Budget Jon boat speed and prop test 35HP 14' Jon boat its FAST

Подписаться 714

Просмотров 39 тыс.

50% 1

Budget Jon boat speed and prop test 35HP 14' John boat its FAST
My budget jon boat project series wraps up with this video of the initial test runs. The boat is a cheap 1436 riveted flat bottom which is powered by a 1979 johnson 35hp outboard. I went into this project with a goal of reaching 30mph and being able to run in 6' of water. I am happy with the outcome and had a ton of fun with the project. This may be the last video of the project series but it will not be the last you see of this boat. I will be using it for those fishing trips that require ultra skinny running as well as for river days with the family. Thanks for watching!
Acoustic/Folk Instrumental by Hyde - Free Instrumentals / davidhydemusic
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/acoustic-folk-instrume...
Music promoted by Audio Library • Acoustic Folk Instrume...

Спорт

Опубликовано:

12 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@thejoshfargo Месяц назад

I’ve a got a 1987 25 hp evinrude on a 2018 1436 Alumacraft light jon. It easily hits 32 or 33 but i have gotten it up to 35 a handful of times. No tilt trim no jackplate just trimmed all the way up with a passenger sitting on the back bench with me and 6 gallons of fuel up front! Great video

@CampCatch Месяц назад

This boat was much much faster later on with a modded merc 25. The omc 35 was hurt and let go with a piston failure not long after this video.

@user-qp6ud8un1v 18 дней назад

Friend, l think the other person was right, drop the motor tilt all the way down and lower the jack plate all the way to then you have more motor in the water and the prop will react differently to 😊😊😊

@marysaussy3793 2 года назад

She rips!!! You should be proud of this one! 😘

@DomesticGangsta 2 года назад

Great job with this!

@CampCatch 2 года назад

Thanks!

@jonnun7713 Год назад

Bro! I know this is old!, but man I was right there with you I have a 10 foot with a 20 horse on it and it rips just like that

@dadbeardtv3350 Год назад

this is friggin awesome. I'm def using your template when i start my budget jon boat. Paid $100 for it. Now I just gotta get it ready. i think it's a 75 sears robuck jon boat.

@CampCatch Год назад

Nice! My first boat was a sears sea king 12' with an OMC 9.9. I used to go out to the local spoil islands with my friends when i was about 10 years old. I loved that boat, wish i had it today.

@Laserwurks 2 месяца назад

Love subaru outback for towing my 15.5 jon

@furiousgarage 2 года назад

cuz we need to go fishing in that

@donniegray2288 2 года назад

That prop seemed to help you alot.I have the same engine and a 14ft tracker Jon and a 16ft Lowe big Jon and I'm gonna order the same prop and try it.Also have a 25 Johnson too and I can use the prop on both.I hope my results are as good as yours!

@CampCatch 2 года назад

That 25 is the same engine as well with a smaller carb and intake plenum.

@tintdr Год назад

How did the stainless prop work out for you?

@CampCatch Год назад

@@tintdr it made a huge improvement, but its hard to say if thats due to the wear on the aluminum or because the stainless is just that much better.

@donniegray2288 Год назад

@@tintdr made a big difference but it’s having carb issues now I need to do some work on it and I’ve got so many it’s on the list lol

@bassmaster0570 2 года назад

Hey man I love the build and I have a 1436 Grumman that I’m building now and I have a 15 horse Johnson that I too out at 24.2 with I’m thinking about investing in a jackplate

@CampCatch 2 года назад

I love the onthefly plate. Follow recommended maintnence, spray grease the tube from the bottom every use and it holds up well.

@tategasek1719 Год назад

All you have to do is drop the tilt pin one spot closer to the transom. That should knock that porpoising right out

@SDGFL 2 года назад

Drop the motor tilt down one more hole to push the fron down and control the porpoising. Think of power trim down.

@CampCatch 2 года назад

My next day of testing should show different results as ive added tabs and fixed a plug wire that was robbing power and about 400rpms. i will play with using that last trim hole if needed.

@cadeherin188 Год назад

When you added the trim tabs after this did it help with the boat popping up and down love your boat man been looking for inspiration on how to build mine and you definitely hit the nail on the head👍one more question have to thought about putting float pods on the back like the mud boats just curious pros or cons

@CampCatch Год назад

Shortly after adding tabs i swapped to a built merc 25 so its very hard to say. The merc was a little faster and much stronger down low (due to being freshly built vs the worn out OMC). The tabs stopped the bouncing all together. Pods would have been my next move but i moved on to a bigger project and sold the Jon boat. I had a son and decided my free time would be spent with him rather then making youtube videos. I may vome back to it eventually once hes in school.

@josephauld6565 11 месяцев назад

Jack plate may help?

@maximumspeed04 Год назад

what kind of paint should i use to repaint my 16 ft job boat

@rickarndt3895 Год назад

That old Johnson has had it throw it overboard

@Dangbo3030 Год назад

It's still going as compared to the 4 strokes with inferior alloy. I had a mercury/tohatsu that was corroded inside the water jacket. I did buy a used Johnson/Suzuki 9.9 fresh water motor and I'm going to use it in both salt and fresh water. Definitely flush each use. I'll check it annually for degradation in the water passages.

@RossHooge 2 года назад

Where can I find a jack plate like that for my Jon Boat? I like the manual screw adjustment without using a wrench

@CampCatch 2 года назад

www.ontheflyjackplates.com On The Fly Jack Plates To be clear i have no affiliation with them but am impressed with their product.

@patrickfearon7942 2 года назад

Where are you based out of? I just got my first jon boat and liking your setup. I’m down in Boca Raton/Deerfield.

@CampCatch 2 года назад

Im up in Palm Harbor just north of clearwater

@takemechrome2291 Год назад

How much did the whole thing cost?

@jopark66 2 года назад

i have a 1542 jon boat with a 25hp 2 stroke yamaha. i get 28mph no sweat with me and my wife in there. also mine is decked so its a lot heavier than yours. the best i've ever done was 31mph going down river with the wind at my back. you need a wider boat, it'll sit higher in the water and be faster

@CampCatch 2 года назад

The old OMC 35s were flywheel rated so the 35 is really more like 28hp in more modern stamdards. This boat has a merc 25 on it with some mods now, its considerably faster now. Also keep in mind that in this video i have 2 people and 60lbs of lead all the way up on the bow to keep the bow down, it has tabs now and levels out on its own.

@CampCatch 2 года назад

But speaking of a wider boat, i did get a wider boat, i got a 1648 fisher marine that im making plans for now.

@casper3130 Год назад

idk that metal looked like it wanted to fold up running across that water.. that might be a reason jon boats are motor rated.

@CampCatch Год назад

It flexed a lot even with a smaller engine. It never sprung a leak even later on with a stronger engine on it and significantly more speed (about 40mph) it was fine. Adding trim tabs made it much more managable.

@coltensawyer6761 8 месяцев назад

I’m doing the same thing with my 14 36 although I’m wanting and hoping to run a 670 predator long tail. How much does that motor weigh and does the transom flex ? How did you re enforce yours ? This is my first boat so learning as I go

@CampCatch 7 месяцев назад

no noticeable transom flex however the omc 35 is extremely light at about 125lbs. Your bigger issue is going to be floatation. I do not think a 1436 without pods will handle a 670 long tail. You will likely end up taking water over the transom with even the smallest waves.

@boostacoosta2505 Год назад

I’ve got a 14x36 flat bottom im setting up with a 85hp and steering wheel in nose of boat

@CampCatch Год назад

My 1436 wouldn't float an 85hp, maybe with some massive pods. If i stand in the back with the merc 25 i currently have on it theres like an inch from top of the transom to the water. Id love to see yours when done, im sure it will be a rocket ship.

@boostacoosta2505 Год назад

Mine must have taller edges I had a 10hp and with 3 200 pound guys in it, it was fine

@boostacoosta2505 Год назад

update guys i have the 85hp motor and am getting ready to mount it tomorrow will post video after its totally sorted out tuned and ready to race in the next couple weeks

@boostacoosta2505 Год назад

@@CampCatch i made note to send you a message / post video of my boat build when its done

@mchenryjeremy 13 дней назад

just need some trim tabs to kill the porpoising.

@mchenryjeremy 13 дней назад

you then mentioned about the trim tabs at the end haha

@stephenellis3609 2 года назад

Did you ever figure out that without the weight of someone in the front, holding the boat lower in the water and causing more drag, you could probably get over 40 out of it with the right trim?

@CampCatch 2 года назад

That old OMC was worn out bad and ended up coming apart. Its got a merc 25 on it not with .20 weiscos, boysen reeds and some light port work. It does 39 with just me in it now, and is limited by the prop.

@quentinsilas5912 5 месяцев назад

@@CampCatchwhere and who did the motor work? I have a 2001 mercury 25hp I’m wanting to get more speed out of

@CampCatch 5 месяцев назад

@@quentinsilas5912 HPS marine in Pasco county fl. in retrospect though going to a yamaha 3cyl 25 would have been cheaper and faster, especially if you have a bigger boat then the little low sided lowe 1436

@tooleyboi491 Год назад

What kind of jack plate is that?

@CampCatch Год назад

On the fly jackplate. I've got nothing but good things to say. I heard people's concerns about them but from personal experience they are awesome.

@tyler-xh4be 2 года назад

How’s the paint holding up?

@CampCatch 2 года назад

Perfectly. Its become very hard and its thick like an epoxy paint. Im very impressed.

@CampCatch 2 года назад

It did take a long time to fully cure, like a week.

@MrHabitat009 2 года назад

Bro I just worked on your neighbors floors. His name is Brian he lives on the opposite side of the street about 4 house down with that small sailboat on the driveway

@CampCatch 2 года назад

What are the odds. Thanks for checking out my channel.

@MrHabitat009 2 года назад

@@CampCatch yeah I was dude why does this look so familiar lol great video btw

@jamarwiggins9703 2 года назад

amazing how all these different trades of work just bring people together.

@rickarndt3895 Год назад

No you don't want to drop the motor 1pin you need to lift the motor off the stern 1" the object is not to put bow down you just need to keep it from porpoiseing and chine walking keep that bow up lift the motor up 1" or as high as you can without it cavitation trust me I worked for mercury racing team and try a couple different s s props

@knightcustombuilds6988 5 месяцев назад

Agreed,the small v spray coming from the back tells me thd motor was too low.

@cadbury4160 2 года назад

My 1436 with a 15hp evinrude will do 27mph without a jack plate. I think I could hit 30 with a jp

@CampCatch 2 года назад

I know a guy in one of the OMC groups on facebook has a modded 15 all dialed in on a 1436 and does just over 30.

@johns.6570 2 года назад

What pitch was your stainless prop?

@CampCatch 2 года назад

15 pitch

@johns.6570 2 года назад

Interesting I ran a old school 35hp on my rib inflatable with a aluminum 10x15 prop, made 36mph, I ran a stainless and got 35 mph, I’m thinking perhaps a stainless is too heavy for the motor to spin and thus the less speed, I don’t know for sure, I read that stainless steel props only really make a difference on motors 60hp and up I don’t know , can’t confirm this.

@CampCatch 2 года назад

@@johns.6570 not all stainless props are going to preform the same even with the same pitch and size. In my case the aluminum I swapped from was very worn out.

@johns.6570 2 года назад

@@CampCatch ya I noticed that, well it’s kinda a crap shoot anyway,but all good fun

@GtPhycs Год назад

amount of dumfukry is amazing

@rickarndt3895 Год назад

She would fly if you had a 40 mercury

@southernreelinngrillin9964 2 года назад

Wat hp is your boat rated for? I was sketchy bout running a 25 hp mine is rated for 15hp

@CampCatch 2 года назад

Originally rated for a 15 but ive made some modifications.

@h-townfishing1382 2 года назад

34 mph on a 14ft , fk yea lol. i go 20 mph on my 9.9 evinrude , that's a thrill at 34mph

@rslover65 2 года назад

How wide is your 14'? I've got a 14'x60" deep V with a 9.8 4 stroke tohatsu but I'm only getting 18 or so. Wondering if I should go up in pitch on the prop.

@vivimu 2 года назад

Lmao wearing gloves to go boating? That's a new one

@CampCatch 2 года назад

The tiller handle was shocking me without them due to a bad ground at the coil which ive since fixed.

@vivimu 2 года назад

@@CampCatch haha alright fair enough

@realtruth716 2 месяца назад

2 years later more of your sister please...

@5050fishing Год назад

I can go 23mph on my 1436 with a 9.9

@CampCatch Год назад

That old Johnson ended up having a damaged piston and low compression on one cylinder which is why it didn't run to its full potential. The boat runs about 40 now with a modified merc 25.

9:30

Testing 3 Props for the Best Top Speed! Tracker 1436 Jon Boat with 20hp Suzuki

Просмотров 5 тыс.