Build: The CL1 Vannystyle (with CaptainVanover)

Подписаться 275 тыс.

Просмотров 90 тыс.

50% 1

The CL1 Vannystyle with FETtec is Vanover's new ultimate freestyle kwad! In this video he’ll walk you through the build step by step!
Get the DIY kit here: rotorriot.com/products/vannys...
Don't want to build it yourself? We build and tune drones so you don't have to! Get this drone pre-built here:
rotorriot.com/products/vannys...
#FPVFREESTYLE
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com
Want to fly FPV like the pros? Start here:
learn.rotorriot.com
Looking for a PC to run the latest sim? We've got you covered:
rotorriot.com/products/the-ra...
Get Rotor Riot Apparel here:
rotorriot.com/merch
Get Rotor Riot Motors here:
rotorriot.com/hypetrain
Get Pre-Built Drones here:
rotorriot.com/collections/pre...
Check out the latest FPV Parts on the market:
rotorriot.com/new
Would you like a monthly goodie box?! Check out Kwad Box:
www.kwadbox.com/
- - - - - - - - - -
- Hosted By
Alex Vanover [CaptainVanover]
/ @captainvanover9237
-Production Team
Drew Camden - Producer
Christian Kapper - Editor / Camera
www.rotorriot.com

Развлечения

Опубликовано:

23 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 324

@LumpyFPV 3 года назад

Take a shot every time A dawg says LIKE SO 🙏🏻🤣

@doccock100 3 года назад

I tried this.. lost my eyesight at about 18min then woke up naked 3 days later in my garden.

@allennickles3970 3 года назад

Huge thanks for RR & Alex for making this video. They are a few videos about the Fettec stack that I know. But not a complete build video start to finish. And that is what makes this video special. Huge appreciation to RR & Alex for taking time out of there busy schedule and making this video. It will help a huge amount of builders like myself & the community. Again thanks a million guys😀

@jerryholmbeck9916 Год назад

I like this build video much more than any others that I have watched because he doesn't spend an unnecessary amount of time over explaining each part and each step makes sense... thanks for the vid :)

@savvyone2737 Год назад

I just bought the cl2 and am about to embark on my first fpv build. I really have enjoyed all these build and flying videos you guys make. Very informative and entertaining.

@mattwilson1305 3 года назад

Sweet build 🔥🤙glad to see this episode. Love Rotor Riot ❤

@jlarson42 3 года назад

Great build video. Love my Fettec build. Happy flying. 🤓

@MSR. 3 года назад

Always interesting to see how everyone builds 👍🤘👊🙌

@sodapanties 3 года назад

great video bro! just getting started and this has helped guide me in the right direction!

@Drawmaster33 3 года назад

Cool build! Nicely explained in your video.

@fpvraver Год назад

Awesome build tips !!!! I have 2 suggestions when mounting the vista or 03's with VHB use two piece of VHB and leave a space or channel for air circulation under the vista . Second, if anyone is objectionable to not using the two standoffs in the rear, you could drill a single hole in the center of the frame in the upper and lower plate, and use one standoff in the rear, which would give a decent amount of structural rigidity back to the rear box of the frame. Thanks for the bill tips Vanover I love to watch different peoples build suggestions !!!!

@tonypena1 3 года назад

Great Build Demo!

@RCRitterFPV 3 года назад

great info, I like you highlight the often skipped parts., the random hardware. yeah, the camera is moving a bit... but I can deal and it keeps some energy... like "dampen..." will go back and rewatch for sure, even if I don't build this exact quad.

@user-sy3qf2se2o 3 года назад

Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's

@user-sy3qf2se2o 3 года назад

AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅

@RenegadeFPV 3 года назад

Something something. Like so. Something like so. Something like this lol 😂 good build

@Holyfield 3 года назад

😂😂

@PortalFPV 3 года назад

once you notice it and can't be un-noticed o.O!

@jacksonmcdowell8144 3 года назад

Don't forget the actually

@viliusb1295 3 года назад

Me watching the whole video knowing that i cant aford it :D

@tahjibrahman8364 3 года назад

I watched the whole vid knowing not even what am I watching

@darkfitmc1754 3 года назад

@@tahjibrahman8364 lol same

@PaulHoskins-iamacup 3 года назад

I can't even fly this in Australia, and I can't afford it.

@magicsmokemitlothar7377 2 года назад

Same

@dmitrykuksin9040 2 года назад

Same

@jana171 3 года назад

Super Clean build, loved it. Also Kiss software seems quite nice.

@manuelsolano7525 3 года назад

Excellent build video very well explain. Than you

@qlbbl 3 года назад

Lol I soldered my bat leads backwards on my first build too! It’s like a right of passage.

@a.i.thinker4059 3 года назад

You don’t need to go back and forth between KISS GUI and FETtec configurator to check motors. You can do all ESC setup (except ESC orientation) on the FETtec configurator. Motor test is under telemetry page.

@F4R79 3 года назад

Nice build with a twist

@magicwings6210 3 года назад

Thats gonna be my next frame💪🏽🔥🔥🔥

@jololivares989 3 года назад

In no time FETTEC SOLD OUT EVERYWHERE!!

@maximusimany4275 3 года назад

Race day quad

@notsure1502 3 года назад

Thats because everyone who flys it has to buy replacements every few flights lol

@LuckyRotorsFPV 3 года назад

@@notsure1502 Nonono, I am ripping that Fettec Stuff with the smaller and lighter 35A Version on my 6S Apex Rig for at least 1 Year now (and I mean Ripping as you can see on my channel) and never had issues with Fettec. It´s ultra-reliable and the ESC holds up well even when I lose patience while turtling it out of heavy Tree branches ;)

@notsure1502 3 года назад

@@LuckyRotorsFPV I'm happy for you and your $1000 beater

@LuckyRotorsFPV 3 года назад

@@notsure1502 Hehe nononono not $1000000 it´s only 350-400 Bucks Bro

@seagullhunterfpv 3 года назад

Looks like a clean build. I've ordered the same FC and ESC for my Armattan Badger. I do have one question though. I've noticed that FETtec recommend using a Spike Absorber for that ESC. They didn't have any in stock anywhere so I haven't bothered buying one yet and I noticed they aren't used on this build. Are they important or worth getting or not?

@josh-westsidefly149 3 года назад

bout time some of you fellas started to venture into the FeTTec world ....welcome to the real deal !!

@rwb6635 3 года назад

Well that was very helpful

@AERR_FPV 3 года назад

Nice video Van

@Mangorille 3 года назад

One of those lock nuts is a different blue, triggering my OCD. Really tempted to try out the FETtec.

@notsure1502 3 года назад

Don't waste your money

@shtumpa1 3 года назад

Waste your money... Not .. It's great been using for 6 months ..

@Vizr 3 года назад

Follow on how to build FETTEc properly and never look back.

@100100freak 3 года назад

@@Vizr you still can't just solder or plug your vtx to the fettec fc or do you? Do you still need the osd and pdb? I simply dont have enough room for that in my reverb.. would love to try ot out though

@Vizr 3 года назад

@@100100freak Before I switched to digital, I ran telemetry warnings instead of OSD. However, I do have a FETTEC osd board I was going to run in an analog set up but it’s no longer needed because I’m switching to shark byte. I’ll be posting the parts in FPV groups on FB soon. And yes VTX plugs onto FETtec FC. Very easy.

@shilohstore6086 3 года назад

I haven't been back to rotor riot in a couple years or so who is this man where the boy used to be

@raulcolladopoyatos4542 3 года назад

The pids and rates don't appear in the description.....

@user-sy3qf2se2o 3 года назад

I will advise you to invest with manager kingston and earn huge like I do and he's currently handling my portfolio earning 200% profit with his strategies and guidance's you will achieve alot

@user-sy3qf2se2o 3 года назад

HIS AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅

@cyanmizu 3 года назад

@@user-sy3qf2se2o your account seems to maybe gotten hacked?

@imager09tube 3 года назад

Thanks, you are the man on this stuff - from Mantis max>

@WKfpv 3 года назад

Awesome to see a complete Fettec build video. How are you mounting the gopro Alex?

@dcfddw 3 года назад

cool see you out there

@rawpicsfpv3516 3 года назад

It´s not recommended to put the capacitor on the end of the battery wire. It should be as close to the ESC as possible!

@Vizr 3 года назад

90% of build have the cap connected to the XT. No issues.

@brendand.2269 3 года назад

This is technically true but unless your black boxing to log voltage spikes none of us are going to know the difference

@NickBusscher 3 года назад

@@Vizr my XT60 caps got quite hot after normal flights, added a small extra cap directly onto the ESC, no more issues. If your XT60 wire is short (like in this build video) you might be fine, with longer wire I don't recommend it.

@Vizr 3 года назад

@@NickBusscher I’ve always ran 14 gauge XT60s on power pads with 330uf caps and have never had a heating issue. I run the FETTEC 35a esc exclusively.

@rawpicsfpv3516 3 года назад

@@brendand.2269 untill your ESC burns out;)

@tango_sierra8608 3 года назад

You didn’t list the PIDs or rates in the description !

@MeadowlarkFPV 3 года назад

I think you can find them in the rotor riot store along with the other pilots

@elxero2189 3 года назад

Had three screws on my new build day before yesterday... I spent 4 horus last night repairing one of my motors because of that. It flew great till it hit the ground low and fast. Motor came loose twisted and broke all three leads so I had to take it apart find new motor wire inorder to extend the motor wires right from the stator. They don't make those motors any more and a new one was crazy priced. So ya.. imma stick with 4 screws bro lol

@RCnerd74 3 года назад

I'm really curious about the FETtec stack. Back to KISS

@FeliXGamR-Jp 2 года назад

Question? I am just getting into my 1st build, I noticed you put Esc with motor solder terminals forward & reverse facing as opposed to left & right. Is their a specific reason for this or just protecting the wires in case of crash or impact?

@MrPaulielie 3 года назад

Nice 👍 keep it up cheers 🍻

@overfly_pt 3 года назад

Hello champion Cool vídeo and subbed 🤜🤛👍🔝

@EthanMitchell_YouTube 3 года назад

CLI Dump?? No Link in the description. Please add.

@user-sy3qf2se2o 3 года назад

Appreciate your review feel free to contact me for assistance and further details information

@user-sy3qf2se2o 3 года назад

AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 For trading guidelines

@JsBlazIN 2 года назад

Cool video helps A lot ! LIKE SO !

@1baggy0dodo4u 3 года назад

Curious about suggested battery mAh, weight of the build, and all up weight.

@moayed70 3 года назад

Well done Alex and all Rotor Riots guys. 👍 just wondering do you ship to Australia 🇦🇺?

@andrewlittleton2209 2 года назад

Finally got your kit where can I find your PIDs? I don’t see them in the description.

@dandan1364 3 года назад

Where are the PIDS, cli dump, rates ... please add to description :-)

@humbertocortes68 3 года назад

Hi Van, sorry in the store not appear the rx tbs tracer option in a prebuild model contents.... And it not any mention about this.... How is it??

@DoubleA_AMAfpv 3 года назад

Good job on the build video, Alex!

@shannoncai2252 3 года назад

I can’t use the Fettec ESC configurator for some reason. It keeps saying no ESC found. Any suggestion?

@scottmilano2940 2 года назад

For the FC to ESC connection is it better to connect for Fettec OneWire or for Dshot?

@jonscot8393 3 года назад

I'm going to put CRICKET motors on as they're exactly the same as Vanovers (except color) but cheaper according to RR.

@sundards9613 3 года назад

Need this badboy

@OriginaldoBo 3 года назад

when you gotta build a drone and make it to H&R block in 45mins

@viliusb1295 3 года назад

Does only Vista fits? Can you fit the biger one too?

@DavidOwensuk 3 года назад

Nice quad build Vanny, how many motor screws does the DRL racer 4 use?

@ironbeagle1610 2 года назад

well, I would assume it uses quite a few, but im assuming vanover replaces them all with double sided tape in order to save that extra little bit of weight. (jk)

@CF_Joel 3 года назад

Sweet! I want to do THIS one. Any suggestions for an analogue option?

@ironbeagle1610 2 года назад

same question here, how would I go about making this analog.

@gqp4800 3 года назад

Nice kwad

@brendand.2269 3 года назад

Nice build Vanny. I like how you’re making it pretty light and yet it’s dji with some little extra beef in the motors

@dauntlessfpv 3 года назад

Yeah uses a crazy heavy frame and heavy motors and kwad skids and somehow he still comes out at 630g au.

@ratititat-rcflyer5139 3 года назад

This frame Rocks i'm on my second build with it I totally believe the 630g without go pro Mine is 661g RTF with gopro session, Jb f7 flight stack, tbs unify pro hv, newbee drone flow 2306.5 2450kv motors, foxeer trex micro, tbs rx, talon faf series 1300mah 125c 5s lipo 175g, rotor riot skids session and sma mount I used 25mm stand offs and dropped top deck down 5mm UAv tech pre sets with some minor changes so i have around $375 into the quad its a bad mofo on 2450kv motors 5s cut to 90% in beta flight

@vollmtorify 3 года назад

Jo, where can i get your PID‘s. I‘ve orderd a build pack. But i will also test your settings. I can‘t find this link in the discription.

@user-sy3qf2se2o 3 года назад

Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's

@user-sy3qf2se2o 3 года назад

HIS AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅

@TheMono25 2 года назад

what is the best to order for my cl1 kit im about to order FrSky XM+ FlySky FS-X14S

@scottyrusin6305 3 года назад

Where is the link to the pids?

@notsure1502 3 года назад

Does that Flight controller and ESC come with any of the neccesary Wiring, Screws, Manuals.... OR ANYTHING????

@Gzz.. 3 года назад

Fc comes with nothing. Esc comes with a cap and wire harness to connect to the fc that’s it

@Jensen8333 3 года назад

Did Alex have church scheduled after this shoot? Looks too formal to slap a drone together😂

@robertfpv4043 3 года назад

Or a date????

@ehunter2010ed 3 года назад

@@robertfpv4043 Date with Drew for the poo!!

@matthew04101 3 года назад

don't know which church you're going to. but that is not a formal shirt for church or any event. it's more like casual.

@CarlPaulsen 3 года назад

You mean he just doesn't look homeless, like the rest of them? :-D

@acrocheezefpv 3 года назад

like so

@budhaditya 3 года назад

Please dont shoot build videos handheld, this gave me motion sickness lol

@LutherFPV 3 года назад

and you're into fpv?? gotta deal with that motion sickness lol

@budhaditya 3 года назад

@@LutherFPV I expect it on FPV, not when I'm sitting on my ass watching youtube lol

@chrisw3493 3 года назад

I liked it shot like this because with a static over head view you dont always get a good perspective of what they are doing. This way the camera man could get the best angle and zoom in. If you want it done a certain way do it yourself, dont try and make others do it the way you want it done. The world doesnt revolve around you.

@r3ck17rick7 3 года назад

wait...so do you chase after your own kwad when flying fpv? ngl great idea for a hardwired video feed

@budhaditya 3 года назад

@@r3ck17rick7 You dont? That's how I train

@rbrites29 3 года назад

Any chance this being availalble in Europe as well?

@martinfpv5 3 года назад

Why don't you use Fettecs Onewire connection?

@FlyingRun 3 года назад

I just ordered Fettec FC+ESC , i wanted to give it a try since quite a while ;D and you helped me to take the decision. Is it possible to see your pids/settings ?

@FlyingRun 3 года назад

@@adamjosey1543 i mounted the drone, but the FC seems to be dead...ffs at that price that's a pain in the ass. it is very weird, i cant connect to it, while i did activated and updated it, i think it might have burned cause of the air unit i'm not sure

@snakeyefpv 2 года назад

@@adamjosey1543 there are only betaflight PIDs and Settings 2 find - where is the good fettec stuff??

@archonoff Год назад

@@snakeyefpv same here. did you finally managed to find the vanover's pids?

@snakeyefpv Год назад

@@archonoff not really, but the preset's work well too...

@pedronhfd6969 3 года назад

NO PID's that’s bull S.....

@danielhellstrom7662 3 года назад

43:12 Alex: click ”I know what Im doing” Me: ....🧐..... ’Click’ 🥴🥴

@user-sy3qf2se2o 3 года назад

Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's

@user-sy3qf2se2o 3 года назад

AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅

@onnovannoort7690 3 года назад

Thanks for this great build, learning a lot about Fettec and kiss!

@muhammadqaisarali 2 года назад

I watched the whole video in the search of rates, vanover told that dump file will be in description, but unfortunately I didn't found... If anyone can provide, I would be highly thankful..

@GioFpv 3 года назад

what is the difference between the CL1-vs and the HD1-vs?

@dougpuntokz 3 года назад

Wish this one have analog version kit.

@EricRobb 3 года назад

At least the kit should have the option.

@axlfn8031 2 года назад

Can you guys make one where we can just buy this exact drone just pre built?

@pgabrieli 2 года назад

where is the CLI dump with your settings? thanks!

@biggfpv2721 3 года назад

Vanover what are ur pids for the setup?

@bengmo64 3 года назад

Tempting me to try Fettec, but that 45a ESC costs almost twice much as my favorite FC+ESC combo. All their stuff is premium with price to match I guess

@pedronhfd6969 3 года назад

my friend that esc is the best esc in the industry right now. Flies like a dream

@Matt-xy6cf 2 года назад

@@pedronhfd6969 Some think cause its 45amp it isnt as capable but that is WRONG. Id rather use this ESC than a zeus 60amp or T-motor 55amp pro or like wise. Would you also agree?

@sundards9613 3 года назад

It's possible to get or shipped this kit in to India..?

@RCRitterFPV 3 года назад

3M or 3mm double sided tape?

@ivicanikolic034 3 года назад

One mistake. There are no replacement pads for the connector that you used for Vista. I ripped it out, damaged traces, and now i cant use that serial port... You have the other two serials on the top, but in my case, they are occupied by crossfire and gps... So, no replacement for that connector rx and tx, unfortunately... :(

@laytonblance 3 года назад

Even though I don’t have the money to build this quad I’m glad I watched this because I got one amazing tip from it. I ordered some of those fc isolation rubber screws and they work amazing! That one thing alone cut my prop wash in half at least! Thanks!

@100100freak 3 года назад

Please do an analogue one. With fettec osd.

@mark28ten 3 года назад

Where are the PIDS? They aren't on the website...

@jeftesantiago 2 года назад

How many grams does it weight including battery and GoPro?

@Slrp 3 года назад

I want to build this quad; but analog! thoughts?

@turb0m0nk3y 3 года назад

Go ahead :)

@muhammadhazriq2259 3 года назад

so you back with fettec? no more flightone?

@InMyPajams310 3 года назад

No OSD board? Can you still pass through LQ from crossfire using aux 4 etc...?

@OriginaldoBo 3 года назад

If you use dji and run the latest firmware you get voltage and amps along with RSSI which is basically link quality in your OSD

@InMyPajams310 3 года назад

@@OriginaldoBo Thanks! Does it just pass through on an Aux channel? So I can pass through LQ instead of RSSI?

@mattiagatti1200 2 года назад

@@OriginaldoBo How can I pass LQ?

@timhamlinofficial 2 года назад

Is there a link to the pids

@ThaReilDeal 3 года назад

what happens if you out 2 capacitors on a drone?

@patriciascheer6531 3 года назад

Hi Alex, how about a Parts List and your pids and rates?

@user-sy3qf2se2o 3 года назад

Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's

@user-sy3qf2se2o 3 года назад

AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 For trading guidelines

@patriciascheer6531 3 года назад

Sorry, but i don‘t use WhatsApp.

@user-sy3qf2se2o 3 года назад

@@patriciascheer6531 you can get what's app from your play store

@patriciascheer6531 3 года назад

Ja, thanks I know! I don’t use it for savety reasons! Would be to Easy to put it in the video Description! Everybody does! JB, Steele!

@ichi1082 3 года назад

29:30 you mean on the VTX?

@sk1fpv 3 года назад

Ill get your logo tattooed for a set of DJI goggles.

@djabel702 3 года назад

followed his instruction, but I can't seem to map the motors through the KISS GUI, don't know what to do.

@cafub2650 3 года назад

How is your ESC Mounted, ?

@djabel702 3 года назад

@@cafub2650 I figured it out, it was very noob of me lol. I had my esc mounted CCW and Vanover had his ESC mounted CW , and in my head I followed it correctly. Thought I did something wrong lol!

@cyanmizu 3 года назад

Wheres the tune?

@philsm109rphilipstrom3 2 года назад

🤣🤣🤣🤣🤣🤣👌you made me laugh when you said that ....when soldering your xt60 place the lead in the hole to make it insecure instead of more secure 🤣🤣🤣🤣👌

@jeftesantiago 2 года назад

Well, he actually said “Nice and secure joint”!

@philsm109rphilipstrom3 2 года назад

@@jeftesantiago nooooo I just herd it again two more times in the area 🤣🤣 it was insecure lol

@jeftesantiago 2 года назад

@@philsm109rphilipstrom3 Let’s ask that to Vanny! He just was a little sick that day.

@philsm109rphilipstrom3 2 года назад

@@jeftesantiago it's okay 😁👍 no bid deal...just funny

@jeftesantiago 2 года назад

@@philsm109rphilipstrom3 Yeah I know! 🤣🤣🤣😂😂😂Just for fun!

@PodcastRewindss 3 года назад

i would love to have this drone. Sad that i cant afford it:(

@Mi78 3 года назад

Nazgul5 4s analog is the way to go

@MojoPapiFPV 3 года назад

Link to pids mentioned in video?

@user-sy3qf2se2o 3 года назад

Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's

@user-sy3qf2se2o 3 года назад

AVAILABLE ON Whats App ASSURED +_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅

@filiped7298 3 года назад

Where to get the CL1 in Europe?

@sjoervanderploeg4340 2 года назад

You are better off with "acetate cloth tape", that is the black stuff and it does not come loose over time like electrical tape tends to do!

@dandan1364 3 года назад

What props?

@joe72110 3 года назад

Can 't find the CLI Dump link!

@patriciascheer6531 3 года назад

There is no!

@timm1065 3 года назад

like the 3 YT video they said they would provide the rates and PIDs... yet they have not... IF they arent going to provide them, or at least host them on their website. Why even say you will??? Rotor Riot????