PSU plugs into the power supply board.

@Ozqu 2 года назад

@@HaisteComputerRepair Some psu allow you to monitor your fan speed when plugged into that

@HaisteComputerRepair 2 года назад

@@Ozqu Monitor fan speed from PSU? I don't think that is an option with the ThinkCentre series motherboards, but I could be wrong. Have you done this with a ThinkCentre or are you referring to other boards where you can set fan profiles in BIOS/UEFI Utilities?

@Ozqu 2 года назад

@@HaisteComputerRepair I just case swapped a m81sff its very similiar to the pc in this video. Some very old power supplies fans had to be connected to the mobo, thats why the pwr_fan header is a thing. And its giving 12V all times because its meant to be used for a psu fan, thats why your fans were spinning at full speed. You can also use the header to power the pump for aio cooler

@HaisteComputerRepair 2 года назад

@@Ozqu Ok, well thanks for the information that is good to know. However, on the M93p motherboard the header is labeled "AUX1_Fan." Any difference that you know of?

@elfedorausado 2 года назад

The lens focusing sounds like a dot matrix printer (lol)

@HaisteComputerRepair 2 года назад

Maybe I have one running behind the camera ;)

@elfedorausado 2 года назад

@@HaisteComputerRepair I do have one back in storage, btw... need to test if it's still operational.

@HaisteComputerRepair 2 года назад

@@elfedorausado Get on it and print some sweet banners.

@elfedorausado 2 года назад

@@HaisteComputerRepair gotta build a rig with serial port first, to test the printer. Got some old MoBos lying around...

@HaisteComputerRepair 2 года назад

@@elfedorausado Well, if you ever do it let me know how it goes!

@curvingfyre6810 8 месяцев назад

good old lenovo, by far the least egregiously proprietary of the big 3 office pc distributors.

@HaisteComputerRepair 8 месяцев назад

Luckily, people have taken the time to make cable adapters for just about everything you need to swap hardware and cases.

@curvingfyre6810 8 месяцев назад

@@HaisteComputerRepair Not a lot of products liek that exist for lenovos actually - though thats mostly because lenovos have publically available pinouts that can be easily adjusted for on standard headers. Unfortunately, the front sound panel is one that doesn't seem to have a workaround. If it were me, I'd actually standardize external to internal adapters, so any number of proprietary systems could simply have their front panel daughter boards taken out, hidden in the PSU shroud, and adapted back to motherboard headers. But so far no-ones done that in a reliable way.

@HaisteComputerRepair 8 месяцев назад

@@curvingfyre6810There actually are adapters for the front audio connections! www.amazon.ca/ShineBear-Female-Converter-Motherboard-Connection/dp/B07NNTZ8XM?th=1