Budget Interior Transformation! 1992 Chevrolet Silverado! OBS Upgrades!

Подписаться 188 тыс.

Просмотров 618 тыс.

50% 1

After driving this regular cab shortbed for a few months I've identified some issues that need to be resolve. The main thing is the interior is absolutely disgusting! Also the doors rattle and the wind noise is annoying as all get out. I've also wanted to update the exterior mirrors, diagnose the HVAC and address some leaks. I really like this pickup so I hate to part with it but if someone were to fork out $9500 I'd let it go. As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske-repair...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: mortskerepair@gmail.com
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $36 shipped
SS5 0.625" wide long handle $29 shipped
SS5s 0.625" wide short handle $27 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3tTDKwO
Milwaukee 3/8" stubby impact: amzn.to/3DFT2sF
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#obs #interior #mortskerepair #92chevy #chevytruck #silverado #350chevy #tbi #c1500 #farmtruck #rcsb #leaks #radiatorhose #powersteering #rusty #hvac #dailydriver #restoration #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rust #hackmechanic #carpet #diy #headliner #torqthrust #fieldfind #abandonedcar #oilchange #chevrolettrucks #pressurewatch #lowered #seat #v8 #smallblockblockchevrolet #wiring #electrical #fieldfind #junkyardcar #junkyard #junkyarddog #duffdog #a/c #doorlatches #doorhinge #hingepins #dailydriver

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,5 тыс.

@calebscrazymachines9786 2 года назад

A good name for second Chanel would be morts shorts or duff tales or duffs stuff

@MortskeRepair 2 года назад

I like it!

@500K-Tundra 2 года назад

Yes, we like Duff Stuff too or More with Mortske. We enjoy watching your channel and look forward to your new videos.

@thecapturban 2 года назад

🤣🤣🤣Puddin Fab Shop 3🤣🤣🤣

@greywell371 2 года назад

@@thecapturban good but mistake doesn't do Fab work.. 😄😄

@greywell371 2 года назад

@@thecapturban "mortske"

@TanCalHan 2 года назад

Best upgrade you can do for your headlights is add a relay harness so the bulbs get full wattage and it takes a load off the switch

@thisfool260 Год назад

Link? My headlight switch keeps getting hot and eventually fails.

@TanCalHan Год назад

@@thisfool260 google relay harness for whatever headlight bulb your car has

@ManBearPig3 2 года назад

Mortski repair: Saving the shop.

@TSRay-jb9qh 9 месяцев назад

If you ruled out that you do not have a heater core leak I can promise you the source of your wet carpet is from a condensation drain hose under the HVAC system inside that goes through the firewall that over the years can get covered and clogged from accumulating leaves and debris from the cowling. Once it gets clogged the condensation will roll backwards into the passenger side floorboard underneath the carpet which if not discovered early enough will end up soaking into the soundproofing causing mold and moldy smell. Which is usually the first indication unless someone happens to feel the super soaked carpet, unrecognized and if it doesn't get dealt with right away it will definitely eventually rust out the floorboard. To clear the drain hose out it's not good enough just to try to do it from under the hood you have to be patient take some time and remove the blower fan and take a shop vac with a flexible hose and get in there and vacuum out all the leaves and debris, then flush out it out with some soapy water and degreaser from the inside out through the firewall until it runs clear then take your leaf blower and blow all the water out until it's dry and then replace your blower fan. The little tiny rubber hose is very hard to see it's just below the AC dryer canister under the hood in the very bottom and goes through the firewall.

@Multi-Skill-Bill 2 года назад

Duffs Daily Doodads is a vote from me :). As for the headlights, I love LED as long as you get the right ones for your application. The bright white is just better on the old eyeballs.

@rsprockets7846 2 года назад

tru dat

@larryshumakerhihvv5294 2 года назад

Do Duff channel

@rsprockets7846 2 года назад

@@larryshumakerhihvv5294 duffys TAILS

@nancykitzinger3078 2 года назад

Perfect upgrade! I actually have used carpet dye in one of the cars I had. 1995 S10 Blazer 2 door. It had light grey carpet that was stained. The dye worked really well so I knew what you did would work!

@geesss8675 2 года назад

So. . . when you dyed the carpets did it match the seats and visors.

@nancykitzinger3078 2 года назад

@@geesss8675 From what I remember yes everything looked pretty good.

@rodneyhughey 2 года назад

I upgraded the headlights in my 99 Tahoe and used the 3M buffing kit to bring the lenses back to clear. Living in Alaska, Moose collisions are common and these $70 headlight lamps make a tremendous difference.

@dougmcgee30 2 года назад

One of the best upgrades I did to my obs was the headlight relay upgrade. With it the low beams stayed on with the high beams, plus it took the load off of the switch.

@unknownsoul13 2 года назад

Did that with a 68 Mercury Comet, I could actually drive safely at night afterwards.

@dyer2cycle 2 года назад

..that sounds like a good idea..how do you do that, and how complicated is it to do?..and how much modification to the wiring do you have to do?....

@dougmcgee30 2 года назад

@@dyer2cycle I bought a kit from Lmc and followed the instructions.

@Idkijustlike2useYoutube 7 месяцев назад

@@dougmcgee30what does it mean to take a load of the switch? what switch? like the actual headlight switch on the left side of the steering wheel?

@somerandomguy3868 2 года назад

You did the right thing replacing the headlights, the 3M kit is amazing and I'm sure you could have brought those old ones around but you still did the right thing

@jperrod1979 2 года назад

The problem with polishing up and or clearing the upper headlights is you can still see the yellow of the glue and the UV fading around the edges and on the inside. I just did this and the reflector bowl Chrome also was coming off. You can get away with sanding and clearing the lower lenses.

@stevenlatham4397 2 года назад

I respect how hard you work to keep this channel awesome, and still work 40-43.5 hours a week, but now you want to start another... You have a loyal fan base, so hopefully the second channel takes off quickly.

@MortskeRepair 2 года назад

Challenge accepted

@evanthompson3727 2 года назад

I like the videos where you revisit familiar projects. I like will it runs too, but seeing the improvements makes it extra cool.

@DiggingForHealth 2 года назад

"Duff N' Stuff" for the new channel! I watch your channel every week with my husband and I have been calling you Duff N Stuff this entire time anyway. 🤣💕

@cooperhall2793 2 года назад

I'm sure it's mentioned somewhere else in the 2900+ existing comments, but the column shifter has a return spring in it that was used in just about every column-shifted GM vehicle made from about the mid 80s - mid 90s. They are mounted inside the column against the shifter and often break. I just had to put a replacement in my 1994 G20 van. Pop out the pin that holds in the shifter lever and it's right there. Can be removed with a pick. No column removal or disassembly needed. Like $10 on ebay for a new one, or pennies on the dollar at your local salvage yard. I took mine from an early 90s Buick something-or-other. Kind of annoying to put in, but not too bad and worth it.

@MortskeRepair 2 года назад

Thanks for the info!

@erikrunas226 2 года назад

Thank you for making these project type videos. This format is more in line with what I have done.

@AddieDirectsTV 2 года назад

Should be something like Duff Dog’s Garage. Since we know who REALLY owns the shop 😜

@Rick-ir6rv 2 года назад

The leftover headliner materiel looks to be a perfect match for covering for the cracked dash.

@Paleoman52 2 года назад

A good name for your other channel could be "More Mortske Mania" I enjoyed this video, and learned a few things. I also drive a Silverado. Did that truck go through a hailstorm? Lots of dents on the hood.

@MortskeRepair 2 года назад

Most likely

@1980bwc 2 года назад

A 94-98 grille would really improve the appearance Bud. I have always been amazed just how much a simple grille change classed up the looks of the whole truck between 93 and 94.

@MortskeRepair 2 года назад

I agree

@michaelforeman4089 2 года назад

I just changed out my 91 grille to a blacked out 94 style Looks much better Not as easy though as just swapping the grille. The filler between the grille and the bumper has to be changed as well You also need to have the parking/turn signal lights for the 94 and newer.

@chriscornelius4549 2 года назад

Looks good

@MortskeRepair 2 года назад

@@michaelforeman4089 Thanks for the info!

@dyer2cycle 2 года назад

I agree..the '94-'98 grill looks better than the '88-'93 in the Chevy..on the GMC, however, I think the opposite is true..the '88-'93 GMC grill looks better than the '94-'98 GMC grill..I have an '89 Chevy, a '90 Chevy, a '91 GMC, and a '98 Suburban, and to me the '91 GMC grill looks much better on the truck than the '89 and '90 Chevy..I also think the original('88-'93) Chevy grill was designed to be used with the quad sealed beam headlights..I think my '89 with the sealed beams looks better than the '90 with the plastic headlights..IMHO, the one-piece plastic headlights and the '88-'93 grill used together gives it to much of a "flat" appearance...the '98 Suburban has the newer style grill, and it looks better with the plastic headlights..I'm not going to swap any of the grills, though, as I don't like "mix and match" parts swapping between year models..rather leave them the way they were created... :)

@ghettsumm7949 2 года назад

Personally, I would have repaired the passenger's side door hinges first for practice, and then the drivers side, because it gets used a lot more. Great instructional video. Maybe use the leftover headliner material to recover the visors? You could just throw those seat covers in the wash with the rest of your laundry, they'll be fine.

@Blue04Z71 2 года назад

You need the sensor in the front of the donor truck and the pigtail for the rear view mirror for it to work. Very easy to wire up. You can replace that hinge pin roller too. Did it on my 89 Silverado.

@maniacaloffroad5338 2 года назад

Ty! I have a 1998 GMC Sierra z71 fully loaded but the mirror info doesn't have the outdoor temp option. I recently got a mirror that will display the temp from a friend but I wasn't sure what else I'd need to make it work.

@carlosaranda4893 Год назад

I'm in the process of doing the same on mine, if I get the pigtail of the donor car, where should I plug that in? My truck is a 1996 k1500 z71 ext cab. Thank you.

@Blue04Z71 Год назад

@@carlosaranda4893 there is a write up online somewhere. The sensor gets wired into the pigtail and it needs keyed power and a ground if I remember right. It’s been about 10 years since I did it.

@city.motors 2 года назад

I like it when you bring in a project and actually work on it lol not just the will it run and then it's gone hahah

@jacobhosler1982 2 года назад

That's an amazing interior and solid floor, not rotted out is definitely not normal for the states it was in.

@kevinkowaluk5682 2 года назад

Love this truck, some simple fixes/upgrades really work wonders. I put the larger "sport" mirrors on my 94 and I wished I did the little ones, they look so much cleaner!

@astravanmk2 2 года назад

Duff N Stuff! Another marvellous instalment of Monday saving antics. Thanks chaps.

@davecarey7452 2 года назад

A hundred thousand subscribers can't be wrong. Forgot how nice that generation of pickup was. You've turned this one into a sweet ride. I'm thinking, "More Mortske", for the name of a second channel and a third channel expansion could be Much More Mortske.

@stevenboyle6924 2 года назад

Congrats on the (almost) 100k!! Still the best on RU-vid

@mnichols31 2 года назад

I'm glad this truck turned out to be a nice ride, I saw the video where you brought it home and it was looking very promising even then. Looking forward to see it as it progresses. I've seen videos from auto detailers on RU-vid use a drill brush on carpeting and seats, not sure how they do on older vehicles though. Looking forward to the second channel when you get it launched!

@johncatalano7185 2 года назад

Hey Mortske: It's Duff and That Mechanic Guy!!! If you're to upgrade a P/U, this is the one to restore!!! Try LMC Truck or RockAuto for Chevy P/U parts!!!!!

@dennisgray2975 2 года назад

Love the truck rebirths! Keep 'em coming!

@1963bondo 2 года назад

How about DUFF'S DAILY REPAIR? Seems good 👍 to me. Love the channel

@danoconnor618 2 года назад

You dont need a second channel Mortske, plenty of of fun here on this one . Keep up the great work.

@Bill-xc8le 2 года назад

Hopefully a 100K by the end of the day!

@WatchWesWork 2 года назад

I once spilled a full gallon of bar and chain oil on my truck seat. There's not point even trying to clean that...

@MortskeRepair 2 года назад

You ruined it! Why didn't you put the lid on it?

@tombeauchamp806 2 года назад

Bar and chain is supposed to be undercoating lol

@billthompson7579 2 года назад

I don't know how you can beat Duff Tales

@jacmohr 2 года назад

In terms of led bulbs, make sure you get just the two sided bulbs not the ones that are little leds all the way around cause those don’t have a beam pattern. I’ve had good luck with fahren brand since you can get a hi/low beam kit for about $70.

@bass29595 Год назад

I personally like hikari eye of megatron bulbs haven't tried many leds but these are well beyond bright enough a little pricey though

@wolfc7280 2 года назад

I've never been a fan of the instrument panels and controls on those years of trucks.

@Phil222425 2 года назад

2nd channel name - "Sammich Time", Love the truck - put the small mirrors on.......

@JDLarge 2 года назад

How about “Mortske’s Maintenance,” or “Fixin stuff with Duff.” Either way I’ll be tuning in!

@jperrod1979 2 года назад

Hey! You can actually pull the upper headlights out without removing the grill if you undo those pins on top with a 5.5 mm socket... You only have to remove the grill if you're replacing the entire backing plate but I read somewhere not to use the dorman ones and to just reuse the GM ones with the new dorman lenses

@MortskeRepair 2 года назад

Thanks for the tip!

@grantkoeller8911 2 года назад

The name of your other channel should be called "Duffs World".

@kingjay239 2 года назад

I have a 2002 GMC Yukon Denali that had regular halogen headlights. I hated them so much, especially driving at night. I could barely see anything with them. Sometimes I'd be scared to drive at night. Especially in areas where there wasn't many street lights to light up my way. So eventually I purchased some "inexpensive" LED bulbs & put them in. So far I love them, they work & look amazing. They also made the truck look "more modern". Thankfully the Denali variant of the Yukon comes with Projector headlight housings from the factory, so LEDs & HIDs work perfectly in them. Where as with vehicles that have regular reflector housings that scatter the lights & blind oncoming traffic. It's extremely annoying. But anyway, before I purchased those LED lights I was debating on LEDs or HIDs. But I've always had bad experiences with HIDs. Having to deal with an annoying ballast or modifying something is not my forte lol. I just wanted something that was "plug & play" & i found LEDs to be perfect. also the color that I got imo was the best output option. They're not blue to the point that they start looking like purple (I find those lights useless because they look so dim imo) but they're far from looking "yellow" I find that yellowish light output color to look archaic. I think the color I chose looks more modern & luxurious. I see that color on more expensive vehicles. For example if you notice the color that the new Toyota Corollas have, they're way to blue. They almost start to look purple in certain angles lol. No hate, but that's just not my taste. Also like I said, thankfully the Denali comes with Projector headlights from the factory so I didn't have to mess with the actual housing, because I do not like aftermarket headlights either. Some look ugly af. Same thing with tail lights. I've seen some really ugly LED tail lights. I upgraded my truck to some LED tail lights that look more factory-ish & I really like them. They're all red & have a red LED light bar running through them sort of like the newer model GM trucks. Before it had some aftermarket taillights that were see through plastic. I guess it was trying to look like the 2007-2014 GMC Denali (which looks good on those models) but I just didn't like them on my year model. That was all the craze back in the early 2000s to like late 2010 lol. Everyone wanted to have those see through taillights. Some companies even started putting them on their cars for example the Nissan Altimas have those See through tail lights. The Lexus IS models also used those type of tail lights. Thankfully that trend died out lol. I never really liked it tbh

@KotheJ1 2 года назад

Second channel, “Adventures of Sir Mortkus and Duff”. That would give Pudding a good laugh. Love the content and the shared knowledge.

@jasonlovesanythingcars3579 2 года назад

Wet floor on drivers side. At all times the vehicle is driven the driver can can wet boots. Snow covered boots. Muddy boots. The about of time that there are passengers is different from family to family, car to car. But there is always some wet feet on the drivers side. Hope that helps. Love your channel man. From all the way from St.John’s, Newfoundland, Canada. Peace brother!!!!

@MadRattGarage 2 года назад

Another option for that carpet that I do to all my vehicles is Tuff Stuff upholstery cleaner and a round brush attachment for your drill. Soak it with the Tuff stuff for 10 mins or so then use the drill brush and 9 out of 10 times any drink based and even some grease based stains go away. Then after the carpet is dry and stiff feeling run that drill brush one more time and the carpet softens up almost like when new. all in all it only takes an extra 15-20 mins over what you did. Just a different option I do. works for me for what it's worth. Like the channel keep up the good content.

@MortskeRepair 2 года назад

Thanks for the tip

@kennethtibbitts414 2 года назад

'"OTHER STUFF WITH DUFF" is a great name for the second channel

@wasteddaze6281 2 года назад

Mortske Repair: The Extra Treats No need to vote, you know that shit is the best ever. I am the greatest, thank you all!

@jamesragus1577 2 года назад

Just watched this upload today, name the 2nd channel containing behind the scenes material...... "Mortske's Behind". Not expecting to win this one with that title, but it was the first thing that came to mind.... Love the channel, gettin inspired to find a project!

@MortskeRepair 2 года назад

Thanks much

@tacoman2064 Месяц назад

I had to take apart my power steering box and replace the seals in it and it fixed it for me I’ve put about a thousand miles on it since hasn’t leaked a drip

@MortskeRepair Месяц назад

Cool

@dakotamcneely5779 Год назад

I had a 90 GMc 2wd just like this when a whippr snapper. C notched it too. When I did my door pins I did the door main latch stud on back and it kept door from rattling. Keep it up, enjoyed the video.

@larryoren5928 2 года назад

For your head lights, to clear them up, wet sand them with find sand paper, let them dry, then spray clear them with glossy clear spray. I had the same problem. It works!

@dyer2cycle 2 года назад

..or switch them over to the glass '88-'89 sealed beams..no more cloudy/yellowed headlights, ever!..and they are much cheaper to replace when they do burn out....

@ToriL97 2 года назад

I wish I could have bought my grandpa's 91 k1500. So many memories with my grandparents when I was little. My uncle sold it or junked it a few years ago, it was pretty crusty and rusty since my uncle doesn't ever seem to wash his vehicles. Would have liked to fix it up but one day I'll find one like it. Basically the same as this one in your video, but long bed and roll up windows.

@Lukealang 7 месяцев назад

I bought glass headlights for mine and put in good quality led headlights. Its as nice to drive at night as a 2016 you can see real good.

@MortskeRepair 7 месяцев назад

Very nice!

@michaeldufresne9280 2 года назад

I like that old Pott County pick up. Nice job Mortske. Carry on

@handyhippie6548 2 года назад

last week, i traded the grill, headlights, marker lights, side lights, sport mirrors, front bumper, and an expanded steel mesh tailgate with a fifth wheel dip, off of my '94 1500 silverado, for a '98 s10 with a blown engine and a t-5 tranny, as a frame to sit under my '36 chevy truck cab, to a kid who hit a deer with his '93 1500 base model. the frame and 4x4 drive line from the '94 is going under a '54 chevy 5 window truck cab, so to me, the parts were basically just junk i had to get rid of. sometimes the universe just lines up and smiles down on a feller. edit; my interior is dark blue and for an extended cab, but you can paint the plastic to match yours if it would fit. the truck is a tiara motor coach conversion, and has some solid oak face plates on the dash, and door panels, and has an oak ceiling storage cubby with custom rope lights behind plastic panels, with a factory installed radar detector from '94 mounted in the switch panel. it has good vinyl sun visors, and the front 60/40 reclining back leather seat has the tmc logo stitched into the headrests and has a flip down center arm rest/back rest. the driver's side seat cushion has some issues, but is pretty still pretty comfy. they're yours if you pay the shipping, or you can take a roady to northern indiana and pick it all up. if you're interested i can email you some pics. the frame and suspension, engine and drive line, fuel system, brake system, radiator, heater box and controls, pedal assembly, steering column, and wiring harness are the only parts i wanna keep. basically, all of the bits to turn the '54 cab into a real truck. i even have a pallet of brand new rubber bed mats, and i'll throw in couple as a bonus.

@chrisperez8092 2 года назад

I love this truck!!!! Honestly, put clear headlights and led plug and play bulbs, turns night into well, a bit less night. The new channel needs a mower man compilation, please. Congratulations on the 100k subscribers!!!! You deserve it!!! And 100k more!!!

@MortskeRepair 2 года назад

Thanks for the tips!

@duaneporter4322 2 года назад

Happy hour with Mortske

@Luminous.Dynamics 9 месяцев назад

Love the rim and tire size on this pick up. I used to run 22"x9" rims on my '88 Silverado but I got tired of the look very quickly and went back down to 15" and Cooper Cobras.

@ScullyBrewing 5 месяцев назад

I got LEDs for my 99 k1500, drained the battery overnight and they looked dumb with the OBS. Swapped them for the exact kit you got and it fits so much better with the styling of the truck and they shine just fine. Only issue was the plastic clips breaking off when i removed the grill. So much brittle plastic on those OBS

@MortskeRepair 5 месяцев назад

Awesome

@50TBRD Год назад

Reminds me so much of my 1500 when I got it. All the same things I had to do including the headliner. I used the extra material to sew up new sun visors.

@mrgoodbar216 2 года назад

Led lights are the new craze and they arent too expensive. Definitely the best option these days

@kingjay239 2 года назад

I agree, I put in some "cheap" LED lights in my 2002 GMC Yukon Denali & They look & work great! Before I put in the LEDs it had regular Halogen lights & I could barely see at night. The street lights were a lot brighter that my headlights lol. It was pretty bad. Thankfully the LED lights improved my vision at night & even during rainy nights. Thankfully the Denali comes with factory "Projector headlight housings" so the LED lights aren't just being scattered & or blinding oncoming traffic. I see so many other vehicles with regular halogen reflector housings with LEDs or HIDs in them so when they're close to passing me head on the lights blind the heck out of me. It almost appears like they have their high beams on, but it's just their regular low beams. It's extremely annoying. Even worse when they have those bright ass light bars. Sometimes I feel like purposely crashing into them head on just to let them know that they're blinding the heck out of me lol, just jokinnnnngg. Also, I love the color that they put out. It's not really blue, but it's far from being that ugly yellow color that older cars have. Imo the color that I got is perfect. Looks pretty modern & improves night vision. I've had lights where they were useless because they were way too blue so the light output wasn't great at all. & then I had some where they looked extremely yellow, to the point that they looked old. Idk how to explain it. But anyway, when it comes to HIDs vs LEDs vs Regular Halogen lights. So far I've had the best experience with LEDs. & I've tried expensive HIDs. I find HIDs to be unreliable at times, also sometimes they aren't plug & play. You have to modify something & dealing with a "ballast" finding a good/safe place to put them where they wont move around or heat up to much. It was just annoying for me. The LEDs that I got were just Plug & Play. They worked right out the box. So far haven't had any issues with them (knock on wood lol)

@ronniemaluginSweetwaterfarm 2 года назад

They are 100% brighter. Led's I mean. I put some on my 2005 Avalanche. It makes a huge difference

@busterturner8702 2 года назад

I dig your show man. You and Puddin and vice grip garage. My favorite. Duff for president, no opposable thumbs you know.

@kzbuster 2 года назад

Mor Mortske Repair. Mortske Repair Plus. Mortske Plus 'no thumbs 'Duff. Do the sunvisors with the headliner material. Rust and crappy paint is okay but, a nice, clean interior is a must.

@darrelkinney9856 2 года назад

Looking good for a OBS truck . I have an 89 with glass headlights I used factory stainless mirrors. Had a guy do the interior for a grand. Cheaper than I could buy from a truck book. Duff,s day at the garage.

@patrickmoodabe9728 2 года назад

Woohoo!! A sequel!! Fingers crossed for a trilogy (sorry Duff) 🤦‍♂️🤦‍♂️🤦‍♂️

@a.hammack3823 2 года назад

The name for your new channel should be “Duff’s Extra Stuff“. Yeah, that’s the ticket! Just kinda came to me. Thanks for all the details in your show.

@mjh5444 2 года назад

I like silverstar sylvania they are honestly worth the money. I wear single vision lenses and have astigmatism. It’s much easier for me to see at night with the better bulbs.

@michaelcuff5780 2 года назад

Im not a fan of lowering trucks but it sure is interesting to see how to do it. Love watching and learning. 62 yr old man! Lol!

@joevitous7877 2 года назад

Mortske Maintenance would be a good name for the second channel

@garypease7414 Год назад

2nd channel name, " Do it! Or don't..." On the ac control, try changing out the relays for new ones. There's 3 of them. It worked on mine. On the shifter arm, check the pin to see if it or the arm are wallowed out. Quick change out of either.

@darylpendley 2 года назад

much brighter, and some whiter I use Sylvania Xtravision headlight bulbs the SilverStar might be too bright.

@richardbrady2818 9 месяцев назад

Mortske After Dark

@melissaanthony9211 2 года назад

Duff Dog repair. Love the vintage milk jug in the back with cover.

@ronniemaluginSweetwaterfarm 2 года назад

Duff's & Mortske's restoration would be an awesome name for the second channel

@Speed04GT Год назад

Tech tip lol. Magic eraser pads work wonders on cleaning up plastic trim pieces. I know I’m a day late and a dollar short but I thought I’d throw it out there. Keep up the amazing work and tell Mortske he does pretty good work too 😜😃.

@HFG 2 года назад

Looks like a great summer cruiser

@matthildebrand5717 2 года назад

All that is missing now is a nice 2 inch cowl hood.. sharp lookin truck!

@JohnKaiser-lz2gl Год назад

Love this truck! Thoroughly enjoyed both videos, my favorite pickup! Thanx for the entertainment!

@jasonspringett5367 2 года назад

Extra junkyard stuff with mortske and Duff, come join us for all that crazy mullet no brake doughnut stuff..... Hahahahah.. great channel name and everything explaind... lol.. worth a shot.

@Romo69 3 месяца назад

The heating element and blower fan in those trucks are notorious for leaking. Plastic floor mats and whip them up when you use the AC

@craigstreetzel7743 Год назад

Wind noise is the same spot on your windshield that is causing the wet drivers side floor 🕯 with windows up and see where the wind is coming from

@nocochris8739 2 года назад

The Adventures of Mortske and Duff

@donaldbehr1873 Год назад

They make cup holders that come from the factory that hang on the lower dash and use 2 screws under dash to hold it on and it folds up when not in use.

@alexharris5214 2 года назад

Mortske's Playground. Love the channel, and the Chevy. Thanks for all the good content.

@petestevens7876 2 года назад

You can call it "Shenanigans with Mort and Duff" love that truck though reminds me of the one I had in college.

@canadianwrench 2 года назад

Great transformation! Drain plug gasket - the rubber and steel DPGs were used at the dealer in the 80/90s.

@MortskeRepair 2 года назад

Thanks for the info!

@davidbryant5875 2 года назад

Congratulations on the 100k subscribers!! Watch you every Monday

@tandjperformancesouthflorida 2 года назад

love the obs build..i live in florida and buy and sell obs trucks..you can get a new dash from lmc for that year truck,,cheaper alternative is a dashskin cover ..they work great ..have installed a bunch of them..dashskin is the better of the two offered..dashskin and coverlay..ive installed both and dashskin is the better product..as far as the visors..ive stripped them down and reglued the layers together and used books to keep them pressed together,,let them dry and then recover them..works great..if you were closer to south florida ..ive got all the parts you need..lol..love the channel your a true old school mechanic..

@jeremygould3317 2 года назад

Pins won’t fall out I never had those clips when I worked for a Chevy dealer. Love the content you put out I Learn something every video keep up the great work

@MortskeRepair 2 года назад

Thanks much

@johnbrunson1087 2 года назад

Low buck interior cleaner, a little bit of “westley’s bleche-wite “ white wall cleaner and hot water. Apply with a wheel brush on that big blood stain on the passenger side of your seat. It should clean it right up. Rinse thoroughly.

@timothyargento8457 2 года назад

Mortske and duff best buds doing things

@offshore50 Год назад

I can understand you short guys needing the lowered vehicles. A booster seat may help also! Just pulling your chain, good job on the videos

@kenfrazier616 2 года назад

watched Watch Wes Work, darn he needs to get out and relax to bring his chipper laugh back, winter blues has him down, hey anyone awesome clean up on the doors. Had a 1988 and had o replace the hinges with etal it was fun but end result awesome

@mikeymopar1171 2 года назад

Run your water hose around the windshield and the door jams see if you have any water coming in before you stick the carpets back in

@Eirik_Eiderdrake 2 года назад

Yes there is a spring and a little tapered Teflon bushing for the shifter. I'm going to tell you right now it sucks to try to replace

@MortskeRepair 2 года назад

Thanks for the info

@jonathanz4987 2 года назад

It's cool watching you work on a truck you clearly really like!

@anthonygray3227 2 года назад

I think "Mortsky's Despairs" might be an alright name for the new channel.

@mattsadach5208 2 года назад

Call it duffskes scratch and niff. Love the channel your video lengths are great always stay till the end. No one releasing long enough content like you i dig it keep up the fantastic work.

@MortskeRepair 2 года назад

Thanks much Matt